mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
1936 lines
77 KiB
C
1936 lines
77 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <stdbool.h>
|
|
#include <math.h>
|
|
#include <esp_types.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/queue.h"
|
|
#include "freertos/semphr.h"
|
|
|
|
#include "sdkconfig.h"
|
|
|
|
#if CONFIG_I2S_ENABLE_DEBUG_LOG
|
|
// The local log level must be defined before including esp_log.h
|
|
// Set the maximum log level for this source file
|
|
#define LOG_LOCAL_LEVEL ESP_LOG_DEBUG
|
|
#endif
|
|
|
|
#include "soc/lldesc.h"
|
|
#include "driver/gpio.h"
|
|
#include "hal/gpio_hal.h"
|
|
#include "driver/i2s_types_legacy.h"
|
|
#include "hal/i2s_hal.h"
|
|
#if SOC_I2S_SUPPORTS_DAC
|
|
#include "driver/dac.h"
|
|
#include "esp_private/adc_share_hw_ctrl.h"
|
|
#include "adc1_private.h"
|
|
#include "driver/adc_i2s_legacy.h"
|
|
#include "driver/adc_types_legacy.h"
|
|
#endif // SOC_I2S_SUPPORTS_ADC
|
|
|
|
#if SOC_GDMA_SUPPORTED
|
|
#include "esp_private/gdma.h"
|
|
#endif
|
|
|
|
#include "clk_ctrl_os.h"
|
|
#include "esp_intr_alloc.h"
|
|
#include "esp_err.h"
|
|
#include "esp_check.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_log.h"
|
|
#include "esp_pm.h"
|
|
#include "esp_efuse.h"
|
|
#include "esp_rom_gpio.h"
|
|
#include "esp_private/periph_ctrl.h"
|
|
|
|
static const char *TAG = "i2s(legacy)";
|
|
|
|
#define I2S_ENTER_CRITICAL_ISR(i2s_num) portENTER_CRITICAL_ISR(&i2s_spinlock[i2s_num])
|
|
#define I2S_EXIT_CRITICAL_ISR(i2s_num) portEXIT_CRITICAL_ISR(&i2s_spinlock[i2s_num])
|
|
#define I2S_ENTER_CRITICAL(i2s_num) portENTER_CRITICAL(&i2s_spinlock[i2s_num])
|
|
#define I2S_EXIT_CRITICAL(i2s_num) portEXIT_CRITICAL(&i2s_spinlock[i2s_num])
|
|
|
|
#define I2S_DMA_BUFFER_MAX_SIZE 4092
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
#define I2S_COMM_MODE_ADC_DAC -1
|
|
#endif
|
|
|
|
/**
|
|
* @brief General clock configuration information
|
|
* @note It is a general purpose struct, not supposed to be used directly by user
|
|
*/
|
|
typedef struct {
|
|
uint32_t sample_rate_hz; /*!< I2S sample rate */
|
|
i2s_clock_src_t clk_src; /*!< Choose clock source */
|
|
i2s_mclk_multiple_t mclk_multiple; /*!< The multiple of mclk to the sample rate */
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
uint32_t up_sample_fp; /*!< Up-sampling param fp */
|
|
uint32_t up_sample_fs; /*!< Up-sampling param fs */
|
|
#endif
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
i2s_pdm_dsr_t dn_sample_mode; /*!< Down-sampling rate mode */
|
|
#endif
|
|
} i2s_clk_config_t;
|
|
|
|
/**
|
|
* @brief DMA buffer object
|
|
*
|
|
*/
|
|
typedef struct {
|
|
char **buf;
|
|
int buf_size;
|
|
volatile int rw_pos;
|
|
volatile void *curr_ptr;
|
|
SemaphoreHandle_t mux;
|
|
QueueHandle_t queue;
|
|
lldesc_t **desc;
|
|
} i2s_dma_t;
|
|
|
|
/**
|
|
* @brief I2S object instance
|
|
*
|
|
*/
|
|
typedef struct {
|
|
i2s_port_t i2s_num; /*!< I2S port number*/
|
|
int queue_size; /*!< I2S event queue size*/
|
|
QueueHandle_t i2s_queue; /*!< I2S queue handler*/
|
|
uint32_t last_buf_size; /*!< DMA last buffer size */
|
|
i2s_dma_t *tx; /*!< DMA Tx buffer*/
|
|
i2s_dma_t *rx; /*!< DMA Rx buffer*/
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_channel_handle_t rx_dma_chan; /*!< I2S rx gDMA channel handle*/
|
|
gdma_channel_handle_t tx_dma_chan; /*!< I2S tx gDMA channel handle*/
|
|
#else
|
|
intr_handle_t i2s_isr_handle; /*!< I2S Interrupt handle*/
|
|
#endif
|
|
