esp-idf/components/hal/esp32/include/hal/i2s_ll.h

/*
 * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/*******************************************************************************
 * NOTICE
 * The hal is not public api, don't use in application code.
 * See readme.md in hal/include/hal/readme.md
 ******************************************************************************/

// The LL layer for ESP32 I2S register operations

#pragma once

#include <stdbool.h>
#include "hal/misc.h"
#include "soc/i2s_periph.h"
#include "soc/i2s_struct.h"
#include "hal/i2s_types.h"

#ifdef __cplusplus
extern "C" {
#endif

// Get I2S hardware instance with giving i2s num
#define I2S_LL_GET_HW(num) (((num) == 0) ? (&I2S0) : (((num) == 1) ? (&I2S1) : NULL))

#define I2S_LL_AD_BCK_FACTOR           (2)
#define I2S_LL_PDM_BCK_FACTOR          (64)

#define I2S_LL_MCLK_DIVIDER_BIT_WIDTH  (6)
#define I2S_LL_MCLK_DIVIDER_MAX        ((1 << I2S_LL_MCLK_DIVIDER_BIT_WIDTH) - 1)

#define I2S_LL_BCK_MAX_PRESCALE   (64)

#define I2S_LL_EVENT_RX_EOF         BIT(9)
#define I2S_LL_EVENT_TX_EOF         BIT(12)
#define I2S_LL_EVENT_RX_DSCR_ERR    BIT(13)
#define I2S_LL_EVENT_TX_DSCR_ERR    BIT(14)
#define I2S_LL_EVENT_TX_TEOF        BIT(16)
#define I2S_INTR_MAX                (UINT32_MAX)

#define I2S_LL_TX_EVENT_MASK        I2S_LL_EVENT_TX_EOF
#define I2S_LL_RX_EVENT_MASK        I2S_LL_EVENT_RX_EOF

#define I2S_LL_PLL_F160M_CLK_FREQ   (160 * 1000000) // PLL_F160M_CLK: 160MHz
#define I2S_LL_DEFAULT_PLL_CLK_FREQ     I2S_LL_PLL_F160M_CLK_FREQ    // The default PLL clock frequency while using I2S_CLK_SRC_DEFAULT

/**
 * @brief I2S clock configuration structure
 * @note Fmclk = Fsclk /(integ+numer/denom)
 */
typedef struct {
    uint16_t integ;     // Integer part of I2S module clock divider
    uint16_t denom;     // Denominator part of I2S module clock divider
    uint16_t numer;     // Numerator part of I2S module clock divider
} i2s_ll_mclk_div_t;

/**
 * @brief Enable DMA descriptor owner check
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param en whether to enable owner check
 */
static inline void i2s_ll_dma_enable_owner_check(i2s_dev_t *hw, bool en)
{
    hw->lc_conf.check_owner = en;
}

/**
 * @brief Enable DMA descriptor write back
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param en whether to enable write back
 */
static inline void i2s_ll_dma_enable_auto_write_back(i2s_dev_t *hw, bool en)
{
    hw->lc_conf.out_auto_wrback = en;
}

/**
 * @brief I2S DMA generate EOF event on data in FIFO poped out
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param en True to enable, False to disable
 */
static inline void i2s_ll_dma_enable_eof_on_fifo_empty(i2s_dev_t *hw, bool en)
{
    hw->lc_conf.out_eof_mode = en;
}

/**
 * @brief I2S module general init, enable I2S clock.
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_enable_clock(i2s_dev_t *hw)
{
    if (hw->clkm_conf.clk_en == 0) {
        hw->clkm_conf.clk_en = 1;
        hw->conf2.val = 0;
    }
}

/**
 * @brief I2S module disable clock.
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_disable_clock(i2s_dev_t *hw)
{
    if (hw->clkm_conf.clk_en == 1) {
        hw->clkm_conf.clk_en = 0;
    }
}

