esp-idf/components/hal/esp32c2/efuse_hal.c
KonstantinKondrashov 2165ff386e hal: Explicit setting of efuse time settings
EFUSE_PWR_ON_NUM in C3 has default value = 0x2880, now = 0x3000
2023-05-12 21:42:38 +08:00

92 lines
2.4 KiB
C

/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include <sys/param.h>
#include "soc/soc_caps.h"
#include "hal/assert.h"
#include "hal/efuse_hal.h"
#include "hal/efuse_ll.h"
#include "hal/clk_tree_ll.h"
#include "esp_attr.h"
#define ESP_EFUSE_BLOCK_ERROR_BITS(error_reg, block) ((error_reg) & (0x0F << (4 * (block))))
IRAM_ATTR uint32_t efuse_hal_get_major_chip_version(void)
{
return efuse_ll_get_chip_wafer_version_major();
}
IRAM_ATTR uint32_t efuse_hal_get_minor_chip_version(void)
{
return efuse_ll_get_chip_wafer_version_minor();
}
/******************* eFuse control functions *************************/
void efuse_hal_set_timing(uint32_t apb_freq_hz)
{
(void) apb_freq_hz;
efuse_ll_set_dac_num(0xFF);
efuse_ll_set_dac_clk_div(0x28);
efuse_ll_set_pwr_on_num(0x3000);
efuse_ll_set_pwr_off_num(0x190);
int xtal = clk_ll_xtal_load_freq_mhz();
HAL_ASSERT(xtal == 40 || xtal == 26);
// for the XTAL = 40 MHz we use the default value = 200.
// XTAL = 26 MHz the value = 130.
efuse_ll_set_tpgm_inactive(xtal * 5);
}
void efuse_hal_read(void)
{
efuse_hal_set_timing(0);
efuse_ll_set_conf_read_op_code();
efuse_ll_set_read_cmd();
while (efuse_ll_get_read_cmd() != 0) { }
/*Due to a hardware error, we have to read READ_CMD again to make sure the efuse clock is normal*/
while (efuse_ll_get_read_cmd() != 0) { }
}
void efuse_hal_clear_program_registers(void)
{
ets_efuse_clear_program_registers();
}
void efuse_hal_program(uint32_t block)
{
efuse_hal_set_timing(0);
efuse_ll_set_conf_write_op_code();
efuse_ll_set_pgm_cmd(block);
while (efuse_ll_get_pgm_cmd() != 0) { }
efuse_hal_clear_program_registers();
efuse_hal_read();
}
void efuse_hal_rs_calculate(const void *data, void *rs_values)
{
ets_efuse_rs_calculate(data, rs_values);
}
/******************* eFuse control functions *************************/
bool efuse_hal_is_coding_error_in_block(unsigned block)
{
if (block == 0) {
return REG_READ(EFUSE_RD_REPEAT_ERR_REG) != 0;
} else if (block <= 3) {
// EFUSE_RD_RS_ERR_REG: (hi) ----, ----, ----, ----, ----, BLOCK3, BLOCK2, BLOCK1 (low)
uint32_t error_reg = REG_READ(EFUSE_RD_RS_ERR_REG);
return ESP_EFUSE_BLOCK_ERROR_BITS(error_reg, block - 1) != 0;
}
return false;
}