esp-idf/components/soc/include/hal/rmt_hal.h
2019-11-20 10:54:21 +08:00

143 lines
4.5 KiB
C

// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include "soc/rmt_struct.h"
#include "soc/rmt_caps.h"
/**
* @brief HAL context type of RMT driver
*
*/
typedef struct {
rmt_dev_t *regs; /*!< RMT Register base address */
rmt_mem_t *mem; /*!< RMT Memory base address */
} rmt_hal_context_t;
#define RMT_MEM_OWNER_SW (0) /*!< RMT Memory ownership belongs to software side */
#define RMT_MEM_OWNER_HW (1) /*!< RMT Memory ownership belongs to hardware side */
/**
* @brief Initialize the RMT HAL driver
*
* @param hal: RMT HAL context
*/
void rmt_hal_init(rmt_hal_context_t *hal);
/**
* @brief Reset RMT HAL driver
*
* @param hal: RMT HAL context
*/
void rmt_hal_reset(rmt_hal_context_t *hal);
/**
* @brief Reset RMT Channel specific HAL driver
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
*/
void rmt_hal_channel_reset(rmt_hal_context_t *hal, uint32_t channel);
/**
* @brief Set counter clock for RMT channel
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param base_clk_hz: base clock for RMT internal channel (counter clock will divide from it)
* @param counter_clk_hz: target counter clock
*/
void rmt_hal_set_counter_clock(rmt_hal_context_t *hal, uint32_t channel, uint32_t base_clk_hz, uint32_t counter_clk_hz);
/**
* @brief Get counter clock for RMT channel
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param base_clk_hz: base clock for RMT internal channel (counter clock will divide from it)
* @return counter clock in Hz
*/
uint32_t rmt_hal_get_counter_clock(rmt_hal_context_t *hal, uint32_t channel, uint32_t base_clk_hz);
/**
* @brief Set carrier clock for RMT channel
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param base_clk_hz: base clock for RMT carrier generation (carrier clock will divide from it)
* @param carrier_clk_hz: target carrier clock
* @param carrier_clk_duty: duty ratio of carrier clock
*/
void rmt_hal_set_carrier_clock(rmt_hal_context_t *hal, uint32_t channel, uint32_t base_clk_hz, uint32_t carrier_clk_hz, float carrier_clk_duty);
/**
* @brief Get carrier clock for RMT channel
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param base_clk_hz: base clock for RMT carrier generation
* @param carrier_clk_hz: target carrier clock
* @param carrier_clk_duty: duty ratio of carrier clock
*/
void rmt_hal_get_carrier_clock(rmt_hal_context_t *hal, uint32_t channel, uint32_t base_clk_hz, uint32_t *carrier_clk_hz, float *carrier_clk_duty);
/**
* @brief Set filter threshold for RMT Receive channel
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param base_clk_hz: base clock for RMT receive filter
* @param thres_us: threshold of RMT receive filter, in us
*/
void rmt_hal_set_rx_filter_thres(rmt_hal_context_t *hal, uint32_t channel, uint32_t base_clk_hz, uint32_t thres_us);
/**
* @brief Set idle threshold for RMT Receive channel
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param base_clk_hz: base clock for RMT receive channel
* @param thres_us: IDLE threshold for RMT receive channel
*/
void rmt_hal_set_rx_idle_thres(rmt_hal_context_t *hal, uint32_t channel, uint32_t base_clk_hz, uint32_t thres_us);
/**
* @brief Receive a frame from RMT channel
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param buf: buffer to store received RMT frame
* @return number of items that get received
*/
uint32_t rmt_hal_receive(rmt_hal_context_t *hal, uint32_t channel, rmt_item32_t *buf);
/**
* @brief Transmit a from by RMT
*
* @param hal: RMT HAL context
* @param channel: RMT channel number
* @param src: RMT items to transmit
* @param length: length of RMT items to transmit
* @param offset: offset of RMT internal memory to store the items
*/
void rmt_hal_transmit(rmt_hal_context_t *hal, uint32_t channel, const rmt_item32_t *src, uint32_t length, uint32_t offset);
#ifdef __cplusplus
}
#endif