esp-idf/components/esp32/intr_alloc.c

916 lines
32 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "sdkconfig.h"
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include <esp_types.h>
#include "esp_err.h"
//#define LOG_LOCAL_LEVEL ESP_LOG_VERBOSE
#include "esp_log.h"
#include "esp_intr_alloc.h"
#include "esp_attr.h"
#include <limits.h>
#include <assert.h>
#if !CONFIG_FREERTOS_UNICORE
#include "esp_ipc.h"
#endif
static const char* TAG = "intr_alloc";
#define ETS_INTERNAL_TIMER0_INTR_NO 6
#define ETS_INTERNAL_TIMER1_INTR_NO 15
#define ETS_INTERNAL_TIMER2_INTR_NO 16
#define ETS_INTERNAL_SW0_INTR_NO 7
#define ETS_INTERNAL_SW1_INTR_NO 29
#define ETS_INTERNAL_PROFILING_INTR_NO 11
/*
Define this to debug the choices made when allocating the interrupt. This leads to much debugging
output within a critical region, which can lead to weird effects like e.g. the interrupt watchdog
being triggered, that is why it is separate from the normal LOG* scheme.
*/
//define DEBUG_INT_ALLOC_DECISIONS
#ifdef DEBUG_INT_ALLOC_DECISIONS
# define ALCHLOG(...) ESP_EARLY_LOGD(TAG, __VA_ARGS__)
#else
# define ALCHLOG(...) do {} while (0)
#endif
typedef enum {
INTDESC_NORMAL=0,
INTDESC_RESVD,
INTDESC_SPECIAL //for xtensa timers / software ints
} int_desc_flag_t;
typedef enum {
INTTP_LEVEL=0,
INTTP_EDGE,
INTTP_NA
} int_type_t;
typedef struct {
int level;
int_type_t type;
int_desc_flag_t cpuflags[2];
} int_desc_t;
//We should mark the interrupt for the timer used by FreeRTOS as reserved. The specific timer
//is selectable using menuconfig; we use these cpp bits to convert that into something we can use in
//the table below.
#if CONFIG_FREERTOS_CORETIMER_0
#define INT6RES INTDESC_RESVD
#else
#define INT6RES INTDESC_SPECIAL
#endif
#if CONFIG_FREERTOS_CORETIMER_1
#define INT15RES INTDESC_RESVD
#else
#define INT15RES INTDESC_SPECIAL
#endif
//This is basically a software-readable version of the interrupt usage table in include/soc/soc.h
const static int_desc_t int_desc[32]={
{ 1, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //0
{ 1, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //1
{ 1, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //2
{ 1, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //3
{ 1, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_NORMAL} }, //4
{ 1, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //5
{ 1, INTTP_NA, {INT6RES, INT6RES } }, //6
{ 1, INTTP_NA, {INTDESC_SPECIAL,INTDESC_SPECIAL}}, //7
{ 1, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //8
{ 1, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //9
{ 1, INTTP_EDGE , {INTDESC_NORMAL, INTDESC_NORMAL} }, //10
{ 3, INTTP_NA, {INTDESC_SPECIAL,INTDESC_SPECIAL}}, //11
{ 1, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //12
{ 1, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //13
{ 7, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //14, NMI
{ 3, INTTP_NA, {INT15RES, INT15RES } }, //15
{ 5, INTTP_NA, {INTDESC_SPECIAL,INTDESC_SPECIAL} }, //16
{ 1, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //17
{ 1, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //18
{ 2, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //19
{ 2, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //20
{ 2, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //21
{ 3, INTTP_EDGE, {INTDESC_RESVD, INTDESC_NORMAL} }, //22
{ 3, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_NORMAL} }, //23
{ 4, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_NORMAL} }, //24
{ 4, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //25
{ 5, INTTP_LEVEL, {INTDESC_NORMAL, INTDESC_RESVD } }, //26
{ 3, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //27
{ 4, INTTP_EDGE, {INTDESC_NORMAL, INTDESC_NORMAL} }, //28
{ 3, INTTP_NA, {INTDESC_SPECIAL,INTDESC_SPECIAL}}, //29
{ 4, INTTP_EDGE, {INTDESC_RESVD, INTDESC_RESVD } }, //30
{ 5, INTTP_LEVEL, {INTDESC_RESVD, INTDESC_RESVD } }, //31
};
typedef struct shared_vector_desc_t shared_vector_desc_t;
typedef struct vector_desc_t vector_desc_t;
struct shared_vector_desc_t {
int disabled: 1;
int source: 8;
volatile uint32_t *statusreg;
uint32_t statusmask;
intr_handler_t isr;
void *arg;
shared_vector_desc_t *next;
};
#define VECDESC_FL_RESERVED (1<<0)
#define VECDESC_FL_INIRAM (1<<1)
#define VECDESC_FL_SHARED (1<<2)
#define VECDESC_FL_NONSHARED (1<<3)
//Pack using bitfields for better memory use
struct vector_desc_t {
int flags: 16; //OR of VECDESC_FLAG_* defines
unsigned int cpu: 1;
unsigned int intno: 5;
int source: 8; //Interrupt mux flags, used when not shared
shared_vector_desc_t *shared_vec_info; //used when VECDESC_FL_SHARED
vector_desc_t *next;
};
struct intr_handle_data_t {
vector_desc_t *vector_desc;
shared_vector_desc_t *shared_vector_desc;
};
typedef struct non_shared_isr_arg_t non_shared_isr_arg_t;
struct non_shared_isr_arg_t {
intr_handler_t isr;
void *isr_arg;
int source;
};
//Linked list of vector descriptions, sorted by cpu.intno value
static vector_desc_t *vector_desc_head = NULL;
//This bitmask has an 1 if the int should be disabled when the flash is disabled.
