mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
9582cbe5b8
1. The 2nd bootloader always call `rom_spiflash_unlock()`, but never help to clear the WEL bit when exit. This may cause system unstability. This commit helps to clear WEL when flash configuration is done. **RISK:** When the app starts, it didn't have to clear the WEL before it actually write/erase. But now the very first write/erase operation should be done after a WEL clear. Though the risk is little (all the following write/erase also need to clear the WEL), we still have to test this carefully, especially for those functions used by the OTA. 2. The `rom_spiflash_unlock()` function in the patch of ESP32 may (1) trigger the QPI, (2) clear the QE or (3) fail to unlock the ISSI chips. Status register bitmap of ISSI chip and GD chip: | SR | ISSI | GD25LQ32C | | -- | ---- | --------- | | 0 | WIP | WIP | | 1 | WEL | WEL | | 2 | BP0 | BP0 | | 3 | BP1 | BP1 | | 4 | BP2 | BP2 | | 5 | BP3 | BP3 | | 6 | QE | BP4 | | 7 | SRWD | SRP0 | | 8 | | SRP1 | | 9 | | QE | | 10 | | SUS2 | | 11 | | LB1 | | 12 | | LB2 | | 13 | | LB3 | | 14 | | CMP | | 15 | | SUS1 | QE bit of other chips are at the bit 9 of the status register (i.e. bit 1 of SR2), which should be read by RDSR2 command. However, the RDSR2 (35H, Read Status 2) command for chip of other vendors happens to be the QIOEN (Enter QPI mode) command of ISSI chips. When the `rom_spiflash_unlock()` function trys to read SR2, it may trigger the QPI of ISSI chips. Moreover, when `rom_spiflash_unlock()` try to clear the BP4 bit in the status register, QE (bit 6) of ISSI chip may be cleared by accident. Or if the ISSI chip doesn't accept WRSR command with argument of two bytes (since it only have status register of one byte), it may fail to clear the other protect bits (BP0~BP3) as expected. This commit makes the `rom_spiflash_unlock()` check whether the vendor is issi. if so, `rom_spiflash_unlock()` only send RDSR to read the status register, send WRSR with only 1 byte argument, and also avoid clearing the QE bit (bit 6). 3. `rom_spiflash_unlock()` always send WRSR command to clear protection bits even when there is no protection bit active. And the execution of clearing status registers, which takes about 700us, will also happen even when there's no bits cleared. This commit skips the clearing of status register if there is no protection bits active. Also move the execute_flash_command to be a bootloader API; move implementation of spi_flash_wrap_set to the bootloader
686 lines
27 KiB
C
686 lines
27 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#include "sdkconfig.h"
|
|
#include "esp32/rom/ets_sys.h"
|
|
#include "esp32/rom/gpio.h"
|
|
#include "esp32/rom/spi_flash.h"
|
|
#include "soc/spi_periph.h"
|
|
|
|
|
|
#define SPI_IDX 1
|
|
#define OTH_IDX 0
|
|
|
|
|
|
extern esp_rom_spiflash_chip_t g_rom_spiflash_chip;
|
|
|
|
static inline bool is_issi_chip(const esp_rom_spiflash_chip_t* chip)
|
|
{
|
|
return (((chip->device_id >> 16)&0xff) == 0x9D);
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_wait_idle(esp_rom_spiflash_chip_t *spi)
|
|
{
|
|
uint32_t status;
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
//wait for spi control ready
|
|
while ((REG_READ(SPI_EXT2_REG(1)) & SPI_ST)) {
|
|
}
|
|
while ((REG_READ(SPI_EXT2_REG(0)) & SPI_ST)) {
|
|
}
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
while ((REG_READ(SPI_MEM_FSM_REG(1)) & SPI_MEM_ST)) {
|
|
}
|
|
while ((REG_READ(SPI_MEM_FSM_REG(0)) & SPI_MEM_ST)) {
|
|
}
|
|
#endif
|
|
//wait for flash status ready
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_read_status(spi, &status)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
|
|
/* Modified version of esp_rom_spiflash_unlock() that replaces version in ROM.
