esp-idf/components/log/include/esp_log.h
2020-01-22 12:14:38 +08:00

350 lines
14 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_LOG_H__
#define __ESP_LOG_H__
#include <stdint.h>
#include <stdarg.h>
#include "sdkconfig.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/rom/ets_sys.h"
#elif CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/rom/ets_sys.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Log level
*
*/
typedef enum {
ESP_LOG_NONE, /*!< No log output */
ESP_LOG_ERROR, /*!< Critical errors, software module can not recover on its own */
ESP_LOG_WARN, /*!< Error conditions from which recovery measures have been taken */
ESP_LOG_INFO, /*!< Information messages which describe normal flow of events */
ESP_LOG_DEBUG, /*!< Extra information which is not necessary for normal use (values, pointers, sizes, etc). */
ESP_LOG_VERBOSE /*!< Bigger chunks of debugging information, or frequent messages which can potentially flood the output. */
} esp_log_level_t;
typedef int (*vprintf_like_t)(const char *, va_list);
/**
* @brief Set log level for given tag
*
* If logging for given component has already been enabled, changes previous setting.
*
* Note that this function can not raise log level above the level set using
* CONFIG_LOG_DEFAULT_LEVEL setting in menuconfig.
*
* To raise log level above the default one for a given file, define
* LOG_LOCAL_LEVEL to one of the ESP_LOG_* values, before including
* esp_log.h in this file.
*
* @param tag Tag of the log entries to enable. Must be a non-NULL zero terminated string.
* Value "*" resets log level for all tags to the given value.
*
* @param level Selects log level to enable. Only logs at this and lower verbosity
* levels will be shown.
*/
void esp_log_level_set(const char* tag, esp_log_level_t level);
/**
* @brief Set function used to output log entries
*
* By default, log output goes to UART0. This function can be used to redirect log
* output to some other destination, such as file or network. Returns the original
* log handler, which may be necessary to return output to the previous destination.
*
* @param func new Function used for output. Must have same signature as vprintf.
*
* @return func old Function used for output.
*/
vprintf_like_t esp_log_set_vprintf(vprintf_like_t func);
/**
* @brief Function which returns timestamp to be used in log output
*
* This function is used in expansion of ESP_LOGx macros.
* In the 2nd stage bootloader, and at early application startup stage
* this function uses CPU cycle counter as time source. Later when
* FreeRTOS scheduler start running, it switches to FreeRTOS tick count.
*
* For now, we ignore millisecond counter overflow.
*
* @return timestamp, in milliseconds
*/
uint32_t esp_log_timestamp(void);
/**
* @brief Function which returns system timestamp to be used in log output
*
* This function is used in expansion of ESP_LOGx macros to print
* the system time as "HH:MM:SS.sss". The system time is initialized to
* 0 on startup, this can be set to the correct time with an SNTP sync,
* or manually with standard POSIX time functions.
*
* Currently this will not get used in logging from binary blobs
* (i.e WiFi & Bluetooth libraries), these will still print the RTOS tick time.
*
* @return timestamp, in "HH:MM:SS.sss"
*/
char* esp_log_system_timestamp(void);
/**
* @brief Function which returns timestamp to be used in log output
*
* This function uses HW cycle counter and does not depend on OS,
* so it can be safely used after application crash.
*
* @return timestamp, in milliseconds
*/
uint32_t esp_log_early_timestamp(void);
/**
* @brief Write message into the log
*
* This function is not intended to be used directly. Instead, use one of
* ESP_LOGE, ESP_LOGW, ESP_LOGI, ESP_LOGD, ESP_LOGV macros.
*
* This function or these macros should not be used from an interrupt.
*/
void esp_log_write(esp_log_level_t level, const char* tag, const char* format, ...) __attribute__ ((format (printf, 3, 4)));
/** @cond */
#include "esp_log_internal.h"
#ifndef LOG_LOCAL_LEVEL
#ifndef BOOTLOADER_BUILD
#define LOG_LOCAL_LEVEL CONFIG_LOG_DEFAULT_LEVEL
#else
#define LOG_LOCAL_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL
#endif
#endif
/** @endcond */
/**
* @brief Log a buffer of hex bytes at specified level, separated into 16 bytes each line.
