mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
965 lines
40 KiB
C
965 lines
40 KiB
C
/**
|
|
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include "soc/soc.h"
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** GPIO_EXT_CLOCK_GATE_REG register
|
|
* Clock Gating Configure Register
|
|
*/
|
|
#define GPIO_EXT_CLOCK_GATE_REG (DR_REG_GPIO_EXT_BASE + 0x0)
|
|
/** GPIO_EXT_CLK_EN : R/W; bitpos: [0]; default: 0;
|
|
* Clock enable bit of configuration registers for sigma delta modulation.
|
|
*/
|
|
#define GPIO_EXT_CLK_EN (BIT(0))
|
|
#define GPIO_EXT_CLK_EN_M (GPIO_EXT_CLK_EN_V << GPIO_EXT_CLK_EN_S)
|
|
#define GPIO_EXT_CLK_EN_V 0x00000001U
|
|
#define GPIO_EXT_CLK_EN_S 0
|
|
|
|
/** GPIO_EXT_PAD_COMP_CONFIG_0_REG register
|
|
* Configuration register for zero-crossing detection
|
|
*/
|
|
#define GPIO_EXT_PAD_COMP_CONFIG_0_REG (DR_REG_GPIO_EXT_BASE + 0x58)
|
|
/** GPIO_EXT_XPD_COMP_0 : R/W; bitpos: [0]; default: 0;
|
|
* Configures whether to enable the function of analog PAD voltage comparator.\\
|
|
* 0: Disable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_XPD_COMP_0 (BIT(0))
|
|
#define GPIO_EXT_XPD_COMP_0_M (GPIO_EXT_XPD_COMP_0_V << GPIO_EXT_XPD_COMP_0_S)
|
|
#define GPIO_EXT_XPD_COMP_0_V 0x00000001U
|
|
#define GPIO_EXT_XPD_COMP_0_S 0
|
|
/** GPIO_EXT_MODE_COMP_0 : R/W; bitpos: [1]; default: 0;
|
|
* Configures the reference voltage for analog PAD voltage comparater.. \\
|
|
* 0: Reference voltage is the internal reference voltage, meanwhile GPIO8 PAD can be
|
|
* used as a regular GPIO\\
|
|
* 1: Reference voltage is the voltage on the GPIO8 PAD\\
|
|
*/
|
|
#define GPIO_EXT_MODE_COMP_0 (BIT(1))
|
|
#define GPIO_EXT_MODE_COMP_0_M (GPIO_EXT_MODE_COMP_0_V << GPIO_EXT_MODE_COMP_0_S)
|
|
#define GPIO_EXT_MODE_COMP_0_V 0x00000001U
|
|
#define GPIO_EXT_MODE_COMP_0_S 1
|
|
/** GPIO_EXT_DREF_COMP_0 : R/W; bitpos: [4:2]; default: 0;
|
|
* Configures the internal reference voltage for analog PAD voltage coparator. \\
|
|
* 0: Internal reference voltage is 0 * VDDPST1\\
|
|
* 1: Internal reference voltage is 0.1 * VDDPST1\\
|
|
* ......\\
|
|
* 6: Internal reference voltage is 0.6 * VDDPST1\\
|
|
* 7: Internal reference voltage is 0.7 * VDDPST1\\
|
|
*/
|
|
#define GPIO_EXT_DREF_COMP_0 0x00000007U
|
|
#define GPIO_EXT_DREF_COMP_0_M (GPIO_EXT_DREF_COMP_0_V << GPIO_EXT_DREF_COMP_0_S)
|
|
#define GPIO_EXT_DREF_COMP_0_V 0x00000007U
|
|
#define GPIO_EXT_DREF_COMP_0_S 2
|
|
|
|
/** GPIO_EXT_PAD_COMP_FILTER_0_REG register
|
|
* Configuration register for interrupt source mask period of zero-crossing detection
|
|
*/
|
|
#define GPIO_EXT_PAD_COMP_FILTER_0_REG (DR_REG_GPIO_EXT_BASE + 0x5c)
|
|
/** GPIO_EXT_ZERO_DET_FILTER_CNT_0 : R/W; bitpos: [31:0]; default: 0;
|
|
* Configures the period of masking new interrupt source foe analog PAD voltage
|
|
* comparator.\\
|
|
* Measurement unit: IO MUX operating clock cycle\\
|
|
*/
|
|
#define GPIO_EXT_ZERO_DET_FILTER_CNT_0 0xFFFFFFFFU
|
|
#define GPIO_EXT_ZERO_DET_FILTER_CNT_0_M (GPIO_EXT_ZERO_DET_FILTER_CNT_0_V << GPIO_EXT_ZERO_DET_FILTER_CNT_0_S)
|
|
#define GPIO_EXT_ZERO_DET_FILTER_CNT_0_V 0xFFFFFFFFU
|
|
#define GPIO_EXT_ZERO_DET_FILTER_CNT_0_S 0
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH0_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH0_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x118)
|
|
/** GPIO_EXT_ETM_CH0_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH0_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH0_EVENT_SEL_M (GPIO_EXT_ETM_CH0_EVENT_SEL_V << GPIO_EXT_ETM_CH0_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH0_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH0_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH0_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH0_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH0_EVENT_EN_M (GPIO_EXT_ETM_CH0_EVENT_EN_V << GPIO_EXT_ETM_CH0_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH0_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH0_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH1_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH1_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x11c)
|
|
