mirror of
https://github.com/espressif/esp-idf.git
synced 2024-09-20 10:46:02 -04:00
115 lines
8.5 KiB
ReStructuredText
115 lines
8.5 KiB
ReStructuredText
.. code-block:: none
|
|
|
|
espefuse.py -p PORT summary
|
|
|
|
espefuse.py v4.6-dev
|
|
Connecting....
|
|
Detecting chip type... Unsupported detection protocol, switching and trying again...
|
|
Connecting.....
|
|
Detecting chip type... ESP32
|
|
|
|
=== Run "summary" command ===
|
|
EFUSE_NAME (Block) Description = [Meaningful Value] [Readable/Writeable] (Hex Value)
|
|
----------------------------------------------------------------------------------------
|
|
Calibration fuses:
|
|
ADC_VREF (BLOCK0) True ADC reference voltage = 1121 R/W (0b00011)
|
|
|
|
Config fuses:
|
|
WR_DIS (BLOCK0) Efuse write disable mask = 0 R/W (0x0000)
|
|
RD_DIS (BLOCK0) Disable reading from BlOCK1-3 = 0 R/W (0x0)
|
|
DISABLE_APP_CPU (BLOCK0) Disables APP CPU = False R/W (0b0)
|
|
DISABLE_BT (BLOCK0) Disables Bluetooth = False R/W (0b0)
|
|
DIS_CACHE (BLOCK0) Disables cache = False R/W (0b0)
|
|
CHIP_CPU_FREQ_LOW (BLOCK0) If set alongside EFUSE_RD_CHIP_CPU_FREQ_RATED; the = False R/W (0b0)
|
|
ESP32's max CPU frequency is rated for 160MHz. 24
|
|
0MHz otherwise
|
|
CHIP_CPU_FREQ_RATED (BLOCK0) If set; the ESP32's maximum CPU frequency has been = True R/W (0b1)
|
|
rated
|
|
BLK3_PART_RESERVE (BLOCK0) BLOCK3 partially served for ADC calibration data = False R/W (0b0)
|
|
CLK8M_FREQ (BLOCK0) 8MHz clock freq override = 51 R/W (0x33)
|
|
VOL_LEVEL_HP_INV (BLOCK0) This field stores the voltage level for CPU to run = 0 R/W (0b00)
|
|
at 240 MHz; or for flash/PSRAM to run at 80 MHz.0
|
|
x0: level 7; 0x1: level 6; 0x2: level 5; 0x3: leve
|
|
l 4. (RO)
|
|
CODING_SCHEME (BLOCK0) Efuse variable block length scheme
|
|
= NONE (BLK1-3 len=256 bits) R/W (0b00)
|
|
CONSOLE_DEBUG_DISABLE (BLOCK0) Disable ROM BASIC interpreter fallback = True R/W (0b1)
|
|
DISABLE_SDIO_HOST (BLOCK0) = False R/W (0b0)
|
|
DISABLE_DL_CACHE (BLOCK0) Disable flash cache in UART bootloader = False R/W (0b0)
|
|
|
|
Flash fuses:
|
|
FLASH_CRYPT_CNT (BLOCK0) Flash encryption is enabled if this field has an o = 0 R/W (0b0000000)
|
|
dd number of bits set
|
|
FLASH_CRYPT_CONFIG (BLOCK0) Flash encryption config (key tweak bits) = 0 R/W (0x0)
|
|
|
|
Identity fuses:
|
|
CHIP_PACKAGE_4BIT (BLOCK0) Chip package identifier #4bit = False R/W (0b0)
|
|
CHIP_PACKAGE (BLOCK0) Chip package identifier = 1 R/W (0b001)
|
|
CHIP_VER_REV1 (BLOCK0) bit is set to 1 for rev1 silicon = True R/W (0b1)
|
|
CHIP_VER_REV2 (BLOCK0) = True R/W (0b1)
|
|
WAFER_VERSION_MINOR (BLOCK0) = 0 R/W (0b00)
|
|
WAFER_VERSION_MAJOR (BLOCK0) calc WAFER VERSION MAJOR from CHIP_VER_REV1 and CH = 3 R/W (0b011)
|
|
IP_VER_REV2 and apb_ctl_date (read only)
|
|
PKG_VERSION (BLOCK0) calc Chip package = CHIP_PACKAGE_4BIT << 3 + CHIP_ = 1 R/W (0x1)