static uint32_t non_iram_int_mask[portNUM_PROCESSORS];
//This bitmask has 1 in it if the int was disabled using esp_intr_noniram_disable.
static uint32_t non_iram_int_disabled[portNUM_PROCESSORS];
static bool non_iram_int_disabled_flag[portNUM_PROCESSORS];
#if CONFIG_SYSVIEW_ENABLE
extern uint32_t port_switch_flag[];
#endif
static portMUX_TYPE spinlock = portMUX_INITIALIZER_UNLOCKED;
//Inserts an item into vector_desc list so that the list is sorted
//with an incrementing cpu.intno value.
static void insert_vector_desc(vector_desc_t *to_insert)
{
vector_desc_t *vd=vector_desc_head;
vector_desc_t *prev=NULL;
while(vd!=NULL) {
if (vd->cpu > to_insert->cpu) break;
if (vd->cpu == to_insert->cpu && vd->intno >= to_insert->intno) break;
prev=vd;
vd=vd->next;
}
if ((vector_desc_head==NULL) || (prev==NULL)) {
//First item
to_insert->next = vd;
vector_desc_head=to_insert;
} else {
prev->next=to_insert;
to_insert->next=vd;
}
}
//Returns a vector_desc entry for an intno/cpu, or NULL if none exists.
static vector_desc_t *find_desc_for_int(int intno, int cpu)
{
vector_desc_t *vd=vector_desc_head;
while(vd!=NULL) {
if (vd->cpu==cpu && vd->intno==intno) break;
vd=vd->next;
}
return vd;
}
//Returns a vector_desc entry for an intno/cpu.
//Either returns a preexisting one or allocates a new one and inserts
//it into the list. Returns NULL on malloc fail.
static vector_desc_t *get_desc_for_int(int intno, int cpu)
{
vector_desc_t *vd=find_desc_for_int(intno, cpu);
if (vd==NULL) {
vector_desc_t *newvd=heap_caps_malloc(sizeof(vector_desc_t), MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT);
if (newvd==NULL) return NULL;
memset(newvd, 0, sizeof(vector_desc_t));
newvd->intno=intno;
newvd->cpu=cpu;
insert_vector_desc(newvd);
return newvd;
} else {
return vd;
}
}
//Returns a vector_desc entry for an source, the cpu parameter is used to tell GPIO_INT and GPIO_NMI from different CPUs
static vector_desc_t * find_desc_for_source(int source, int cpu)
{
vector_desc_t *vd=vector_desc_head;
while(vd!=NULL) {
if ( !(vd->flags & VECDESC_FL_SHARED) ) {
if ( vd->source == source && cpu == vd->cpu ) break;
} else if ( vd->cpu == cpu ) {
// check only shared vds for the correct cpu, otherwise skip
bool found = false;
shared_vector_desc_t *svd = vd->shared_vec_info;
assert(svd != NULL );
while(svd) {
if ( svd->source == source ) {
found = true;
break;
}
svd = svd->next;
}
if ( found ) break;
}
vd=vd->next;
}
return vd;
}
esp_err_t esp_intr_mark_shared(int intno, int cpu, bool is_int_ram)
{
if (intno>31) return ESP_ERR_INVALID_ARG;
if (cpu>=portNUM_PROCESSORS) return ESP_ERR_INVALID_ARG;
portENTER_CRITICAL(&spinlock);
vector_desc_t *vd=get_desc_for_int(intno, cpu);
if (vd==NULL) {
portEXIT_CRITICAL(&spinlock);
return ESP_ERR_NO_MEM;
}
vd->flags=VECDESC_FL_SHARED;
if (is_int_ram) vd->flags|=VECDESC_FL_INIRAM;
portEXIT_CRITICAL(&spinlock);
return ESP_OK;
}
esp_err_t esp_intr_reserve(int intno, int cpu)
{
if (intno>31) return ESP_ERR_INVALID_ARG;
if (cpu>=portNUM_PROCESSORS) return ESP_ERR_INVALID_ARG;