/** GPIO_EXT_ETM_CH1_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH1_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH1_EVENT_SEL_M (GPIO_EXT_ETM_CH1_EVENT_SEL_V << GPIO_EXT_ETM_CH1_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH1_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH1_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH1_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH1_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH1_EVENT_EN_M (GPIO_EXT_ETM_CH1_EVENT_EN_V << GPIO_EXT_ETM_CH1_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH1_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH1_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH2_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH2_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x120)
|
|
/** GPIO_EXT_ETM_CH2_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH2_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH2_EVENT_SEL_M (GPIO_EXT_ETM_CH2_EVENT_SEL_V << GPIO_EXT_ETM_CH2_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH2_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH2_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH2_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH2_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH2_EVENT_EN_M (GPIO_EXT_ETM_CH2_EVENT_EN_V << GPIO_EXT_ETM_CH2_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH2_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH2_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH3_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH3_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x124)
|
|
/** GPIO_EXT_ETM_CH3_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH3_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH3_EVENT_SEL_M (GPIO_EXT_ETM_CH3_EVENT_SEL_V << GPIO_EXT_ETM_CH3_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH3_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH3_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH3_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH3_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH3_EVENT_EN_M (GPIO_EXT_ETM_CH3_EVENT_EN_V << GPIO_EXT_ETM_CH3_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH3_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH3_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH4_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH4_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x128)
|
|
/** GPIO_EXT_ETM_CH4_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH4_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH4_EVENT_SEL_M (GPIO_EXT_ETM_CH4_EVENT_SEL_V << GPIO_EXT_ETM_CH4_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH4_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH4_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH4_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH4_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH4_EVENT_EN_M (GPIO_EXT_ETM_CH4_EVENT_EN_V << GPIO_EXT_ETM_CH4_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH4_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH4_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH5_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH5_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x12c)
|
|
/** GPIO_EXT_ETM_CH5_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH5_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH5_EVENT_SEL_M (GPIO_EXT_ETM_CH5_EVENT_SEL_V << GPIO_EXT_ETM_CH5_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH5_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH5_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH5_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH5_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH5_EVENT_EN_M (GPIO_EXT_ETM_CH5_EVENT_EN_V << GPIO_EXT_ETM_CH5_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH5_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH5_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH6_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH6_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x130)
|
|
/** GPIO_EXT_ETM_CH6_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH6_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH6_EVENT_SEL_M (GPIO_EXT_ETM_CH6_EVENT_SEL_V << GPIO_EXT_ETM_CH6_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH6_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH6_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH6_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH6_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH6_EVENT_EN_M (GPIO_EXT_ETM_CH6_EVENT_EN_V << GPIO_EXT_ETM_CH6_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH6_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH6_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_EVENT_CH7_CFG_REG register