|
|
|
|
This works around a bug where esp_rom_spiflash_unlock sometimes reads the wrong
|
|
high status byte (RDSR2 result) and then copies it back to the
|
|
flash status, which can cause the CMP bit or Status Register
|
|
Protect bit to become set.
|
|
|
|
Like other ROM SPI functions, this function is not designed to be
|
|
called directly from an RTOS environment without taking precautions
|
|
about interrupts, CPU coordination, flash mapping. However some of
|
|
the functions in esp_spi_flash.c call it.
|
|
*/
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_unlock(void)
|
|
{
|
|
uint32_t status;
|
|
uint32_t new_status;
|
|
|
|
esp_rom_spiflash_wait_idle(&g_rom_spiflash_chip);
|
|
|
|
if (is_issi_chip(&g_rom_spiflash_chip)) {
|
|
// ISSI chips have different QE position
|
|
|
|
if (esp_rom_spiflash_read_status(&g_rom_spiflash_chip, &status) != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
/* Clear all bits in the mask.
|
|
(This is different from ROM esp_rom_spiflash_unlock, which keeps all bits as-is.)
|
|
*/
|
|
new_status = status & (~ESP_ROM_SPIFLASH_BP_MASK_ISSI);
|
|
// Skip if nothing needs to be cleared. Otherwise will waste time waiting for the flash to clear nothing.
|
|
if (new_status == status) return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(SPI_IDX), SPI_WRSR_2B);
|
|
} else {
|
|
if (esp_rom_spiflash_read_statushigh(&g_rom_spiflash_chip, &status) != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
/* Clear all bits except QE, if it is set.
|
|
(This is different from ROM esp_rom_spiflash_unlock, which keeps all bits as-is.)
|
|
*/
|
|
new_status = status & ESP_ROM_SPIFLASH_QE;
|
|
SET_PERI_REG_MASK(SPI_CTRL_REG(SPI_IDX), SPI_WRSR_2B);
|
|
}
|
|
|
|
esp_rom_spiflash_wait_idle(&g_rom_spiflash_chip);
|
|
REG_WRITE(SPI_CMD_REG(SPI_IDX), SPI_FLASH_WREN);
|
|
while (REG_READ(SPI_CMD_REG(SPI_IDX)) != 0) {
|
|
}
|
|
esp_rom_spiflash_wait_idle(&g_rom_spiflash_chip);
|
|
if (esp_rom_spiflash_write_status(&g_rom_spiflash_chip, new_status) != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
#if CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
|
|
|
|
extern uint8_t g_rom_spiflash_dummy_len_plus[];
|
|
|
|
|
|
static esp_rom_spiflash_result_t esp_rom_spiflash_enable_write(esp_rom_spiflash_chip_t *spi);
|
|
|
|
//only support spi1
|
|
static esp_rom_spiflash_result_t esp_rom_spiflash_erase_chip_internal(esp_rom_spiflash_chip_t *spi)
|
|
{
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
// Chip erase.
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_CMD, SPI_FLASH_CE);
|
|
while (READ_PERI_REG(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
|
|
// check erase is finished.
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
//only support spi1
|
|
static esp_rom_spiflash_result_t esp_rom_spiflash_erase_sector_internal(esp_rom_spiflash_chip_t *spi, uint32_t addr)
|
|
{
|
|
//check if addr is 4k alignment
|
|
if (0 != (addr & 0xfff)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
// sector erase 4Kbytes erase is sector erase.
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, addr & 0xffffff);
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_CMD, SPI_FLASH_SE);
|
|
while (READ_PERI_REG(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
//only support spi1
|
|
static esp_rom_spiflash_result_t esp_rom_spiflash_erase_block_internal(esp_rom_spiflash_chip_t *spi, uint32_t addr)
|
|
{
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
// sector erase 4Kbytes erase is sector erase.