portENTER_CRITICAL(&spinlock);
vector_desc_t *vd=get_desc_for_int(intno, cpu);
if (vd==NULL) {
portEXIT_CRITICAL(&spinlock);
return ESP_ERR_NO_MEM;
}
vd->flags=VECDESC_FL_RESERVED;
portEXIT_CRITICAL(&spinlock);
return ESP_OK;
}
//Interrupt handler table and unhandled uinterrupt routine. Duplicated
//from xtensa_intr.c... it's supposed to be private, but we need to look
//into it in order to see if someone allocated an int using
//xt_set_interrupt_handler.
typedef struct xt_handler_table_entry {
void * handler;
void * arg;
} xt_handler_table_entry;
extern xt_handler_table_entry _xt_interrupt_table[XCHAL_NUM_INTERRUPTS*portNUM_PROCESSORS];
extern void xt_unhandled_interrupt(void * arg);
//Returns true if handler for interrupt is not the default unhandled interrupt handler
static bool int_has_handler(int intr, int cpu)
{
return (_xt_interrupt_table[intr*portNUM_PROCESSORS+cpu].handler != xt_unhandled_interrupt);
}
static bool is_vect_desc_usable(vector_desc_t *vd, int flags, int cpu, int force)
{
//Check if interrupt is not reserved by design
int x = vd->intno;
if (int_desc[x].cpuflags[cpu]==INTDESC_RESVD) {
ALCHLOG("....Unusable: reserved");
return false;
}
if (int_desc[x].cpuflags[cpu]==INTDESC_SPECIAL && force==-1) {
ALCHLOG("....Unusable: special-purpose int");
return false;
}
//Check if the interrupt level is acceptable
if (!(flags&(1<<int_desc[x].level))) {
ALCHLOG("....Unusable: incompatible level");
return false;
}
//check if edge/level type matches what we want
if (((flags&ESP_INTR_FLAG_EDGE) && (int_desc[x].type==INTTP_LEVEL)) ||
(((!(flags&ESP_INTR_FLAG_EDGE)) && (int_desc[x].type==INTTP_EDGE)))) {
ALCHLOG("....Unusable: incompatible trigger type");
return false;
}
//check if interrupt is reserved at runtime
if (vd->flags&VECDESC_FL_RESERVED) {
ALCHLOG("....Unusable: reserved at runtime.");
return false;
}
//Ints can't be both shared and non-shared.
assert(!((vd->flags&VECDESC_FL_SHARED)&&(vd->flags&VECDESC_FL_NONSHARED)));
//check if interrupt already is in use by a non-shared interrupt
if (vd->flags&VECDESC_FL_NONSHARED) {
ALCHLOG("....Unusable: already in (non-shared) use.");
return false;
}
// check shared interrupt flags
if (vd->flags&VECDESC_FL_SHARED ) {
if (flags&ESP_INTR_FLAG_SHARED) {
bool in_iram_flag=((flags&ESP_INTR_FLAG_IRAM)!=0);
bool desc_in_iram_flag=((vd->flags&VECDESC_FL_INIRAM)!=0);
//Bail out if int is shared, but iram property doesn't match what we want.
if ((vd->flags&VECDESC_FL_SHARED) && (desc_in_iram_flag!=in_iram_flag)) {
ALCHLOG("....Unusable: shared but iram prop doesn't match");
return false;
}
} else {
//We need an unshared IRQ; can't use shared ones; bail out if this is shared.
ALCHLOG("...Unusable: int is shared, we need non-shared.");
return false;
}
} else if (int_has_handler(x, cpu)) {
//Check if interrupt already is allocated by xt_set_interrupt_handler
ALCHLOG("....Unusable: already allocated");
return false;
}
return true;
}
//Locate a free interrupt compatible with the flags given.
