esp-idf/components/heap/port/esp32h2/memory_layout.c
KonstantinKondrashov 6d0d2366f7 esp_hw_support: Fix invalid system time if s_esp_rtc_time_us & s_rtc_last_ticks were moved around
The commit fixes the case:
If variables in RTC RAM have been moved around by the linker,
they will be filled with garbage data. Any reset other than OTA would work fine
because the variables would still be initialized from the initial bootup.

So now system time will be valid even after OTA.

Closes https://github.com/espressif/esp-idf/issues/9448
2023-06-26 18:12:30 +08:00

108 lines
5.2 KiB
C

/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include <stdlib.h>
#include "esp_attr.h"
#include "sdkconfig.h"
#include "soc/soc.h"
#include "heap_memory_layout.h"
#include "esp_heap_caps.h"
/**
* @brief Memory type descriptors. These describe the capabilities of a type of memory in the SoC.
* Each type of memory map consists of one or more regions in the address space.
* Each type contains an array of prioritized capabilities.
* Types with later entries are only taken if earlier ones can't fulfill the memory request.
*
* - For a normal malloc (MALLOC_CAP_DEFAULT), give away the DRAM-only memory first, then pass off any dual-use IRAM regions, finally eat into the application memory.
* - For a malloc where 32-bit-aligned-only access is okay, first allocate IRAM, then DRAM, finally application IRAM.
* - Most other malloc caps only fit in one region anyway.
*
*/
/* Index of memory in `soc_memory_types[]` */
enum {
SOC_MEMORY_TYPE_DRAM = 0,
SOC_MEMORY_TYPE_STACK_DRAM = 1,
SOC_MEMORY_TYPE_DIRAM = 2,
SOC_MEMORY_TYPE_STACK_DIRAM = 3,
SOC_MEMORY_TYPE_RTCRAM = 4,
SOC_MEMORY_TYPE_NUM,
};
const soc_memory_type_desc_t soc_memory_types[SOC_MEMORY_TYPE_NUM] = {
// Type 0: DRAM
[SOC_MEMORY_TYPE_DRAM] = { "DRAM", { MALLOC_CAP_8BIT | MALLOC_CAP_DEFAULT, MALLOC_CAP_INTERNAL | MALLOC_CAP_DMA | MALLOC_CAP_32BIT, 0 }, false, false},
// Type 1: DRAM used for startup stacks
[SOC_MEMORY_TYPE_STACK_DRAM] = { "STACK/DRAM", { MALLOC_CAP_8BIT | MALLOC_CAP_DEFAULT, MALLOC_CAP_INTERNAL | MALLOC_CAP_DMA | MALLOC_CAP_32BIT, MALLOC_CAP_RETENTION }, false, true},
// Type 2: DRAM which has an alias on the I-port
[SOC_MEMORY_TYPE_DIRAM] = { "D/IRAM", { 0, MALLOC_CAP_DMA | MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL | MALLOC_CAP_DEFAULT, MALLOC_CAP_32BIT | MALLOC_CAP_EXEC }, true, false},
// Type 3: DIRAM used for startup stacks
[SOC_MEMORY_TYPE_STACK_DIRAM] = { "STACK/DIRAM", { MALLOC_CAP_8BIT | MALLOC_CAP_DEFAULT | MALLOC_CAP_RETENTION, MALLOC_CAP_EXEC | MALLOC_CAP_INTERNAL | MALLOC_CAP_DMA | MALLOC_CAP_32BIT, 0 }, true, true},
// Type 4: RTCRAM // TODO: IDF-5667 Better to rename to LPRAM
[SOC_MEMORY_TYPE_RTCRAM] = { "RTCRAM", { MALLOC_CAP_RTCRAM, MALLOC_CAP_8BIT | MALLOC_CAP_DEFAULT, MALLOC_CAP_INTERNAL | MALLOC_CAP_32BIT }, false, false},
};
#ifdef CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
#define SOC_MEMORY_TYPE_DEFAULT SOC_MEMORY_TYPE_DRAM
#define SOC_MEMORY_TYPE_STACK_DEFAULT SOC_MEMORY_TYPE_STACK_DRAM
#else
#define SOC_MEMORY_TYPE_DEFAULT SOC_MEMORY_TYPE_DIRAM
#define SOC_MEMORY_TYPE_STACK_DEFAULT SOC_MEMORY_TYPE_STACK_DIRAM
#endif
const size_t soc_memory_type_count = sizeof(soc_memory_types) / sizeof(soc_memory_type_desc_t);
/**
* @brief Region descriptors. These describe all regions of memory available, and map them to a type in the above type.
*
* @note Because of requirements in the coalescing code which merges adjacent regions,
* this list should always be sorted from low to high by start address.
*
*/
/**
* Register the shared buffer area of the last memory block into the heap during heap initialization
*/
#define APP_USABLE_DRAM_END (SOC_ROM_STACK_START - SOC_ROM_STACK_SIZE)
const soc_memory_region_t soc_memory_regions[] = {
{ 0x40800000, 0x10000, SOC_MEMORY_TYPE_DEFAULT, 0x40800000}, //D/IRAM level 0
{ 0x40810000, 0x10000, SOC_MEMORY_TYPE_DEFAULT, 0x40810000}, //D/IRAM level 1
{ 0x40820000, 0x10000, SOC_MEMORY_TYPE_DEFAULT, 0x40820000}, //D/IRAM level 2
{ 0x40830000, 0x10000, SOC_MEMORY_TYPE_DEFAULT, 0x40830000}, //D/IRAM level 3
{ 0x40840000, APP_USABLE_DRAM_END-0x40840000, SOC_MEMORY_TYPE_DEFAULT, 0x40840000}, //D/IRAM level 4
{ APP_USABLE_DRAM_END, (SOC_DIRAM_DRAM_HIGH-APP_USABLE_DRAM_END), SOC_MEMORY_TYPE_STACK_DEFAULT, APP_USABLE_DRAM_END}, //D/IRAM level 4
#ifdef CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP
{ 0x50000000, 0x1000, SOC_MEMORY_TYPE_RTCRAM, 0}, //Fast RTC memory
#endif
};
const size_t soc_memory_region_count = sizeof(soc_memory_regions) / sizeof(soc_memory_region_t);
extern int _data_start, _heap_start, _iram_start, _iram_end, _rtc_force_slow_end;
extern int _rtc_reserved_start, _rtc_reserved_end;
/**
* Reserved memory regions.
* These are removed from the soc_memory_regions array when heaps are created.
*
*/
// Static data region. DRAM used by data+bss and possibly rodata
SOC_RESERVE_MEMORY_REGION((intptr_t)&_data_start, (intptr_t)&_heap_start, dram_data);
// Target has a shared D/IRAM virtual address, no need to calculate I_D_OFFSET like previous chips
SOC_RESERVE_MEMORY_REGION((intptr_t)&_iram_start, (intptr_t)&_iram_end, iram_code);
#ifdef CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP
// TODO: IDF-6019 check reserved lp mem region
SOC_RESERVE_MEMORY_REGION(SOC_RTC_DRAM_LOW, (intptr_t)&_rtc_force_slow_end, rtcram_data);
#endif
SOC_RESERVE_MEMORY_REGION((intptr_t)&_rtc_reserved_start, (intptr_t)&_rtc_reserved_end, rtc_reserved_data);