alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-21 06:56:11 -04:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
dd4f27801f
esp-idf/components/driver/sdmmc_host.c
morris 16677b0d3c global: make periph enable/disable APIs private 
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
2021-11-08 10:37:47 +08:00

724 lines
23 KiB
C
Raw Blame History

/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdbool.h>
#include <stddef.h>
#include <sys/param.h>
#include "esp_log.h"
#include "esp_intr_alloc.h"
#include "soc/soc_caps.h"
#include "soc/soc_pins.h"
#include "soc/gpio_periph.h"
#include "esp_rom_gpio.h"
#include "esp_rom_sys.h"
#include "driver/gpio.h"
#include "driver/sdmmc_host.h"
#include "esp_private/periph_ctrl.h"
#include "sdmmc_private.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "soc/sdmmc_periph.h"
#include "hal/gpio_hal.h"
#define SDMMC_EVENT_QUEUE_LENGTH 32
static void sdmmc_isr(void* arg);
static void sdmmc_host_dma_init(void);
static const char* TAG = "sdmmc_periph";
static intr_handle_t s_intr_handle;
static QueueHandle_t s_event_queue;
static SemaphoreHandle_t s_io_intr_event;
static size_t s_slot_width[2] = {1, 1};
/* The following definitions are used to simplify GPIO configuration in the driver,
* whether IOMUX or GPIO Matrix is used by the chip.
* Two simple "APIs" are provided to the driver code:
* - configure_pin(name, slot, mode): Configures signal "name" for the given slot and mode.
* - GPIO_NUM(slot, name): Returns the GPIO number of signal "name" for the given slot.
*
* To make this work, configure_pin is defined as a macro that picks the parameters required
* for configuring GPIO matrix or IOMUX from relevant arrays, and passes them to either of
* configure_pin_gpio_matrix, configure_pin_iomux functions.
* Likewise, GPIO_NUM is a macro that picks the pin number from one of the two structures.
*
* Macros are used rather than inline functions to look up members of different structures
* with same names. E.g. the number of pin d3 is obtained either from .d3 member of
* sdmmc_slot_gpio_num array (for IOMUX) or from .d3 member of s_sdmmc_slot_gpio_num array
* (for GPIO matrix).
*/
#ifdef SOC_SDMMC_USE_GPIO_MATRIX
static void configure_pin_gpio_matrix(uint8_t gpio_num, uint8_t gpio_matrix_sig, gpio_mode_t mode, const char* name);
#define configure_pin(name, slot, mode) \
configure_pin_gpio_matrix(s_sdmmc_slot_gpio_num[slot].name, sdmmc_slot_gpio_sig[slot].name, mode, #name)
static sdmmc_slot_io_info_t s_sdmmc_slot_gpio_num[SOC_SDMMC_NUM_SLOTS];
#define GPIO_NUM(slot, name) s_sdmmc_slot_gpio_num[slot].name
#elif SOC_SDMMC_USE_IOMUX
static void configure_pin_iomux(uint8_t gpio_num);
#define configure_pin(name, slot, mode) configure_pin_iomux(sdmmc_slot_gpio_num[slot].name)
#define GPIO_NUM(slot, name) sdmmc_slot_gpio_num[slot].name
#endif // SOC_SDMMC_USE_GPIO_MATRIX
static esp_err_t sdmmc_host_pullup_en_internal(int slot, int width);
void sdmmc_host_reset(void)
{
// Set reset bits
SDMMC.ctrl.controller_reset = 1;
SDMMC.ctrl.dma_reset = 1;
SDMMC.ctrl.fifo_reset = 1;
// Wait for the reset bits to be cleared by hardware
while (SDMMC.ctrl.controller_reset || SDMMC.ctrl.fifo_reset || SDMMC.ctrl.dma_reset) {
;
}
}
/* We have two clock divider stages:
* - one is the clock generator which drives SDMMC peripheral,
* it can be configured using SDMMC.clock register. It can generate
* frequencies 160MHz/(N + 1), where 0 < N < 16, I.e. from 10 to 80 MHz.