|
|
* ETM configuration register for channel 0
|
|
*/
|
|
#define GPIO_EXT_ETM_EVENT_CH7_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x134)
|
|
/** GPIO_EXT_ETM_CH7_EVENT_SEL : R/W; bitpos: [4:0]; default: 0;
|
|
* Configures to select GPIO for ETM event channel.\\
|
|
* 0: Select GPIO0\\
|
|
* 1: Select GPIO1\\
|
|
* ......\\
|
|
* 23: Select GPIO23\\
|
|
* 24: Select GPIO24\\
|
|
* 25 ~ 31: Reserved\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH7_EVENT_SEL 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH7_EVENT_SEL_M (GPIO_EXT_ETM_CH7_EVENT_SEL_V << GPIO_EXT_ETM_CH7_EVENT_SEL_S)
|
|
#define GPIO_EXT_ETM_CH7_EVENT_SEL_V 0x0000001FU
|
|
#define GPIO_EXT_ETM_CH7_EVENT_SEL_S 0
|
|
/** GPIO_EXT_ETM_CH7_EVENT_EN : R/W; bitpos: [7]; default: 0;
|
|
* Configures whether or not to enable ETM event send.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_CH7_EVENT_EN (BIT(7))
|
|
#define GPIO_EXT_ETM_CH7_EVENT_EN_M (GPIO_EXT_ETM_CH7_EVENT_EN_V << GPIO_EXT_ETM_CH7_EVENT_EN_S)
|
|
#define GPIO_EXT_ETM_CH7_EVENT_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_CH7_EVENT_EN_S 7
|
|
|
|
/** GPIO_EXT_ETM_TASK_P0_CFG_REG register
|
|
* GPIO selection register 0 for ETM
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_P0_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x158)
|
|
/** GPIO_EXT_ETM_TASK_GPIO0_SEL : R/W; bitpos: [2:0]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO0.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_SEL_M (GPIO_EXT_ETM_TASK_GPIO0_SEL_V << GPIO_EXT_ETM_TASK_GPIO0_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_SEL_S 0
|
|
/** GPIO_EXT_ETM_TASK_GPIO0_EN : R/W; bitpos: [5]; default: 0;
|
|
* Configures whether or not to enable GPIO0 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_EN (BIT(5))
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_EN_M (GPIO_EXT_ETM_TASK_GPIO0_EN_V << GPIO_EXT_ETM_TASK_GPIO0_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO0_EN_S 5
|
|
/** GPIO_EXT_ETM_TASK_GPIO1_SEL : R/W; bitpos: [8:6]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO1.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_SEL_M (GPIO_EXT_ETM_TASK_GPIO1_SEL_V << GPIO_EXT_ETM_TASK_GPIO1_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_SEL_S 6
|
|
/** GPIO_EXT_ETM_TASK_GPIO1_EN : R/W; bitpos: [11]; default: 0;
|
|
* Configures whether or not to enable GPIO1 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_EN (BIT(11))
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_EN_M (GPIO_EXT_ETM_TASK_GPIO1_EN_V << GPIO_EXT_ETM_TASK_GPIO1_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO1_EN_S 11
|
|
/** GPIO_EXT_ETM_TASK_GPIO2_SEL : R/W; bitpos: [14:12]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO2.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_SEL_M (GPIO_EXT_ETM_TASK_GPIO2_SEL_V << GPIO_EXT_ETM_TASK_GPIO2_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_SEL_S 12
|
|
/** GPIO_EXT_ETM_TASK_GPIO2_EN : R/W; bitpos: [17]; default: 0;
|
|
* Configures whether or not to enable GPIO2 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_EN (BIT(17))
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_EN_M (GPIO_EXT_ETM_TASK_GPIO2_EN_V << GPIO_EXT_ETM_TASK_GPIO2_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO2_EN_S 17
|
|
/** GPIO_EXT_ETM_TASK_GPIO3_SEL : R/W; bitpos: [20:18]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO3.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_SEL_M (GPIO_EXT_ETM_TASK_GPIO3_SEL_V << GPIO_EXT_ETM_TASK_GPIO3_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_SEL_S 18
|
|
/** GPIO_EXT_ETM_TASK_GPIO3_EN : R/W; bitpos: [23]; default: 0;
|
|
* Configures whether or not to enable GPIO3 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_EN (BIT(23))
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_EN_M (GPIO_EXT_ETM_TASK_GPIO3_EN_V << GPIO_EXT_ETM_TASK_GPIO3_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO3_EN_S 23
|
|
/** GPIO_EXT_ETM_TASK_GPIO4_SEL : R/W; bitpos: [26:24]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO4.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_SEL_M (GPIO_EXT_ETM_TASK_GPIO4_SEL_V << GPIO_EXT_ETM_TASK_GPIO4_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_SEL_S 24
|
|