//The 'force' argument can be -1, or 0-31 to force checking a certain interrupt.
//When a CPU is forced, the INTDESC_SPECIAL marked interrupts are also accepted.
static int get_available_int(int flags, int cpu, int force, int source)
{
int x;
int best=-1;
int bestLevel=9;
int bestSharedCt=INT_MAX;
//Default vector desc, for vectors not in the linked list
vector_desc_t empty_vect_desc;
memset(&empty_vect_desc, 0, sizeof(vector_desc_t));
//Level defaults to any low/med interrupt
if (!(flags&ESP_INTR_FLAG_LEVELMASK)) flags|=ESP_INTR_FLAG_LOWMED;
ALCHLOG("get_available_int: try to find existing. Cpu: %d, Source: %d", cpu, source);
vector_desc_t *vd = find_desc_for_source(source, cpu);
if ( vd ) {
// if existing vd found, don't need to search any more.
ALCHLOG("get_avalible_int: existing vd found. intno: %d", vd->intno);
if ( force != -1 && force != vd->intno ) {
ALCHLOG("get_avalible_int: intr forced but not matach existing. existing intno: %d, force: %d", vd->intno, force);
} else if ( !is_vect_desc_usable(vd, flags, cpu, force) ) {
ALCHLOG("get_avalible_int: existing vd invalid.");
} else {
best = vd->intno;
}
return best;
}
if (force!=-1) {
ALCHLOG("get_available_int: try to find force. Cpu: %d, Source: %d, Force: %d", cpu, source, force);
//if force assigned, don't need to search any more.
vd = find_desc_for_int(force, cpu);
if (vd == NULL ) {
//if existing vd not found, just check the default state for the intr.
empty_vect_desc.intno = force;
vd = &empty_vect_desc;
}
if ( is_vect_desc_usable(vd, flags, cpu, force) ) {
best = vd->intno;
} else {
ALCHLOG("get_avalible_int: forced vd invalid.");
}
return best;
}
ALCHLOG("get_free_int: start looking. Current cpu: %d", cpu);
//No allocated handlers as well as forced intr, iterate over the 32 possible interrupts
for (x=0; x<32; x++) {
//Grab the vector_desc for this vector.
vd=find_desc_for_int(x, cpu);
if (vd==NULL) {
empty_vect_desc.intno = x;
vd=&empty_vect_desc;
}
ALCHLOG("Int %d reserved %d level %d %s hasIsr %d",
x, int_desc[x].cpuflags[cpu]==INTDESC_RESVD, int_desc[x].level,
int_desc[x].type==INTTP_LEVEL?"LEVEL":"EDGE", int_has_handler(x, cpu));
if ( !is_vect_desc_usable(vd, flags, cpu, force) ) continue;
if (flags&ESP_INTR_FLAG_SHARED) {
//We're allocating a shared int.
//See if int already is used as a shared interrupt.
if (vd->flags&VECDESC_FL_SHARED) {
//We can use this already-marked-as-shared interrupt. Count the already attached isrs in order to see
//how useful it is.
int no=0;
shared_vector_desc_t *svdesc=vd->shared_vec_info;
while (svdesc!=NULL) {
no++;
svdesc=svdesc->next;
}
if (no<bestSharedCt || bestLevel>int_desc[x].level) {
//Seems like this shared vector is both okay and has the least amount of ISRs already attached to it.
best=x;
bestSharedCt=no;
bestLevel=int_desc[x].level;
ALCHLOG("...int %d more usable as a shared int: has %d existing vectors", x, no);
} else {
ALCHLOG("...worse than int %d", best);
}
} else {
if (best==-1) {
//We haven't found a feasible shared interrupt yet. This one is still free and usable, even if
//not marked as shared.
