alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
fabe338a7a
esp-idf/components/esp_psram/esp32/Kconfig.spiram
KonstantinKondrashov 1f9260d790 all: Apply new version logic (major * 100 + minor)
2022-11-03 08:36:23 +00:00

398 lines
19 KiB
Plaintext
Raw Blame History

config SPIRAM
bool "Support for external, SPI-connected RAM"
default "n"
help
This enables support for an external SPI RAM chip, connected in parallel with the
main SPI flash chip.
menu "SPI RAM config"
depends on SPIRAM
config SPIRAM_MODE_QUAD
bool
default "y"
choice SPIRAM_TYPE
prompt "Type of SPI RAM chip in use"
default SPIRAM_TYPE_AUTO
config SPIRAM_TYPE_AUTO
bool "Auto-detect"
config SPIRAM_TYPE_ESPPSRAM16
bool "ESP-PSRAM16 or APS1604"
config SPIRAM_TYPE_ESPPSRAM32
bool "ESP-PSRAM32"
config SPIRAM_TYPE_ESPPSRAM64
bool "ESP-PSRAM64 or LY68L6400"
endchoice
choice SPIRAM_SPEED
prompt "Set RAM clock speed"
default SPIRAM_SPEED_40M
help
Select the speed for the SPI RAM chip.
If SPI RAM is enabled, we only support three combinations of SPI speed mode we supported now:
1. Flash SPI running at 40Mhz and RAM SPI running at 40Mhz
2. Flash SPI running at 80Mhz and RAM SPI running at 40Mhz
3. Flash SPI running at 80Mhz and RAM SPI running at 80Mhz
Note: If the third mode(80Mhz+80Mhz) is enabled for SPI RAM of type 32MBit, one of the HSPI/VSPI host
will be occupied by the system. Which SPI host to use can be selected by the config item
SPIRAM_OCCUPY_SPI_HOST. Application code should never touch HSPI/VSPI hardware in this case. The
option to select 80MHz will only be visible if the flash SPI speed is also 80MHz.
(ESPTOOLPY_FLASHFREQ_80M is true)
config SPIRAM_SPEED_40M
bool "40MHz clock speed"
config SPIRAM_SPEED_80M
depends on ESPTOOLPY_FLASHFREQ_80M
bool "80MHz clock speed"
endchoice
config SPIRAM_SPEED
int
default 80 if SPIRAM_SPEED_80M
default 40 if SPIRAM_SPEED_40M
source "$IDF_PATH/components/esp_psram/Kconfig.spiram.common" # insert non-chip-specific items here
config SPIRAM_CACHE_WORKAROUND
bool "Enable workaround for bug in SPI RAM cache for Rev1 ESP32s"
depends on (SPIRAM_USE_MEMMAP || SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC) && (ESP32_REV_MIN_FULL < 300)
default "y"
help
Revision 1 of the ESP32 has a bug that can cause a write to PSRAM not to take place in some situations
when the cache line needs to be fetched from external RAM and an interrupt occurs. This enables a
fix in the compiler (-mfix-esp32-psram-cache-issue) that makes sure the specific code that is
vulnerable to this will not be emitted.
This will also not use any bits of newlib that are located in ROM, opting for a version that is
compiled with the workaround and located in flash instead.
The workaround is not required for ESP32 revision 3 and above.
menu "SPIRAM cache workaround debugging"
choice SPIRAM_CACHE_WORKAROUND_STRATEGY
prompt "Workaround strategy"
depends on SPIRAM_CACHE_WORKAROUND
default SPIRAM_CACHE_WORKAROUND_STRATEGY_MEMW
help
Select the workaround strategy. Note that the strategy for precompiled
libraries (libgcc, newlib, bt, wifi) is not affected by this selection.
Unless you know you need a different strategy, it's suggested you stay
with the default MEMW strategy. Note that DUPLDST can interfere with hardware
encryption and this will be automatically disabled if this workaround is selected.
'Insert nops' is the workaround that was used in older esp-idf versions. This workaround
still can cause faulty data transfers from/to SPI RAM in some situation.