/**
 * @brief I2S tx msb right enable
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable tx msb right
 */
static inline void i2s_ll_tx_enable_msb_right(i2s_dev_t *hw, bool enable)
{
    hw->conf.tx_msb_right = enable;
}

/**
 * @brief I2S rx msb right enable
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable rx msb right
 */
static inline void i2s_ll_rx_enable_msb_right(i2s_dev_t *hw, bool enable)
{
    hw->conf.rx_msb_right = enable;
}

/**
 * @brief I2S tx right channel first
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable send right channel first
 */
static inline void i2s_ll_tx_enable_right_first(i2s_dev_t *hw, bool enable)
{
    hw->conf.tx_right_first = enable;
}

/**
 * @brief I2S rx right channel first
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable receive right channel first
 */
static inline void i2s_ll_rx_enable_right_first(i2s_dev_t *hw, bool enable)
{
    hw->conf.rx_right_first = enable;
}

/**
 * @brief I2S tx fifo module force enable
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable tx fifo module
 */
static inline void i2s_ll_tx_force_enable_fifo_mod(i2s_dev_t *hw, bool enable)
{
    hw->fifo_conf.tx_fifo_mod_force_en = enable;
}

/**
 * @brief I2S rx fifo module force enable
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable rx fifo module
 */
static inline void i2s_ll_rx_force_enable_fifo_mod(i2s_dev_t *hw, bool enable)
{
    hw->fifo_conf.rx_fifo_mod_force_en = enable;
}
/**
 * @brief Enable I2S TX slave mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param slave_en Set true to enable slave mode
 */
static inline void i2s_ll_tx_set_slave_mod(i2s_dev_t *hw, bool slave_en)
{
    hw->conf.tx_slave_mod = slave_en;
}

/**
 * @brief Enable I2S RX slave mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param slave_en Set true to enable slave mode
 */
static inline void i2s_ll_rx_set_slave_mod(i2s_dev_t *hw, bool slave_en)
{
    hw->conf.rx_slave_mod = slave_en;
}

/**
 * @brief Reset I2S TX module
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_reset(i2s_dev_t *hw)
{
    hw->conf.tx_reset = 1;
    hw->conf.tx_reset = 0;
    hw->lc_conf.out_rst = 1;
    hw->lc_conf.out_rst = 0;
}

/**
 * @brief Reset I2S RX module
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_reset(i2s_dev_t *hw)
{
    hw->conf.rx_reset = 1;
    hw->conf.rx_reset = 0;
    hw->lc_conf.in_rst = 1;
    hw->lc_conf.in_rst = 0;
}

/**
 * @brief Reset I2S TX FIFO
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_reset_fifo(i2s_dev_t *hw)
{
    hw->conf.tx_fifo_reset = 1;
    hw->conf.tx_fifo_reset = 0;
}

/**
 * @brief Reset I2S RX FIFO
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_reset_fifo(i2s_dev_t *hw)
{
    hw->conf.rx_fifo_reset = 1;
    hw->conf.rx_fifo_reset = 0;
}

/**
 * @brief Set TX source clock
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param src I2S source clock
 */
static inline void i2s_ll_tx_clk_set_src(i2s_dev_t *hw, i2s_clock_src_t src)
{
    //0: disable APLL clock, I2S module will using PLL_D2_CLK(160M) as source clock
    //1: Enable APLL clock, I2S module will using APLL as source clock
    hw->clkm_conf.clka_en = (src == I2S_CLK_SRC_APLL) ? 1 : 0;
}

/**
 * @brief Set RX source clock
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param src I2S source clock
 */
static inline void i2s_ll_rx_clk_set_src(i2s_dev_t *hw, i2s_clock_src_t src)
{
    //0: disable APLL clock, I2S module will using PLL_D2_CLK(160M) as source clock
    //1: Enable APLL clock, I2S module will using APLL as source clock
    hw->clkm_conf.clka_en = (src == I2S_CLK_SRC_APLL) ? 1 : 0;
}