/** GPIO_EXT_ETM_TASK_GPIO4_EN : R/W; bitpos: [29]; default: 0;
|
|
* Configures whether or not to enable GPIO4 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_EN (BIT(29))
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_EN_M (GPIO_EXT_ETM_TASK_GPIO4_EN_V << GPIO_EXT_ETM_TASK_GPIO4_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO4_EN_S 29
|
|
|
|
/** GPIO_EXT_ETM_TASK_P1_CFG_REG register
|
|
* GPIO selection register 1 for ETM
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_P1_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x15c)
|
|
/** GPIO_EXT_ETM_TASK_GPIO5_SEL : R/W; bitpos: [2:0]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO5.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_SEL_M (GPIO_EXT_ETM_TASK_GPIO5_SEL_V << GPIO_EXT_ETM_TASK_GPIO5_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_SEL_S 0
|
|
/** GPIO_EXT_ETM_TASK_GPIO5_EN : R/W; bitpos: [5]; default: 0;
|
|
* Configures whether or not to enable GPIO5 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_EN (BIT(5))
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_EN_M (GPIO_EXT_ETM_TASK_GPIO5_EN_V << GPIO_EXT_ETM_TASK_GPIO5_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO5_EN_S 5
|
|
/** GPIO_EXT_ETM_TASK_GPIO6_SEL : R/W; bitpos: [8:6]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO6.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_SEL_M (GPIO_EXT_ETM_TASK_GPIO6_SEL_V << GPIO_EXT_ETM_TASK_GPIO6_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_SEL_S 6
|
|
/** GPIO_EXT_ETM_TASK_GPIO6_EN : R/W; bitpos: [11]; default: 0;
|
|
* Configures whether or not to enable GPIO6 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_EN (BIT(11))
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_EN_M (GPIO_EXT_ETM_TASK_GPIO6_EN_V << GPIO_EXT_ETM_TASK_GPIO6_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO6_EN_S 11
|
|
/** GPIO_EXT_ETM_TASK_GPIO7_SEL : R/W; bitpos: [14:12]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO7.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_SEL_M (GPIO_EXT_ETM_TASK_GPIO7_SEL_V << GPIO_EXT_ETM_TASK_GPIO7_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_SEL_S 12
|
|
/** GPIO_EXT_ETM_TASK_GPIO7_EN : R/W; bitpos: [17]; default: 0;
|
|
* Configures whether or not to enable GPIO7 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_EN (BIT(17))
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_EN_M (GPIO_EXT_ETM_TASK_GPIO7_EN_V << GPIO_EXT_ETM_TASK_GPIO7_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO7_EN_S 17
|
|
/** GPIO_EXT_ETM_TASK_GPIO8_SEL : R/W; bitpos: [20:18]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO8.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_SEL_M (GPIO_EXT_ETM_TASK_GPIO8_SEL_V << GPIO_EXT_ETM_TASK_GPIO8_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_SEL_S 18
|
|
/** GPIO_EXT_ETM_TASK_GPIO8_EN : R/W; bitpos: [23]; default: 0;
|
|
* Configures whether or not to enable GPIO8 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_EN (BIT(23))
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_EN_M (GPIO_EXT_ETM_TASK_GPIO8_EN_V << GPIO_EXT_ETM_TASK_GPIO8_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO8_EN_S 23
|
|
/** GPIO_EXT_ETM_TASK_GPIO9_SEL : R/W; bitpos: [26:24]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO9.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_SEL_M (GPIO_EXT_ETM_TASK_GPIO9_SEL_V << GPIO_EXT_ETM_TASK_GPIO9_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_SEL_S 24
|
|
/** GPIO_EXT_ETM_TASK_GPIO9_EN : R/W; bitpos: [29]; default: 0;
|
|
* Configures whether or not to enable GPIO9 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_EN (BIT(29))
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_EN_M (GPIO_EXT_ETM_TASK_GPIO9_EN_V << GPIO_EXT_ETM_TASK_GPIO9_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO9_EN_S 29
|
|
|
|
/** GPIO_EXT_ETM_TASK_P2_CFG_REG register
|
|
* GPIO selection register 2 for ETM
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_P2_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x160)
|
|
/** GPIO_EXT_ETM_TASK_GPIO10_SEL : R/W; bitpos: [2:0]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO10.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_SEL_M (GPIO_EXT_ETM_TASK_GPIO10_SEL_V << GPIO_EXT_ETM_TASK_GPIO10_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_SEL_S 0
|
|
/** GPIO_EXT_ETM_TASK_GPIO10_EN : R/W; bitpos: [5]; default: 0;