//Remember it in case we don't find any other shared interrupt that qualifies.
if (bestLevel>int_desc[x].level) {
best=x;
bestLevel=int_desc[x].level;
ALCHLOG("...int %d usable as a new shared int", x);
}
} else {
ALCHLOG("...already have a shared int");
}
}
} else {
//Seems this interrupt is feasible. Select it and break out of the loop; no need to search further.
if (bestLevel>int_desc[x].level) {
best=x;
bestLevel=int_desc[x].level;
} else {
ALCHLOG("...worse than int %d", best);
}
}
}
ALCHLOG("get_available_int: using int %d", best);
//Okay, by now we have looked at all potential interrupts and hopefully have selected the best one in best.
return best;
}
//Common shared isr handler. Chain-call all ISRs.
static void IRAM_ATTR shared_intr_isr(void *arg)
{
vector_desc_t *vd=(vector_desc_t*)arg;
shared_vector_desc_t *sh_vec=vd->shared_vec_info;
portENTER_CRITICAL_ISR(&spinlock);
while(sh_vec) {
if (!sh_vec->disabled) {
if ((sh_vec->statusreg == NULL) || (*sh_vec->statusreg & sh_vec->statusmask)) {
#if CONFIG_SYSVIEW_ENABLE
traceISR_ENTER(sh_vec->source+ETS_INTERNAL_INTR_SOURCE_OFF);
#endif
sh_vec->isr(sh_vec->arg);
#if CONFIG_SYSVIEW_ENABLE
// check if we will return to scheduler or to interrupted task after ISR
if (!port_switch_flag[xPortGetCoreID()]) {
traceISR_EXIT();
}
#endif
}
}
sh_vec=sh_vec->next;
}
portEXIT_CRITICAL_ISR(&spinlock);
}
#if CONFIG_SYSVIEW_ENABLE
//Common non-shared isr handler wrapper.
static void IRAM_ATTR non_shared_intr_isr(void *arg)
{
non_shared_isr_arg_t *ns_isr_arg=(non_shared_isr_arg_t*)arg;
portENTER_CRITICAL_ISR(&spinlock);
traceISR_ENTER(ns_isr_arg->source+ETS_INTERNAL_INTR_SOURCE_OFF);
// FIXME: can we call ISR and check port_switch_flag after releasing spinlock?
// when CONFIG_SYSVIEW_ENABLE = 0 ISRs for non-shared IRQs are called without spinlock
ns_isr_arg->isr(ns_isr_arg->isr_arg);
// check if we will return to scheduler or to interrupted task after ISR
if (!port_switch_flag[xPortGetCoreID()]) {
traceISR_EXIT();
}
portEXIT_CRITICAL_ISR(&spinlock);
}
#endif
//We use ESP_EARLY_LOG* here because this can be called before the scheduler is running.
esp_err_t esp_intr_alloc_intrstatus(int source, int flags, uint32_t intrstatusreg, uint32_t intrstatusmask, intr_handler_t handler,
void *arg, intr_handle_t *ret_handle)
{
intr_handle_data_t *ret=NULL;
int force=-1;
ESP_EARLY_LOGV(TAG, "esp_intr_alloc_intrstatus (cpu %d): checking args", xPortGetCoreID());
//Shared interrupts should be level-triggered.
if ((flags&ESP_INTR_FLAG_SHARED) && (flags&ESP_INTR_FLAG_EDGE)) return ESP_ERR_INVALID_ARG;
//You can't set an handler / arg for a non-C-callable interrupt.
if ((flags&ESP_INTR_FLAG_HIGH) && (handler)) return ESP_ERR_INVALID_ARG;
//Shared ints should have handler and non-processor-local source
if ((flags&ESP_INTR_FLAG_SHARED) && (!handler || source<0)) return ESP_ERR_INVALID_ARG;
//Statusreg should have a mask
if (intrstatusreg && !intrstatusmask) return ESP_ERR_INVALID_ARG;
//If the ISR is marked to be IRAM-resident, the handler must not be in the cached region
if ((flags&ESP_INTR_FLAG_IRAM) &&
(ptrdiff_t) handler >= 0x400C0000 &&
(ptrdiff_t) handler < 0x50000000 ) {
return ESP_ERR_INVALID_ARG;
}
//Default to prio 1 for shared interrupts. Default to prio 1, 2 or 3 for non-shared interrupts.
if ((flags&ESP_INTR_FLAG_LEVELMASK)==0) {
if (flags&ESP_INTR_FLAG_SHARED) {
flags|=ESP_INTR_FLAG_LEVEL1;
} else {
flags|=ESP_INTR_FLAG_LOWMED;
}
}
ESP_EARLY_LOGV(TAG, "esp_intr_alloc_intrstatus (cpu %d): Args okay. Resulting flags 0x%X", xPortGetCoreID(), flags);
//Check 'special' interrupt sources. These are tied to one specific interrupt, so we
//have to force get_free_int to only look at that.