/**
 * @brief Set I2S tx bck div num
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param val value to set tx bck div num
 */
static inline void i2s_ll_tx_set_bck_div_num(i2s_dev_t *hw, uint32_t val)
{
    hw->sample_rate_conf.tx_bck_div_num = val;
}

/**
 * @brief Configure I2S module clock divider
 * @note mclk on ESP32 is shared by both TX and RX channel
 *       mclk = sclk / (mclk_div + b/a)
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param mclk_div integer part of the division from sclk to mclk
 * @param a Denominator of decimal part
 * @param b Numerator of decimal part
 */
static inline void i2s_ll_set_raw_mclk_div(i2s_dev_t *hw, uint32_t mclk_div, uint32_t a, uint32_t b)
{
    HAL_FORCE_MODIFY_U32_REG_FIELD(hw->clkm_conf, clkm_div_num, mclk_div);
    hw->clkm_conf.clkm_div_b = b;
    hw->clkm_conf.clkm_div_a = a;
}

/**
 * @brief Configure I2S TX module clock divider
 * @note mclk on ESP32 is shared by both TX and RX channel
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param mclk_div The mclk division coefficients
 */
static inline void i2s_ll_tx_set_mclk(i2s_dev_t *hw, const i2s_ll_mclk_div_t *mclk_div)
{
    /* Workaround for inaccurate clock while switching from a relatively low sample rate to a high sample rate
     * Set to particular coefficients first then update to the target coefficients,
     * otherwise the clock division might be inaccurate.
     * the general idea is to set a value that unlike to calculate from the regular decimal */
    i2s_ll_set_raw_mclk_div(hw, 7, 47, 3);
    i2s_ll_set_raw_mclk_div(hw, mclk_div->integ, mclk_div->denom, mclk_div->numer);
}

/**
 * @brief Set I2S rx bck div num
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param val value to set rx bck div num
 */
static inline void i2s_ll_rx_set_bck_div_num(i2s_dev_t *hw, uint32_t val)
{
    hw->sample_rate_conf.rx_bck_div_num = val;
}

/**
 * @brief Configure I2S RX module clock divider
 * @note mclk on ESP32 is shared by both TX and RX channel
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param mclk_div The mclk division coefficients
 */
static inline void i2s_ll_rx_set_mclk(i2s_dev_t *hw, const i2s_ll_mclk_div_t *mclk_div)
{
    // TX and RX channel on ESP32 shares a same mclk
    i2s_ll_tx_set_mclk(hw, mclk_div);
}

/**
 * @brief Enable interrupt by mask
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param mask Interrupt event mask
 * @param en true to enable, false to disable
 */
static inline void i2s_ll_enable_intr(i2s_dev_t *hw, uint32_t mask, bool en)
{
    uint32_t int_ena_mask = hw->int_ena.val;
    if (en) {
        int_ena_mask |= mask;
    } else {
        int_ena_mask &= ~mask;
    }
    hw->int_ena.val = int_ena_mask;
}

/**
 * @brief Enable TX interrupt
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_enable_intr(i2s_dev_t *hw)
{
    hw->int_ena.out_eof = 1;
}

/**
 * @brief Disable TX interrupt
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_disable_intr(i2s_dev_t *hw)
{
    hw->int_ena.out_eof = 0;
}

/**
 * @brief Enable RX interrupt
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_enable_intr(i2s_dev_t *hw)
{
    hw->int_ena.in_suc_eof = 1;
}

/**
 * @brief Disable RX interrupt
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_disable_intr(i2s_dev_t *hw)
{
    hw->int_ena.in_suc_eof = 0;
}

/**
 * @brief Get interrupt status register address
 *
 * @param hw Peripheral I2S hardware instance address.
 * @return interrupt status register address
 */
static inline volatile void *i2s_ll_get_intr_status_reg(i2s_dev_t *hw)
{
    return &hw->int_st;
}

/**
 * @brief Get I2S interrupt status
 *
 * @param hw Peripheral I2S hardware instance address.
 * @return
 *        - module interrupt status
 */
__attribute__((always_inline))
static inline uint32_t i2s_ll_get_intr_status(i2s_dev_t *hw)
{
    return hw->int_st.val;
}

/**
 * @brief Get channel interrupt status register address
 */
static inline volatile void *i2s_ll_get_interrupt_status_reg(i2s_dev_t *hw)
{
    return (volatile void *)(&hw->int_st);
}

/**
 * @brief Clear I2S interrupt status
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param clr_mask Interrupt mask to clear interrupt status
 */
__attribute__((always_inline))
static inline void i2s_ll_clear_intr_status(i2s_dev_t *hw, uint32_t clr_mask)
{
    hw->int_clr.val = clr_mask;
}

/**
 * @brief Reset dma out
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_reset_dma(i2s_dev_t *hw)
{
    hw->lc_conf.out_rst = 1;
    hw->lc_conf.out_rst = 0;
}

/**
 * @brief Reset dma in
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_reset_dma(i2s_dev_t *hw)
{
    hw->lc_conf.in_rst = 1;
    hw->lc_conf.in_rst = 0;
}

/**
 * @brief Start out link
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_start_out_link(i2s_dev_t *hw)
{
    hw->out_link.start = 1;
}

/**
 * @brief Set I2S out link address
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param val value to set out link address
 */
static inline void i2s_ll_set_out_link_addr(i2s_dev_t *hw, uint32_t val)
{
    hw->out_link.addr = val;
}

/**
 * @brief Start TX module
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_start(i2s_dev_t *hw)
{
    hw->conf.tx_start = 1;
}

/**
 * @brief Start RX module
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_start(i2s_dev_t *hw)
{
    hw->conf.rx_start = 1;
}

/**
 * @brief Configure TX DMA descriptor address and start TX DMA
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param link_addr DMA descriptor link address.
 */
static inline void i2s_ll_tx_start_link(i2s_dev_t *hw, uint32_t link_addr)
{
    i2s_ll_set_out_link_addr(hw, link_addr);
    i2s_ll_start_out_link(hw);
}

/**
 * @brief Configure RX DMA descriptor address and start RX DMA
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param link_addr DMA descriptor link address.
 */
static inline void i2s_ll_rx_start_link(i2s_dev_t *hw, uint32_t link_addr)
{
    hw->in_link.addr = link_addr;
    hw->in_link.start = 1;
}

/**
 * @brief Stop TX module
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_stop(i2s_dev_t *hw)
{
    hw->conf.tx_start = 0;
}

/**
 * @brief Stop RX module
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_stop(i2s_dev_t *hw)
{
    hw->conf.rx_start = 0;
}

/**
 * @brief Stop out link
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_stop_link(i2s_dev_t *hw)
{
    hw->out_link.stop = 1;
}

/**
 * @brief Stop in link
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_stop_link(i2s_dev_t *hw)
{
    hw->in_link.stop = 1;
}

/**
 * @brief Get I2S out eof descriptor address
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param eof_addr Pointer to accept out eof des address
 */
__attribute__((always_inline))
static inline void i2s_ll_tx_get_eof_des_addr(i2s_dev_t *hw, uint32_t *eof_addr)
{
    *eof_addr = hw->out_eof_des_addr;
}

/**
 * @brief Get I2S in eof descriptor address
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param eof_addr Pointer to accept in eof des address
 */
__attribute__((always_inline))
static inline void i2s_ll_rx_get_eof_des_addr(i2s_dev_t *hw, uint32_t *eof_addr)
{
    *eof_addr = hw->in_eof_des_addr;
}

/**
 * @brief Configure the received length to trigger in_suc_eof interrupt
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param eof_num the byte length to trigger in_suc_eof interrupt
 */
static inline void i2s_ll_rx_set_eof_num(i2s_dev_t *hw, int eof_num)
{
    // On ESP32, the eof_num count in words.
    hw->rx_eof_num = eof_num / 4;
}

/**
 * @brief Set I2S tx bits mod
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param val value to set tx bits mod
 */
static inline void i2s_ll_tx_set_bits_mod(i2s_dev_t *hw, uint32_t val)
{
    hw->sample_rate_conf.tx_bits_mod = val;
}

/**
 * @brief Congfigure TX chan bit and audio data bit, on ESP32, sample_bit should equals to data_bit
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param chan_bit The chan bit width
 * @param data_bit The audio data bit width
 */
static inline void i2s_ll_tx_set_sample_bit(i2s_dev_t *hw, uint8_t chan_bit, int data_bit)
{
    hw->fifo_conf.tx_fifo_mod = (chan_bit <= I2S_DATA_BIT_WIDTH_16BIT ? 0 : 2);
    hw->sample_rate_conf.tx_bits_mod = data_bit;
}

/**
 * @brief Congfigure RX chan bit and audio data bit, on ESP32, sample_bit should equals to data_bit
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param chan_bit The chan bit width
 * @param data_bit The audio data bit width
 */
static inline void i2s_ll_rx_set_sample_bit(i2s_dev_t *hw, uint8_t chan_bit, int data_bit)
{
    hw->fifo_conf.rx_fifo_mod = (chan_bit <= I2S_DATA_BIT_WIDTH_16BIT ? 0 : 2);
    hw->sample_rate_conf.rx_bits_mod = data_bit;
}

/**
 * @brief Set whether to continue I2S signal on bus when TX FIFO is empty
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param en whether to stop when tx fifo is empty
 */
static inline void i2s_ll_tx_stop_on_fifo_empty(i2s_dev_t *hw, bool en)
{
    hw->conf1.tx_stop_en = en;
}

/**
 * @brief Set whether to bypass the internal PCM module
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param bypass whether to bypass the PCM module
 */
static inline void i2s_ll_tx_bypass_pcm(i2s_dev_t *hw, bool bypass)
{
    hw->conf1.tx_pcm_bypass = bypass;
}

/**
 * @brief Enable I2S DMA
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param ena Set true to enable DMA
 */
static inline void i2s_ll_enable_dma(i2s_dev_t *hw, bool ena)
{
    hw->fifo_conf.dscr_en = ena;
}

/**
 * @brief Configure TX WS signal width
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param width WS width in BCK cycle
 */
static inline void i2s_ll_tx_set_ws_width(i2s_dev_t *hw, int width)
{
    hw->conf.tx_short_sync = width == 1 ? 1 : 0;
}

/**
 * @brief Configure RX WS signal width
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param width WS width in BCK cycle
 */
static inline void i2s_ll_rx_set_ws_width(i2s_dev_t *hw, int width)
{
    hw->conf.rx_short_sync = width == 1 ? 1 : 0;
}

/**
 * @brief Enable TX MSB shift, the data will be launch at the first BCK clock
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param msb_shift_enable Set true to enable MSB shift
 */
static inline void i2s_ll_tx_enable_msb_shift(i2s_dev_t *hw, bool msb_shift_enable)
{
    hw->conf.tx_msb_shift = msb_shift_enable;
}

/**
 * @brief Enable RX MSB shift, the data will be launch at the first BCK clock
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param msb_shift_enable Set true to enable MSB shift
 */
static inline void i2s_ll_rx_enable_msb_shift(i2s_dev_t *hw, bool msb_shift_enable)
{
    hw->conf.rx_msb_shift = msb_shift_enable;
}

/**
 * @brief Set I2S PDM TX chan mode
 * @param slot_mask select slot to send data
 * @param is_mono is mono mode
 */
static inline void i2s_ll_tx_select_pdm_slot(i2s_dev_t *hw, i2s_pdm_slot_mask_t slot_mask, bool is_mono)
{
    if (is_mono) {
        switch (slot_mask)
        {
        case I2S_PDM_SLOT_RIGHT:
            hw->conf_chan.tx_chan_mod = 3;
            break;
        case I2S_PDM_SLOT_LEFT:
            hw->conf_chan.tx_chan_mod = 4;
            break;
        case I2S_PDM_SLOT_BOTH:
            hw->conf_chan.tx_chan_mod = 1; // 1 & 2 has same effect
            break;
        default:
            break;
        }
    } else {
        switch (slot_mask)
        {
        case I2S_PDM_SLOT_RIGHT:
            hw->conf_chan.tx_chan_mod = 1;
            break;
        case I2S_PDM_SLOT_LEFT:
            hw->conf_chan.tx_chan_mod = 2;
            break;
        case I2S_PDM_SLOT_BOTH:
            hw->conf_chan.tx_chan_mod = 0;
            break;
        default:
            break;
        }
    }
}

