alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
deaad431f4
esp-idf/components/esp_common/Kconfig
Renz Bagaporo deaad431f4 esp_common: move task, int wdt
2021-02-24 12:16:37 +08:00

216 lines
9.1 KiB
Plaintext
Raw Blame History

menu "Common ESP-related"
config ESP_ERR_TO_NAME_LOOKUP
bool "Enable lookup of error code strings"
default "y"
help
Functions esp_err_to_name() and esp_err_to_name_r() return string representations of error codes from a
pre-generated lookup table. This option can be used to turn off the use of the look-up table in order to
save memory but this comes at the price of sacrificing distinguishable (meaningful) output string
representations.
config ESP_SYSTEM_EVENT_QUEUE_SIZE
int "System event queue size"
default 32
help
Config system event queue size in different application.
config ESP_SYSTEM_EVENT_TASK_STACK_SIZE
int "Event loop task stack size"
default 2304
help
Config system event task stack size in different application.
config ESP_MAIN_TASK_STACK_SIZE
int "Main task stack size"
default 3584
help
Configure the "main task" stack size. This is the stack of the task
which calls app_main(). If app_main() returns then this task is deleted
and its stack memory is freed.
config ESP_IPC_TASK_STACK_SIZE
int "Inter-Processor Call (IPC) task stack size"
range 512 65536 if !APPTRACE_ENABLE
range 2048 65536 if APPTRACE_ENABLE
default 2048 if APPTRACE_ENABLE
default 1024
help
Configure the IPC tasks stack size. One IPC task runs on each core
(in dual core mode), and allows for cross-core function calls.
See IPC documentation for more details.
The default stack size should be enough for most common use cases.
It can be shrunk if you are sure that you do not use any custom
IPC functionality.
config ESP_IPC_USES_CALLERS_PRIORITY
bool "IPC runs at caller's priority"
default y
depends on !FREERTOS_UNICORE
help
If this option is not enabled then the IPC task will keep behavior
same as prior to that of ESP-IDF v4.0, and hence IPC task will run
at (configMAX_PRIORITIES - 1) priority.
config ESP_MINIMAL_SHARED_STACK_SIZE
int "Minimal allowed size for shared stack"
default 2048
help
Minimal value of size, in bytes, accepted to execute a expression
with shared stack.
choice ESP_CONSOLE_UART
prompt "Channel for console output"
default ESP_CONSOLE_UART_DEFAULT
help
Select where to send console output (through stdout and stderr).
- Default is to use UART0 on pre-defined GPIOs.
- If "Custom" is selected, UART0 or UART1 can be chosen,
and any pins can be selected.
- If "None" is selected, there will be no console output on any UART, except
for initial output from ROM bootloader. This ROM output can be suppressed by
GPIO strapping or EFUSE, refer to chip datasheet for details.
- On chips with USB peripheral, "USB CDC" option redirects output to the
CDC port. This option uses the CDC driver in the chip ROM.
This option is incompatible with TinyUSB stack.
config ESP_CONSOLE_UART_DEFAULT
bool "Default: UART0"
config ESP_CONSOLE_USB_CDC
bool "USB CDC"
# The naming is confusing: USB_ENABLED means that TinyUSB driver is enabled, not USB in general.
# && !USB_ENABLED is because the ROM CDC driver is currently incompatible with TinyUSB.
depends on IDF_TARGET_ESP32S2 && !USB_ENABLED
config ESP_CONSOLE_UART_CUSTOM
bool "Custom UART"
config ESP_CONSOLE_NONE
bool "None"
endchoice
# Internal option, indicates that console UART is used (and not USB, for example)
config ESP_CONSOLE_UART
bool
default y if ESP_CONSOLE_UART_DEFAULT || ESP_CONSOLE_UART_CUSTOM
config ESP_CONSOLE_MULTIPLE_UART
bool
default y if !IDF_TARGET_ESP32C3
choice ESP_CONSOLE_UART_NUM
prompt "UART peripheral to use for console output (0-1)"
depends on ESP_CONSOLE_UART_CUSTOM && ESP_CONSOLE_MULTIPLE_UART
default ESP_CONSOLE_UART_CUSTOM_NUM_0
help
This UART peripheral is used for console output from the ESP-IDF Bootloader and the app.