* - 4 clock dividers inside SDMMC peripheral, which can divide clock
* from the first stage by 2 * M, where 0 < M < 255
* (they can also be bypassed).
*
* For cards which aren't UHS-1 or UHS-2 cards, which we don't support,
* maximum bus frequency in high speed (HS) mode is 50 MHz.
* Note: for non-UHS-1 cards, HS mode is optional.
* Default speed (DS) mode is mandatory, it works up to 25 MHz.
* Whether the card supports HS or not can be determined using TRAN_SPEED
* field of card's CSD register.
*
* 50 MHz can not be obtained exactly, closest we can get is 53 MHz.
*
* The first stage divider is set to the highest possible value for the given
* frequency, and the the second stage dividers are used if division factor
* is >16.
*
* Of the second stage dividers, div0 is used for card 0, and div1 is used
* for card 1.
*/
static void sdmmc_host_set_clk_div(int div)
{
// Set frequency to 160MHz / div
// div = p + 1
// duty cycle = (h + 1)/(p + 1) (should be = 1/2)
assert (div > 1 && div <= 16);
int p = div - 1;
int h = div / 2 - 1;
SDMMC.clock.div_factor_p = p;
SDMMC.clock.div_factor_h = h;
SDMMC.clock.div_factor_m = p;
// Make sure 160 MHz source clock is used
#if SOC_SDMMC_SUPPORT_XTAL_CLOCK
SDMMC.clock.clk_sel = 1;
#endif
#if SOC_SDMMC_USE_GPIO_MATRIX
// 90 degree phase on input and output clocks
const int inout_clock_phase = 1;
#else
// 180 degree phase on input and output clocks
const int inout_clock_phase = 4;
#endif
// Set phases for in/out clocks
SDMMC.clock.phase_dout = inout_clock_phase;
SDMMC.clock.phase_din = inout_clock_phase;
SDMMC.clock.phase_core = 0;
// Wait for the clock to propagate
esp_rom_delay_us(10);
}
static void sdmmc_host_input_clk_disable(void)
{
SDMMC.clock.val = 0;
}
static void sdmmc_host_clock_update_command(int slot)
{
// Clock update command (not a real command; just updates CIU registers)
sdmmc_hw_cmd_t cmd_val = {
.card_num = slot,
.update_clk_reg = 1,
.wait_complete = 1
};
bool repeat = true;
while(repeat) {
sdmmc_host_start_command(slot, cmd_val, 0);
while (true) {
// Sending clock update command to the CIU can generate HLE error.
// According to the manual, this is okay and we must retry the command.
if (SDMMC.rintsts.hle) {
SDMMC.rintsts.hle = 1;
repeat = true;
break;
}
// When the command is accepted by CIU, start_command bit will be
// cleared in SDMMC.cmd register.
if (SDMMC.cmd.start_command == 0) {
repeat = false;
break;
}
}
}
}
esp_err_t sdmmc_host_set_card_clk(int slot, uint32_t freq_khz)
{
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
const int clk40m = 40000;
// Disable clock first
SDMMC.clkena.cclk_enable &= ~BIT(slot);
sdmmc_host_clock_update_command(slot);
int host_div = 0; /* clock divider of the host (SDMMC.clock) */
int card_div = 0; /* 1/2 of card clock divider (SDMMC.clkdiv) */
// Calculate new dividers
if (freq_khz >= SDMMC_FREQ_HIGHSPEED) {
host_div = 4; // 160 MHz / 4 = 40 MHz
card_div = 0;
} else if (freq_khz == SDMMC_FREQ_DEFAULT) {
host_div = 8; // 160 MHz / 8 = 20 MHz
card_div = 0;
} else if (freq_khz == SDMMC_FREQ_PROBING) {