|
|
* Configures whether or not to enable GPIO10 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_EN (BIT(5))
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_EN_M (GPIO_EXT_ETM_TASK_GPIO10_EN_V << GPIO_EXT_ETM_TASK_GPIO10_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO10_EN_S 5
|
|
/** GPIO_EXT_ETM_TASK_GPIO11_SEL : R/W; bitpos: [8:6]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO11.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_SEL_M (GPIO_EXT_ETM_TASK_GPIO11_SEL_V << GPIO_EXT_ETM_TASK_GPIO11_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_SEL_S 6
|
|
/** GPIO_EXT_ETM_TASK_GPIO11_EN : R/W; bitpos: [11]; default: 0;
|
|
* Configures whether or not to enable GPIO11 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_EN (BIT(11))
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_EN_M (GPIO_EXT_ETM_TASK_GPIO11_EN_V << GPIO_EXT_ETM_TASK_GPIO11_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO11_EN_S 11
|
|
/** GPIO_EXT_ETM_TASK_GPIO12_SEL : R/W; bitpos: [14:12]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO12.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_SEL_M (GPIO_EXT_ETM_TASK_GPIO12_SEL_V << GPIO_EXT_ETM_TASK_GPIO12_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_SEL_S 12
|
|
/** GPIO_EXT_ETM_TASK_GPIO12_EN : R/W; bitpos: [17]; default: 0;
|
|
* Configures whether or not to enable GPIO12 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_EN (BIT(17))
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_EN_M (GPIO_EXT_ETM_TASK_GPIO12_EN_V << GPIO_EXT_ETM_TASK_GPIO12_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO12_EN_S 17
|
|
/** GPIO_EXT_ETM_TASK_GPIO13_SEL : R/W; bitpos: [20:18]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO13.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_SEL_M (GPIO_EXT_ETM_TASK_GPIO13_SEL_V << GPIO_EXT_ETM_TASK_GPIO13_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_SEL_S 18
|
|
/** GPIO_EXT_ETM_TASK_GPIO13_EN : R/W; bitpos: [23]; default: 0;
|
|
* Configures whether or not to enable GPIO13 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_EN (BIT(23))
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_EN_M (GPIO_EXT_ETM_TASK_GPIO13_EN_V << GPIO_EXT_ETM_TASK_GPIO13_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO13_EN_S 23
|
|
/** GPIO_EXT_ETM_TASK_GPIO14_SEL : R/W; bitpos: [26:24]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO14.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_SEL_M (GPIO_EXT_ETM_TASK_GPIO14_SEL_V << GPIO_EXT_ETM_TASK_GPIO14_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_SEL_S 24
|
|
/** GPIO_EXT_ETM_TASK_GPIO14_EN : R/W; bitpos: [29]; default: 0;
|
|
* Configures whether or not to enable GPIO14 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_EN (BIT(29))
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_EN_M (GPIO_EXT_ETM_TASK_GPIO14_EN_V << GPIO_EXT_ETM_TASK_GPIO14_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO14_EN_S 29
|
|
|
|
/** GPIO_EXT_ETM_TASK_P3_CFG_REG register
|
|
* GPIO selection register 3 for ETM
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_P3_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x164)
|
|
/** GPIO_EXT_ETM_TASK_GPIO15_SEL : R/W; bitpos: [2:0]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO15.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_SEL_M (GPIO_EXT_ETM_TASK_GPIO15_SEL_V << GPIO_EXT_ETM_TASK_GPIO15_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_SEL_S 0
|
|
/** GPIO_EXT_ETM_TASK_GPIO15_EN : R/W; bitpos: [5]; default: 0;
|
|
* Configures whether or not to enable GPIO15 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_EN (BIT(5))
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_EN_M (GPIO_EXT_ETM_TASK_GPIO15_EN_V << GPIO_EXT_ETM_TASK_GPIO15_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO15_EN_S 5
|
|
/** GPIO_EXT_ETM_TASK_GPIO16_SEL : R/W; bitpos: [8:6]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO16.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_SEL_M (GPIO_EXT_ETM_TASK_GPIO16_SEL_V << GPIO_EXT_ETM_TASK_GPIO16_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_SEL_S 6
|
|
/** GPIO_EXT_ETM_TASK_GPIO16_EN : R/W; bitpos: [11]; default: 0;
|
|
* Configures whether or not to enable GPIO16 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_EN (BIT(11))
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_EN_M (GPIO_EXT_ETM_TASK_GPIO16_EN_V << GPIO_EXT_ETM_TASK_GPIO16_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO16_EN_S 11
