esp-idf/components/openthread/private_include/openthread-core-esp32x-mtd-config.h
Dávid Fehér d574cea5e5 fix(openthread): Fix openthread mtd joiner config
* Fix openthread-core-esp32x-mtd-config.h: OPENTHREAD_CONFIG_JOINER_ENABLE macro value

* On ESP32 MTD devices Joiner role functionality was not working even if 'Joiner enable' was checked in SDK config because 0 was defined in OPENTHREAD_CONFIG_JOINER_ENABLE macro. Value modified to 1 to resolve the issue. Tested and working on ESP32 H2 MTD device.

* Closes: https://github.com/espressif/esp-idf/pull/13473
2024-04-23 20:22:35 +08:00

320 lines
7.9 KiB
C

/*
* SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "sdkconfig.h"
/**
* @def OPENTHREAD_CONFIG_PLATFORM_INFO
*
* The platform-specific string to insert into the OpenThread version string.
*
*/
#define OPENTHREAD_CONFIG_PLATFORM_INFO CONFIG_IDF_TARGET
/**
* @def OPENTHREAD_CONFIG_PLATFORM_ASSERT_MANAGEMENT
*
* The assert is managed by platform defined logic when this flag is set.
*
*/
#define OPENTHREAD_CONFIG_PLATFORM_ASSERT_MANAGEMENT 1
/**
* @def OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE
*
* Define to 1 to enable otPlatFlash* APIs to support non-volatile storage.
*
* When defined to 1, the platform MUST implement the otPlatFlash* APIs instead of the otPlatSettings* APIs.
*
*/
#define OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE 0
/**
* @def OPENTHREAD_CONFIG_LOG_OUTPUT
*
* The ESP-IDF platform provides an otPlatLog() function.
*/
#define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
/**
* @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
*
* Configuration option to enable dynamic log level control.
*
*/
#define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC
/**
* @def OPENTHREAD_CONFIG_LOG_LEVEL
*
* The log level (used at compile time). If `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE` is set, this defines the most
* verbose log level possible. See `OPENTHREAD_CONFIG_LOG_LEVEL_INIT` to set the initial log level.
*
*/
#if OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
#define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_DEBG
#else
#define OPENTHREAD_CONFIG_LOG_LEVEL CONFIG_OPENTHREAD_LOG_LEVEL
#endif
#define OPENTHREAD_CONFIG_LOG_CLI 1
#define OPENTHREAD_CONFIG_LOG_PKT_DUMP 1
#define OPENTHREAD_CONFIG_LOG_PLATFORM 1
/**
* @def OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS
*
* The number of message buffers in buffer pool
*/
#define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS CONFIG_OPENTHREAD_NUM_MESSAGE_BUFFERS
/**
* @def OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE
*
* Enable the external heap.
*
*/
#ifndef OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE
#define OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE 1
#endif
/**
* @def OPENTHREAD_CONFIG_TCP_ENABLE
*
* Define to 0 to disable TCP
*
*/
#ifndef OPENTHREAD_CONFIG_TCP_ENABLE
#define OPENTHREAD_CONFIG_TCP_ENABLE 0
#endif
/**
* @def OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE
*
* Define to 1 to enable Thread Test Harness reference device support.
*
*/
#define OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 1
/**
* @def OPENTHREAD_CONFIG_NCP_SPI_ENABLE
*
* Define to 1 to enable NCP SPI support.
*
*/
#define OPENTHREAD_CONFIG_NCP_SPI_ENABLE 0
/**
* @def OPENTHREAD_ENABLE_NCP_SPINEL_ENCRYPTER
*
* Define to 1 to enable NCP Spinel Encrypter.
*
*/
#define OPENTHREAD_ENABLE_NCP_SPINEL_ENCRYPTER 0
/**
* @def OPENTHREAD_CONFIG_NCP_HDLC_ENABLE
*
* Define to 1 to enable NCP HDLC support.
*
*/
#define OPENTHREAD_CONFIG_NCP_HDLC_ENABLE 1
/**
* @def PACKAGE_NAME
*
* Define to the full name of this package.
*
*/
#define PACKAGE_NAME "openthread-esp32"
/**
* @def PACKAGE_STRING
*
* Define to the full name and version of this package.
*
*/
#define PACKAGE_STRING (PACKAGE_NAME " - " PACKAGE_VERSION)
/**
* @def OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS
*
* Define as 1 to enable bultin-mbedtls.
*
* Note that the OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS determines whether to use bultin-mbedtls as well as
* whether to manage mbedTLS internally, such as memory allocation and debug.
*
*/
#define OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS 0
/**
* @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE
*
* Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread.
*
*/
#define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1
/**
* @def OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS
*
* The maximum number of state-changed callback handlers (set using `otSetStateChangedCallback()`).
*
*/
#define OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS 3
/**
* @def OPENTHREAD_CONFIG_PLATFORM_RADIO_SPINEL_RX_FRAME_BUFFER_SIZE
*
* Specifies the rx frame buffer size used by `SpinelInterface` in RCP host code. This is applicable/used when
* `RadioSpinel` platform is used.
*
*/
#define OPENTHREAD_CONFIG_PLATFORM_RADIO_SPINEL_RX_FRAME_BUFFER_SIZE 1024
/**
* @def OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE
*
* Define as 1 to enable microsecond timer.
*
*/
#define OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE 1
/**
* @def OPENTHREAD_CONFIG_PING_SENDER_ENABLE
*
* Define to 1 to enable ping sender module.
*
* Ping sender module implements sending ICMPv6 Echo Request messages and processing ICMPv6 Echo Reply messages.
*
*/
#define OPENTHREAD_CONFIG_PING_SENDER_ENABLE 1
/**
* @def OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN
*
* The max length of the OpenThread dtls content buffer.
*
*/
#ifndef OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN
#define OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN 768
#endif
/**
* The configurable definitions via Kconfig
*/
#if CONFIG_OPENTHREAD_COMMISSIONER
#define OPENTHREAD_CONFIG_COMMISSIONER_ENABLE 0
#endif
#if CONFIG_OPENTHREAD_MACFILTER_ENABLE
#define OPENTHREAD_CONFIG_MAC_FILTER_ENABLE 1
#endif // CONFIG_OPENTHREAD_MACFILTER_ENABLE
#if CONFIG_OPENTHREAD_JOINER
#define OPENTHREAD_CONFIG_JOINER_ENABLE 1
#endif
#if CONFIG_OPENTHREAD_DIAG
#define OPENTHREAD_CONFIG_DIAG_ENABLE 1
#endif
#if CONFIG_OPENTHREAD_SRP_CLIENT
#ifndef OPENTHREAD_CONFIG_ECDSA_ENABLE
#define OPENTHREAD_CONFIG_ECDSA_ENABLE 1
#endif
#ifndef OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE
#define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 1
#endif
/**
* @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES
*
* Specifies number of service entries in the SRP client service pool.
*
* This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled.
*
*/
#define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES CONFIG_OPENTHREAD_SRP_CLIENT_MAX_SERVICES
#endif
/**
* @def OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE
*
* Define to 1 to enable DNS Client support.
*
*/
#define OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE CONFIG_OPENTHREAD_DNS_CLIENT
/**
* @def OPENTHREAD_CONFIG_TIME_SYNC_ENABLE
*
* Define as 1 to enable the time synchronization service feature.
*
*/
#if CONFIG_OPENTHREAD_TIME_SYNC
#define OPENTHREAD_CONFIG_TIME_SYNC_ENABLE 1
#endif
/**
* @def OPENTHREAD_CONFIG_RADIO_STATS_ENABLE
*
* Set to 1 to enable support for Radio Statistics. Note that this option only works for OPENTHREAD_FTD and
* OPENTHREAD_MTD.
*
*/
#if CONFIG_OPENTHREAD_RADIO_STATS_ENABLE
#define OPENTHREAD_CONFIG_RADIO_STATS_ENABLE 1
#endif
/**
* @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT
*
* The timeout value (in seconds) waiting for a address notification response after sending an address query.
*
*/
#ifndef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT CONFIG_OPENTHREAD_ADDRESS_QUERY_TIMEOUT
#endif
/**
* @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY
*
* Initial retry delay for address query (in seconds).
*
*/
#ifndef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY CONFIG_OPENTHREAD_ADDRESS_QUERY_RETRY_DELAY
#endif
/**
* @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY
*
* Maximum retry delay for address query (in seconds).
*
*/
#ifndef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY CONFIG_OPENTHREAD_ADDRESS_QUERY_MAX_RETRY_DELAY
#endif
/**
* @def OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT
*
* The maximum number of backoffs the CSMA-CA algorithm will attempt before declaring a channel access failure.
*
* Equivalent to macMaxCSMABackoffs in IEEE 802.15.4-2006, default value is 4.
*
*/
#ifndef OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT
#define OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT CONFIG_OPENTHREAD_MAC_MAX_CSMA_BACKOFFS_DIRECT
#endif
#define OPENTHREAD_MTD 1