host_div = 10; // 160 MHz / 10 / (20 * 2) = 400 kHz
card_div = 20;
} else {
host_div = 2;
card_div = (clk40m + freq_khz * 2 - 1) / (freq_khz * 2); // round up
}
ESP_LOGD(TAG, "slot=%d host_div=%d card_div=%d freq=%dkHz",
slot, host_div, card_div,
2 * APB_CLK_FREQ / host_div / ((card_div == 0) ? 1 : card_div * 2) / 1000);
// Program CLKDIV and CLKSRC, send them to the CIU
switch(slot) {
case 0:
SDMMC.clksrc.card0 = 0;
SDMMC.clkdiv.div0 = card_div;
break;
case 1:
SDMMC.clksrc.card1 = 1;
SDMMC.clkdiv.div1 = card_div;
break;
}
sdmmc_host_set_clk_div(host_div);
sdmmc_host_clock_update_command(slot);
// Re-enable clocks
SDMMC.clkena.cclk_enable |= BIT(slot);
SDMMC.clkena.cclk_low_power |= BIT(slot);
sdmmc_host_clock_update_command(slot);
// set data timeout
const uint32_t data_timeout_ms = 100;
uint32_t data_timeout_cycles = data_timeout_ms * freq_khz;
const uint32_t data_timeout_cycles_max = 0xffffff;
if (data_timeout_cycles > data_timeout_cycles_max) {
data_timeout_cycles = data_timeout_cycles_max;
}
SDMMC.tmout.data = data_timeout_cycles;
// always set response timeout to highest value, it's small enough anyway
SDMMC.tmout.response = 255;
return ESP_OK;
}
esp_err_t sdmmc_host_start_command(int slot, sdmmc_hw_cmd_t cmd, uint32_t arg) {
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if ((SDMMC.cdetect.cards & BIT(slot)) != 0) {
return ESP_ERR_NOT_FOUND;
}
if (cmd.data_expected && cmd.rw && (SDMMC.wrtprt.cards & BIT(slot)) != 0) {
return ESP_ERR_INVALID_STATE;
}
while (SDMMC.cmd.start_command == 1) {
;
}
SDMMC.cmdarg = arg;
cmd.card_num = slot;
cmd.start_command = 1;
SDMMC.cmd = cmd;
return ESP_OK;
}
esp_err_t sdmmc_host_init(void)
{
if (s_intr_handle) {
return ESP_ERR_INVALID_STATE;
}
periph_module_reset(PERIPH_SDMMC_MODULE);
periph_module_enable(PERIPH_SDMMC_MODULE);
// Enable clock to peripheral. Use smallest divider first.
sdmmc_host_set_clk_div(2);
// Reset
sdmmc_host_reset();
ESP_LOGD(TAG, "peripheral version %x, hardware config %08x", SDMMC.verid, SDMMC.hcon);
// Clear interrupt status and set interrupt mask to known state
SDMMC.rintsts.val = 0xffffffff;
SDMMC.intmask.val = 0;
SDMMC.ctrl.int_enable = 0;
// Allocate event queue
s_event_queue = xQueueCreate(SDMMC_EVENT_QUEUE_LENGTH, sizeof(sdmmc_event_t));
if (!s_event_queue) {
return ESP_ERR_NO_MEM;
}
s_io_intr_event = xSemaphoreCreateBinary();
if (!s_io_intr_event) {
vQueueDelete(s_event_queue);
s_event_queue = NULL;
return ESP_ERR_NO_MEM;
}
// Attach interrupt handler
esp_err_t ret = esp_intr_alloc(ETS_SDIO_HOST_INTR_SOURCE, 0, &sdmmc_isr, s_event_queue, &s_intr_handle);
if (ret != ESP_OK) {
vQueueDelete(s_event_queue);
s_event_queue = NULL;
vSemaphoreDelete(s_io_intr_event);
s_io_intr_event = NULL;
return ret;
}
// Enable interrupts
SDMMC.intmask.val =
SDMMC_INTMASK_CD |
SDMMC_INTMASK_CMD_DONE |
SDMMC_INTMASK_DATA_OVER |
SDMMC_INTMASK_RCRC | SDMMC_INTMASK_DCRC |
SDMMC_INTMASK_RTO | SDMMC_INTMASK_DTO | SDMMC_INTMASK_HTO |
SDMMC_INTMASK_SBE | SDMMC_INTMASK_EBE |
SDMMC_INTMASK_RESP_ERR | SDMMC_INTMASK_HLE; //sdio is enabled only when use.
