mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00

History

Ondrej Kosta dd81b56fb6 feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules Updated examples to be able to build for C5 and P4. Added Ethernet support for static_ip example.		2024-08-14 10:07:48 +02:00
..
main	feat: Add event handler in simple https_server example	2024-02-14 14:36:14 +05:30
CMakeLists.txt	feat(examples): add local components via idf_component.yml	2023-09-19 10:38:24 +02:00
pytest_https_server_simple.py	CI: enable more wifi cases	2023-01-06 06:03:52 +00:00
README.md	feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules	2024-08-14 10:07:48 +02:00
sdkconfig.ci	fix(ci): fixed misnamed kconfig option in https server ci config	2023-11-03 09:13:22 +08:00
sdkconfig.ci.dynamic_buffer	CI: use ssid password from stdin for pytest cases	2022-07-15 01:16:36 +08:00
sdkconfig.ci.srv_ses_tkt	esp-tls: Add build test for server session ticket option	2023-02-24 04:45:23 +00:00
sdkconfig.defaults	esp_netif: Remove tcpip_adapter compatibility layer	2022-03-10 08:19:43 +01:00

README.md

Supported Targets	ESP32	ESP32-C2	ESP32-C3	ESP32-C5	ESP32-C6	ESP32-H2	ESP32-P4	ESP32-S2	ESP32-S3

HTTP server with SSL support using OpenSSL

This example creates a SSL server that returns a simple HTML page when you visit its root URL.

See the esp_https_server component documentation for details.

How to use example

Before project configuration and build, be sure to set the correct chip target using idf.py set-target <chip_name>.

Configure the project

idf.py menuconfig

Open the project configuration menu (idf.py menuconfig) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Certificates

You will need to approve a security exception in your browser. This is because of a self signed certificate; this will be always the case, unless you preload the CA root into your browser/system as trusted.

You can generate a new certificate using the OpenSSL command line tool:

openssl req -newkey rsa:2048 -nodes -keyout prvtkey.pem -x509 -days 3650 -out cacert.pem -subj "/CN=ESP32 HTTPS server example"

Expiry time and metadata fields can be adjusted in the invocation.

Please see the openssl man pages (man openssl-req) for more details.

It is strongly recommended to not reuse the example certificate in your application; it is included only for demonstration.

Example Output

I (8596) example: Starting server
I (8596) esp_https_server: Starting server
I (8596) esp_https_server: Server listening on port 443
I (8596) example: Registering URI handlers
I (8606) esp_netif_handlers: example_connect: sta ip: 192.168.194.219, mask: 255.255.255.0, gw: 192.168.194.27
I (8616) example_connect: Got IPv4 event: Interface "example_connect: sta" address: 192.168.194.219
I (9596) example_connect: Got IPv6 event: Interface "example_connect: sta" address: fe80:0000:0000:0000:266f:28ff:fe80:2c74, type: ESP_IP6_ADDR_IS_LINK_LOCAL
I (9596) example_connect: Connected to example_connect: sta
W (9606) wifi:<ba-add>idx:0 (ifx:0, ee:6d:19:60:f6:0e), tid:0, ssn:2, winSize:64
I (9616) example_connect: - IPv4 address: 192.168.194.219
I (9616) example_connect: - IPv6 address: fe80:0000:0000:0000:266f:28ff:fe80:2c74, type: ESP_IP6_ADDR_IS_LINK_LOCAL
W (14426) wifi:<ba-add>idx:1 (ifx:0, ee:6d:19:60:f6:0e), tid:4, ssn:0, winSize:64
I (84896) esp_https_server: performing session handshake