if (source==ETS_INTERNAL_TIMER0_INTR_SOURCE) force=ETS_INTERNAL_TIMER0_INTR_NO;
if (source==ETS_INTERNAL_TIMER1_INTR_SOURCE) force=ETS_INTERNAL_TIMER1_INTR_NO;
if (source==ETS_INTERNAL_TIMER2_INTR_SOURCE) force=ETS_INTERNAL_TIMER2_INTR_NO;
if (source==ETS_INTERNAL_SW0_INTR_SOURCE) force=ETS_INTERNAL_SW0_INTR_NO;
if (source==ETS_INTERNAL_SW1_INTR_SOURCE) force=ETS_INTERNAL_SW1_INTR_NO;
if (source==ETS_INTERNAL_PROFILING_INTR_SOURCE) force=ETS_INTERNAL_PROFILING_INTR_NO;
//Allocate a return handle. If we end up not needing it, we'll free it later on.
ret=heap_caps_malloc(sizeof(intr_handle_data_t), MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT);
if (ret==NULL) return ESP_ERR_NO_MEM;
portENTER_CRITICAL(&spinlock);
int cpu=xPortGetCoreID();
//See if we can find an interrupt that matches the flags.
int intr=get_available_int(flags, cpu, force, source);
if (intr==-1) {
//None found. Bail out.
portEXIT_CRITICAL(&spinlock);
free(ret);
return ESP_ERR_NOT_FOUND;
}
//Get an int vector desc for int.
vector_desc_t *vd=get_desc_for_int(intr, cpu);
if (vd==NULL) {
portEXIT_CRITICAL(&spinlock);
free(ret);
return ESP_ERR_NO_MEM;
}
//Allocate that int!
if (flags&ESP_INTR_FLAG_SHARED) {
//Populate vector entry and add to linked list.
shared_vector_desc_t *sh_vec=malloc(sizeof(shared_vector_desc_t));
if (sh_vec==NULL) {
portEXIT_CRITICAL(&spinlock);
free(ret);
return ESP_ERR_NO_MEM;
}
memset(sh_vec, 0, sizeof(shared_vector_desc_t));
sh_vec->statusreg=(uint32_t*)intrstatusreg;
sh_vec->statusmask=intrstatusmask;
sh_vec->isr=handler;
sh_vec->arg=arg;
sh_vec->next=vd->shared_vec_info;
sh_vec->source=source;
sh_vec->disabled=0;
vd->shared_vec_info=sh_vec;
vd->flags|=VECDESC_FL_SHARED;
//(Re-)set shared isr handler to new value.
xt_set_interrupt_handler(intr, shared_intr_isr, vd);
} else {
//Mark as unusable for other interrupt sources. This is ours now!
vd->flags=VECDESC_FL_NONSHARED;
if (handler) {
#if CONFIG_SYSVIEW_ENABLE
non_shared_isr_arg_t *ns_isr_arg=malloc(sizeof(non_shared_isr_arg_t));
if (!ns_isr_arg) {
portEXIT_CRITICAL(&spinlock);
free(ret);
return ESP_ERR_NO_MEM;
}
ns_isr_arg->isr=handler;
ns_isr_arg->isr_arg=arg;
ns_isr_arg->source=source;
xt_set_interrupt_handler(intr, non_shared_intr_isr, ns_isr_arg);
#else
xt_set_interrupt_handler(intr, handler, arg);
#endif
}
if (flags&ESP_INTR_FLAG_EDGE) xthal_set_intclear(1 << intr);
vd->source=source;
}
if (flags&ESP_INTR_FLAG_IRAM) {
vd->flags|=VECDESC_FL_INIRAM;
non_iram_int_mask[cpu]&=~(1<<intr);
} else {
vd->flags&=~VECDESC_FL_INIRAM;
non_iram_int_mask[cpu]|=(1<<intr);
}
if (source>=0) {
intr_matrix_set(cpu, source, intr);
}
//Fill return handle data.
ret->vector_desc=vd;
ret->shared_vector_desc=vd->shared_vec_info;
//Enable int at CPU-level;
ESP_INTR_ENABLE(intr);
//If interrupt has to be started disabled, do that now; ints won't be enabled for real until the end
//of the critical section.
if (flags&ESP_INTR_FLAG_INTRDISABLED) {
esp_intr_disable(ret);
}
portEXIT_CRITICAL(&spinlock);
//Fill return handle if needed, otherwise free handle.
if (ret_handle!=NULL) {
*ret_handle=ret;
} else {
free(ret);
}
ESP_EARLY_LOGD(TAG, "Connected src %d to int %d (cpu %d)", source, intr, cpu);
return ESP_OK;
}
esp_err_t esp_intr_alloc(int source, int flags, intr_handler_t handler, void *arg, intr_handle_t *ret_handle)
{
/*
As an optimization, we can create a table with the possible interrupt status registers and masks for every single
source there is. We can then add code here to look up an applicable value and pass that to the
esp_intr_alloc_intrstatus function.
*/
return esp_intr_alloc_intrstatus(source, flags, 0, 0, handler, arg, ret_handle);
}
esp_err_t IRAM_ATTR esp_intr_set_in_iram(intr_handle_t handle, bool is_in_iram)
{
if (!handle) return ESP_ERR_INVALID_ARG;
vector_desc_t *vd = handle->vector_desc;
if (vd->flags & VECDESC_FL_SHARED) {
return ESP_ERR_INVALID_ARG;
}
portENTER_CRITICAL(&spinlock);
uint32_t mask = (1 << vd->intno);
if (is_in_iram) {
vd->flags |= VECDESC_FL_INIRAM;
non_iram_int_mask[vd->cpu] &= ~mask;
} else {
vd->flags &= ~VECDESC_FL_INIRAM;
non_iram_int_mask[vd->cpu] |= mask;
}
portEXIT_CRITICAL(&spinlock);
return ESP_OK;
}
#if !CONFIG_FREERTOS_UNICORE
static void esp_intr_free_cb(void *arg)
{
(void)esp_intr_free((intr_handle_t)arg);
}
#endif /* !CONFIG_FREERTOS_UNICORE */
esp_err_t esp_intr_free(intr_handle_t handle)
{
bool free_shared_vector=false;
if (!handle) return ESP_ERR_INVALID_ARG;
#if !CONFIG_FREERTOS_UNICORE
//Assign this routine to the core where this interrupt is allocated on.
if (handle->vector_desc->cpu!=xPortGetCoreID()) {
esp_err_t ret = esp_ipc_call_blocking(handle->vector_desc->cpu, &esp_intr_free_cb, (void *)handle);
return ret == ESP_OK ? ESP_OK : ESP_FAIL;
}
#endif /* !CONFIG_FREERTOS_UNICORE */
portENTER_CRITICAL(&spinlock);
esp_intr_disable(handle);
if (handle->vector_desc->flags&VECDESC_FL_SHARED) {
//Find and kill the shared int
shared_vector_desc_t *svd=handle->vector_desc->shared_vec_info;
shared_vector_desc_t *prevsvd=NULL;
assert(svd); //should be something in there for a shared int
while (svd!=NULL) {
if (svd==handle->shared_vector_desc) {
//Found it. Now kill it.
if (prevsvd) {
prevsvd->next=svd->next;
} else {
handle->vector_desc->shared_vec_info=svd->next;
}
free(svd);
break;
}
prevsvd=svd;
svd=svd->next;
}
//If nothing left, disable interrupt.
if (handle->vector_desc->shared_vec_info==NULL) free_shared_vector=true;
ESP_EARLY_LOGV(TAG, "esp_intr_free: Deleting shared int: %s. Shared int is %s", svd?"not found or last one":"deleted", free_shared_vector?"empty now.":"still in use");
}
if ((handle->vector_desc->flags&VECDESC_FL_NONSHARED) || free_shared_vector) {
ESP_EARLY_LOGV(TAG, "esp_intr_free: Disabling int, killing handler");
#if CONFIG_SYSVIEW_ENABLE
if (!free_shared_vector) {
void *isr_arg = xt_get_interrupt_handler_arg(handle->vector_desc->intno);
if (isr_arg) {
free(isr_arg);
}
}
#endif
//Reset to normal handler
xt_set_interrupt_handler(handle->vector_desc->intno, xt_unhandled_interrupt, (void*)((int)handle->vector_desc->intno));
//Theoretically, we could free the vector_desc... not sure if that's worth the few bytes of memory
//we save.(We can also not use the same exit path for empty shared ints anymore if we delete
//the desc.) For now, just mark it as free.
handle->vector_desc->flags&=!(VECDESC_FL_NONSHARED|VECDESC_FL_RESERVED);
//Also kill non_iram mask bit.
non_iram_int_mask[handle->vector_desc->cpu]&=~(1<<(handle->vector_desc->intno));
}
portEXIT_CRITICAL(&spinlock);
free(handle);
return ESP_OK;
}
int esp_intr_get_intno(intr_handle_t handle)
{
return handle->vector_desc->intno;
}
int esp_intr_get_cpu(intr_handle_t handle)
{
return handle->vector_desc->cpu;
}
/*
Interrupt disabling strategy:
If the source is >=0 (meaning a muxed interrupt), we disable it by muxing the interrupt to a non-connected
interrupt. If the source is <0 (meaning an internal, per-cpu interrupt), we disable it using ESP_INTR_DISABLE.