|
|
PACKAGE (read only)
|
|
|
|
Jtag fuses:
|
|
JTAG_DISABLE (BLOCK0) Disable JTAG = False R/W (0b0)
|
|
|
|
Mac fuses:
|
|
MAC (BLOCK0) MAC address
|
|
= 94:b9:7e:5a:6e:58 (CRC 0xe2 OK) R/W
|
|
MAC_CRC (BLOCK0) CRC8 for MAC address = 226 R/W (0xe2)
|
|
MAC_VERSION (BLOCK3) Version of the MAC field = 0 R/W (0x00)
|
|
|
|
Security fuses:
|
|
UART_DOWNLOAD_DIS (BLOCK0) Disable UART download mode. Valid for ESP32 V3 and = False R/W (0b0)
|
|
newer; only
|
|
ABS_DONE_0 (BLOCK0) Secure boot V1 is enabled for bootloader image = False R/W (0b0)
|
|
ABS_DONE_1 (BLOCK0) Secure boot V2 is enabled for bootloader image = False R/W (0b0)
|
|
DISABLE_DL_ENCRYPT (BLOCK0) Disable flash encryption in UART bootloader = False R/W (0b0)
|
|
DISABLE_DL_DECRYPT (BLOCK0) Disable flash decryption in UART bootloader = False R/W (0b0)
|
|
KEY_STATUS (BLOCK0) Usage of efuse block 3 (reserved) = False R/W (0b0)
|
|
SECURE_VERSION (BLOCK3) Secure version for anti-rollback = 0 R/W (0x00000000)
|
|
BLOCK1 (BLOCK1) Flash encryption key
|
|
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
|
|
BLOCK2 (BLOCK2) Security boot key
|
|
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
|
|
BLOCK3 (BLOCK3) Variable Block 3
|
|
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
|
|
|
|
Spi Pad fuses:
|
|
SPI_PAD_CONFIG_HD (BLOCK0) read for SPI_pad_config_hd = 0 R/W (0b00000)
|
|
SPI_PAD_CONFIG_CLK (BLOCK0) Override SD_CLK pad (GPIO6/SPICLK) = 0 R/W (0b00000)
|
|
SPI_PAD_CONFIG_Q (BLOCK0) Override SD_DATA_0 pad (GPIO7/SPIQ) = 0 R/W (0b00000)
|
|
SPI_PAD_CONFIG_D (BLOCK0) Override SD_DATA_1 pad (GPIO8/SPID) = 0 R/W (0b00000)
|
|
SPI_PAD_CONFIG_CS0 (BLOCK0) Override SD_CMD pad (GPIO11/SPICS0) = 0 R/W (0b00000)
|
|
|
|
Vdd fuses:
|
|
XPD_SDIO_REG (BLOCK0) read for XPD_SDIO_REG = False R/W (0b0)
|
|
XPD_SDIO_TIEH (BLOCK0) If XPD_SDIO_FORCE & XPD_SDIO_REG = 1.8V R/W (0b0)
|
|
XPD_SDIO_FORCE (BLOCK0) Ignore MTDI pin (GPIO12) for VDD_SDIO on reset = False R/W (0b0)
|
|
|
|
Flash voltage (VDD_SDIO) determined by GPIO12 on reset (High for 1.8V, Low/NC for 3.3V)
|
|
|
|
|
|
To get a dump for all eFuse registers.
|
|
|
|
.. code-block:: none
|
|
|
|
espefuse.py -p PORT dump
|
|
|
|
espefuse.py v4.6-dev
|
|
Connecting....
|
|
Detecting chip type... Unsupported detection protocol, switching and trying again...
|
|
Connecting.......
|
|
Detecting chip type... ESP32
|
|
BLOCK0 ( ) [0 ] read_regs: 00000000 7e5a6e58 00e294b9 0000a200 00000333 00100000 00000004
|
|
BLOCK1 (flash_encryption) [1 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
|
|
BLOCK2 (secure_boot_v1 s) [2 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
|
|
BLOCK3 ( ) [3 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
|
|
|
|
EFUSE_REG_DEC_STATUS 0x00000000
|
|
|
|
=== Run "dump" command ===
|