If the configuration is different in the Bootloader binary compared to the app binary, UART
is reconfigured after the bootloader exits and the app starts.
Due to an ESP32 ROM bug, UART2 is not supported for console output
via esp_rom_printf.
config ESP_CONSOLE_UART_CUSTOM_NUM_0
bool "UART0"
config ESP_CONSOLE_UART_CUSTOM_NUM_1
bool "UART1"
endchoice
config ESP_CONSOLE_UART_NUM
int
default 0 if ESP_CONSOLE_UART_DEFAULT
default 0 if !ESP_CONSOLE_MULTIPLE_UART
default 0 if ESP_CONSOLE_UART_CUSTOM_NUM_0
default 1 if ESP_CONSOLE_UART_CUSTOM_NUM_1
default -1 if !ESP_CONSOLE_UART
config ESP_CONSOLE_UART_TX_GPIO
int "UART TX on GPIO#"
depends on ESP_CONSOLE_UART_CUSTOM
range 0 46
default 1 if IDF_TARGET_ESP32
default 21 if IDF_TARGET_ESP32C3
default 43
help
This GPIO is used for console UART TX output in the ESP-IDF Bootloader and the app (including
boot log output and default standard output and standard error of the app).
If the configuration is different in the Bootloader binary compared to the app binary, UART
is reconfigured after the bootloader exits and the app starts.
config ESP_CONSOLE_UART_RX_GPIO
int "UART RX on GPIO#"
depends on ESP_CONSOLE_UART_CUSTOM
range 0 46
default 3 if IDF_TARGET_ESP32
default 20 if IDF_TARGET_ESP32C3
default 44
help
This GPIO is used for UART RX input in the ESP-IDF Bootloader and the app (including
default default standard input of the app).
Note: The default ESP-IDF Bootloader configures this pin but doesn't read anything from the UART.
If the configuration is different in the Bootloader binary compared to the app binary, UART
is reconfigured after the bootloader exits and the app starts.
config ESP_CONSOLE_UART_BAUDRATE
int
prompt "UART console baud rate" if ESP_CONSOLE_UART_CUSTOM
depends on ESP_CONSOLE_UART
default 115200
range 1200 4000000 if !PM_ENABLE
range 1200 1000000 if PM_ENABLE
help
This baud rate is used by both the ESP-IDF Bootloader and the app (including
boot log output and default standard input/output/error of the app).
The app's maximum baud rate depends on the UART clock source. If Power Management is disabled,
the UART clock source is the APB clock and all baud rates in the available range will be sufficiently
accurate. If Power Management is enabled, REF_TICK clock source is used so the baud rate is divided
from 1MHz. Baud rates above 1Mbps are not possible and values between 500Kbps and 1Mbps may not be
accurate.
If the configuration is different in the Bootloader binary compared to the app binary, UART
is reconfigured after the bootloader exits and the app starts.
config ESP_CONSOLE_USB_CDC_RX_BUF_SIZE
int "Size of USB CDC RX buffer"
depends on ESP_CONSOLE_USB_CDC
default 64
range 4 16384
help
Set the size of USB CDC RX buffer. Increase the buffer size if your application
is often receiving data over USB CDC.
config ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF
bool "Enable esp_rom_printf / ESP_EARLY_LOG via USB CDC"
depends on ESP_CONSOLE_USB_CDC
default n
help
If enabled, esp_rom_printf and ESP_EARLY_LOG output will also be sent over USB CDC.
Disabling this option saves about 1kB or RAM.
config ESP_PANIC_HANDLER_IRAM
bool "Place panic handler code in IRAM"
default n
help
If this option is disabled (default), the panic handler code is placed in flash not IRAM.
This means that if ESP-IDF crashes while flash cache is disabled, the panic handler will
automatically re-enable flash cache before running GDB Stub or Core Dump. This adds some minor
risk, if the flash cache status is also corrupted during the crash.
If this option is enabled, the panic handler code is placed in IRAM. This allows the panic
handler to run without needing to re-enable cache first. This may be necessary to debug some
complex issues with crashes while flash cache is disabled (for example, when writing to
SPI flash.)
config ESP_ALLOW_BSS_SEG_EXTERNAL_MEMORY
# Invisible option that is set by SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY, but
# exists even if SPIRAM is not supported
bool
endmenu # Common ESP-related
Reference in New Issue View Git Blame Copy Permalink