esp-idf/components/usb/private_include/usbh.h
2024-05-07 15:07:51 +02:00

565 lines
19 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include <sys/queue.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "hcd.h"
#include "usb/usb_types_ch9.h"
#include "usb/usb_types_stack.h"
#ifdef __cplusplus
extern "C" {
#endif
// ------------------------------------------------------ Types --------------------------------------------------------
// ----------------------- Handles -------------------------
/**
* @brief Handle of a allocated endpoint
*/
typedef struct usbh_ep_handle_s *usbh_ep_handle_t;
// ----------------------- Events --------------------------
/**
* @brief Enumerator for various USBH events
*/
typedef enum {
USBH_EVENT_CTRL_XFER, /**< A control transfer has completed */
USBH_EVENT_NEW_DEV, /**< A new device has been enumerated and added to the device pool */
USBH_EVENT_DEV_GONE, /**< A device is gone. Clients should close the device */
USBH_EVENT_DEV_FREE, /**< A device has been freed. Its upstream port can now be recycled */
USBH_EVENT_ALL_FREE, /**< All devices have been freed */
} usbh_event_t;
/**
* @brief Event data object for USBH events
*/
typedef struct {
usbh_event_t event;
union {
struct {
usb_device_handle_t dev_hdl;
urb_t *urb;
} ctrl_xfer_data;
struct {
uint8_t dev_addr;
} new_dev_data;
struct {
uint8_t dev_addr;
usb_device_handle_t dev_hdl;
} dev_gone_data;
struct {
unsigned int dev_uid;
usb_device_handle_t parent_dev_hdl;
uint8_t port_num;
} dev_free_data;
};
} usbh_event_data_t;
/**
* @brief Endpoint events
*
* @note Optimization: Keep this identical to hcd_pipe_event_t
*/
typedef enum {
USBH_EP_EVENT_NONE, /**< The EP has no events (used to indicate no events when polling) */
USBH_EP_EVENT_URB_DONE, /**< The EP has completed a URB. The URB can be dequeued */
USBH_EP_EVENT_ERROR_XFER, /**< The EP encountered excessive errors when transferring a URB i.e., three three consecutive transaction errors (e.g., no ACK, bad CRC etc) */
USBH_EP_EVENT_ERROR_URB_NOT_AVAIL, /**< The EP tried to execute a transfer but no URB was available */
USBH_EP_EVENT_ERROR_OVERFLOW, /**< The EP received more data than requested. Usually a Packet babble error (i.e., an IN packet has exceeded the EP's MPS) */
USBH_EP_EVENT_ERROR_STALL, /**< EP received a STALL response */
} usbh_ep_event_t;
// ------------------ Requests/Commands --------------------
/**
* @brief Endpoint commands
*
* @note Optimization: Keep this identical to hcd_pipe_cmd_t
*/
typedef enum {
USBH_EP_CMD_HALT, /**< Halt an active endpoint. Any currently executing URB will be canceled. Enqueued URBs are left untouched */
USBH_EP_CMD_FLUSH, /**< Can only be called when halted. Will cause all enqueued URBs to be canceled */
USBH_EP_CMD_CLEAR, /**< Causes a halted endpoint to become active again. Any enqueued URBs will being executing.*/
} usbh_ep_cmd_t;
// ---------------------- Callbacks ------------------------
/**
* @brief Callback used to indicate that the USBH has an event
*
* @note This callback is called from within usbh_process()
*/
typedef void (*usbh_event_cb_t)(usbh_event_data_t *event_data, void *arg);
/**
* @brief Callback used to indicate an event on an endpoint
*
* Return whether to yield or not if called from an ISR. Always return false if not called from an ISR
*/
typedef bool (*usbh_ep_cb_t)(usbh_ep_handle_t ep_hdl, usbh_ep_event_t ep_event, void *arg, bool in_isr);
// ----------------------- Objects -------------------------
/**
* @brief Configuration for an endpoint being allocated using usbh_ep_alloc()
*/
typedef struct {
uint8_t bInterfaceNumber; /**< Interface number */
uint8_t bAlternateSetting; /**< Alternate setting number of the interface */
uint8_t bEndpointAddress; /**< Endpoint address */
usbh_ep_cb_t ep_cb; /**< Endpoint event callback */
void *ep_cb_arg; /**< Endpoint callback argument */
void *context; /**< Endpoint context */
} usbh_ep_config_t;
/**
* @brief USBH configuration used in usbh_install()
*/
typedef struct {
usb_proc_req_cb_t proc_req_cb; /**< Processing request callback */
void *proc_req_cb_arg; /**< Processing request callback argument */
usbh_event_cb_t event_cb; /**< USBH event callback */
void *event_cb_arg; /**< USBH event callback argument */
} usbh_config_t;
/**
* @brief USBH device parameters used in usbh_devs_add()
*/
typedef struct {
unsigned int uid; /**< Unique ID assigned to the device */
usb_speed_t speed; /**< Device's speed */
hcd_port_handle_t root_port_hdl; /**< Handle of the port that the device is connected to */
usb_device_handle_t parent_dev_hdl; /**< Parent's device handle */
uint8_t parent_port_num; /**< Parent's port number */
} usbh_dev_params_t;
// ---------------------- USBH Processing Functions ----------------------------
/**
* @brief Installs the USBH driver
*
* - This function will internally install the HCD
* - This must be called before calling any Hub driver functions
*
* @note Before calling this function, the Host Controller must already be un-clock gated and reset. The USB PHY
* (internal or external, and associated GPIOs) must already be configured.
* @param usbh_config USBH driver configuration
* @return esp_err_t
*/
esp_err_t usbh_install(const usbh_config_t *usbh_config);
/**
* @brief Uninstall the USBH driver
*
* - This function will uninstall the HCD
* - The Hub driver must be uninstalled before calling this function
*
* @note This function will simply free the resources used by the USBH. The underlying Host Controller and USB PHY will
* not be disabled.
* @return esp_err_t
*/
esp_err_t usbh_uninstall(void);
/**
* @brief USBH processing function
*
* - USBH processing function that must be called repeatedly to process USBH events
* - If blocking, the caller can block until the proc_req_cb() is called with USB_PROC_REQ_SOURCE_USBH as the request
* source. The USB_PROC_REQ_SOURCE_USBH source indicates that this function should be called.
*
* @note This function can block
* @return esp_err_t
*/
esp_err_t usbh_process(void);
// ---------------------- Device Pool Functions --------------------------------
/**
* @brief Get the current number of devices
*
* @note This function can block
* @param[out] num_devs_ret Current number of devices
* @return esp_err_t
*/
esp_err_t usbh_devs_num(int *num_devs_ret);
/**
* @brief Fill list with address of currently connected devices
*
* - This function fills the provided list with the address of current connected devices
* - Device address can then be used in usbh_devs_open()
* - If there are more devices than the list_len, this function will only fill
* up to list_len number of devices.
*
* @param[in] list_len Length of empty list
* @param[inout] dev_addr_list Empty list to be filled
* @param[out] num_dev_ret Number of devices filled into list
* @return esp_err_t
*/
esp_err_t usbh_devs_addr_list_fill(int list_len, uint8_t *dev_addr_list, int *num_dev_ret);
/**
* @brief Create a device and add it to the device pool
*
* The created device will not be enumerated where the device's address is 0,
* device and config descriptor are NULL. The device will still have a default
* pipe, thus allowing control transfers to be submitted.
*
* - Call usbh_devs_open() before communicating with the device
* - Call usbh_dev_enum_lock() before enumerating the device via the various
* usbh_dev_set_...() functions.
*
* @param[in] params Device parameters, using for device creation
* @return esp_err_t
*/
esp_err_t usbh_devs_add(usbh_dev_params_t *params);
/**
* @brief Indicates to the USBH that a device is gone
*
* @param[in] uid Unique ID assigned to the device on creation (see 'usbh_devs_add()')
* @return esp_err_t
*/
esp_err_t usbh_devs_remove(unsigned int uid);
/**
* @brief Get a device's connection information
*
* @note Can be called without opening the device
*
* @param[in] uid Unique ID assigned to the device
* @param[out] parent_info Parent device handle
* @param[out] port_num Parent port number
* @return esp_err_t
*/
esp_err_t usbh_devs_get_parent_info(unsigned int uid, usb_parent_dev_info_t *parent_info);
/**
* @brief Mark that all devices should be freed at the next possible opportunity
*
* A device marked as free will not be freed until the last client using the device has called usbh_devs_close()
*
* @return
* - ESP_OK: There were no devices to free to begin with. Current state is all free
* - ESP_ERR_NOT_FINISHED: One or more devices still need to be freed (but have been marked "to be freed")
*/
esp_err_t usbh_devs_mark_all_free(void);
/**
* @brief Open a device by address
*
* A device must be opened before it can be used
*
* @param[in] dev_addr Device address
* @param[out] dev_hdl Device handle
* @return esp_err_t
*/
esp_err_t usbh_devs_open(uint8_t dev_addr, usb_device_handle_t *dev_hdl);
/**
* @brief Trigger a USBH_EVENT_NEW_DEV event for the device
*
* This is typically called after a device has been fully enumerated.
*
* @param[in] dev_hdl Device handle
* @return esp_err_t
*/
esp_err_t usbh_devs_new_dev_event(usb_device_handle_t dev_hdl);
// ------------------------ Device Functions -----------------------------------
/**
* @brief Close a device
*
* @note Callers of this function must have opened the device via usbh_devs_open()
* *
* @param[in] dev_hdl Device handle
* @return esp_err_t
*/
esp_err_t usbh_dev_close(usb_device_handle_t dev_hdl);
// ------------------------------ Getters --------------------------------------
/**
* @brief Get a device's address
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* @param[in] dev_hdl Device handle
* @param[out] dev_addr Device's address
* @return esp_err_t
*/
esp_err_t usbh_dev_get_addr(usb_device_handle_t dev_hdl, uint8_t *dev_addr);
/**
* @brief Get a device's information
*
* @note Callers of this function must have opened the device via usbh_devs_open()
* @note It is possible that the device has not been enumerated yet, thus some
* fields may be NULL.
*
* @param[in] dev_hdl Device handle
* @param[out] dev_info Device information
* @return esp_err_t
*/
esp_err_t usbh_dev_get_info(usb_device_handle_t dev_hdl, usb_device_info_t *dev_info);
/**
* @brief Get a device's device descriptor
*
* The device descriptor is cached when the device is created by the Hub driver
*
* @note It is possible that the device has not been enumerated yet, thus the
* device descriptor could be NULL.
* @param[in] dev_hdl Device handle
* @param[out] dev_desc_ret Device descriptor
* @return esp_err_t
*/
esp_err_t usbh_dev_get_desc(usb_device_handle_t dev_hdl, const usb_device_desc_t **dev_desc_ret);
/**
* @brief Get a device's active configuration descriptor
*
* @note Callers of this function must have opened the device via usbh_devs_open()
* Simply returns a reference to the internally cached configuration descriptor
*
* @note It is possible that the device has not been enumerated yet, thus the
* configuration descriptor could be NULL.
* @param[in] dev_hdl Device handle
* @param config_desc_ret
* @return esp_err_t
*/
esp_err_t usbh_dev_get_config_desc(usb_device_handle_t dev_hdl, const usb_config_desc_t **config_desc_ret);
// ------------------------------- Setters -------------------------------------
/**
* @brief Lock a device for enumeration
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* - A device's enumeration lock must be set before any of its enumeration fields
* (e.g., address, device/config descriptors) can be set/updated.
* - The caller must be the sole opener of the device (see 'usbh_devs_open()')
* when locking the device for enumeration.
*
* @param[in] dev_hdl Device handle
* @return esp_err_t
*/
esp_err_t usbh_dev_enum_lock(usb_device_handle_t dev_hdl);
/**
* @brief Release a device's enumeration lock
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* @param[in] dev_hdl Device handle
* @return esp_err_t
*/
esp_err_t usbh_dev_enum_unlock(usb_device_handle_t dev_hdl);
/**
* @brief Set the maximum packet size of EP0 for a device
*
* Typically called during enumeration after obtaining the first 8 bytes of the
* device's descriptor.
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* @note The device's enumeration lock must be set before calling this function
* (see 'usbh_dev_enum_lock()')
*
* @param[in] dev_hdl Device handle
* @param[in] wMaxPacketSize Maximum packet size
* @return esp_err_t
*/
esp_err_t usbh_dev_set_ep0_mps(usb_device_handle_t dev_hdl, uint16_t wMaxPacketSize);
/**
* @brief Set a device's address
*
* Typically called during enumeration after a SET_ADDRESS request has been
* sent to the device.
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* @note The device's enumeration lock must be set before calling this function
* (see 'usbh_dev_enum_lock()')
* @param[in] dev_hdl Device handle
* @param[in] dev_addr Device address to set
* @return esp_err_t
*/
esp_err_t usbh_dev_set_addr(usb_device_handle_t dev_hdl, uint8_t dev_addr);
/**
* @brief Set a device's descriptor
*
* Typically called during enumeration after obtaining the device's descriptor
* via a GET_DESCRIPTOR request.
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* @note The device's enumeration lock must be set before calling this function
* (see 'usbh_dev_enum_lock()')
*
* @param[in] dev_hdl Device handle
* @param[in] device_desc Device descriptor to copy
* @return esp_err_t
*/
esp_err_t usbh_dev_set_desc(usb_device_handle_t dev_hdl, const usb_device_desc_t *device_desc);
/**
* @brief Set a device's configuration descriptor
*
* Typically called during enumeration after obtaining the device's configuration
* descriptor via a GET_DESCRIPTOR request.
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* @note The device's enumeration lock must be set before calling this function
* (see 'usbh_dev_enum_lock()')
*
* @param[in] dev_hdl Device handle
* @param[in] config_desc_full Configuration descriptor to copy
* @return esp_err_t
*/
esp_err_t usbh_dev_set_config_desc(usb_device_handle_t dev_hdl, const usb_config_desc_t *config_desc_full);
/**
* @brief Set a device's string descriptor
*
* Typically called during enumeration after obtaining one of the device's string
* descriptor via a GET_DESCRIPTOR request.