SDMMC.ctrl.int_enable = 1;
// Disable generation of Busy Clear Interrupt
SDMMC.cardthrctl.busy_clr_int_en = 0;
// Enable DMA
sdmmc_host_dma_init();
// Initialize transaction handler
ret = sdmmc_host_transaction_handler_init();
if (ret != ESP_OK) {
vQueueDelete(s_event_queue);
s_event_queue = NULL;
vSemaphoreDelete(s_io_intr_event);
s_io_intr_event = NULL;
esp_intr_free(s_intr_handle);
s_intr_handle = NULL;
return ret;
}
return ESP_OK;
}
#ifdef SOC_SDMMC_USE_IOMUX
static void configure_pin_iomux(uint8_t gpio_num)
{
const int sdmmc_func = 3;
const int drive_strength = 3;
assert(gpio_num != (uint8_t) GPIO_NUM_NC);
gpio_pulldown_dis(gpio_num);
uint32_t reg = GPIO_PIN_MUX_REG[gpio_num];
assert(reg != UINT32_MAX);
PIN_INPUT_ENABLE(reg);
gpio_hal_iomux_func_sel(reg, sdmmc_func);
PIN_SET_DRV(reg, drive_strength);
}
#elif SOC_SDMMC_USE_GPIO_MATRIX
static void configure_pin_gpio_matrix(uint8_t gpio_num, uint8_t gpio_matrix_sig, gpio_mode_t mode, const char* name)
{
assert (gpio_num != (uint8_t) GPIO_NUM_NC);
ESP_LOGD(TAG, "using GPIO%d as %s pin", gpio_num, name);
gpio_reset_pin(gpio_num);
gpio_set_direction(gpio_num, mode);
gpio_pulldown_dis(gpio_num);
if (mode == GPIO_MODE_INPUT || mode == GPIO_MODE_INPUT_OUTPUT) {
esp_rom_gpio_connect_in_signal(gpio_num, gpio_matrix_sig, false);
}
if (mode == GPIO_MODE_OUTPUT || mode == GPIO_MODE_INPUT_OUTPUT) {
esp_rom_gpio_connect_out_signal(gpio_num, gpio_matrix_sig, false, false);
}
}
#endif // SOC_SDMMC_USE_{IOMUX,GPIO_MATRIX}
esp_err_t sdmmc_host_init_slot(int slot, const sdmmc_slot_config_t* slot_config)
{
if (!s_intr_handle) {
return ESP_ERR_INVALID_STATE;
}
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if (slot_config == NULL) {
return ESP_ERR_INVALID_ARG;
}
int gpio_cd = slot_config->cd;
int gpio_wp = slot_config->wp;
uint8_t slot_width = slot_config->width;
// Configure pins
const sdmmc_slot_info_t* slot_info = &sdmmc_slot_info[slot];
if (slot_width == SDMMC_SLOT_WIDTH_DEFAULT) {
slot_width = slot_info->width;
}
else if (slot_width > slot_info->width) {
return ESP_ERR_INVALID_ARG;
}
s_slot_width[slot] = slot_width;
#if SOC_SDMMC_USE_GPIO_MATRIX
/* Save pin configuration for this slot */
s_sdmmc_slot_gpio_num[slot].clk = slot_config->clk;
s_sdmmc_slot_gpio_num[slot].cmd = slot_config->cmd;
s_sdmmc_slot_gpio_num[slot].d0 = slot_config->d0;
/* Save d1 even in 1-line mode, it might be needed for SDIO INT line */
s_sdmmc_slot_gpio_num[slot].d1 = slot_config->d1;
if (slot_width >= 4) {
s_sdmmc_slot_gpio_num[slot].d2 = slot_config->d2;
}
/* Save d3 even for 1-line mode, as it needs to be set high */
s_sdmmc_slot_gpio_num[slot].d3 = slot_config->d3;
if (slot_width >= 8) {
s_sdmmc_slot_gpio_num[slot].d4 = slot_config->d4;
s_sdmmc_slot_gpio_num[slot].d5 = slot_config->d5;
s_sdmmc_slot_gpio_num[slot].d6 = slot_config->d6;
s_sdmmc_slot_gpio_num[slot].d7 = slot_config->d7;
}
#endif
bool pullup = slot_config->flags & SDMMC_SLOT_FLAG_INTERNAL_PULLUP;
if (pullup) {
sdmmc_host_pullup_en_internal(slot, slot_config->width);
}
configure_pin(clk, slot, GPIO_MODE_OUTPUT);
configure_pin(cmd, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d0, slot, GPIO_MODE_INPUT_OUTPUT);
if (slot_width >= 4) {
configure_pin(d1, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d2, slot, GPIO_MODE_INPUT_OUTPUT);
// Force D3 high to make slave enter SD mode.
