esp-idf/components/freemodbus/modbus/include/mbport.h
Alex Lisitsyn cfdd5f0ef7 freemodbus: configure timer handler placement
place timer interrupt handler into flash by default;
add default settings for timer and UART interrupts to place them into IRAM into example defaults;
CONFIG_FMB_TIMER_PORT_ENABLED default = n, when enabled, the UART_ISR_IN_IRAM set to y
2019-11-12 22:16:55 +08:00

229 lines
8.5 KiB
C

/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbport.h,v 1.19 2010/06/06 13:54:40 wolti Exp $
*/
#ifndef _MB_PORT_H
#define _MB_PORT_H
#include "mbconfig.h" // for options
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
#if CONFIG_UART_ISR_IN_IRAM
#define MB_PORT_SERIAL_ISR_FLAG ESP_INTR_FLAG_IRAM
#else
#define MB_PORT_SERIAL_ISR_FLAG ESP_INTR_FLAG_LOWMED
#endif
#if MB_PORT_TIMER_ISR_IN_IRAM
#define MB_PORT_ISR_ATTR IRAM_ATTR
#define MB_PORT_TIMER_ISR_FLAG ESP_INTR_FLAG_IRAM
#else
#define MB_PORT_ISR_ATTR
#define MB_PORT_TIMER_ISR_FLAG ESP_INTR_FLAG_LOWMED
#endif
/* ----------------------- Type definitions ---------------------------------*/
typedef enum
{
EV_READY = 0x01, /*!< Startup finished. */
EV_FRAME_RECEIVED = 0x02, /*!< Frame received. */
EV_EXECUTE = 0x04, /*!< Execute function. */
EV_FRAME_SENT = 0x08 /*!< Frame sent. */
} eMBEventType;
#if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED
typedef enum {
EV_MASTER_NO_EVENT = 0x0000,
EV_MASTER_READY = 0x0001, /*!< Startup finished. */
EV_MASTER_FRAME_RECEIVED = 0x0002, /*!< Frame received. */
EV_MASTER_EXECUTE = 0x0004, /*!< Execute function. */
EV_MASTER_FRAME_SENT = 0x0008, /*!< Frame sent. */
EV_MASTER_FRAME_TRANSMITTED = 0x0010, /*!< Request execute function error. */
EV_MASTER_ERROR_PROCESS = 0x0020, /*!< Frame error process. */
EV_MASTER_PROCESS_SUCCESS = 0x0040, /*!< Request process success. */
EV_MASTER_ERROR_RESPOND_TIMEOUT = 0x0080, /*!< Request respond timeout. */
EV_MASTER_ERROR_RECEIVE_DATA = 0x0100, /*!< Request receive data error. */
EV_MASTER_ERROR_EXECUTE_FUNCTION = 0x0200, /*!< Request execute function error. */
} eMBMasterEventType;
typedef enum {
EV_ERROR_RESPOND_TIMEOUT, /*!< Slave respond timeout. */
EV_ERROR_RECEIVE_DATA, /*!< Receive frame data erroe. */
EV_ERROR_EXECUTE_FUNCTION, /*!< Execute function error. */
} eMBMasterErrorEventType;
#endif
/*! \ingroup modbus
* \brief Parity used for characters in serial mode.
*
* The parity which should be applied to the characters sent over the serial
* link. Please note that this values are actually passed to the porting
* layer and therefore not all parity modes might be available.
