esp-idf/components/esp_lcd/include/esp_lcd_panel_vendor.h
morris e10202a608 lcd: add esp_lcd component
* Support intel 8080 LCD panel IO on ESP32-S3
* Support RGB LCD panel on ESP32-S3
* Support SPI && I2C LCD panel IO on all esp chips
2021-05-12 17:53:32 +08:00

58 lines
1.9 KiB
C

/*
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include "esp_err.h"
#include "esp_lcd_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Configuration structure for panel device
*/
typedef struct {
int reset_gpio_num; /*!< GPIO used to reset the LCD panel, set to -1 if it's not used */
esp_lcd_color_space_t color_space; /*!< Set the color space used by the LCD panel */
unsigned int bits_per_pixel; /*!< Color depth, in bpp */
struct {
unsigned int reset_active_high: 1; /*!< Setting this if the panel reset is high level active */
} flags;
void *vendor_config; /* vendor specific configuration, optional, left as NULL if not used */
} esp_lcd_panel_dev_config_t;
/**
* @brief Create LCD panel for model ST7789
*
* @param[in] io LCD panel IO handle
* @param[in] panel_dev_config general panel device configuration
* @param[out] ret_panel Returned LCD panel handle
* @return
* - ESP_ERR_INVALID_ARG if parameter is invalid
* - ESP_ERR_NO_MEM if out of memory
* - ESP_OK on success
*/
esp_err_t esp_lcd_new_panel_st7789(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel);
/**
* @brief Create LCD panel for model SSD1306
*
* @param[in] io LCD panel IO handle
* @param[in] panel_dev_config general panel device configuration
* @param[out] ret_panel Returned LCD panel handle
* @return
* - ESP_ERR_INVALID_ARG if parameter is invalid
* - ESP_ERR_NO_MEM if out of memory
* - ESP_OK on success
*/
esp_err_t esp_lcd_new_panel_ssd1306(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel);
#ifdef __cplusplus
}
#endif