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, addr & 0xffffff);
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_CMD, SPI_FLASH_BE);
|
|
while (READ_PERI_REG(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
//only support spi1
|
|
static esp_rom_spiflash_result_t esp_rom_spiflash_program_page_internal(esp_rom_spiflash_chip_t *spi, uint32_t spi_addr,
|
|
uint32_t *addr_source, int32_t byte_length)
|
|
{
|
|
uint32_t temp_addr;
|
|
int32_t temp_bl;
|
|
uint8_t i;
|
|
uint8_t remain_word_num;
|
|
|
|
//check 4byte alignment
|
|
if (0 != (byte_length & 0x3)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
//check if write in one page
|
|
if ((spi->page_size) < ((spi_addr % (spi->page_size)) + byte_length)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
temp_addr = spi_addr;
|
|
temp_bl = byte_length;
|
|
|
|
while (temp_bl > 0 ) {
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_enable_write(spi)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
if ( temp_bl >= ESP_ROM_SPIFLASH_BUFF_BYTE_WRITE_NUM ) {
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, (temp_addr & 0xffffff) | ( ESP_ROM_SPIFLASH_BUFF_BYTE_WRITE_NUM << ESP_ROM_SPIFLASH_BYTES_LEN )); // 32 byte a block
|
|
|
|
for (i = 0; i < (ESP_ROM_SPIFLASH_BUFF_BYTE_WRITE_NUM >> 2); i++) {
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_C0 + i * 4, *addr_source++);
|
|
}
|
|
temp_bl = temp_bl - 32;
|
|
temp_addr = temp_addr + 32;
|
|
} else {
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, (temp_addr & 0xffffff) | (temp_bl << ESP_ROM_SPIFLASH_BYTES_LEN ));
|
|
|
|
remain_word_num = (0 == (temp_bl & 0x3)) ? (temp_bl >> 2) : (temp_bl >> 2) + 1;
|
|
for (i = 0; i < remain_word_num; i++) {
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_C0 + i * 4, *addr_source++);
|
|
temp_bl = temp_bl - 4;
|
|
}
|
|
temp_bl = 0;
|
|
}
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_CMD, SPI_FLASH_PP);
|
|
while ( READ_PERI_REG(PERIPHS_SPI_FLASH_CMD ) != 0 );
|
|
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_read_status(esp_rom_spiflash_chip_t *spi, uint32_t *status)
|
|
{
|
|
uint32_t status_value = ESP_ROM_SPIFLASH_BUSY_FLAG;
|
|
|
|
if (g_rom_spiflash_dummy_len_plus[1] == 0) {
|
|
while (ESP_ROM_SPIFLASH_BUSY_FLAG == (status_value & ESP_ROM_SPIFLASH_BUSY_FLAG)) {
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_STATUS, 0); // clear regisrter
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_CMD, SPI_FLASH_RDSR);
|
|
while (READ_PERI_REG(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
|
|
status_value = READ_PERI_REG(PERIPHS_SPI_FLASH_STATUS) & (spi->status_mask);
|
|
}
|
|
} else {
|
|
while (ESP_ROM_SPIFLASH_BUSY_FLAG == (status_value & ESP_ROM_SPIFLASH_BUSY_FLAG)) {
|
|
esp_rom_spiflash_read_user_cmd(&status_value, 0x05);
|
|
}
|
|
}
|
|
*status = status_value;
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_read_statushigh(esp_rom_spiflash_chip_t *spi, uint32_t *status)
|
|
{
|
|
esp_rom_spiflash_result_t ret;
|
|
esp_rom_spiflash_wait_idle(&g_rom_spiflash_chip);
|
|
ret = esp_rom_spiflash_read_user_cmd(status, 0x35);
|
|
*status = *status << 8;
|
|
return ret;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_write_status(esp_rom_spiflash_chip_t *spi, uint32_t status_value)
|
|
{
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
// update status value by status_value