// Connect to peripheral after width configuration.
gpio_config_t gpio_conf = {
.pin_bit_mask = BIT64(GPIO_NUM(slot, d3)),
.mode = GPIO_MODE_OUTPUT,
.pull_up_en = 0,
.pull_down_en = 0,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&gpio_conf);
gpio_set_level(GPIO_NUM(slot, d3), 1);
}
if (slot_width == 8) {
configure_pin(d4, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d5, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d6, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d7, slot, GPIO_MODE_INPUT_OUTPUT);
}
// SDIO slave interrupt is edge sensitive to ~(int_n | card_int | card_detect)
// set this and card_detect to high to enable sdio interrupt
esp_rom_gpio_connect_in_signal(GPIO_MATRIX_CONST_ONE_INPUT, slot_info->card_int, false);
// Set up Card Detect input
int matrix_in_cd;
if (gpio_cd != SDMMC_SLOT_NO_CD) {
ESP_LOGD(TAG, "using GPIO%d as CD pin", gpio_cd);
esp_rom_gpio_pad_select_gpio(gpio_cd);
gpio_set_direction(gpio_cd, GPIO_MODE_INPUT);
matrix_in_cd = gpio_cd;
} else {
// if not set, default to CD low (card present)
matrix_in_cd = GPIO_MATRIX_CONST_ZERO_INPUT;
}
esp_rom_gpio_connect_in_signal(matrix_in_cd, slot_info->card_detect, false);
// Set up Write Protect input
int matrix_in_wp;
if (gpio_wp != SDMMC_SLOT_NO_WP) {
ESP_LOGD(TAG, "using GPIO%d as WP pin", gpio_wp);
esp_rom_gpio_pad_select_gpio(gpio_wp);
gpio_set_direction(gpio_wp, GPIO_MODE_INPUT);
matrix_in_wp = gpio_wp;
} else {
// if not set, default to WP high (not write protected)
matrix_in_wp = GPIO_MATRIX_CONST_ONE_INPUT;
}
// WP signal is normally active low, but hardware expects
// an active-high signal, so invert it in GPIO matrix
esp_rom_gpio_connect_in_signal(matrix_in_wp, slot_info->write_protect, true);
// By default, set probing frequency (400kHz) and 1-bit bus
esp_err_t ret = sdmmc_host_set_card_clk(slot, 400);
if (ret != ESP_OK) {
return ret;
}
ret = sdmmc_host_set_bus_width(slot, 1);
if (ret != ESP_OK) {
return ret;
}
return ESP_OK;
}
esp_err_t sdmmc_host_deinit(void)
{
if (!s_intr_handle) {
return ESP_ERR_INVALID_STATE;
}
esp_intr_free(s_intr_handle);
s_intr_handle = NULL;
vQueueDelete(s_event_queue);
s_event_queue = NULL;
vQueueDelete(s_io_intr_event);
s_io_intr_event = NULL;
sdmmc_host_input_clk_disable();
sdmmc_host_transaction_handler_deinit();
periph_module_disable(PERIPH_SDMMC_MODULE);
return ESP_OK;
}
esp_err_t sdmmc_host_wait_for_event(int tick_count, sdmmc_event_t* out_event)
{
if (!out_event) {
return ESP_ERR_INVALID_ARG;
}
if (!s_event_queue) {
return ESP_ERR_INVALID_STATE;
}
int ret = xQueueReceive(s_event_queue, out_event, tick_count);
if (ret == pdFALSE) {
return ESP_ERR_TIMEOUT;