/**
 * @brief Set I2S PDM RX chan mode
 * @param slot_mask select slot to send data
 */
static inline void i2s_ll_rx_select_pdm_slot(i2s_dev_t *hw, i2s_pdm_slot_mask_t slot_mask)
{
    switch (slot_mask)
    {
    case I2S_PDM_SLOT_RIGHT:
        hw->conf_chan.rx_chan_mod = 1;
        break;
    case I2S_PDM_SLOT_LEFT:
        hw->conf_chan.rx_chan_mod = 2;
        break;
    case I2S_PDM_SLOT_BOTH:
        hw->conf_chan.rx_chan_mod = 0;
        break;
    default:
        break;
    }
}

/**
 * @brief Set I2S tx chan mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param slot_mask select slot to send data
 * @param is_mono is mono mode
 */
static inline void i2s_ll_tx_select_std_slot(i2s_dev_t *hw, i2s_std_slot_mask_t slot_mask, bool is_mono)
{
    if (is_mono) {
        switch (slot_mask)
        {
        case I2S_STD_SLOT_RIGHT:
            hw->conf_chan.tx_chan_mod = 3;
            break;
        case I2S_STD_SLOT_LEFT:
            hw->conf_chan.tx_chan_mod = 4;
            break;
        case I2S_STD_SLOT_BOTH:
            hw->conf_chan.tx_chan_mod = 1; // 1 & 2 has same effect
            break;
        default:
            break;
        }
    } else {
        switch (slot_mask)
        {
        case I2S_STD_SLOT_RIGHT:
            hw->conf_chan.tx_chan_mod = 1;
            break;
        case I2S_STD_SLOT_LEFT:
            hw->conf_chan.tx_chan_mod = 2;
            break;
        case I2S_STD_SLOT_BOTH:
            hw->conf_chan.tx_chan_mod = 0;
            break;
        default:
            break;
        }
    }
}

/**
 * @brief Set I2S rx chan mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param slot_mask select slot to receive data
 * @param is_msb_right the slot sequence is affected by msb_right according to TRM
 */
static inline void i2s_ll_rx_select_std_slot(i2s_dev_t *hw, i2s_std_slot_mask_t slot_mask, bool is_msb_right)
{
    switch (slot_mask)
    {
    case I2S_STD_SLOT_RIGHT:
        hw->conf_chan.rx_chan_mod = is_msb_right ? 1 : 2;
        break;
    case I2S_STD_SLOT_LEFT:
        hw->conf_chan.rx_chan_mod = is_msb_right ? 2 : 1;
        break;
    case I2S_STD_SLOT_BOTH:
        hw->conf_chan.rx_chan_mod = 0;
        break;
    default:
        break;
    }
}

/**
 * @brief Enable TX mono mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param mono_ena Set true to enable mono mde.
 */
static inline void i2s_ll_tx_enable_mono_mode(i2s_dev_t *hw, bool mono_ena)
{
    int data_bit = hw->sample_rate_conf.tx_bits_mod;
    hw->fifo_conf.tx_fifo_mod = data_bit <= I2S_DATA_BIT_WIDTH_16BIT ? mono_ena : 2 + mono_ena;
}