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_STATUS, status_value); // write status regisrter
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_CMD, SPI_FLASH_WRSR);
|
|
while (READ_PERI_REG(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
//only support spi1
|
|
static esp_rom_spiflash_result_t esp_rom_spiflash_read_data(esp_rom_spiflash_chip_t *spi, uint32_t flash_addr,
|
|
uint32_t *addr_dest, int32_t byte_length)
|
|
{
|
|
uint32_t temp_addr;
|
|
int32_t temp_length;
|
|
uint8_t i;
|
|
uint8_t remain_word_num;
|
|
|
|
//address range check
|
|
if ((flash_addr + byte_length) > (spi->chip_size)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
temp_addr = flash_addr;
|
|
temp_length = byte_length;
|
|
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
while (temp_length > 0) {
|
|
if (temp_length >= ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM) {
|
|
//WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, temp_addr |(ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM << ESP_ROM_SPIFLASH_BYTES_LEN));
|
|
REG_WRITE(SPI_MISO_DLEN_REG(1), ((ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM << 3) - 1) << SPI_USR_MISO_DBITLEN_S);
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, temp_addr << 8);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_CMD, SPI_USR);
|
|
while (REG_READ(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
|
|
for (i = 0; i < (ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM >> 2); i++) {
|
|
*addr_dest++ = READ_PERI_REG(PERIPHS_SPI_FLASH_C0 + i * 4);
|
|
}
|
|
temp_length = temp_length - ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM;
|
|
temp_addr = temp_addr + ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM;
|
|
} else {
|
|
//WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, temp_addr |(temp_length << ESP_ROM_SPIFLASH_BYTES_LEN ));
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_ADDR, temp_addr << 8);
|
|
REG_WRITE(SPI_MISO_DLEN_REG(1), ((ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM << 3) - 1) << SPI_USR_MISO_DBITLEN_S);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_CMD, SPI_USR);
|
|
while (REG_READ(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
|
|
remain_word_num = (0 == (temp_length & 0x3)) ? (temp_length >> 2) : (temp_length >> 2) + 1;
|
|
for (i = 0; i < remain_word_num; i++) {
|
|
*addr_dest++ = READ_PERI_REG(PERIPHS_SPI_FLASH_C0 + i * 4);
|
|
}
|
|
temp_length = 0;
|
|
}
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
static esp_rom_spiflash_result_t esp_rom_spiflash_enable_write(esp_rom_spiflash_chip_t *spi)
|
|
{
|
|
uint32_t flash_status = 0;
|
|
|
|
esp_rom_spiflash_wait_idle(spi);
|
|
|
|
//enable write
|
|
WRITE_PERI_REG(PERIPHS_SPI_FLASH_CMD, SPI_FLASH_WREN); // enable write operation
|
|
while (READ_PERI_REG(PERIPHS_SPI_FLASH_CMD) != 0);
|
|
|
|
// make sure the flash is ready for writing
|
|
while (ESP_ROM_SPIFLASH_WRENABLE_FLAG != (flash_status & ESP_ROM_SPIFLASH_WRENABLE_FLAG)) {
|
|
esp_rom_spiflash_read_status(spi, &flash_status);
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
static void spi_cache_mode_switch(uint32_t modebit)
|
|
{
|
|
if ((modebit & SPI_FREAD_QIO) && (modebit & SPI_FASTRD_MODE)) {
|
|
REG_CLR_BIT(SPI_USER_REG(0), SPI_USR_MOSI);
|
|
REG_SET_BIT(SPI_USER_REG(0), SPI_USR_MISO | SPI_USR_DUMMY | SPI_USR_ADDR);
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_ADDR_BITLEN, SPI0_R_QIO_ADDR_BITSLEN);