config SPIRAM_CACHE_WORKAROUND_STRATEGY_MEMW
bool "Insert memw after vulnerable instructions (default)"
config SPIRAM_CACHE_WORKAROUND_STRATEGY_DUPLDST
bool "Duplicate LD/ST for 32-bit, memw for 8/16 bit"
config SPIRAM_CACHE_WORKAROUND_STRATEGY_NOPS
bool "Insert nops between vulnerable loads/stores (old strategy, obsolete)"
endchoice
#This needs to be Y only for the dupldst workaround
config SPIRAM_WORKAROUND_NEED_VOLATILE_SPINLOCK
bool
default "y" if SPIRAM_CACHE_WORKAROUND_STRATEGY_DUPLDST
endmenu
menu "SPIRAM workaround libraries placement"
visible if SPIRAM_CACHE_WORKAROUND
config SPIRAM_CACHE_LIBJMP_IN_IRAM
bool "Put libc's jump related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: longjmp and setjmp.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBMATH_IN_IRAM
bool "Put libc's math related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: abs, div, labs, ldiv, quorem, fpclassify,
and nan.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBNUMPARSER_IN_IRAM
bool "Put libc's number parsing related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: utoa, itoa, atoi, atol, strtol, and strtoul.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBIO_IN_IRAM
bool "Put libc's I/O related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: wcrtomb, fvwrite, wbuf, wsetup, fputwc, wctomb_r,
ungetc, makebuf, fflush, refill, and sccl.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBTIME_IN_IRAM
bool "Put libc's time related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: asctime, asctime_r, ctime, ctime_r, lcltime, lcltime_r,
gmtime, gmtime_r, strftime, mktime, tzset_r, tzset, time, gettzinfo, systimes, month_lengths,
timelocal, tzvars, tzlock, tzcalc_limits, and strptime.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBCHAR_IN_IRAM
bool "Put libc's characters related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: ctype_, toupper, tolower, toascii, strupr, bzero,
isalnum, isalpha, isascii, isblank, iscntrl, isdigit, isgraph, islower, isprint, ispunct,
isspace, and isupper.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBMEM_IN_IRAM
bool "Put libc's memory related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: memccpy, memchr memmove, and memrchr.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBSTR_IN_IRAM
bool "Put libc's string related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: strcasecmp, strcasestr, strchr, strcoll,
strcpy, strcspn, strdup, strdup_r, strlcat, strlcpy, strlen, strlwr, strncasecmp,
strncat, strncmp, strncpy, strndup, strndup_r, strrchr, strsep, strspn, strstr,
strtok_r, and strupr.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBRAND_IN_IRAM
bool "Put libc's random related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: srand, rand, and rand_r.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBENV_IN_IRAM
bool "Put libc's environment related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: environ, envlock, and getenv_r.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBFILE_IN_IRAM
bool "Put libc's file related functions in IRAM"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: lock, isatty, fclose, open, close, creat, read,
rshift, sbrk, stdio, syssbrk, sysclose, sysopen, creat, sysread, syswrite, impure, fwalk,
and findfp.
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
config SPIRAM_CACHE_LIBMISC_IN_IRAM
bool "Put libc's miscellaneous functions in IRAM, see help"
depends on SPIRAM_CACHE_WORKAROUND
default "y"
help
The functions affected by this option are: raise and system
Putting these function in IRAM will allow them to be called when flash cache is disabled
but it will also reduce the available size of free IRAM for the user application.
endmenu
config SPIRAM_BANKSWITCH_ENABLE
bool "Enable bank switching for >4MiB external RAM"
default y
depends on SPIRAM_USE_MEMMAP || SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC
help
The ESP32 only supports 4MiB of external RAM in its address space. The hardware does support larger
memories, but these have to be bank-switched in and out of this address space. Enabling this allows you
to reserve some MMU pages for this, which allows the use of the esp_himem api to manage these banks.
#Note that this is limited to 62 banks, as esp_psram_extram_writeback_cache needs some kind of mapping of
#some banks below that mark to work. We cannot at this moment guarantee this to exist when himem is
#enabled.
If spiram 2T mode is enabled, the size of 64Mbit psram will be changed as 32Mbit, so himem will be
unusable.
config SPIRAM_BANKSWITCH_RESERVE
int "Amount of 32K pages to reserve for bank switching"
depends on SPIRAM_BANKSWITCH_ENABLE
default 8
range 1 62
help
Select the amount of banks reserved for bank switching. Note that the amount of RAM allocatable with
malloc/esp_heap_alloc_caps will decrease by 32K for each page reserved here.
Note that this reservation is only actually done if your program actually uses the himem API. Without
any himem calls, the reservation is not done and the original amount of memory will be available
to malloc/esp_heap_alloc_caps.
config SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY
bool "Allow external memory as an argument to xTaskCreateStatic"
default n
depends on SPIRAM_USE_MALLOC
help
Because some bits of the ESP32 code environment cannot be recompiled with the cache workaround,
normally tasks cannot be safely run with their stack residing in external memory; for this reason
xTaskCreate (and related task creaton functions) always allocate stack in internal memory and
xTaskCreateStatic will check if the memory passed to it is in internal memory. If you have a task that
needs a large amount of stack and does not call on ROM code in any way (no direct calls, but also no
Bluetooth/WiFi), you can try enable this to cause xTaskCreateStatic to allow tasks stack in external
memory.