/**
 * @brief Enable RX mono mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param mono_ena Set true to enable mono mde.
 */
static inline void i2s_ll_rx_enable_mono_mode(i2s_dev_t *hw, bool mono_ena)
{
    int data_bit = hw->sample_rate_conf.rx_bits_mod;
    hw->fifo_conf.rx_fifo_mod = data_bit <= I2S_DATA_BIT_WIDTH_16BIT ? mono_ena : 2 + mono_ena;
}

/**
 * @brief Enable I2S loopback mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param loopback_en Set true to share BCK and WS signal for tx module and rx module.
 */
static inline void i2s_ll_share_bck_ws(i2s_dev_t *hw, bool loopback_en)
{
    hw->conf.sig_loopback = loopback_en;
}



/******************************I2S PDM Configurations*************************************/
/**
 * @brief Configure RX PDM downsample
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param dsr PDM downsample configuration paramater
 */
static inline void i2s_ll_rx_set_pdm_dsr(i2s_dev_t *hw, i2s_pdm_dsr_t dsr)
{
    hw->pdm_conf.rx_sinc_dsr_16_en = dsr;
}

/**
 * @brief Get RX PDM downsample configuration
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param dsr Pointer to accept PDM downsample configuration
 */
static inline void i2s_ll_rx_get_pdm_dsr(i2s_dev_t *hw, i2s_pdm_dsr_t *dsr)
{
    *dsr = (i2s_pdm_dsr_t)hw->pdm_conf.rx_sinc_dsr_16_en;
}

/**
 * @brief Enable I2S TX STD mode
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_tx_enable_std(i2s_dev_t *hw)
{
    hw->conf2.val = 0;
    hw->pdm_conf.tx_pdm_en = false;
    hw->pdm_conf.pcm2pdm_conv_en = false;
}

/**
 * @brief Enable I2S RX STD mode
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_enable_std(i2s_dev_t *hw)
{
    hw->conf2.val = 0;
    hw->pdm_conf.rx_pdm_en = false;
    hw->pdm_conf.pdm2pcm_conv_en = false;
}

/**
 * @brief Enable I2S TX PDM mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param pdm_ena Set true to enable TX PDM mode
 */
static inline void i2s_ll_tx_enable_pdm(i2s_dev_t *hw)
{
    hw->conf2.val = 0;
    hw->pdm_conf.tx_pdm_en = true;
    hw->pdm_conf.pcm2pdm_conv_en = true;
}

/**
 * @brief Enable I2S RX PDM mode
 *
 * @param hw Peripheral I2S hardware instance address.
 */
static inline void i2s_ll_rx_enable_pdm(i2s_dev_t *hw)
{
    hw->conf2.val = 0;
    hw->pdm_conf.rx_pdm_en = true;
    hw->pdm_conf.pdm2pcm_conv_en = true;
}

/**
 * @brief Set I2S TX PDM prescale
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param prescale I2S TX PDM prescale
 */
static inline void i2s_ll_tx_set_pdm_prescale(i2s_dev_t *hw, bool prescale)
{
    HAL_FORCE_MODIFY_U32_REG_FIELD(hw->pdm_conf, tx_prescale, prescale);
}

/**
 * @brief Set I2S TX PDM high pass filter scaling
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param sig_scale I2S TX PDM signal scaling before transmit to the filter
 */
static inline void i2s_ll_tx_set_pdm_hp_scale(i2s_dev_t *hw, i2s_pdm_sig_scale_t sig_scale)
{
    hw->pdm_conf.tx_hp_in_shift = sig_scale;
}

/**
 * @brief Set I2S TX PDM low pass filter scaling
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param sig_scale I2S TX PDM signal scaling before transmit to the filter
 */
static inline void i2s_ll_tx_set_pdm_lp_scale(i2s_dev_t *hw, i2s_pdm_sig_scale_t sig_scale)
{
    hw->pdm_conf.tx_lp_in_shift = sig_scale;
}

/**
 * @brief Set I2S TX PDM sinc filter scaling
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param sig_scale I2S TX PDM signal scaling before transmit to the filter
 */
static inline void i2s_ll_tx_set_pdm_sinc_scale(i2s_dev_t *hw, i2s_pdm_sig_scale_t sig_scale)
{
    hw->pdm_conf.tx_sinc_in_shift = sig_scale;
}

