esp-idf/examples/protocols/http_server/ws_echo_server
He Yin Ling a908174c06 test: remove fake binary size check in example test:
the binary size check in example test was removed long time ago. Now we
have updated ttfw_idf to raise exception when performance standard is
not found. These fake performance check will be regarded as error.
Remove them now.
2020-11-24 17:53:33 +08:00
..
main Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
CMakeLists.txt examples: http_server - add websocket echo server example with test 2020-03-18 20:24:46 +00:00
Makefile Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
README.md http_server: WebSocket server to set flag in transmitted messages by default 2020-07-13 14:39:22 +00:00
sdkconfig.ci http_server: websocket server to support async send 2020-03-18 20:24:46 +00:00
sdkconfig.defaults http_server: websocket server to support async send 2020-03-18 20:24:46 +00:00
ws_server_example_test.py test: remove fake binary size check in example test: 2020-11-24 17:53:33 +08:00

Websocket echo server

(See the README.md file in the upper level 'examples' directory for more information about examples.) This example demonstrates the HTTPD server using the WebSocket feature.

How to Use Example

The example starts a WS server on a local network, so a WS client is needed to interact with the server (an example test ws_server_example_test.py could be used as a simple WS client).

The server registers WebSocket handler which echoes back the received WebSocket frame. It also demonstrates use of asynchronous send, which is triggered on reception of a certain message.

Please note that the WebSocket HTTP server does not automatically fragment messages. Each outgoing frame has the FIN flag set by default. In case an application wants to send fragmented data, it must be done manually by setting the fragmented option and using the final flag as described in RFC6455, section 5.4.

Hardware Required

This example can be executed on any common development board, the only required interface is WiFi or Ethernet connection to a local network.

Configure the project

  • Open the project configuration menu (idf.py menuconfig)
  • Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (4932) example_connect: Got IPv6 event!
I (4942) example_connect: Connected to Espressif
I (4942) example_connect: IPv4 address: 192.168.4.2
I (4952) example_connect: IPv6 address: fe80:xxxx
I (4962) ws_echo_server: Starting server on port: '80'
I (4962) ws_echo_server: Registering URI handlers
D (4962) httpd: httpd_thread: web server started
D (4972) httpd: httpd_server: doing select maxfd+1 = 56
D (4982) httpd_uri: httpd_register_uri_handler: [0] installed /ws
D (17552) httpd: httpd_server: processing listen socket 54
D (17552) httpd: httpd_accept_conn: newfd = 57
D (17552) httpd_sess: httpd_sess_new: fd = 57
D (17562) httpd: httpd_accept_conn: complete
D (17562) httpd: httpd_server: doing select maxfd+1 = 58
D (17572) httpd: httpd_server: processing socket 57
D (17572) httpd_sess: httpd_sess_process: httpd_req_new
D (17582) httpd_parse: httpd_req_new: New request, has WS? No, sd->ws_handler valid? No, sd->ws_close? No
D (17592) httpd_txrx: httpd_recv_with_opt: requested length = 128
D (17592) httpd_txrx: httpd_recv_with_opt: received length = 128
D (17602) httpd_parse: read_block: received HTTP request block size = 128
D (17612) httpd_parse: cb_url: message begin
D (17612) httpd_parse: cb_url: processing url = /ws
D (17622) httpd_parse: verify_url: received URI = /ws
D (17622) httpd_parse: cb_header_field: headers begin
D (17632) httpd_txrx: httpd_unrecv: length = 110
D (17632) httpd_parse: pause_parsing: paused
D (17632) httpd_parse: cb_header_field: processing field = Host
D (17642) httpd_txrx: httpd_recv_with_opt: requested length = 128
D (17652) httpd_txrx: httpd_recv_with_opt: pending length = 110
D (17652) httpd_parse: read_block: received HTTP request block size = 110
D (17662) httpd_parse: continue_parsing: skip pre-parsed data of size = 5
D (17672) httpd_parse: continue_parsing: un-paused
D (17682) httpd_parse: cb_header_field: processing field = Upgrade
D (17682) httpd_parse: cb_header_value: processing value = websocket
D (17692) httpd_parse: cb_header_field: processing field = Connection
D (17702) httpd_parse: cb_header_value: processing value = Upgrade
D (17702) httpd_parse: cb_header_field: processing field = Sec-WebSocket-Key
D (17712) httpd_parse: cb_header_value: processing value = gfhjgfhjfj
D (17722) httpd_parse: cb_header_field: processing field = Sec-WebSocket-Proto
D (17722) httpd_parse: parse_block: parsed block size = 110
D (17732) httpd_txrx: httpd_recv_with_opt: requested length = 128
D (17742) httpd_txrx: httpd_recv_with_opt: received length = 40
D (17742) httpd_parse: read_block: received HTTP request block size = 40
D (17752) httpd_parse: cb_header_field: processing field = col
D (17752) httpd_parse: cb_header_value: processing value = echo
D (17762) httpd_parse: cb_header_field: processing field = Sec-WebSocket-Version
D (17772) httpd_parse: cb_header_value: processing value = 13
D (17772) httpd_parse: cb_headers_complete: bytes read     = 169
D (17782) httpd_parse: cb_headers_complete: content length = 0
D (17792) httpd_parse: cb_headers_complete: Got an upgrade request
D (17792) httpd_parse: pause_parsing: paused
D (17802) httpd_parse: cb_no_body: message complete
D (17802) httpd_parse: httpd_parse_req: parsing complete
D (17812) httpd_uri: httpd_uri: request for /ws with type 1
D (17812) httpd_uri: httpd_find_uri_handler: [0] = /ws
D (17822) httpd_uri: httpd_uri: Responding WS handshake to sock 57
D (17822) httpd_ws: httpd_ws_respond_server_handshake: Server key before encoding: gfhjgfhjfj258EAFA5-E914-47DA-95CA-C5AB0DC85B11
D (17842) httpd_ws: httpd_ws_respond_server_handshake: Generated server key: Jg/fQVRsgwdDzYeG8yNBHRajUxw=
D (17852) httpd_sess: httpd_sess_process: httpd_req_delete
D (17852) httpd_sess: httpd_sess_process: success
D (17862) httpd: httpd_server: doing select maxfd+1 = 58
D (17892) httpd: httpd_server: processing socket 57
D (17892) httpd_sess: httpd_sess_process: httpd_req_new
D (17892) httpd_parse: httpd_req_new: New request, has WS? Yes, sd->ws_handler valid? Yes, sd->ws_close? No
D (17902) httpd_parse: httpd_req_new: New WS request from existing socket
D (17902) httpd_txrx: httpd_recv_with_opt: requested length = 1
D (17912) httpd_txrx: httpd_recv_with_opt: received length = 1
D (17912) httpd_ws: httpd_ws_get_frame_type: First byte received: 0x81
D (17922) httpd_txrx: httpd_recv_with_opt: requested length = 1
D (17932) httpd_txrx: httpd_recv_with_opt: received length = 1
D (17932) httpd_txrx: httpd_recv_with_opt: requested length = 4
D (17942) httpd_txrx: httpd_recv_with_opt: received length = 4
D (17942) httpd_txrx: httpd_recv_with_opt: requested length = 13
D (17952) httpd_txrx: httpd_recv_with_opt: received length = 13
I (17962) ws_echo_server: Got packet with message: Trigger async
I (17962) ws_echo_server: Packet type: 1
D (17972) httpd_sess: httpd_sess_process: httpd_req_delete
D (17972) httpd_sess: httpd_sess_process: success
D (17982) httpd: httpd_server: doing select maxfd+1 = 58
D (17982) httpd: httpd_server: processing ctrl message
D (17992) httpd: httpd_process_ctrl_msg: work
D (18002) httpd: httpd_server: doing select maxfd+1 = 58

See the README.md file in the upper level 'examples' directory for more information about examples.