uint32_t dma_desc_num;
|
|
uint32_t dma_frame_num;
|
|
bool tx_desc_auto_clear; /*!< I2S auto clear tx descriptor on underflow */
|
|
bool use_apll; /*!< I2S use APLL clock */
|
|
int fixed_mclk; /*!< I2S fixed MLCK clock */
|
|
i2s_mclk_multiple_t mclk_multiple; /*!< The multiple of I2S master clock(MCLK) to sample rate */
|
|
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_handle_t pm_lock;
|
|
#endif
|
|
i2s_hal_context_t hal; /*!< I2S hal context*/
|
|
|
|
/* New config */
|
|
i2s_dir_t dir;
|
|
i2s_role_t role;
|
|
i2s_comm_mode_t mode;
|
|
i2s_hal_slot_config_t slot_cfg;
|
|
i2s_clk_config_t clk_cfg;
|
|
uint32_t active_slot; /*!< Active slot number */
|
|
uint32_t total_slot; /*!< Total slot number */
|
|
} i2s_obj_t;
|
|
|
|
// Record the component name that using I2S peripheral
|
|
static const char *comp_using_i2s[SOC_I2S_NUM] = {[0 ... SOC_I2S_NUM - 1] = NULL};
|
|
|
|
// Global I2S object pointer
|
|
static i2s_obj_t *p_i2s[SOC_I2S_NUM] = {
|
|
[0 ... SOC_I2S_NUM - 1] = NULL,
|
|
};
|
|
|
|
// Global spin lock for all i2s controllers
|
|
static portMUX_TYPE i2s_spinlock[SOC_I2S_NUM] = {
|
|
[0 ... SOC_I2S_NUM - 1] = (portMUX_TYPE)portMUX_INITIALIZER_UNLOCKED,
|
|
};
|
|
|
|
|
|
__attribute__((weak)) esp_err_t i2s_platform_acquire_occupation(int id, const char *comp_name);
|
|
|
|
__attribute__((weak)) esp_err_t i2s_platform_release_occupation(int id);
|
|
|
|
/*-------------------------------------------------------------
|
|
I2S DMA operation
|
|
-------------------------------------------------------------*/
|
|
#if SOC_GDMA_SUPPORTED
|
|
static bool IRAM_ATTR i2s_dma_rx_callback(gdma_channel_handle_t dma_chan, gdma_event_data_t *event_data, void *user_data)
|
|
{
|
|
i2s_obj_t *p_i2s = (i2s_obj_t *) user_data;
|
|
portBASE_TYPE need_awoke = 0;
|
|
portBASE_TYPE tmp = 0;
|
|
int dummy;
|
|
i2s_event_t i2s_event;
|
|
uint32_t finish_desc;
|
|
|
|
if (p_i2s->rx) {
|
|
finish_desc = event_data->rx_eof_desc_addr;
|
|
i2s_event.size = ((lldesc_t *)finish_desc)->size;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->rx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->rx->queue, &dummy, &tmp);
|
|
need_awoke |= tmp;
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_RX_Q_OVF;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
xQueueSendFromISR(p_i2s->rx->queue, &(((lldesc_t *)finish_desc)->buf), &tmp);
|
|
need_awoke |= tmp;
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_RX_DONE;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
return need_awoke;
|
|
}
|
|
|
|
static bool IRAM_ATTR i2s_dma_tx_callback(gdma_channel_handle_t dma_chan, gdma_event_data_t *event_data, void *user_data)
|
|
{
|
|
i2s_obj_t *p_i2s = (i2s_obj_t *) user_data;
|
|
portBASE_TYPE need_awoke = 0;
|
|
portBASE_TYPE tmp = 0;
|
|
int dummy;
|
|
i2s_event_t i2s_event;
|
|
uint32_t finish_desc;
|
|
if (p_i2s->tx) {
|
|
finish_desc = event_data->tx_eof_desc_addr;
|
|
i2s_event.size = ((lldesc_t *)finish_desc)->size;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->tx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->tx->queue, &dummy, &tmp);
|
|
need_awoke |= tmp;
|
|
if (p_i2s->tx_desc_auto_clear) {
|
|
memset((void *) dummy, 0, p_i2s->tx->buf_size);
|
|
}
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_TX_Q_OVF;
|
|
i2s_event.size = p_i2s->tx->buf_size;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
xQueueSendFromISR(p_i2s->tx->queue, &(((lldesc_t *)finish_desc)->buf), &tmp);
|
|