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN, SPI0_R_QIO_DUMMY_CYCLELEN + g_rom_spiflash_dummy_len_plus[0]);
|
|
REG_SET_FIELD(SPI_USER2_REG(0), SPI_USR_COMMAND_VALUE, 0xEB);
|
|
} else if (modebit & SPI_FASTRD_MODE) {
|
|
REG_CLR_BIT(SPI_USER_REG(0), SPI_USR_MOSI);
|
|
REG_SET_BIT(SPI_USER_REG(0), SPI_USR_MISO | SPI_USR_DUMMY | SPI_USR_ADDR);
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_ADDR_BITLEN, SPI0_R_FAST_ADDR_BITSLEN);
|
|
if ((modebit & SPI_FREAD_QUAD)) {
|
|
REG_SET_FIELD(SPI_USER2_REG(0), SPI_USR_COMMAND_VALUE, 0x6B);
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN, SPI0_R_FAST_DUMMY_CYCLELEN + g_rom_spiflash_dummy_len_plus[0]);
|
|
} else if ((modebit & SPI_FREAD_DIO)) {
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_ADDR_BITLEN, SPI0_R_DIO_ADDR_BITSLEN);
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN, SPI0_R_DIO_DUMMY_CYCLELEN + g_rom_spiflash_dummy_len_plus[0]);
|
|
REG_SET_FIELD(SPI_USER2_REG(0), SPI_USR_COMMAND_VALUE, 0xBB);
|
|
} else if ((modebit & SPI_FREAD_DUAL)) {
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN, SPI0_R_FAST_DUMMY_CYCLELEN + g_rom_spiflash_dummy_len_plus[0]);
|
|
REG_SET_FIELD(SPI_USER2_REG(0), SPI_USR_COMMAND_VALUE, 0x3B);
|
|
} else {
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN, SPI0_R_FAST_DUMMY_CYCLELEN + g_rom_spiflash_dummy_len_plus[0]);
|
|
REG_SET_FIELD(SPI_USER2_REG(0), SPI_USR_COMMAND_VALUE, 0x0B);
|
|
}
|
|
} else {
|
|
REG_CLR_BIT(SPI_USER_REG(0), SPI_USR_MOSI);
|
|
if (g_rom_spiflash_dummy_len_plus[0] == 0) {
|
|
REG_CLR_BIT(SPI_USER_REG(0), SPI_USR_DUMMY);
|
|
} else {
|
|
REG_SET_BIT(SPI_USER_REG(0), SPI_USR_DUMMY);
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN, g_rom_spiflash_dummy_len_plus[0] - 1);
|
|
}
|
|
REG_SET_BIT(SPI_USER_REG(0), SPI_USR_MISO | SPI_USR_ADDR);
|
|
REG_SET_FIELD(SPI_USER1_REG(0), SPI_USR_ADDR_BITLEN, SPI0_R_SIO_ADDR_BITSLEN);
|
|
REG_SET_FIELD(SPI_USER2_REG(0), SPI_USR_COMMAND_VALUE, 0x03);
|
|
}
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_lock(void)
|
|
{
|
|
uint32_t status;
|
|
|
|
//read QE bit, not write if not QE
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_read_statushigh(&g_rom_spiflash_chip, &status)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
//enable 2 byte status writing
|
|
SET_PERI_REG_MASK(PERIPHS_SPI_FLASH_CTRL, ESP_ROM_SPIFLASH_TWO_BYTE_STATUS_EN);
|
|
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_enable_write(&g_rom_spiflash_chip)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_write_status(&g_rom_spiflash_chip, status | ESP_ROM_SPIFLASH_WR_PROTECT)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_config_readmode(esp_rom_spiflash_read_mode_t mode)
|
|
{
|
|
uint32_t modebit;
|
|
while ((REG_READ(SPI_EXT2_REG(1)) & SPI_ST)) {
|
|
}
|
|
while ((REG_READ(SPI_EXT2_REG(0)) & SPI_ST)) {
|
|
}
|
|
//clear old mode bit
|
|
CLEAR_PERI_REG_MASK(PERIPHS_SPI_FLASH_CTRL, SPI_FREAD_QIO | SPI_FREAD_QUAD | SPI_FREAD_DIO | SPI_FREAD_DUAL | SPI_FASTRD_MODE);
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(0), SPI_FREAD_QIO | SPI_FREAD_QUAD | SPI_FREAD_DIO | SPI_FREAD_DUAL | SPI_FASTRD_MODE);
|
|
//configure read mode
|
|
switch (mode) {
|
|
case ESP_ROM_SPIFLASH_QIO_MODE : modebit = SPI_FREAD_QIO | SPI_FASTRD_MODE; break;
|
|
case ESP_ROM_SPIFLASH_QOUT_MODE : modebit = SPI_FREAD_QUAD | SPI_FASTRD_MODE; break;
|
|
case ESP_ROM_SPIFLASH_DIO_MODE : modebit = SPI_FREAD_DIO | SPI_FASTRD_MODE; break;