This allows us to, for the muxed CPUs, disable an int from the other core. It also allows disabling shared
interrupts.
*/
//Muxing an interrupt source to interrupt 6, 7, 11, 15, 16 or 29 cause the interrupt to effectively be disabled.
#define INT_MUX_DISABLED_INTNO 6
esp_err_t IRAM_ATTR esp_intr_enable(intr_handle_t handle)
{
if (!handle) return ESP_ERR_INVALID_ARG;
portENTER_CRITICAL_SAFE(&spinlock);
int source;
if (handle->shared_vector_desc) {
handle->shared_vector_desc->disabled=0;
source=handle->shared_vector_desc->source;
} else {
source=handle->vector_desc->source;
}
if (source >= 0) {
//Disabled using int matrix; re-connect to enable
intr_matrix_set(handle->vector_desc->cpu, source, handle->vector_desc->intno);
} else {
//Re-enable using cpu int ena reg
if (handle->vector_desc->cpu!=xPortGetCoreID()) return ESP_ERR_INVALID_ARG; //Can only enable these ints on this cpu
ESP_INTR_ENABLE(handle->vector_desc->intno);
}
portEXIT_CRITICAL_SAFE(&spinlock);
return ESP_OK;
}
esp_err_t IRAM_ATTR esp_intr_disable(intr_handle_t handle)
{
if (!handle) return ESP_ERR_INVALID_ARG;
portENTER_CRITICAL_SAFE(&spinlock);
int source;
bool disabled = 1;
if (handle->shared_vector_desc) {
handle->shared_vector_desc->disabled=1;
source=handle->shared_vector_desc->source;
shared_vector_desc_t *svd=handle->vector_desc->shared_vec_info;
assert( svd != NULL );
while( svd ) {
if ( svd->source == source && svd->disabled == 0 ) {
disabled = 0;
break;
}
svd = svd->next;
}
} else {
source=handle->vector_desc->source;
}
if (source >= 0) {
if ( disabled ) {
//Disable using int matrix
intr_matrix_set(handle->vector_desc->cpu, source, INT_MUX_DISABLED_INTNO);
}
} else {
//Disable using per-cpu regs
if (handle->vector_desc->cpu!=xPortGetCoreID()) {
portEXIT_CRITICAL(&spinlock);
return ESP_ERR_INVALID_ARG; //Can only enable these ints on this cpu
}
ESP_INTR_DISABLE(handle->vector_desc->intno);
}
portEXIT_CRITICAL_SAFE(&spinlock);
return ESP_OK;
}
void IRAM_ATTR esp_intr_noniram_disable()
{
int oldint;
int cpu=xPortGetCoreID();
int intmask=~non_iram_int_mask[cpu];
if (non_iram_int_disabled_flag[cpu]) abort();
non_iram_int_disabled_flag[cpu]=true;
asm volatile (
"movi %0,0\n"
"xsr %0,INTENABLE\n" //disable all ints first
"rsync\n"
"and a3,%0,%1\n" //mask ints that need disabling
"wsr a3,INTENABLE\n" //write back
"rsync\n"
:"=&r"(oldint):"r"(intmask):"a3");
//Save which ints we did disable
non_iram_int_disabled[cpu]=oldint&non_iram_int_mask[cpu];
}
void IRAM_ATTR esp_intr_noniram_enable()
{
int cpu=xPortGetCoreID();
int intmask=non_iram_int_disabled[cpu];
if (!non_iram_int_disabled_flag[cpu]) abort();
non_iram_int_disabled_flag[cpu]=false;
asm volatile (
"movi a3,0\n"
"xsr a3,INTENABLE\n"
"rsync\n"
"or a3,a3,%0\n"
"wsr a3,INTENABLE\n"
"rsync\n"
::"r"(intmask):"a3");
}
//These functions are provided in ROM, but the ROM-based functions use non-multicore-capable
//virtualized interrupt levels. Thus, we disable them in the ld file and provide working
//equivalents here.
void IRAM_ATTR ets_isr_unmask(unsigned int mask) {
xt_ints_on(mask);
}
void IRAM_ATTR ets_isr_mask(unsigned int mask) {
xt_ints_off(mask);
}