need_awoke |= tmp;
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_TX_DONE;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
return need_awoke;
|
|
}
|
|
|
|
#else
|
|
static void IRAM_ATTR i2s_intr_handler_default(void *arg)
|
|
{
|
|
i2s_obj_t *p_i2s = (i2s_obj_t *) arg;
|
|
uint32_t status = i2s_hal_get_intr_status(&(p_i2s->hal));
|
|
if (status == 0) {
|
|
//Avoid spurious interrupt
|
|
return;
|
|
}
|
|
|
|
i2s_event_t i2s_event;
|
|
int dummy;
|
|
portBASE_TYPE need_awoke = 0;
|
|
portBASE_TYPE tmp = 0;
|
|
uint32_t finish_desc = 0;
|
|
if ((status & I2S_LL_EVENT_TX_DSCR_ERR) || (status & I2S_LL_EVENT_RX_DSCR_ERR)) {
|
|
ESP_EARLY_LOGE(TAG, "dma error, interrupt status: 0x%08x", status);
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_DMA_ERROR;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->i2s_queue)) {
|
|
xQueueReceiveFromISR(p_i2s->i2s_queue, &dummy, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
|
|
if ((status & I2S_LL_EVENT_TX_EOF) && p_i2s->tx) {
|
|
i2s_hal_get_out_eof_des_addr(&(p_i2s->hal), &finish_desc);
|
|
i2s_event.size = ((lldesc_t *)finish_desc)->size;
|
|
// All buffers are empty. This means we have an underflow on our hands.
|
|
if (xQueueIsQueueFullFromISR(p_i2s->tx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->tx->queue, &dummy, &tmp);
|
|
need_awoke |= tmp;
|
|
// See if tx descriptor needs to be auto cleared:
|
|
// This will avoid any kind of noise that may get introduced due to transmission
|
|
// of previous data from tx descriptor on I2S line.
|
|
if (p_i2s->tx_desc_auto_clear == true) {
|
|
memset((void *) dummy, 0, p_i2s->tx->buf_size);
|
|
}
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_TX_Q_OVF;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
xQueueSendFromISR(p_i2s->tx->queue, &(((lldesc_t *)finish_desc)->buf), &tmp);
|
|
need_awoke |= tmp;
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_TX_DONE;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
|
|
if ((status & I2S_LL_EVENT_RX_EOF) && p_i2s->rx) {
|
|
// All buffers are full. This means we have an overflow.
|
|
i2s_hal_get_in_eof_des_addr(&(p_i2s->hal), &finish_desc);
|
|
i2s_event.size = ((lldesc_t *)finish_desc)->size;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->rx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->rx->queue, &dummy, &tmp);
|
|
need_awoke |= tmp;
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_RX_Q_OVF;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
xQueueSendFromISR(p_i2s->rx->queue, &(((lldesc_t *)finish_desc)->buf), &tmp);
|
|
need_awoke |= tmp;
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_RX_DONE;
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &tmp);
|
|
need_awoke |= tmp;
|
|
}
|
|
}
|
|
i2s_hal_clear_intr_status(&(p_i2s->hal), status);
|
|
|
|
if (need_awoke == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static esp_err_t i2s_dma_intr_init(i2s_port_t i2s_num, int intr_flag)
|
|
{
|
|
#if SOC_GDMA_SUPPORTED
|
|
/* Set GDMA trigger module */
|
|
gdma_trigger_t trig = {.periph = GDMA_TRIG_PERIPH_I2S};
|
|
|
|
switch (i2s_num) {
|
|
#if SOC_I2S_NUM > 1
|
|
case I2S_NUM_1:
|
|
trig.instance_id = SOC_GDMA_TRIG_PERIPH_I2S1;
|
|
break;
|
|
#endif
|
|
default:
|
|
trig.instance_id = SOC_GDMA_TRIG_PERIPH_I2S0;
|
|
break;
|
|
}
|
|
|
|
/* Set GDMA config */
|
|
gdma_channel_alloc_config_t dma_cfg = {};
|
|
if ( p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
dma_cfg.direction = GDMA_CHANNEL_DIRECTION_TX;
|
|
/* Register a new GDMA tx channel */
|
|
ESP_RETURN_ON_ERROR(gdma_new_channel(&dma_cfg, &p_i2s[i2s_num]->tx_dma_chan), TAG, "Register tx dma channel error");
|
|
ESP_RETURN_ON_ERROR(gdma_connect(p_i2s[i2s_num]->tx_dma_chan, trig), TAG, "Connect tx dma channel error");
|
|
gdma_tx_event_callbacks_t cb = {.on_trans_eof = i2s_dma_tx_callback};
|
|
/* Set callback function for GDMA, the interrupt is triggered by GDMA, then the GDMA ISR will call the callback function */
|
|
gdma_register_tx_event_callbacks(p_i2s[i2s_num]->tx_dma_chan, &cb, p_i2s[i2s_num]);
|
|
}
|
|
if ( p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
dma_cfg.direction = GDMA_CHANNEL_DIRECTION_RX;
|
|
/* Register a new GDMA rx channel */
|
|
ESP_RETURN_ON_ERROR(gdma_new_channel(&dma_cfg, &p_i2s[i2s_num]->rx_dma_chan), TAG, "Register rx dma channel error");
|
|
ESP_RETURN_ON_ERROR(gdma_connect(p_i2s[i2s_num]->rx_dma_chan, trig), TAG, "Connect rx dma channel error");
|
|
gdma_rx_event_callbacks_t cb = {.on_recv_eof = i2s_dma_rx_callback};
|
|
/* Set callback function for GDMA, the interrupt is triggered by GDMA, then the GDMA ISR will call the callback function */
|
|
gdma_register_rx_event_callbacks(p_i2s[i2s_num]->rx_dma_chan, &cb, p_i2s[i2s_num]);
|
|
}
|
|
#else
|
|
/* Initial I2S module interrupt */
|
|
ESP_RETURN_ON_ERROR(esp_intr_alloc(i2s_periph_signal[i2s_num].irq, intr_flag, i2s_intr_handler_default, p_i2s[i2s_num], &p_i2s[i2s_num]->i2s_isr_handle), TAG, "Register I2S Interrupt error");
|
|
#endif // SOC_GDMA_SUPPORTED
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void i2s_tx_reset(i2s_port_t i2s_num)
|
|
{
|
|
p_i2s[i2s_num]->tx->curr_ptr = NULL;
|
|
p_i2s[i2s_num]->tx->rw_pos = 0;
|
|
i2s_hal_tx_reset(&(p_i2s[i2s_num]->hal));
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_reset(p_i2s[i2s_num]->tx_dma_chan);
|
|
#else
|
|
i2s_hal_tx_reset_dma(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
i2s_hal_tx_reset_fifo(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
|
|
/**
|
|
* @brief I2S rx reset
|
|
*
|
|
* @param i2s_num I2S device number
|
|
*/
|
|
static void i2s_rx_reset(i2s_port_t i2s_num)
|
|
{
|
|
p_i2s[i2s_num]->rx->curr_ptr = NULL;
|
|
p_i2s[i2s_num]->rx->rw_pos = 0;
|
|
i2s_hal_rx_reset(&(p_i2s[i2s_num]->hal));
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_reset(p_i2s[i2s_num]->rx_dma_chan);
|
|
#else
|
|
i2s_hal_rx_reset_dma(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
i2s_hal_rx_reset_fifo(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
|
|
static void i2s_tx_start(i2s_port_t i2s_num)
|
|
{
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_start(p_i2s[i2s_num]->tx_dma_chan, (uint32_t) p_i2s[i2s_num]->tx->desc[0]);
|
|
#else
|
|
i2s_hal_tx_enable_dma(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_tx_enable_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_tx_start_link(&(p_i2s[i2s_num]->hal), (uint32_t) p_i2s[i2s_num]->tx->desc[0]);
|
|
#endif
|
|
i2s_hal_tx_start(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
|
|
static void i2s_rx_start(i2s_port_t i2s_num)
|
|
{
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_start(p_i2s[i2s_num]->rx_dma_chan, (uint32_t) p_i2s[i2s_num]->rx->desc[0]);
|
|
#else
|
|
i2s_hal_rx_enable_dma(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_rx_enable_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_rx_start_link(&(p_i2s[i2s_num]->hal), (uint32_t) p_i2s[i2s_num]->rx->desc[0]);
|
|
#endif