|
|
case ESP_ROM_SPIFLASH_DOUT_MODE : modebit = SPI_FREAD_DUAL | SPI_FASTRD_MODE; break;
|
|
case ESP_ROM_SPIFLASH_FASTRD_MODE: modebit = SPI_FASTRD_MODE; break;
|
|
case ESP_ROM_SPIFLASH_SLOWRD_MODE: modebit = 0; break;
|
|
default : modebit = 0;
|
|
}
|
|
|
|
SET_PERI_REG_MASK(PERIPHS_SPI_FLASH_CTRL, modebit);
|
|
SET_PERI_REG_MASK(SPI_CTRL_REG(0), modebit);
|
|
spi_cache_mode_switch(modebit);
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_erase_chip(void)
|
|
{
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_enable_write(&g_rom_spiflash_chip)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_erase_chip_internal(&g_rom_spiflash_chip)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_erase_block(uint32_t block_num)
|
|
{
|
|
// flash write is always 1 line currently
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, ESP_ROM_SPIFLASH_W_SIO_ADDR_BITSLEN);
|
|
//check program size
|
|
if (block_num >= ((g_rom_spiflash_chip.chip_size) / (g_rom_spiflash_chip.block_size))) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_enable_write(&g_rom_spiflash_chip)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_erase_block_internal(&g_rom_spiflash_chip, block_num * (g_rom_spiflash_chip.block_size))) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_erase_sector(uint32_t sector_num)
|
|
{
|
|
// flash write is always 1 line currently
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, ESP_ROM_SPIFLASH_W_SIO_ADDR_BITSLEN);
|
|
//check program size
|
|
if (sector_num >= ((g_rom_spiflash_chip.chip_size) / (g_rom_spiflash_chip.sector_size))) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_enable_write(&g_rom_spiflash_chip)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_erase_sector_internal(&g_rom_spiflash_chip, sector_num * (g_rom_spiflash_chip.sector_size))) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_write(uint32_t target, const uint32_t *src_addr, int32_t len)
|
|
{
|
|
uint32_t page_size;
|
|
uint32_t pgm_len, pgm_num;
|
|
uint8_t i;
|
|
|
|
// flash write is always 1 line currently
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, ESP_ROM_SPIFLASH_W_SIO_ADDR_BITSLEN);
|
|
//check program size
|
|
if ( (target + len) > (g_rom_spiflash_chip.chip_size)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
page_size = g_rom_spiflash_chip.page_size;
|
|
pgm_len = page_size - (target % page_size);
|
|
if (len < pgm_len) {
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_program_page_internal(&g_rom_spiflash_chip,
|
|
target, (uint32_t *)src_addr, len)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
} else {
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_program_page_internal(&g_rom_spiflash_chip,
|
|
target, (uint32_t *)src_addr, pgm_len)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
//whole page program
|
|
pgm_num = (len - pgm_len) / page_size;
|
|
for (i = 0; i < pgm_num; i++) {
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_program_page_internal(&g_rom_spiflash_chip,
|
|
target + pgm_len, (uint32_t *)src_addr + (pgm_len >> 2), page_size)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
pgm_len += page_size;
|
|
}
|
|
|
|
//remain parts to program
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_program_page_internal(&g_rom_spiflash_chip,
|
|
target + pgm_len, (uint32_t *)src_addr + (pgm_len >> 2), len - pgm_len)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