*
* @note Callers of this function must have opened the device via usbh_devs_open()
*
* @note The device's enumeration lock must be set before calling this function
* (see 'usbh_dev_enum_lock()')
*
* @param[in] dev_hdl Device handle
* @param[in] str_desc String descriptor to copy
* @param[in] select Select string descriptor. 0/1/2 for Manufacturer/Product/Serial
* Number string descriptors respectively
* @return esp_err_t
*/
esp_err_t usbh_dev_set_str_desc(usb_device_handle_t dev_hdl, const usb_str_desc_t *str_desc, int select);
// ----------------------- Endpoint Functions ----------------------------------
/**
* @brief Allocate an endpoint on a device
*
* This function allows clients to allocate a non-default endpoint (i.e., not EP0) on a connected device
*
* - A client must have opened the device using usbh_devs_open() before attempting to allocate an endpoint on the device
* - A client should call this function to allocate all endpoints in an interface that the client has claimed.
* - A client must allocate an endpoint using this function before attempting to communicate with it
* - Once the client allocates an endpoint, the client is now owns/manages the endpoint. No other client should use or
* deallocate the endpoint.
*
* @note This function can block
* @note Default endpoints (EP0) are owned by the USBH. For control transfers, use usbh_dev_submit_ctrl_urb() instead
*
* @param[in] dev_hdl Device handle
* @param[in] ep_config Endpoint configuration
* @param[out] ep_hdl_ret Endpoint handle
* @return esp_err_t
*/
esp_err_t usbh_ep_alloc(usb_device_handle_t dev_hdl, usbh_ep_config_t *ep_config, usbh_ep_handle_t *ep_hdl_ret);
/**
* @brief Free and endpoint on a device
*
* This function frees an endpoint previously allocated by the client using usbh_ep_alloc()
*
* - Only the client that allocated the endpoint should free it
* - The client must have halted and flushed the endpoint using usbh_ep_command() before attempting to free it
* - The client must ensure that there are no more function calls to the endpoint before freeing it
*
* @note This function can block
* @param[in] ep_hdl Endpoint handle
* @return esp_err_t
*/
esp_err_t usbh_ep_free(usbh_ep_handle_t ep_hdl);
/**
* @brief Get the handle of an endpoint using its address
*
* The endpoint must have been previously allocated using usbh_ep_alloc()
*
* @param[in] dev_hdl Device handle
* @param[in] bEndpointAddress Endpoint address
* @param[out] ep_hdl_ret Endpoint handle
* @return esp_err_t
*/
esp_err_t usbh_ep_get_handle(usb_device_handle_t dev_hdl, uint8_t bEndpointAddress, usbh_ep_handle_t *ep_hdl_ret);
/**
* @brief Execute a command on a particular endpoint
*
* Endpoint commands allows executing a certain action on an endpoint (e.g., halting, flushing, clearing etc)
*
* @param[in] ep_hdl Endpoint handle
* @param[in] command Endpoint command
* @return esp_err_t
*/
esp_err_t usbh_ep_command(usbh_ep_handle_t ep_hdl, usbh_ep_cmd_t command);
/**
* @brief Get the context of an endpoint
*
* Get the context variable assigned to and endpoint on allocation.
*
* @note This function can block
* @param[in] ep_hdl Endpoint handle
* @return Endpoint context
*/
void *usbh_ep_get_context(usbh_ep_handle_t ep_hdl);
// ------------------------- Transfer Functions --------------------------------
/**
* @brief Submit a control transfer (URB) to a device
*
* @param[in] dev_hdl Device handle
* @param[in] urb URB
* @return esp_err_t
*/
esp_err_t usbh_dev_submit_ctrl_urb(usb_device_handle_t dev_hdl, urb_t *urb);
/**
* @brief Enqueue a URB to an endpoint
*
* The URB will remain enqueued until it completes (successfully or errors out). Use usbh_ep_dequeue_urb() to dequeue
* a completed URB.
*
* @param[in] ep_hdl Endpoint handle
* @param[in] urb URB to enqueue
* @return esp_err_t
*/
esp_err_t usbh_ep_enqueue_urb(usbh_ep_handle_t ep_hdl, urb_t *urb);
/**
* @brief Dequeue a URB from an endpoint
*
* Dequeue a completed URB from an endpoint. The USBH_EP_EVENT_URB_DONE indicates that URBs can be dequeued
*
* @param[in] ep_hdl Endpoint handle
* @param[out] urb_ret Dequeued URB, or NULL if no more URBs to dequeue
* @return esp_err_t
*/
esp_err_t usbh_ep_dequeue_urb(usbh_ep_handle_t ep_hdl, urb_t **urb_ret);
#ifdef __cplusplus
}
#endif