}
return ESP_OK;
}
esp_err_t sdmmc_host_set_bus_width(int slot, size_t width)
{
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if (sdmmc_slot_info[slot].width < width) {
return ESP_ERR_INVALID_ARG;
}
const uint16_t mask = BIT(slot);
if (width == 1) {
SDMMC.ctype.card_width_8 &= ~mask;
SDMMC.ctype.card_width &= ~mask;
} else if (width == 4) {
SDMMC.ctype.card_width_8 &= ~mask;
SDMMC.ctype.card_width |= mask;
// D3 was set to GPIO high to force slave into SD mode, until 4-bit mode is set
configure_pin(d3, slot, GPIO_MODE_INPUT_OUTPUT);
} else if (width == 8) {
SDMMC.ctype.card_width_8 |= mask;
// D3 was set to GPIO high to force slave into SD mode, until 4-bit mode is set
configure_pin(d3, slot, GPIO_MODE_INPUT_OUTPUT);
} else {
return ESP_ERR_INVALID_ARG;
}
ESP_LOGD(TAG, "slot=%d width=%d", slot, width);
return ESP_OK;
}
size_t sdmmc_host_get_slot_width(int slot)
{
assert( slot == 0 || slot == 1 );
return s_slot_width[slot];
}
esp_err_t sdmmc_host_set_bus_ddr_mode(int slot, bool ddr_enabled)
{
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if (s_slot_width[slot] == 8 && ddr_enabled) {
ESP_LOGW(TAG, "DDR mode with 8-bit bus width is not supported yet");
// requires reconfiguring controller clock for 2x card frequency
return ESP_ERR_NOT_SUPPORTED;
}
uint32_t mask = BIT(slot);
if (ddr_enabled) {
SDMMC.uhs.ddr |= mask;
SDMMC.emmc_ddr_reg |= mask;
} else {
SDMMC.uhs.ddr &= ~mask;
SDMMC.emmc_ddr_reg &= ~mask;
}
ESP_LOGD(TAG, "slot=%d ddr=%d", slot, ddr_enabled ? 1 : 0);
return ESP_OK;
}
static void sdmmc_host_dma_init(void)
{
SDMMC.ctrl.dma_enable = 1;
SDMMC.bmod.val = 0;
SDMMC.bmod.sw_reset = 1;
SDMMC.idinten.ni = 1;
SDMMC.idinten.ri = 1;
SDMMC.idinten.ti = 1;
}
void sdmmc_host_dma_stop(void)
{
SDMMC.ctrl.use_internal_dma = 0;
SDMMC.ctrl.dma_reset = 1;
SDMMC.bmod.fb = 0;
SDMMC.bmod.enable = 0;
}
void sdmmc_host_dma_prepare(sdmmc_desc_t* desc, size_t block_size, size_t data_size)
{
// Set size of data and DMA descriptor pointer
SDMMC.bytcnt = data_size;
SDMMC.blksiz = block_size;
SDMMC.dbaddr = desc;
// Enable everything needed to use DMA
SDMMC.ctrl.dma_enable = 1;
SDMMC.ctrl.use_internal_dma = 1;
SDMMC.bmod.enable = 1;
SDMMC.bmod.fb = 1;
sdmmc_host_dma_resume();
}
void sdmmc_host_dma_resume(void)
{
SDMMC.pldmnd = 1;
}
bool sdmmc_host_card_busy(void)
{
return SDMMC.status.data_busy == 1;
}
esp_err_t sdmmc_host_io_int_enable(int slot)
{
configure_pin(d1, slot, GPIO_MODE_INPUT_OUTPUT);
return ESP_OK;
}
esp_err_t sdmmc_host_io_int_wait(int slot, TickType_t timeout_ticks)
{
/* SDIO interrupts are negedge sensitive ones: the status bit is only set
* when first interrupt triggered.