}
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_write_encrypted(uint32_t flash_addr, uint32_t *data, uint32_t len)
|
|
{
|
|
esp_rom_spiflash_result_t ret = ESP_ROM_SPIFLASH_RESULT_OK;
|
|
uint32_t i;
|
|
|
|
if ((flash_addr & 0x1f) || (len & 0x1f)) { //check 32 byte alignment
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
esp_rom_spiflash_write_encrypted_enable();
|
|
|
|
for (i = 0; i < (len >> 5); i++) {
|
|
if ((ret = esp_rom_spiflash_prepare_encrypted_data(flash_addr + (i << 5), data + (i << 3))) != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
break;
|
|
}
|
|
|
|
if ((ret = esp_rom_spiflash_write(flash_addr + (i << 5), data, 32)) != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
esp_rom_spiflash_write_encrypted_disable();
|
|
|
|
return ret;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_read(uint32_t target, uint32_t *dest_addr, int32_t len)
|
|
{
|
|
// QIO or SIO, non-QIO regard as SIO
|
|
uint32_t modebit;
|
|
modebit = READ_PERI_REG(PERIPHS_SPI_FLASH_CTRL);
|
|
if ((modebit & SPI_FREAD_QIO) && (modebit & SPI_FASTRD_MODE)) {
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_MOSI);
|
|
REG_SET_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_MISO | SPI_USR_DUMMY | SPI_USR_ADDR);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, SPI1_R_QIO_ADDR_BITSLEN);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_DUMMY_CYCLELEN, SPI1_R_QIO_DUMMY_CYCLELEN + g_rom_spiflash_dummy_len_plus[1]);
|
|
//REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG2, SPI_USR_COMMAND_VALUE, 0xEB);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_USRREG2, (0x7 << SPI_USR_COMMAND_BITLEN_S) | 0xEB);
|
|
} else if (modebit & SPI_FASTRD_MODE) {
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_MOSI);
|
|
REG_SET_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_MISO | SPI_USR_ADDR);
|
|
if (modebit & SPI_FREAD_DIO) {
|
|
if (g_rom_spiflash_dummy_len_plus[1] == 0) {
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, SPI1_R_DIO_ADDR_BITSLEN);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_USRREG2, (0x7 << SPI_USR_COMMAND_BITLEN_S) | 0xBB);
|
|
} else {
|
|
REG_SET_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, SPI1_R_DIO_ADDR_BITSLEN);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_DUMMY_CYCLELEN, g_rom_spiflash_dummy_len_plus[1] - 1);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG2, SPI_USR_COMMAND_VALUE, 0xBB);
|
|
}
|
|
} else {
|
|
if ((modebit & SPI_FREAD_QUAD)) {
|
|
//REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG2, SPI_USR_COMMAND_VALUE, 0x6B);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_USRREG2, (0x7 << SPI_USR_COMMAND_BITLEN_S) | 0x6B);
|
|
} else if ((modebit & SPI_FREAD_DUAL)) {
|
|
//REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG2, SPI_USR_COMMAND_VALUE, 0x3B);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_USRREG2, (0x7 << SPI_USR_COMMAND_BITLEN_S) | 0x3B);
|
|
} else {
|
|
//REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG2, SPI_USR_COMMAND_VALUE, 0x0B);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_USRREG2, (0x7 << SPI_USR_COMMAND_BITLEN_S) | 0x0B);
|
|
}
|
|
REG_SET_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, SPI1_R_FAST_ADDR_BITSLEN);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_DUMMY_CYCLELEN, SPI1_R_FAST_DUMMY_CYCLELEN + g_rom_spiflash_dummy_len_plus[1]);
|
|
}
|
|