*
* @param tag description tag
* @param buffer Pointer to the buffer array
* @param buff_len length of buffer in bytes
* @param level level of the log
*
*/
#define ESP_LOG_BUFFER_HEX_LEVEL( tag, buffer, buff_len, level ) \
do {\
if ( LOG_LOCAL_LEVEL >= (level) ) { \
esp_log_buffer_hex_internal( tag, buffer, buff_len, level ); \
} \
} while(0)
/**
* @brief Log a buffer of characters at specified level, separated into 16 bytes each line. Buffer should contain only printable characters.
*
* @param tag description tag
* @param buffer Pointer to the buffer array
* @param buff_len length of buffer in bytes
* @param level level of the log
*
*/
#define ESP_LOG_BUFFER_CHAR_LEVEL( tag, buffer, buff_len, level ) \
do {\
if ( LOG_LOCAL_LEVEL >= (level) ) { \
esp_log_buffer_char_internal( tag, buffer, buff_len, level ); \
} \
} while(0)
/**
* @brief Dump a buffer to the log at specified level.
*
* The dump log shows just like the one below:
*
* W (195) log_example: 0x3ffb4280 45 53 50 33 32 20 69 73 20 67 72 65 61 74 2c 20 |ESP32 is great, |
* W (195) log_example: 0x3ffb4290 77 6f 72 6b 69 6e 67 20 61 6c 6f 6e 67 20 77 69 |working along wi|
* W (205) log_example: 0x3ffb42a0 74 68 20 74 68 65 20 49 44 46 2e 00 |th the IDF..|
*
* It is highly recommend to use terminals with over 102 text width.
*
* @param tag description tag
* @param buffer Pointer to the buffer array
* @param buff_len length of buffer in bytes
* @param level level of the log
*/
#define ESP_LOG_BUFFER_HEXDUMP( tag, buffer, buff_len, level ) \
do { \
if ( LOG_LOCAL_LEVEL >= (level) ) { \
esp_log_buffer_hexdump_internal( tag, buffer, buff_len, level); \
} \
} while(0)
/**
* @brief Log a buffer of hex bytes at Info level
*
* @param tag description tag
* @param buffer Pointer to the buffer array
* @param buff_len length of buffer in bytes
*
* @see ``esp_log_buffer_hex_level``
*
*/
#define ESP_LOG_BUFFER_HEX(tag, buffer, buff_len) \
do { \
if (LOG_LOCAL_LEVEL >= ESP_LOG_INFO) { \
ESP_LOG_BUFFER_HEX_LEVEL( tag, buffer, buff_len, ESP_LOG_INFO ); \
}\
} while(0)
/**
* @brief Log a buffer of characters at Info level. Buffer should contain only printable characters.
*
* @param tag description tag
* @param buffer Pointer to the buffer array
* @param buff_len length of buffer in bytes
*
* @see ``esp_log_buffer_char_level``
*
*/
#define ESP_LOG_BUFFER_CHAR(tag, buffer, buff_len) \
do { \
if (LOG_LOCAL_LEVEL >= ESP_LOG_INFO) { \
ESP_LOG_BUFFER_CHAR_LEVEL( tag, buffer, buff_len, ESP_LOG_INFO ); \
}\
} while(0)
/** @cond */
//to be back compatible
#define esp_log_buffer_hex ESP_LOG_BUFFER_HEX
#define esp_log_buffer_char ESP_LOG_BUFFER_CHAR
#if CONFIG_LOG_COLORS
#define LOG_COLOR_BLACK "30"
#define LOG_COLOR_RED "31"
#define LOG_COLOR_GREEN "32"
#define LOG_COLOR_BROWN "33"
#define LOG_COLOR_BLUE "34"
#define LOG_COLOR_PURPLE "35"
