alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
dd40877ab2
esp-idf/components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h
Alexey Lapshin dd40877ab2 sys_view: upgrade to version 3.32
2023-01-24 00:26:58 +07:00

589 lines
20 KiB
C
Raw Blame History

/*
* SPDX-FileCopyrightText: 1995-2021 SEGGER Microcontroller GmbH
*
* SPDX-License-Identifier: BSD-1-Clause
*
* SPDX-FileContributor: 2023 Espressif Systems (Shanghai) CO LTD
*/
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************
* *
* (c) 1995 - 2021 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the SystemView and RTT protocol, and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* condition is met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this condition and the following disclaimer. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: 3.32 *
* *
**********************************************************************
-------------------------- END-OF-HEADER -----------------------------
File : SEGGER_SYSVIEW_ConfDefaults.h
Purpose : Defines defaults for configurable defines used in
SEGGER SystemView.
Revision: $Rev: 26230 $
*/
#ifndef SEGGER_SYSVIEW_CONFDEFAULTS_H
#define SEGGER_SYSVIEW_CONFDEFAULTS_H
/*********************************************************************
*
* #include Section
*
**********************************************************************
*/
#include "SEGGER_SYSVIEW_Conf.h"
#include "SEGGER_RTT_Conf.h"
#ifdef __cplusplus
extern "C" {
#endif
/*********************************************************************
*
* Defines, fixed
*
**********************************************************************
*/
//
// Use auto-detection for SEGGER_SYSVIEW_CORE define
// based on compiler-/toolchain-specific defines
// to define SEGGER_SYSVIEW_GET_INTERRUPT_ID and SEGGER_SYSVIEW_GET_TIMESTAMP
//
#define SEGGER_SYSVIEW_CORE_OTHER 0
#define SEGGER_SYSVIEW_CORE_CM0 1 // Cortex-M0/M0+/M1
#define SEGGER_SYSVIEW_CORE_CM3 2 // Cortex-M3/M4/M7
#define SEGGER_SYSVIEW_CORE_RX 3 // Renesas RX
#ifndef SEGGER_SYSVIEW_CORE
#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __SEGGER_CC__) || (defined __GNUC__) || (defined __clang__)
#if (defined __ARM_ARCH_6M__) || (defined __ARM_ARCH_8M_BASE__)
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__ICCARM__)
#if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) \
|| (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) \
|| (defined (__ARM7M__) && (__CORE__ == __ARM7M__)) \
|| (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) \
|| (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__CC_ARM)
#if (defined(__TARGET_ARCH_6S_M))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__TI_ARM__)
#ifdef __TI_ARM_V6M0__
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif (defined(__TI_ARM_V7M3__) || defined(__TI_ARM_V7M4__))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__ICCRX__)
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
#elif defined(__RX)
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
#endif
#ifndef SEGGER_SYSVIEW_CORE
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_OTHER
#endif
#endif
/*********************************************************************
*
* Defines, defaults
*
**********************************************************************
*/
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_APP_NAME
*
* Description
* The application name to be displayed in SystemView.
* Default
* "SystemView-enabled Application"
* Notes
* Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc().
*/
#ifndef SEGGER_SYSVIEW_APP_NAME
#define SEGGER_SYSVIEW_APP_NAME "SystemView-enabled Application"
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_DEVICE_NAME
*
* Description
* The target device name to be displayed in SystemView.
* Default
* "undefined device"
* Notes
* Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc().
*/
#ifndef SEGGER_SYSVIEW_DEVICE_NAME
#define SEGGER_SYSVIEW_DEVICE_NAME "undefined device"
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_GET_INTERRUPT_ID()
*
* Description
* Function macro to retrieve the Id of the currently active
* interrupt.
* Default
* Call user-supplied function SEGGER_SYSVIEW_X_GetInterruptId().
* Notes
* For some known compilers and cores, a ready-to-use, core-specific
* default is set.
* ARMv7M: Read ICSR[8:0] (active vector)
* ARMv6M: Read ICSR[5:0] (active vector)
*/
#ifndef SEGGER_SYSVIEW_GET_INTERRUPT_ID
#if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x1FF) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[8:0] = active vector)
#elif SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM0
#if defined(__ICCARM__)
#if (__VER__ > 6010000)
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() (__get_IPSR()) // Workaround for IAR, which might do a byte-access to 0xE000ED04. Read IPSR instead.
#else
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Older versions of IAR do not include __get_IPSR, but might also not optimize to byte-access.
#endif
#else
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[5:0] = active vector)
#endif
#else
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() SEGGER_SYSVIEW_X_GetInterruptId() // Get the currently active interrupt Id from the user-provided function.
#endif
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_GET_TIMESTAMP()
*
* Description
* Function macro to retrieve a system timestamp for SYSVIEW events.
* Default
* Call user-supplied function SEGGER_SYSVIEW_X_GetTimestamp().
* Notes
* For some known compilers and cores, a ready-to-use, core-specific
* default is set.
* ARMv7M: Read Cortex-M Cycle Count register.
*
* The system timestamp clock frequency has to be passed in
* SEGGER_SYSVIEW_Init().
*/
#ifndef SEGGER_SYSVIEW_GET_TIMESTAMP
#if defined (SEGGER_SYSVIEW_CORE) && (SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3)
#define SEGGER_SYSVIEW_GET_TIMESTAMP() (*(U32 *)(0xE0001004)) // Retrieve a system timestamp. Cortex-M cycle counter.
#else
#define SEGGER_SYSVIEW_GET_TIMESTAMP() SEGGER_SYSVIEW_X_GetTimestamp() // Retrieve a system timestamp via user-defined function
#endif
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_TIMESTAMP_BITS
*
* Description
* Number of valid (low-order) bits delivered in system timestamp.
* Default
* 32
* Notes
* Value has to match system timestamp clock source.
*/
// Define number of valid bits low-order delivered by clock source.
#ifndef SEGGER_SYSVIEW_TIMESTAMP_BITS
#define SEGGER_SYSVIEW_TIMESTAMP_BITS 32
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_RTT_CHANNEL
*
* Description
* The RTT channel that SystemView will use.
* Default
* 0: Auto selection.
* Notes
* Value has to be lower than SEGGER_RTT_MAX_NUM_UP_BUFFERS.
*/
#ifndef SEGGER_SYSVIEW_RTT_CHANNEL
#define SEGGER_SYSVIEW_RTT_CHANNEL 1
#endif
// Sanity check of RTT channel
#if (SEGGER_SYSVIEW_RTT_CHANNEL == 0) && (SEGGER_RTT_MAX_NUM_UP_BUFFERS < 2)
#error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > 1!"
#elif (SEGGER_SYSVIEW_RTT_CHANNEL >= SEGGER_RTT_MAX_NUM_UP_BUFFERS)
#error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > SEGGER_SYSVIEW_RTT_CHANNEL!"
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_RTT_BUFFER_SIZE
*
* Description
* Number of bytes that SystemView uses for the RTT buffer.
* Default
* 1024
*/
#ifndef SEGGER_SYSVIEW_RTT_BUFFER_SIZE
#define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 1024
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_SECTION
*
* Description
* Section to place the SystemView RTT Buffer into.
* Default
* undefined: Do not place into a specific section.
* Notes
* If SEGGER_RTT_SECTION is defined, the default changes to use
* this section for the SystemView RTT Buffer, too.
*/
#if !(defined SEGGER_SYSVIEW_SECTION) && (defined SEGGER_RTT_SECTION)
#define SEGGER_SYSVIEW_SECTION SEGGER_RTT_SECTION
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE
*
* Description
* Largest cache line size (in bytes) in the target system.
* Default
* 0
* Notes
* Required in systems with caches to make sure that the SystemView
* RTT buffer can be aligned accordingly.
*/
#ifndef SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE
#define SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_ID_BASE
*
* Description
* Lowest Id reported by the application.
* Default
* 0
* Notes
* Value is usually subtracted from mailboxes, semaphores, tasks,
* .... addresses, to compress event parameters.
* Should be the lowest RAM address of the system.
*/
#ifndef SEGGER_SYSVIEW_ID_BASE
#define SEGGER_SYSVIEW_ID_BASE 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_ID_SHIFT
*
* Description
* Number of bits to shift Ids.
* Default
* 0
* Notes
* Ids are shifted to compress event parameters.
* Should match the alignment of Ids (addresses),
* e.g. 2 when Ids are 4 byte aligned.
*/
#ifndef SEGGER_SYSVIEW_ID_SHIFT
#define SEGGER_SYSVIEW_ID_SHIFT 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_MAX_ARGUMENTS
*
* Description
* Maximum number of arguments which are handled with SystemView
* print routines or may be encoded in one recording function.
* routines.
* Default
* 16
*/
#ifndef SEGGER_SYSVIEW_MAX_ARGUMENTS
#define SEGGER_SYSVIEW_MAX_ARGUMENTS 16
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_MAX_STRING_LEN
*
* Description
* Maximum string length which can be used in SystemView print and
* system description routines.
* Default
* 128
*/
#ifndef SEGGER_SYSVIEW_MAX_STRING_LEN
#define SEGGER_SYSVIEW_MAX_STRING_LEN 128
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_SUPPORT_LONG_ID
*
* Description
* It set, support enconding Evend Ids longer than 14 bit.
* Default
* 1
*/
#ifndef SEGGER_SYSVIEW_SUPPORT_LONG_ID
#define SEGGER_SYSVIEW_SUPPORT_LONG_ID 1
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_SUPPORT_LONG_DATA
*
* Description
* It set, support enconding event data longer than 14 bit.
* Default
* 0
*/
#ifndef SEGGER_SYSVIEW_SUPPORT_LONG_DATA
#define SEGGER_SYSVIEW_SUPPORT_LONG_DATA 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
*
* Description
* If enabled, on SEGGER_SYSVIEW_PrintHost, check the format string
* and if it includes unsupported formatters, use formatting on the
* target instead.