|
|
/** GPIO_EXT_ETM_TASK_GPIO17_SEL : R/W; bitpos: [14:12]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO17.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_SEL_M (GPIO_EXT_ETM_TASK_GPIO17_SEL_V << GPIO_EXT_ETM_TASK_GPIO17_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_SEL_S 12
|
|
/** GPIO_EXT_ETM_TASK_GPIO17_EN : R/W; bitpos: [17]; default: 0;
|
|
* Configures whether or not to enable GPIO17 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_EN (BIT(17))
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_EN_M (GPIO_EXT_ETM_TASK_GPIO17_EN_V << GPIO_EXT_ETM_TASK_GPIO17_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO17_EN_S 17
|
|
/** GPIO_EXT_ETM_TASK_GPIO18_SEL : R/W; bitpos: [20:18]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO18.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_SEL_M (GPIO_EXT_ETM_TASK_GPIO18_SEL_V << GPIO_EXT_ETM_TASK_GPIO18_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_SEL_S 18
|
|
/** GPIO_EXT_ETM_TASK_GPIO18_EN : R/W; bitpos: [23]; default: 0;
|
|
* Configures whether or not to enable GPIO18 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_EN (BIT(23))
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_EN_M (GPIO_EXT_ETM_TASK_GPIO18_EN_V << GPIO_EXT_ETM_TASK_GPIO18_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO18_EN_S 23
|
|
/** GPIO_EXT_ETM_TASK_GPIO19_SEL : R/W; bitpos: [26:24]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO19.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_SEL_M (GPIO_EXT_ETM_TASK_GPIO19_SEL_V << GPIO_EXT_ETM_TASK_GPIO19_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_SEL_S 24
|
|
/** GPIO_EXT_ETM_TASK_GPIO19_EN : R/W; bitpos: [29]; default: 0;
|
|
* Configures whether or not to enable GPIO19 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_EN (BIT(29))
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_EN_M (GPIO_EXT_ETM_TASK_GPIO19_EN_V << GPIO_EXT_ETM_TASK_GPIO19_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO19_EN_S 29
|
|
|
|
/** GPIO_EXT_ETM_TASK_P4_CFG_REG register
|
|
* GPIO selection register 4 for ETM
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_P4_CFG_REG (DR_REG_GPIO_EXT_BASE + 0x168)
|
|
/** GPIO_EXT_ETM_TASK_GPIO20_SEL : R/W; bitpos: [2:0]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO20.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_SEL_M (GPIO_EXT_ETM_TASK_GPIO20_SEL_V << GPIO_EXT_ETM_TASK_GPIO20_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_SEL_S 0
|
|
/** GPIO_EXT_ETM_TASK_GPIO20_EN : R/W; bitpos: [5]; default: 0;
|
|
* Configures whether or not to enable GPIO20 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_EN (BIT(5))
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_EN_M (GPIO_EXT_ETM_TASK_GPIO20_EN_V << GPIO_EXT_ETM_TASK_GPIO20_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO20_EN_S 5
|
|
/** GPIO_EXT_ETM_TASK_GPIO21_SEL : R/W; bitpos: [8:6]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO21.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_SEL_M (GPIO_EXT_ETM_TASK_GPIO21_SEL_V << GPIO_EXT_ETM_TASK_GPIO21_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_SEL_S 6
|
|
/** GPIO_EXT_ETM_TASK_GPIO21_EN : R/W; bitpos: [11]; default: 0;
|
|
* Configures whether or not to enable GPIO21 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_EN (BIT(11))
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_EN_M (GPIO_EXT_ETM_TASK_GPIO21_EN_V << GPIO_EXT_ETM_TASK_GPIO21_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO21_EN_S 11
|
|
/** GPIO_EXT_ETM_TASK_GPIO22_SEL : R/W; bitpos: [14:12]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO22.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_SEL_M (GPIO_EXT_ETM_TASK_GPIO22_SEL_V << GPIO_EXT_ETM_TASK_GPIO22_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_SEL_S 12
|
|
/** GPIO_EXT_ETM_TASK_GPIO22_EN : R/W; bitpos: [17]; default: 0;
|
|
* Configures whether or not to enable GPIO22 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_EN (BIT(17))
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_EN_M (GPIO_EXT_ETM_TASK_GPIO22_EN_V << GPIO_EXT_ETM_TASK_GPIO22_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO22_EN_S 17
|
|
/** GPIO_EXT_ETM_TASK_GPIO23_SEL : R/W; bitpos: [20:18]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO23.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_SEL_M (GPIO_EXT_ETM_TASK_GPIO23_SEL_V << GPIO_EXT_ETM_TASK_GPIO23_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_SEL_S 18