#define LOG_COLOR_CYAN "36"
#define LOG_COLOR(COLOR) "\033[0;" COLOR "m"
#define LOG_BOLD(COLOR) "\033[1;" COLOR "m"
#define LOG_RESET_COLOR "\033[0m"
#define LOG_COLOR_E LOG_COLOR(LOG_COLOR_RED)
#define LOG_COLOR_W LOG_COLOR(LOG_COLOR_BROWN)
#define LOG_COLOR_I LOG_COLOR(LOG_COLOR_GREEN)
#define LOG_COLOR_D
#define LOG_COLOR_V
#else //CONFIG_LOG_COLORS
#define LOG_COLOR_E
#define LOG_COLOR_W
#define LOG_COLOR_I
#define LOG_COLOR_D
#define LOG_COLOR_V
#define LOG_RESET_COLOR
#endif //CONFIG_LOG_COLORS
#define LOG_FORMAT(letter, format) LOG_COLOR_ ## letter #letter " (%d) %s: " format LOG_RESET_COLOR "\n"
#define LOG_SYSTEM_TIME_FORMAT(letter, format) LOG_COLOR_ ## letter #letter " (%s) %s: " format LOG_RESET_COLOR "\n"
/** @endcond */
/// macro to output logs in startup code, before heap allocator and syscalls have been initialized. log at ``ESP_LOG_ERROR`` level. @see ``printf``,``ESP_LOGE``
#define ESP_EARLY_LOGE( tag, format, ... ) ESP_LOG_EARLY_IMPL(tag, format, ESP_LOG_ERROR, E, ##__VA_ARGS__)
/// macro to output logs in startup code at ``ESP_LOG_WARN`` level. @see ``ESP_EARLY_LOGE``,``ESP_LOGE``, ``printf``
#define ESP_EARLY_LOGW( tag, format, ... ) ESP_LOG_EARLY_IMPL(tag, format, ESP_LOG_WARN, W, ##__VA_ARGS__)
/// macro to output logs in startup code at ``ESP_LOG_INFO`` level. @see ``ESP_EARLY_LOGE``,``ESP_LOGE``, ``printf``
#define ESP_EARLY_LOGI( tag, format, ... ) ESP_LOG_EARLY_IMPL(tag, format, ESP_LOG_INFO, I, ##__VA_ARGS__)
/// macro to output logs in startup code at ``ESP_LOG_DEBUG`` level. @see ``ESP_EARLY_LOGE``,``ESP_LOGE``, ``printf``
#define ESP_EARLY_LOGD( tag, format, ... ) ESP_LOG_EARLY_IMPL(tag, format, ESP_LOG_DEBUG, D, ##__VA_ARGS__)
/// macro to output logs in startup code at ``ESP_LOG_VERBOSE`` level. @see ``ESP_EARLY_LOGE``,``ESP_LOGE``, ``printf``
#define ESP_EARLY_LOGV( tag, format, ... ) ESP_LOG_EARLY_IMPL(tag, format, ESP_LOG_VERBOSE, V, ##__VA_ARGS__)
#define ESP_LOG_EARLY_IMPL(tag, format, log_level, log_tag_letter, ...) do { \
if (LOG_LOCAL_LEVEL >= log_level) { \
ets_printf(LOG_FORMAT(log_tag_letter, format), esp_log_timestamp(), tag, ##__VA_ARGS__); \
}} while(0)
#ifndef BOOTLOADER_BUILD
#define ESP_LOGE( tag, format, ... ) ESP_LOG_LEVEL_LOCAL(ESP_LOG_ERROR, tag, format, ##__VA_ARGS__)
#define ESP_LOGW( tag, format, ... ) ESP_LOG_LEVEL_LOCAL(ESP_LOG_WARN, tag, format, ##__VA_ARGS__)
#define ESP_LOGI( tag, format, ... ) ESP_LOG_LEVEL_LOCAL(ESP_LOG_INFO, tag, format, ##__VA_ARGS__)
#define ESP_LOGD( tag, format, ... ) ESP_LOG_LEVEL_LOCAL(ESP_LOG_DEBUG, tag, format, ##__VA_ARGS__)
#define ESP_LOGV( tag, format, ... ) ESP_LOG_LEVEL_LOCAL(ESP_LOG_VERBOSE, tag, format, ##__VA_ARGS__)
#else
/**
* macro to output logs at ESP_LOG_ERROR level.
*
* @param tag tag of the log, which can be used to change the log level by ``esp_log_level_set`` at runtime.