} else {
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_MOSI);
|
|
if (g_rom_spiflash_dummy_len_plus[1] == 0) {
|
|
REG_CLR_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
} else {
|
|
REG_SET_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_DUMMY);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_DUMMY_CYCLELEN, g_rom_spiflash_dummy_len_plus[1] - 1);
|
|
}
|
|
REG_SET_BIT(PERIPHS_SPI_FLASH_USRREG, SPI_USR_MISO | SPI_USR_ADDR);
|
|
REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG1, SPI_USR_ADDR_BITLEN, SPI1_R_SIO_ADDR_BITSLEN);
|
|
//REG_SET_FIELD(PERIPHS_SPI_FLASH_USRREG2, SPI_USR_COMMAND_VALUE, 0x03);
|
|
REG_WRITE(PERIPHS_SPI_FLASH_USRREG2, (0x7 << SPI_USR_COMMAND_BITLEN_S) | 0x03);
|
|
}
|
|
|
|
if ( ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_read_data(&g_rom_spiflash_chip, target, dest_addr, len)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t esp_rom_spiflash_erase_area(uint32_t start_addr, uint32_t area_len)
|
|
{
|
|
int32_t total_sector_num;
|
|
int32_t head_sector_num;
|
|
uint32_t sector_no;
|
|
uint32_t sector_num_per_block;
|
|
|
|
//set read mode to Fastmode ,not QDIO mode for erase
|
|
//
|
|
// TODO: this is probably a bug as it doesn't re-enable QIO mode, not serious as this
|
|
// function is not used in IDF.
|
|
esp_rom_spiflash_config_readmode(ESP_ROM_SPIFLASH_SLOWRD_MODE);
|
|
|
|
//check if area is oversize of flash
|
|
if ((start_addr + area_len) > g_rom_spiflash_chip.chip_size) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
//start_addr is aligned as sector boundary
|
|
if (0 != (start_addr % g_rom_spiflash_chip.sector_size)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
//Unlock flash to enable erase
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_unlock(/*&g_rom_spiflash_chip*/)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
|
|
sector_no = start_addr / g_rom_spiflash_chip.sector_size;
|
|
sector_num_per_block = g_rom_spiflash_chip.block_size / g_rom_spiflash_chip.sector_size;
|
|
total_sector_num = (0 == (area_len % g_rom_spiflash_chip.sector_size)) ? area_len / g_rom_spiflash_chip.sector_size :
|
|
1 + (area_len / g_rom_spiflash_chip.sector_size);
|
|
|
|
//check if erase area reach over block boundary
|
|
head_sector_num = sector_num_per_block - (sector_no % sector_num_per_block);
|
|
|
|
head_sector_num = (head_sector_num >= total_sector_num) ? total_sector_num : head_sector_num;
|
|
|
|
//JJJ, BUG of 6.0 erase
|
|
//middle part of area is aligned by blocks
|
|
total_sector_num -= head_sector_num;
|
|
|
|
//head part of area is erased
|
|
while (0 != head_sector_num) {
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_erase_sector(sector_no)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
sector_no++;
|
|
head_sector_num--;
|
|
}
|
|
while (total_sector_num > sector_num_per_block) {
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_erase_block(sector_no / sector_num_per_block)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
sector_no += sector_num_per_block;
|
|
total_sector_num -= sector_num_per_block;
|
|
}
|
|
|
|
//tail part of area burn
|
|
while (0 < total_sector_num) {
|
|
if (ESP_ROM_SPIFLASH_RESULT_OK != esp_rom_spiflash_erase_sector(sector_no)) {
|
|
return ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
sector_no++;
|
|
total_sector_num--;
|
|
}
|
|
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
|
|
#endif
|