/**
 * @brief Set I2S TX PDM sigma-delta filter scaling
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param sig_scale I2S TX PDM signal scaling before transmit to the filter
 */
static inline void i2s_ll_tx_set_pdm_sd_scale(i2s_dev_t *hw, i2s_pdm_sig_scale_t sig_scale)
{
    hw->pdm_conf.tx_sigmadelta_in_shift = sig_scale;
}

/**
 * @brief Set the PDM TX over sampling ratio
 *
 * @param hw  Peripheral I2S hardware instance address.
 * @param ovr Over sampling ratio
 */
static inline void i2s_ll_tx_set_pdm_over_sample_ratio(i2s_dev_t *hw, uint32_t ovr)
{
    hw->pdm_conf.tx_sinc_osr2 = ovr;
}

/**
 * @brief Configure I2S TX PDM sample rate
 *        Fpdm = 64*Fpcm*fp/fs
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param fp The fp value of TX PDM filter module group0.
 * @param fs The fs value of TX PDM filter module group0.
 */
static inline void i2s_ll_tx_set_pdm_fpfs(i2s_dev_t *hw, uint32_t fp, uint32_t fs)
{
    hw->pdm_freq_conf.tx_pdm_fp = fp;
    hw->pdm_freq_conf.tx_pdm_fs = fs;
}

/**
 * @brief Get I2S TX PDM fp configuration paramater
 *
 * @param hw Peripheral I2S hardware instance address.
 * @return
 *        - fp configuration paramater
 */
static inline uint32_t i2s_ll_tx_get_pdm_fp(i2s_dev_t *hw)
{
    return hw->pdm_freq_conf.tx_pdm_fp;
}

/**
 * @brief Get I2S TX PDM fs configuration paramater
 *
 * @param hw Peripheral I2S hardware instance address.
 * @return
 *        - fs configuration paramater
 */
static inline uint32_t i2s_ll_tx_get_pdm_fs(i2s_dev_t *hw)
{
    return hw->pdm_freq_conf.tx_pdm_fs;
}




/****************************I2S ADC/DAC Configurations***********************************/
/**
 * @brief Enable I2S LCD mode
 * @note  Have to enable LCD mode to use build in ADC/DAC
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable LCD mode.
 */
static inline void i2s_ll_enable_lcd(i2s_dev_t *hw, bool enable)
{
    hw->conf2.lcd_en = enable;
}

/**
 * @brief Enable I2S camera mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable camera mode.
 */
static inline void i2s_ll_enable_camera(i2s_dev_t *hw, bool enable)
{
    hw->conf2.camera_en = enable;
}

/**
 * @brief Enable I2S build in ADC mode
 *
 * @param hw Peripheral I2S hardware instance address.
 * @param enable Set true to enable build in ADC
 */
static inline void i2s_ll_enable_builtin_adc(i2s_dev_t *hw, bool enable)
{
    hw->conf2.lcd_en = enable;
    hw->conf2.camera_en = 0;
    hw->conf.rx_right_first = 0;
    hw->conf.rx_msb_shift = 0;
    hw->conf.rx_mono = 0;
    hw->conf.rx_short_sync = 0;
    hw->fifo_conf.rx_fifo_mod = enable;
    hw->conf_chan.rx_chan_mod = enable;
}

/**
 * @brief Enable I2S build in DAC mode
 *
 * @param hw Peripheral I2S hardware instance address.
 *  * @param enable Set true to enable build in DAC
 */
static inline void i2s_ll_enable_builtin_dac(i2s_dev_t *hw, bool enable)
{
    hw->conf2.lcd_en = enable;
    hw->conf2.camera_en = 0;
    hw->conf.tx_right_first = enable;
    hw->conf.tx_msb_shift = 0;
    hw->conf.tx_short_sync = 0;
}

#ifdef __cplusplus
}
#endif