|
|
/** GPIO_EXT_ETM_TASK_GPIO23_EN : R/W; bitpos: [23]; default: 0;
|
|
* Configures whether or not to enable GPIO23 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_EN (BIT(23))
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_EN_M (GPIO_EXT_ETM_TASK_GPIO23_EN_V << GPIO_EXT_ETM_TASK_GPIO23_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO23_EN_S 23
|
|
/** GPIO_EXT_ETM_TASK_GPIO24_SEL : R/W; bitpos: [26:24]; default: 0;
|
|
* Configures to select an ETM task channel for GPIO24.\\
|
|
* 0: Select channel 0\\
|
|
* 1: Select channel 1\\
|
|
* ......\\
|
|
* 7: Select channel 7\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_SEL 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_SEL_M (GPIO_EXT_ETM_TASK_GPIO24_SEL_V << GPIO_EXT_ETM_TASK_GPIO24_SEL_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_SEL_V 0x00000007U
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_SEL_S 24
|
|
/** GPIO_EXT_ETM_TASK_GPIO24_EN : R/W; bitpos: [29]; default: 0;
|
|
* Configures whether or not to enable GPIO24 to response ETM task.\\
|
|
* 0: Not enable\\
|
|
* 1: Enable\\
|
|
*/
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_EN (BIT(29))
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_EN_M (GPIO_EXT_ETM_TASK_GPIO24_EN_V << GPIO_EXT_ETM_TASK_GPIO24_EN_S)
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_EN_V 0x00000001U
|
|
#define GPIO_EXT_ETM_TASK_GPIO24_EN_S 29
|
|
|
|
/** GPIO_EXT_INT_RAW_REG register
|
|
* GPIO_EXT interrupt raw register
|
|
*/
|
|
#define GPIO_EXT_INT_RAW_REG (DR_REG_GPIO_EXT_BASE + 0x1d0)
|
|
/** GPIO_EXT_COMP_NEG_0_INT_RAW : RO/WTC/SS; bitpos: [0]; default: 0;
|
|
* analog comparator pos edge interrupt raw
|
|
*/
|
|
#define GPIO_EXT_COMP_NEG_0_INT_RAW (BIT(0))
|
|
#define GPIO_EXT_COMP_NEG_0_INT_RAW_M (GPIO_EXT_COMP_NEG_0_INT_RAW_V << GPIO_EXT_COMP_NEG_0_INT_RAW_S)
|
|
#define GPIO_EXT_COMP_NEG_0_INT_RAW_V 0x00000001U
|
|
#define GPIO_EXT_COMP_NEG_0_INT_RAW_S 0
|
|
/** GPIO_EXT_COMP_POS_0_INT_RAW : RO/WTC/SS; bitpos: [1]; default: 0;
|
|
* analog comparator neg edge interrupt raw
|
|
*/
|
|
#define GPIO_EXT_COMP_POS_0_INT_RAW (BIT(1))
|
|
#define GPIO_EXT_COMP_POS_0_INT_RAW_M (GPIO_EXT_COMP_POS_0_INT_RAW_V << GPIO_EXT_COMP_POS_0_INT_RAW_S)
|
|
#define GPIO_EXT_COMP_POS_0_INT_RAW_V 0x00000001U
|
|
#define GPIO_EXT_COMP_POS_0_INT_RAW_S 1
|
|
/** GPIO_EXT_COMP_ALL_0_INT_RAW : RO/WTC/SS; bitpos: [2]; default: 0;
|
|
* analog comparator neg or pos edge interrupt raw
|
|
*/
|
|
#define GPIO_EXT_COMP_ALL_0_INT_RAW (BIT(2))
|
|
#define GPIO_EXT_COMP_ALL_0_INT_RAW_M (GPIO_EXT_COMP_ALL_0_INT_RAW_V << GPIO_EXT_COMP_ALL_0_INT_RAW_S)
|
|
#define GPIO_EXT_COMP_ALL_0_INT_RAW_V 0x00000001U
|
|
#define GPIO_EXT_COMP_ALL_0_INT_RAW_S 2
|
|
|
|
/** GPIO_EXT_INT_ST_REG register
|
|
* GPIO_EXT interrupt masked register
|
|
*/
|
|
#define GPIO_EXT_INT_ST_REG (DR_REG_GPIO_EXT_BASE + 0x1d4)
|
|
/** GPIO_EXT_COMP_NEG_0_INT_ST : RO; bitpos: [0]; default: 0;
|
|
* analog comparator pos edge interrupt status
|
|
*/
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ST (BIT(0))
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ST_M (GPIO_EXT_COMP_NEG_0_INT_ST_V << GPIO_EXT_COMP_NEG_0_INT_ST_S)
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ST_V 0x00000001U
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ST_S 0
|
|
/** GPIO_EXT_COMP_POS_0_INT_ST : RO; bitpos: [1]; default: 0;
|
|
* analog comparator neg edge interrupt status
|
|
*/
|
|
#define GPIO_EXT_COMP_POS_0_INT_ST (BIT(1))
|
|
#define GPIO_EXT_COMP_POS_0_INT_ST_M (GPIO_EXT_COMP_POS_0_INT_ST_V << GPIO_EXT_COMP_POS_0_INT_ST_S)
|
|
#define GPIO_EXT_COMP_POS_0_INT_ST_V 0x00000001U
|
|
#define GPIO_EXT_COMP_POS_0_INT_ST_S 1
|
|
/** GPIO_EXT_COMP_ALL_0_INT_ST : RO; bitpos: [2]; default: 0;
|
|
* analog comparator neg or pos edge interrupt status
|
|
*/
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ST (BIT(2))
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ST_M (GPIO_EXT_COMP_ALL_0_INT_ST_V << GPIO_EXT_COMP_ALL_0_INT_ST_S)
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ST_V 0x00000001U
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ST_S 2
|
|
|
|
/** GPIO_EXT_INT_ENA_REG register
|
|
* GPIO_EXT interrupt enable register
|
|
*/
|
|
#define GPIO_EXT_INT_ENA_REG (DR_REG_GPIO_EXT_BASE + 0x1d8)
