esp-idf/components/esp_driver_parlio/src/parlio_private.h
2024-05-27 17:20:15 +08:00

155 lines
4.7 KiB
C

/*
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "soc/soc_caps.h"
#include "soc/gdma_channel.h"
#include "soc/io_mux_reg.h"
#include "hal/parlio_types.h"
#include "hal/parlio_hal.h"
#include "hal/parlio_ll.h"
#include "hal/dma_types.h"
#include "hal/cache_hal.h"
#include "hal/cache_ll.h"
#include "rom/cache.h"
#include "esp_heap_caps.h"
#include "driver/parlio_types.h"
#include "esp_cache.h"
#include "esp_private/periph_ctrl.h"
#include "esp_private/esp_gpio_reserve.h"
#include "esp_private/gpio.h"
#if CONFIG_PARLIO_ISR_IRAM_SAFE
#define PARLIO_MEM_ALLOC_CAPS (MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT)
#else
#define PARLIO_MEM_ALLOC_CAPS MALLOC_CAP_DEFAULT
#endif
#define PARLIO_DMA_MEM_ALLOC_CAPS (MALLOC_CAP_INTERNAL | MALLOC_CAP_DMA)
#if SOC_PARLIO_TX_RX_SHARE_INTERRUPT
#define PARLIO_INTR_ALLOC_FLAG_SHARED ESP_INTR_FLAG_SHARED
#else
#define PARLIO_INTR_ALLOC_FLAG_SHARED 0
#endif
#if CONFIG_PARLIO_ISR_IRAM_SAFE
#define PARLIO_INTR_ALLOC_FLAG (ESP_INTR_FLAG_LOWMED | PARLIO_INTR_ALLOC_FLAG_SHARED | ESP_INTR_FLAG_IRAM)
#else
#define PARLIO_INTR_ALLOC_FLAG (ESP_INTR_FLAG_LOWMED | PARLIO_INTR_ALLOC_FLAG_SHARED)
#endif
#if defined(SOC_GDMA_TRIG_PERIPH_PARLIO0_BUS) // Parlio uses GDMA
#if defined(SOC_GDMA_BUS_AHB) && (SOC_GDMA_TRIG_PERIPH_PARLIO0_BUS == SOC_GDMA_BUS_AHB)
typedef dma_descriptor_align4_t parlio_dma_desc_t;
#define PARLIO_DMA_DESC_ALIGNMENT 4
#define PARLIO_GDMA_NEW_CHANNEL gdma_new_ahb_channel
#elif defined(SOC_GDMA_BUS_AXI) && (SOC_GDMA_TRIG_PERIPH_PARLIO0_BUS == SOC_GDMA_BUS_AXI)
typedef dma_descriptor_align8_t parlio_dma_desc_t;
#define PARLIO_DMA_DESC_ALIGNMENT 8
#define PARLIO_GDMA_NEW_CHANNEL gdma_new_axi_channel
#endif
#endif // defined(SOC_GDMA_TRIG_PERIPH_PARLIO0_BUS)
#define ALIGN_UP(num, align) (((num) + ((align) - 1)) & ~((align) - 1))
#if SOC_CACHE_INTERNAL_MEM_VIA_L1CACHE
#define PARLIO_MAX_ALIGNED_DMA_BUF_SIZE DMA_DESCRIPTOR_BUFFER_MAX_SIZE_64B_ALIGNED
#else
#define PARLIO_MAX_ALIGNED_DMA_BUF_SIZE DMA_DESCRIPTOR_BUFFER_MAX_SIZE_4B_ALIGNED
#endif
#ifdef CACHE_LL_L2MEM_NON_CACHE_ADDR
/* The descriptor address can be mapped by a fixed offset */
#define PARLIO_GET_NON_CACHED_DESC_ADDR(desc) (desc ? (parlio_dma_desc_t *)(CACHE_LL_L2MEM_NON_CACHE_ADDR(desc)) : NULL)
#else
#define PARLIO_GET_NON_CACHED_DESC_ADDR(desc) (desc)
#endif // CACHE_LL_L2MEM_NON_CACHE_ADDR
#if SOC_PERIPH_CLK_CTRL_SHARED
#define PARLIO_CLOCK_SRC_ATOMIC() PERIPH_RCC_ATOMIC()
#else
#define PARLIO_CLOCK_SRC_ATOMIC()
#endif
#if !SOC_RCC_IS_INDEPENDENT
// Reset and Clock Control registers are mixing with other peripherals, so we need to use a critical section
#define PARLIO_RCC_ATOMIC() PERIPH_RCC_ATOMIC()
#else
#define PARLIO_RCC_ATOMIC()
#endif // SOC_RCC_IS_INDEPENDENT
#define PARLIO_PM_LOCK_NAME_LEN_MAX 16
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PARLIO_TX_QUEUE_READY,
PARLIO_TX_QUEUE_PROGRESS,
PARLIO_TX_QUEUE_COMPLETE,
PARLIO_TX_QUEUE_MAX,
} parlio_tx_queue_status_t;
typedef enum {
PARLIO_DIR_TX,
PARLIO_DIR_RX,
} parlio_dir_t;
typedef enum {
PARLIO_TX_FSM_INIT_WAIT,
PARLIO_TX_FSM_INIT,
PARLIO_TX_FSM_ENABLE_WAIT,
PARLIO_TX_FSM_ENABLE,
PARLIO_TX_FSM_RUN_WAIT,
PARLIO_TX_FSM_RUN,
} parlio_tx_fsm_t;
typedef struct parlio_unit_t *parlio_unit_base_handle_t;
typedef struct parlio_group_t {
int group_id; // group ID, index from 0
portMUX_TYPE spinlock; // to protect per-group register level concurrent access
parlio_hal_context_t hal; // hal layer context
uint32_t dma_align; // DMA buffer alignment
parlio_unit_base_handle_t tx_units[SOC_PARLIO_TX_UNITS_PER_GROUP]; // tx unit handles
parlio_unit_base_handle_t rx_units[SOC_PARLIO_RX_UNITS_PER_GROUP]; // rx unit handles
} parlio_group_t;
/**
* @brief The common field of rx and tx unit structure
*/
struct parlio_unit_t {
int unit_id; // unit id
parlio_dir_t dir; // direction
parlio_group_t *group; // group handle
};
/**
* @brief Register the rx or tx unit to the parlio group
*
* @param[in] unit The TX/RX unit base handle
* @return
* - ESP_ERR_NO_MEM No memory for the unit
* - ESP_ERR_NOT_FOUND No available unit found on this group
* - ESP_OK Success to register the unit on the group
*/
esp_err_t parlio_register_unit_to_group(parlio_unit_base_handle_t unit);
/**
* @brief Unregister the rx or tx unit from the parlio group
*
* @param[in] unit The TX/RX unit base handle
*/
void parlio_unregister_unit_from_group(parlio_unit_base_handle_t unit);
#ifdef __cplusplus
}
#endif