*
* If D1 GPIO is low when entering this function, we know that interrupt
* (in SDIO sense) has occurred and we don't need to use SDMMC peripheral
* interrupt.
*/
SDMMC.intmask.sdio &= ~BIT(slot); /* Disable SDIO interrupt */
SDMMC.rintsts.sdio = BIT(slot);
if (gpio_get_level(GPIO_NUM(slot, d1)) == 0) {
return ESP_OK;
}
/* Otherwise, need to wait for an interrupt. Since D1 was high,
* SDMMC peripheral interrupt is guaranteed to trigger on negedge.
*/
xSemaphoreTake(s_io_intr_event, 0);
SDMMC.intmask.sdio |= BIT(slot); /* Re-enable SDIO interrupt */
if (xSemaphoreTake(s_io_intr_event, timeout_ticks) == pdTRUE) {
return ESP_OK;
} else {
return ESP_ERR_TIMEOUT;
}
}
/**
* @brief SDMMC interrupt handler
*
* All communication in SD protocol is driven by the master, and the hardware
* handles things like stop commands automatically.
* So the interrupt handler doesn't need to do much, we just push interrupt
* status into a queue, clear interrupt flags, and let the task currently
* doing communication figure out what to do next.
* This also applies to SDIO interrupts which are generated by the slave.
*
* Card detect interrupts pose a small issue though, because if a card is
* plugged in and out a few times, while there is no task to process
* the events, event queue can become full and some card detect events
* may be dropped. We ignore this problem for now, since the there are no other
* interesting events which can get lost due to this.
*/
static void sdmmc_isr(void* arg) {
QueueHandle_t queue = (QueueHandle_t) arg;
sdmmc_event_t event;
int higher_priority_task_awoken = pdFALSE;
uint32_t pending = SDMMC.mintsts.val & 0xFFFF;
SDMMC.rintsts.val = pending;
event.sdmmc_status = pending;
uint32_t dma_pending = SDMMC.idsts.val;
SDMMC.idsts.val = dma_pending;
event.dma_status = dma_pending & 0x1f;
if (pending != 0 || dma_pending != 0) {
xQueueSendFromISR(queue, &event, &higher_priority_task_awoken);
}
uint32_t sdio_pending = SDMMC.mintsts.sdio;
if (sdio_pending) {
// disable the interrupt (no need to clear here, this is done in sdmmc_host_io_wait_int)
SDMMC.intmask.sdio &= ~sdio_pending;
xSemaphoreGiveFromISR(s_io_intr_event, &higher_priority_task_awoken);
}
if (higher_priority_task_awoken == pdTRUE) {
portYIELD_FROM_ISR();
}
}
static esp_err_t sdmmc_host_pullup_en_internal(int slot, int width)
{
if (width > sdmmc_slot_info[slot].width) {
//in esp32 we only support 8 bit in slot 0, note this is occupied by the flash by default
return ESP_ERR_INVALID_ARG;
}
// according to the spec, the host controls the clk, we don't to pull it up here
gpio_pullup_en(GPIO_NUM(slot, cmd));
gpio_pullup_en(GPIO_NUM(slot, d0));
if (width >= 4) {
gpio_pullup_en(GPIO_NUM(slot, d1));
gpio_pullup_en(GPIO_NUM(slot, d2));
gpio_pullup_en(GPIO_NUM(slot, d3));
}
if (width == 8) {
gpio_pullup_en(GPIO_NUM(slot, d4));
gpio_pullup_en(GPIO_NUM(slot, d5));
gpio_pullup_en(GPIO_NUM(slot, d6));
gpio_pullup_en(GPIO_NUM(slot, d7));
}
return ESP_OK;
}
/* Deprecared public function */
esp_err_t sdmmc_host_pullup_en(int slot, int width) __attribute__((alias("sdmmc_host_pullup_en_internal")));
Reference in New Issue View Git Blame Copy Permalink