*/
typedef enum
{
MB_PAR_NONE, /*!< No parity. */
MB_PAR_ODD, /*!< Odd parity. */
MB_PAR_EVEN /*!< Even parity. */
} eMBParity;
/* ----------------------- Supporting functions -----------------------------*/
BOOL xMBPortEventInit( void );
BOOL xMBPortEventPost( eMBEventType eEvent );
BOOL xMBPortEventGet( /*@out@ */ eMBEventType * eEvent );
#if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED
BOOL xMBMasterPortEventInit( void );
BOOL xMBMasterPortEventPost( eMBMasterEventType eEvent );
BOOL xMBMasterPortEventGet( /*@out@ */ eMBMasterEventType * eEvent );
void vMBMasterOsResInit( void );
BOOL xMBMasterRunResTake( LONG time );
void vMBMasterRunResRelease( void );
#endif // #if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED
/* ----------------------- Serial port functions ----------------------------*/
BOOL xMBPortSerialInit( UCHAR ucPort, ULONG ulBaudRate,
UCHAR ucDataBits, eMBParity eParity );
void vMBPortClose( void );
void xMBPortSerialClose( void );
void vMBPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable );
BOOL xMBPortSerialGetByte( CHAR * pucByte );
BOOL xMBPortSerialPutByte( CHAR ucByte );
#if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED
BOOL xMBMasterPortSerialInit( UCHAR ucPort, ULONG ulBaudRate,
UCHAR ucDataBits, eMBParity eParity );
void vMBMasterPortClose( void );
void xMBMasterPortSerialClose( void );
void vMBMasterPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable );
BOOL xMBMasterPortSerialGetByte( CHAR * pucByte );
BOOL xMBMasterPortSerialPutByte( CHAR ucByte );
#endif
/* ----------------------- Timers functions ---------------------------------*/
BOOL xMBPortTimersInit( USHORT usTimeOut50us );
void xMBPortTimersClose( void );
void vMBPortTimersEnable( void );
void vMBPortTimersDisable( void );
void vMBPortTimersDelay( USHORT usTimeOutMS );
#if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED
BOOL xMBMasterPortTimersInit( USHORT usTimeOut50us );
void xMBMasterPortTimersClose( void );
void vMBMasterPortTimersT35Enable( void );
void vMBMasterPortTimersConvertDelayEnable( void );
void vMBMasterPortTimersRespondTimeoutEnable( void );
void vMBMasterPortTimersDisable( void );
#endif
/* ----------------- Callback for the master error process ------------------*/
void vMBMasterErrorCBRespondTimeout( UCHAR ucDestAddress, const UCHAR* pucPDUData,
USHORT ucPDULength );
void vMBMasterErrorCBReceiveData( UCHAR ucDestAddress, const UCHAR* pucPDUData,
USHORT ucPDULength );
void vMBMasterErrorCBExecuteFunction( UCHAR ucDestAddress, const UCHAR* pucPDUData,
USHORT ucPDULength );
void vMBMasterCBRequestSuccess( void );
/* ----------------------- Callback for the protocol stack ------------------*/
/*!
* \brief Callback function for the porting layer when a new byte is
* available.
*
* Depending upon the mode this callback function is used by the RTU or
* ASCII transmission layers. In any case a call to xMBPortSerialGetByte()
* must immediately return a new character.
*
* \return <code>TRUE</code> if a event was posted to the queue because
* a new byte was received. The port implementation should wake up the
* tasks which are currently blocked on the eventqueue.
*/
extern BOOL( *pxMBFrameCBByteReceived ) ( void );
extern BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
extern BOOL( *pxMBPortCBTimerExpired ) ( void );
#if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED
extern BOOL( *pxMBMasterFrameCBByteReceived ) ( void );
extern BOOL( *pxMBMasterFrameCBTransmitterEmpty ) ( void );
extern BOOL( *pxMBMasterPortCBTimerExpired ) ( void );
#endif
/* ----------------------- TCP port functions -------------------------------*/
#if MB_TCP_ENABLED
BOOL xMBTCPPortInit( USHORT usTCPPort );
void vMBTCPPortClose( void );
void vMBTCPPortDisable( void );
BOOL xMBTCPPortGetRequest( UCHAR **ppucMBTCPFrame, USHORT * usTCPLength );
BOOL xMBTCPPortSendResponse( const UCHAR *pucMBTCPFrame, USHORT usTCPLength );
#endif
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif