mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
41e58bc419
New unit tests added ------------------------ **Local:** Local test uses the GPIO matrix to connect the master and the slave on the same board. When the master needs the iomux, the master uses the GPIOs of its own, the slave connect to the pins by GPIO matrix; When the slave needs the iomux, the slave uses the GPIOs of its own, the master connects to the pins by GPIO matrix. - Provide a new unit test which performs freq scanning in mode 0. It scans frequency of 1M, 8M, 9M and all frequency steps up to the maximum frequency allowed. **M & S**: Master & slave tests performs the test with two boards. The master and slave use iomux or gpio matrix according to the config. - Provide a new unit test which performs freq scanning in mode 0. It scans frequency of 1M, 8M, 9M and all frequency steps up to the maximum frequency allowed. - Provide a new unit test which performs mode test with significant frequencies. It tests mode 0,1,2,3 with low frequency, and the maximum frequency allowed.
192 lines
6.8 KiB
C
192 lines
6.8 KiB
C
#include "test/test_common_spi.h"
|
|
#include "driver/spi_slave.h"
|
|
#include "esp_log.h"
|
|
|
|
int test_freq_default[]=TEST_FREQ_DEFAULT();
|
|
|
|
const char MASTER_TAG[] = "test_master";
|
|
const char SLAVE_TAG[] = "test_slave";
|
|
|
|
DRAM_ATTR uint8_t spitest_master_send[] = {
|
|
0x93, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0xaa, 0xcc, 0xff, 0xee, 0x55, 0x77, 0x88, 0x43,
|
|
0x74,
|
|
0x93, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0xaa, 0xcc, 0xff, 0xee, 0x55, 0x77, 0x88, 0x43,
|
|
0x74,
|
|
0x93, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0xaa, 0xcc, 0xff, 0xee, 0x55, 0x77, 0x88, 0x43,
|
|
0x74,
|
|
};
|
|
DRAM_ATTR uint8_t spitest_slave_send[] = {
|
|
0xaa, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10, 0x13, 0x57, 0x9b, 0xdf, 0x24, 0x68, 0xac, 0xe0,
|
|
0xda,
|
|
0xaa, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10, 0x13, 0x57, 0x9b, 0xdf, 0x24, 0x68, 0xac, 0xe0,
|
|
0xda,
|
|
0xaa, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10, 0x13, 0x57, 0x9b, 0xdf, 0x24, 0x68, 0xac, 0xe0,
|
|
0xda,
|
|
};
|
|
|
|
void spitest_def_param(void* arg)
|
|
{
|
|
spitest_param_set_t *param_set=(spitest_param_set_t*)arg;
|
|
param_set->test_size = 8;
|
|
if (param_set->freq_list==NULL) param_set->freq_list = test_freq_default;
|
|
}
|
|
|
|
/**********************************************************************************
|
|
* functions for slave task
|
|
*********************************************************************************/
|
|
esp_err_t init_slave_context(spi_slave_task_context_t *context)
|
|
{
|
|
context->data_to_send = xQueueCreate( 16, sizeof( slave_txdata_t ));
|
|
if ( context->data_to_send == NULL ) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
context->data_received = xRingbufferCreate( 1024, RINGBUF_TYPE_NOSPLIT );
|
|
if ( context->data_received == NULL ) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
context->spi=VSPI_HOST;
|
|
return ESP_OK;
|
|
}
|
|
|
|
void deinit_slave_context(spi_slave_task_context_t *context)
|
|
{
|
|
TEST_ASSERT( context->data_to_send != NULL );
|
|
vQueueDelete( context->data_to_send );
|
|
context->data_to_send = NULL;
|
|
TEST_ASSERT( context->data_received != NULL );
|
|
vRingbufferDelete( context->data_received );
|
|
context->data_received = NULL;
|
|
}
|
|
|
|
/* The task requires a queue and a ringbuf, which should be initialized before task starts.
|
|
Send ``slave_txdata_t`` to the queue to make the task send data;
|
|
the task returns data got to the ringbuf, which should have sufficient size.
|
|
*/
|
|
void spitest_slave_task(void* arg)
|
|
{
|
|
spi_slave_task_context_t* context = (spi_slave_task_context_t*) arg;
|
|
QueueHandle_t queue = context->data_to_send;
|
|
RingbufHandle_t ringbuf = context->data_received;
|
|
uint8_t recvbuf[320+8];
|
|
slave_txdata_t txdata;
|
|
|
|
ESP_LOGI( SLAVE_TAG, "slave up" );
|
|
//never quit, but blocked by the queue, waiting to be killed, when no more send from main task.
|
|
while( 1 ) {
|
|
BaseType_t ret = xQueueReceive( queue, &txdata, portMAX_DELAY );
|
|
assert(ret);
|
|
|
|
spi_slave_transaction_t t = {};
|
|
t.length = txdata.len;
|
|
t.tx_buffer = txdata.start;
|
|
t.rx_buffer = recvbuf+8;
|
|
//loop until trans_len != 0 to skip glitches
|
|
do {
|
|
TEST_ESP_OK( spi_slave_transmit( context->spi, &t, portMAX_DELAY ) );
|
|
} while ( t.trans_len <= 2 );
|
|
memcpy(recvbuf, &t.trans_len, sizeof(uint32_t));
|
|
*(uint8_t**)(recvbuf+4) = (uint8_t*)txdata.start;
|
|
ESP_LOGI( SLAVE_TAG, "received: %d", t.trans_len );
|
|
xRingbufferSend( ringbuf, recvbuf, 8+(t.trans_len+7)/8, portMAX_DELAY );
|
|
}
|
|
}
|
|
|
|
void slave_pull_up(const spi_bus_config_t* cfg, int spics_io_num)
|
|
{
|
|
gpio_set_pull_mode(cfg->mosi_io_num, GPIO_PULLUP_ONLY);
|
|
gpio_set_pull_mode(cfg->sclk_io_num, GPIO_PULLUP_ONLY);
|
|
gpio_set_pull_mode(spics_io_num, GPIO_PULLUP_ONLY);
|
|
}
|
|
|
|
/**********************************************************************************
|
|
* functions for slave task
|
|
*********************************************************************************/
|
|
|
|
static int test_len[] = {1, 3, 5, 7, 9, 11, 33, 64};
|
|
|
|
void spitest_init_transactions(const spitest_param_set_t *cfg, spitest_context_t* context)
|
|
{
|
|
spi_transaction_t* trans = context->master_trans;
|
|
uint8_t *rx_buf_ptr = context->master_rxbuf;
|
|
const spi_dup_t dup = cfg->dup;
|
|
|
|
for (int i = 0; i < cfg->test_size; i++) {
|
|
const void* tx_buffer = spitest_master_send + i%8;
|
|
int length = 8*test_len[i];
|
|
if (cfg->length_aligned) length = (length+31)&(~31);
|
|
|
|
if (dup == HALF_DUPLEX_MISO) {
|
|
trans[i] = (spi_transaction_t) {
|
|
.rx_buffer = rx_buf_ptr,
|
|
.rxlength = length,
|
|
};
|
|
} else if (dup == HALF_DUPLEX_MOSI) {
|
|
trans[i] = (spi_transaction_t) {
|
|
.tx_buffer = tx_buffer,
|
|
.length = length,
|
|
};
|
|
} else {
|
|
trans[i] = (spi_transaction_t) {
|
|
.tx_buffer = tx_buffer,
|
|
.length = length,
|
|
.rx_buffer = rx_buf_ptr,
|
|
};
|
|
}
|
|
rx_buf_ptr = (uint8_t*)( (uint32_t)(rx_buf_ptr + (length+7)/8 + 3) & (~3));
|
|
|
|
const void* slave_tx = spitest_slave_send + (cfg->slave_unaligned_addr? i%3: (i%3)*4);
|
|
//prepare slave tx data
|
|
context->slave_trans[i] = (slave_txdata_t) {
|
|
.start = slave_tx,
|
|
.len = 512,
|
|
};
|
|
if (cfg->slave_dma_chan != 0) context->slave_trans[i].len = 1024;
|
|
}
|
|
}
|
|
|
|
void spitest_master_print_data(spi_transaction_t *t, int rxlength)
|
|
{
|
|
if (t->tx_buffer) ESP_LOG_BUFFER_HEX( "master tx", t->tx_buffer, t->length/8 );
|
|
if (t->rx_buffer) ESP_LOG_BUFFER_HEX( "master rx", t->rx_buffer, rxlength/8 );
|
|
}
|
|
|
|
void spitest_slave_print_data(slave_rxdata_t *t, bool print_rxdata)
|
|
{
|
|
int rcv_len = (t->len+7)/8;
|
|
ESP_LOGI(SLAVE_TAG, "trans_len: %d", t->len);
|
|
ESP_LOG_BUFFER_HEX("slave tx", t->tx_start, rcv_len);
|
|
if (print_rxdata) ESP_LOG_BUFFER_HEX("slave rx", t->data, rcv_len);
|
|
}
|
|
|
|
esp_err_t spitest_check_data(int len, spi_transaction_t *master_t, slave_rxdata_t *slave_t, bool check_master_data, bool check_slave_len, bool check_slave_data)
|
|
{
|
|
//currently the rcv_len can be in range of [t->length-1, t->length+3]
|
|
if (check_slave_len) {
|
|
uint32_t rcv_len = slave_t->len;
|
|
TEST_ASSERT(rcv_len >= len - 1 && rcv_len <= len + 4);
|
|
}
|
|
|
|
//if (dup!=HALF_DUPLEX_MOSI) {
|
|
if (check_master_data) {
|
|
TEST_ASSERT_EQUAL_HEX8_ARRAY(slave_t->tx_start, master_t->rx_buffer, (len + 7) / 8);
|
|
}
|
|
|
|
//if (dup!=HALF_DUPLEX_MISO) {
|
|
if (check_slave_data) {
|
|
TEST_ASSERT_EQUAL_HEX8_ARRAY(master_t->tx_buffer, slave_t->data, (len + 7) / 8);
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
void master_free_device_bus(spi_device_handle_t spi)
|
|
{
|
|
TEST_ESP_OK( spi_bus_remove_device(spi) );
|
|
TEST_ESP_OK( spi_bus_free(TEST_SPI_HOST) );
|
|
}
|
|
|
|
void spitest_gpio_output_sel(uint32_t gpio_num, int func, uint32_t signal_idx)
|
|
{
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], func);
|
|
GPIO.func_out_sel_cfg[gpio_num].func_sel=signal_idx;
|
|
} |