choice SPIRAM_OCCUPY_SPI_HOST
prompt "SPI host to use for 32MBit PSRAM"
default SPIRAM_OCCUPY_VSPI_HOST
depends on SPIRAM_SPEED_80M
help
When both flash and PSRAM is working under 80MHz, and the PSRAM is of type 32MBit, one of the HSPI/VSPI
host will be used to output the clock. Select which one to use here.
config SPIRAM_OCCUPY_HSPI_HOST
bool "HSPI host (SPI2)"
config SPIRAM_OCCUPY_VSPI_HOST
bool "VSPI host (SPI3)"
config SPIRAM_OCCUPY_NO_HOST
bool "Will not try to use any host, will abort if not able to use the PSRAM"
endchoice
menu "PSRAM clock and cs IO for ESP32-DOWD"
config D0WD_PSRAM_CLK_IO
int "PSRAM CLK IO number"
depends on SPIRAM
range 0 33
default 17
help
The PSRAM CLOCK IO can be any unused GPIO, user can config it based on hardware design. If user use
1.8V flash and 1.8V psram, this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
config D0WD_PSRAM_CS_IO
int "PSRAM CS IO number"
depends on SPIRAM
range 0 33
default 16
help
The PSRAM CS IO can be any unused GPIO, user can config it based on hardware design. If user use
1.8V flash and 1.8V psram, this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
endmenu
menu "PSRAM clock and cs IO for ESP32-D2WD"
config D2WD_PSRAM_CLK_IO
int "PSRAM CLK IO number"
depends on SPIRAM
range 0 33
default 9
help
User can config it based on hardware design. For ESP32-D2WD chip, the psram can only be 1.8V psram,
so this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
config D2WD_PSRAM_CS_IO
int "PSRAM CS IO number"
depends on SPIRAM
range 0 33
default 10
help
User can config it based on hardware design. For ESP32-D2WD chip, the psram can only be 1.8V psram,
so this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
endmenu
menu "PSRAM clock and cs IO for ESP32-PICO"
config PICO_PSRAM_CS_IO
int "PSRAM CS IO number"
depends on SPIRAM
range 0 33
default 10
help
The PSRAM CS IO can be any unused GPIO, user can config it based on hardware design.
For ESP32-PICO chip, the psram share clock with flash, so user do not need to configure the clock
IO.
For the reference hardware design, please refer to
https://www.espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf
endmenu
config SPIRAM_CUSTOM_SPIWP_SD3_PIN
bool "Use custom SPI PSRAM WP(SD3) Pin when flash pins set in eFuse (read help)"
depends on IDF_TARGET_ESP32 && (ESPTOOLPY_FLASHMODE_DIO || ESPTOOLPY_FLASHMODE_DOUT)
default y if SPIRAM_SPIWP_SD3_PIN != 7 # backwards compatibility, can remove in IDF 5
default n
help
This setting is only used if the SPI flash pins have been overridden by setting the eFuses
SPI_PAD_CONFIG_xxx, and the SPI flash mode is DIO or DOUT.
When this is the case, the eFuse config only defines 3 of the 4 Quad I/O data pins. The WP pin (aka
ESP32 pin "SD_DATA_3" or SPI flash pin "IO2") is not specified in eFuse. The psram only has QPI
mode, so a WP pin setting is necessary.
If this config item is set to N (default), the correct WP pin will be automatically used for any
Espressif chip or module with integrated flash. If a custom setting is needed, set this config item
to Y and specify the GPIO number connected to the WP pin.
When flash mode is set to QIO or QOUT, the PSRAM WP pin will be set the same as the SPI Flash WP pin
configured in the bootloader.
config SPIRAM_SPIWP_SD3_PIN
int "Custom SPI PSRAM WP(SD3) Pin"
depends on IDF_TARGET_ESP32 && (ESPTOOLPY_FLASHMODE_DIO || ESPTOOLPY_FLASHMODE_DOUT)
#depends on SPIRAM_CUSTOM_SPIWP_SD3_PIN # backwards compatibility, can uncomment in IDF 5
range 0 33
default 7
help
The option "Use custom SPI PSRAM WP(SD3) pin" must be set or this value is ignored
If burning a customized set of SPI flash pins in eFuse and using DIO or DOUT mode for flash, set this
value to the GPIO number of the SPIRAM WP pin.
config SPIRAM_2T_MODE
bool "Enable SPI PSRAM 2T mode"
depends on SPIRAM
default "n"
help
Enable this option to fix single bit errors inside 64Mbit PSRAM.
Some 64Mbit PSRAM chips have a hardware issue in the RAM which causes bit errors at multiple
fixed bit positions.
Note: If this option is enabled, the 64Mbit PSRAM chip will appear to be 32Mbit in size.
Applications will not be affected unless the use the esp_himem APIs, which are not supported
in 2T mode.
endmenu # "SPI RAM config"
Reference in New Issue View Git Blame Copy Permalink