* Default
* 0: Disabled.
*/
#ifndef SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
#define SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_USE_INTERNAL_RECORDER
*
* Description
* If set, an internal recorder, such as UART or IP is used.
* Default
* 0: Disabled.
* Notes
* Convenience define to be used by SEGGER_SYSVIEW_Conf(),
* such as in embOS configuration to enable Cortex-M cycle counter.
*/
#ifndef SEGGER_SYSVIEW_USE_INTERNAL_RECORDER
#define SEGGER_SYSVIEW_USE_INTERNAL_RECORDER 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_CAN_RESTART
*
* Description
* If enabled, send the SystemView start sequence on every start
* command, not just on the first one.
* Enables restart when SystemView disconnected unexpectedly.
* Default
* 1: Enabled
*/
#ifndef SEGGER_SYSVIEW_CAN_RESTART
#define SEGGER_SYSVIEW_CAN_RESTART 1
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_START_ON_INIT
*
* Description
* Enable calling SEGGER_SYSVIEW_Start() after initialization.
* Default
* 0: Disabled.
* Notes
* Convenience define to be used by SEGGER_SYSVIEW_Conf(),
* such as in embOS configuration.
*/
#ifndef SEGGER_SYSVIEW_START_ON_INIT
#define SEGGER_SYSVIEW_START_ON_INIT 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_USE_STATIC_BUFFER
*
* Description
* If enabled, use a static buffer instead of a buffer on the stack
* for SystemView event packets.
* Default
* 1: Enabled.
* Notes
* If enabled, the static memory use by SystemView is increased by
* the maximum packet size. SystemView is locked on entry of a
* recording function.
* If disabled, the stack usage by SystemView recording functions
* might be increased by up to the maximum packet size. SystemView
* is locked when writing the packet to the RTT buffer.
*/
#ifndef SEGGER_SYSVIEW_USE_STATIC_BUFFER
#define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_MAX_PACKET_SIZE
*
* Description
* Maximum packet size for a SystemView event.
* Default
* Automatically calculated.
* Notes
* The maximum packet size is mainly defined by the maximum string
* length and the maximum number of arguments.
*/
#ifndef SEGGER_SYSVIEW_MAX_PACKET_SIZE
#define SEGGER_SYSVIEW_MAX_PACKET_SIZE (SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32)
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_POST_MORTEM_MODE
*
* Description
* If enabled, SystemView records for post-mortem analysis instead
* of real-time analysis.
* Default
* 0: Disabled.
* Notes
* For more information refer to
* https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode
*/
#ifndef SEGGER_SYSVIEW_POST_MORTEM_MODE
#define SEGGER_SYSVIEW_POST_MORTEM_MODE 0
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT
*
* Description
* Configure how frequently syncronization is sent in post-mortem
* mode.
* Default
* 8: (1 << 8) = Every 256 Events.
* Notes
* In post-mortem mode, at least one sync has to be in the RTT buffer.
* Recommended sync frequency: Buffer Size / 16
* For more information refer to
* https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode
*/
#ifndef SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT
#define SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT 8
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_ON_EVENT_RECORDED()
*
* Description
* Function macro to notify recorder about a new event in buffer.
* Default
* undefined: Do not notify recorder.
* Notes
* Used for non-J-Link recorder,
* such as to enable transmission via UART or notify IP task.
*/
#ifndef SEGGER_SYSVIEW_ON_EVENT_RECORDED
#define SEGGER_SYSVIEW_ON_EVENT_RECORDED(NumBytes)
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_LOCK()
*
* Description
* Function macro to (nestable) lock SystemView recording.
* Default
* Use RTT Locking mechanism (defined by SEGGER_RTT_LOCK()).
* Notes
* If SystemView recording is not locked, recording events from
* interrupts and tasks may lead to unpredictable, undefined, event
* data.
*/
#ifndef SEGGER_SYSVIEW_LOCK
unsigned SEGGER_SYSVIEW_X_SysView_Lock(void);
#define SEGGER_SYSVIEW_LOCK() unsigned _SYSVIEW_int_state = SEGGER_SYSVIEW_X_SysView_Lock()
#endif
/*********************************************************************
*
* Define: SEGGER_SYSVIEW_UNLOCK
*
* Description
* Function macro to unlock SystemView recording.
* Default
* Use RTT Unlocking mechanism (defined by SEGGER_RTT_UNLOCK()).
*/
#ifndef SEGGER_SYSVIEW_UNLOCK
void SEGGER_SYSVIEW_X_SysView_Unlock(unsigned int_state);
#define SEGGER_SYSVIEW_UNLOCK() SEGGER_SYSVIEW_X_SysView_Unlock(_SYSVIEW_int_state)
#endif
#ifdef __cplusplus
}
#endif
#endif
/*************************** End of file ****************************/
Reference in New Issue View Git Blame Copy Permalink