*
* @see ``printf``
*/
#define ESP_LOGE( tag, format, ... ) ESP_EARLY_LOGE(tag, format, ##__VA_ARGS__)
/// macro to output logs at ``ESP_LOG_WARN`` level. @see ``ESP_LOGE``
#define ESP_LOGW( tag, format, ... ) ESP_EARLY_LOGW(tag, format, ##__VA_ARGS__)
/// macro to output logs at ``ESP_LOG_INFO`` level. @see ``ESP_LOGE``
#define ESP_LOGI( tag, format, ... ) ESP_EARLY_LOGI(tag, format, ##__VA_ARGS__)
/// macro to output logs at ``ESP_LOG_DEBUG`` level. @see ``ESP_LOGE``
#define ESP_LOGD( tag, format, ... ) ESP_EARLY_LOGD(tag, format, ##__VA_ARGS__)
/// macro to output logs at ``ESP_LOG_VERBOSE`` level. @see ``ESP_LOGE``
#define ESP_LOGV( tag, format, ... ) ESP_EARLY_LOGV(tag, format, ##__VA_ARGS__)
#endif // BOOTLOADER_BUILD
/** runtime macro to output logs at a specified level.
*
* @param tag tag of the log, which can be used to change the log level by ``esp_log_level_set`` at runtime.
* @param level level of the output log.
* @param format format of the output log. see ``printf``
* @param ... variables to be replaced into the log. see ``printf``
*
* @see ``printf``
*/
#if CONFIG_LOG_TIMESTAMP_SOURCE_RTOS
#define ESP_LOG_LEVEL(level, tag, format, ...) do { \
if (level==ESP_LOG_ERROR ) { esp_log_write(ESP_LOG_ERROR, tag, LOG_FORMAT(E, format), esp_log_timestamp(), tag, ##__VA_ARGS__); } \
else if (level==ESP_LOG_WARN ) { esp_log_write(ESP_LOG_WARN, tag, LOG_FORMAT(W, format), esp_log_timestamp(), tag, ##__VA_ARGS__); } \
else if (level==ESP_LOG_DEBUG ) { esp_log_write(ESP_LOG_DEBUG, tag, LOG_FORMAT(D, format), esp_log_timestamp(), tag, ##__VA_ARGS__); } \
else if (level==ESP_LOG_VERBOSE ) { esp_log_write(ESP_LOG_VERBOSE, tag, LOG_FORMAT(V, format), esp_log_timestamp(), tag, ##__VA_ARGS__); } \
else { esp_log_write(ESP_LOG_INFO, tag, LOG_FORMAT(I, format), esp_log_timestamp(), tag, ##__VA_ARGS__); } \
} while(0)
#elif CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM
#define ESP_LOG_LEVEL(level, tag, format, ...) do { \
if (level==ESP_LOG_ERROR ) { esp_log_write(ESP_LOG_ERROR, tag, LOG_SYSTEM_TIME_FORMAT(E, format), esp_log_system_timestamp(), tag, ##__VA_ARGS__); } \
else if (level==ESP_LOG_WARN ) { esp_log_write(ESP_LOG_WARN, tag, LOG_SYSTEM_TIME_FORMAT(W, format), esp_log_system_timestamp(), tag, ##__VA_ARGS__); } \
else if (level==ESP_LOG_DEBUG ) { esp_log_write(ESP_LOG_DEBUG, tag, LOG_SYSTEM_TIME_FORMAT(D, format), esp_log_system_timestamp(), tag, ##__VA_ARGS__); } \
else if (level==ESP_LOG_VERBOSE ) { esp_log_write(ESP_LOG_VERBOSE, tag, LOG_SYSTEM_TIME_FORMAT(V, format), esp_log_system_timestamp(), tag, ##__VA_ARGS__); } \
else { esp_log_write(ESP_LOG_INFO, tag, LOG_SYSTEM_TIME_FORMAT(I, format), esp_log_system_timestamp(), tag, ##__VA_ARGS__); } \
} while(0)
#endif //CONFIG_LOG_TIMESTAMP_SOURCE_xxx
/** runtime macro to output logs at a specified level. Also check the level with ``LOG_LOCAL_LEVEL``.
*
* @see ``printf``, ``ESP_LOG_LEVEL``
*/
#define ESP_LOG_LEVEL_LOCAL(level, tag, format, ...) do { \
if ( LOG_LOCAL_LEVEL >= level ) ESP_LOG_LEVEL(level, tag, format, ##__VA_ARGS__); \
} while(0)
#ifdef __cplusplus
}
#endif
#endif /* __ESP_LOG_H__ */