|
|
/** GPIO_EXT_COMP_NEG_0_INT_ENA : R/W; bitpos: [0]; default: 1;
|
|
* analog comparator pos edge interrupt enable
|
|
*/
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ENA (BIT(0))
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ENA_M (GPIO_EXT_COMP_NEG_0_INT_ENA_V << GPIO_EXT_COMP_NEG_0_INT_ENA_S)
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ENA_V 0x00000001U
|
|
#define GPIO_EXT_COMP_NEG_0_INT_ENA_S 0
|
|
/** GPIO_EXT_COMP_POS_0_INT_ENA : R/W; bitpos: [1]; default: 1;
|
|
* analog comparator neg edge interrupt enable
|
|
*/
|
|
#define GPIO_EXT_COMP_POS_0_INT_ENA (BIT(1))
|
|
#define GPIO_EXT_COMP_POS_0_INT_ENA_M (GPIO_EXT_COMP_POS_0_INT_ENA_V << GPIO_EXT_COMP_POS_0_INT_ENA_S)
|
|
#define GPIO_EXT_COMP_POS_0_INT_ENA_V 0x00000001U
|
|
#define GPIO_EXT_COMP_POS_0_INT_ENA_S 1
|
|
/** GPIO_EXT_COMP_ALL_0_INT_ENA : R/W; bitpos: [2]; default: 1;
|
|
* analog comparator neg or pos edge interrupt enable
|
|
*/
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ENA (BIT(2))
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ENA_M (GPIO_EXT_COMP_ALL_0_INT_ENA_V << GPIO_EXT_COMP_ALL_0_INT_ENA_S)
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ENA_V 0x00000001U
|
|
#define GPIO_EXT_COMP_ALL_0_INT_ENA_S 2
|
|
|
|
/** GPIO_EXT_INT_CLR_REG register
|
|
* GPIO_EXT interrupt clear register
|
|
*/
|
|
#define GPIO_EXT_INT_CLR_REG (DR_REG_GPIO_EXT_BASE + 0x1dc)
|
|
/** GPIO_EXT_COMP_NEG_0_INT_CLR : WT; bitpos: [0]; default: 0;
|
|
* analog comparator pos edge interrupt clear
|
|
*/
|
|
#define GPIO_EXT_COMP_NEG_0_INT_CLR (BIT(0))
|
|
#define GPIO_EXT_COMP_NEG_0_INT_CLR_M (GPIO_EXT_COMP_NEG_0_INT_CLR_V << GPIO_EXT_COMP_NEG_0_INT_CLR_S)
|
|
#define GPIO_EXT_COMP_NEG_0_INT_CLR_V 0x00000001U
|
|
#define GPIO_EXT_COMP_NEG_0_INT_CLR_S 0
|
|
/** GPIO_EXT_COMP_POS_0_INT_CLR : WT; bitpos: [1]; default: 0;
|
|
* analog comparator neg edge interrupt clear
|
|
*/
|
|
#define GPIO_EXT_COMP_POS_0_INT_CLR (BIT(1))
|
|
#define GPIO_EXT_COMP_POS_0_INT_CLR_M (GPIO_EXT_COMP_POS_0_INT_CLR_V << GPIO_EXT_COMP_POS_0_INT_CLR_S)
|
|
#define GPIO_EXT_COMP_POS_0_INT_CLR_V 0x00000001U
|
|
#define GPIO_EXT_COMP_POS_0_INT_CLR_S 1
|
|
/** GPIO_EXT_COMP_ALL_0_INT_CLR : WT; bitpos: [2]; default: 0;
|
|
* analog comparator neg or pos edge interrupt clear
|
|
*/
|
|
#define GPIO_EXT_COMP_ALL_0_INT_CLR (BIT(2))
|
|
#define GPIO_EXT_COMP_ALL_0_INT_CLR_M (GPIO_EXT_COMP_ALL_0_INT_CLR_V << GPIO_EXT_COMP_ALL_0_INT_CLR_S)
|
|
#define GPIO_EXT_COMP_ALL_0_INT_CLR_V 0x00000001U
|
|
#define GPIO_EXT_COMP_ALL_0_INT_CLR_S 2
|
|
|
|
/** GPIO_EXT_PIN_CTRL_REG register
|
|
* Clock Output Configuration Register
|
|
*/
|
|
#define GPIO_EXT_PIN_CTRL_REG (DR_REG_GPIO_EXT_BASE + 0x1e0)
|
|
/** GPIO_EXT_CLK_OUT1 : R/W; bitpos: [4:0]; default: 0;
|
|
* If you want to output clock for I2S to CLK_OUT_out1, set this register to 0x0.
|
|
* CLK_OUT_out1 can be found in peripheral output signals.
|
|
*/
|
|
#define GPIO_EXT_CLK_OUT1 0x0000001FU
|
|
#define GPIO_EXT_CLK_OUT1_M (GPIO_EXT_CLK_OUT1_V << GPIO_EXT_CLK_OUT1_S)
|
|
#define GPIO_EXT_CLK_OUT1_V 0x0000001FU
|
|
#define GPIO_EXT_CLK_OUT1_S 0
|
|
/** GPIO_EXT_CLK_OUT2 : R/W; bitpos: [9:5]; default: 0;
|
|
* If you want to output clock for I2S to CLK_OUT_out2, set this register to 0x0.
|
|
* CLK_OUT_out2 can be found in peripheral output signals.
|
|
*/
|
|
#define GPIO_EXT_CLK_OUT2 0x0000001FU
|
|
#define GPIO_EXT_CLK_OUT2_M (GPIO_EXT_CLK_OUT2_V << GPIO_EXT_CLK_OUT2_S)
|
|
#define GPIO_EXT_CLK_OUT2_V 0x0000001FU
|
|
#define GPIO_EXT_CLK_OUT2_S 5
|
|
/** GPIO_EXT_CLK_OUT3 : R/W; bitpos: [14:10]; default: 0;
|
|
* If you want to output clock for I2S to CLK_OUT_out3, set this register to 0x0.
|
|
* CLK_OUT_out3 can be found in peripheral output signals.
|
|
*/
|
|
#define GPIO_EXT_CLK_OUT3 0x0000001FU
|
|
#define GPIO_EXT_CLK_OUT3_M (GPIO_EXT_CLK_OUT3_V << GPIO_EXT_CLK_OUT3_S)
|
|
#define GPIO_EXT_CLK_OUT3_V 0x0000001FU
|
|
#define GPIO_EXT_CLK_OUT3_S 10
|
|
|
|
/** GPIO_EXT_VERSION_REG register
|
|
* Version control register
|
|
*/
|
|
#define GPIO_EXT_VERSION_REG (DR_REG_GPIO_EXT_BASE + 0x1fc)
|
|
/** GPIO_EXT_DATE : R/W; bitpos: [27:0]; default: 37753392;
|
|
* Version control register.
|
|
*/
|
|
#define GPIO_EXT_DATE 0x0FFFFFFFU
|
|
#define GPIO_EXT_DATE_M (GPIO_EXT_DATE_V << GPIO_EXT_DATE_S)
|
|
#define GPIO_EXT_DATE_V 0x0FFFFFFFU
|
|
#define GPIO_EXT_DATE_S 0
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|