|
|
i2s_hal_rx_start(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
|
|
static void i2s_tx_stop(i2s_port_t i2s_num)
|
|
{
|
|
i2s_hal_tx_stop(&(p_i2s[i2s_num]->hal));
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_stop(p_i2s[i2s_num]->tx_dma_chan);
|
|
#else
|
|
i2s_hal_tx_stop_link(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_tx_disable_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_tx_disable_dma(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
}
|
|
|
|
static void i2s_rx_stop(i2s_port_t i2s_num)
|
|
{
|
|
i2s_hal_rx_stop(&(p_i2s[i2s_num]->hal));
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_stop(p_i2s[i2s_num]->rx_dma_chan);
|
|
#else
|
|
i2s_hal_rx_stop_link(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_rx_disable_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_rx_disable_dma(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
}
|
|
|
|
esp_err_t i2s_start(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
//start DMA link
|
|
I2S_ENTER_CRITICAL(i2s_num);
|
|
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_tx_reset(i2s_num);
|
|
i2s_tx_start(i2s_num);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_rx_reset(i2s_num);
|
|
i2s_rx_start(i2s_num);
|
|
}
|
|
#if !SOC_GDMA_SUPPORTED
|
|
esp_intr_enable(p_i2s[i2s_num]->i2s_isr_handle);
|
|
#endif
|
|
I2S_EXIT_CRITICAL(i2s_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_stop(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
I2S_ENTER_CRITICAL(i2s_num);
|
|
#if !SOC_GDMA_SUPPORTED
|
|
esp_intr_disable(p_i2s[i2s_num]->i2s_isr_handle);
|
|
#endif
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_tx_stop(i2s_num);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_rx_stop(i2s_num);
|
|
}
|
|
#if !SOC_GDMA_SUPPORTED
|
|
i2s_hal_clear_intr_status(&(p_i2s[i2s_num]->hal), I2S_INTR_MAX);
|
|
#endif
|
|
I2S_EXIT_CRITICAL(i2s_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*-------------------------------------------------------------
|
|
I2S buffer operation
|
|
-------------------------------------------------------------*/
|
|
static inline uint32_t i2s_get_buf_size(i2s_port_t i2s_num)
|
|
{
|
|
i2s_hal_slot_config_t *slot_cfg = &p_i2s[i2s_num]->slot_cfg;
|
|
/* Calculate bytes per sample, align to 16 bit */
|
|
uint32_t bytes_per_sample = ((slot_cfg->data_bit_width + 15) / 16) * 2;
|
|
/* The DMA buffer limitation is 4092 bytes */
|
|
uint32_t bytes_per_frame = bytes_per_sample * p_i2s[i2s_num]->active_slot;
|
|
p_i2s[i2s_num]->dma_frame_num = (p_i2s[i2s_num]->dma_frame_num * bytes_per_frame > I2S_DMA_BUFFER_MAX_SIZE) ?
|
|
I2S_DMA_BUFFER_MAX_SIZE / bytes_per_frame : p_i2s[i2s_num]->dma_frame_num;
|
|
return p_i2s[i2s_num]->dma_frame_num * bytes_per_frame;
|
|
}
|
|
|
|
static esp_err_t i2s_delete_dma_buffer(i2s_port_t i2s_num, i2s_dma_t *dma_obj)
|
|
{
|
|
ESP_RETURN_ON_FALSE(dma_obj, ESP_ERR_INVALID_ARG, TAG, "I2S DMA object can't be NULL");
|
|
uint32_t buf_cnt = p_i2s[i2s_num]->dma_desc_num;
|
|
/* Loop to destroy every descriptor and buffer */
|
|
for (int cnt = 0; cnt < buf_cnt; cnt++) {
|
|
if (dma_obj->desc && dma_obj->desc[cnt]) {
|
|
free(dma_obj->desc[cnt]);
|
|
dma_obj->desc[cnt] = NULL;
|
|
}
|
|
if (dma_obj->buf && dma_obj->buf[cnt]) {
|
|
free(dma_obj->buf[cnt]);
|
|
dma_obj->buf[cnt] = NULL;
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_alloc_dma_buffer(i2s_port_t i2s_num, i2s_dma_t *dma_obj)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
ESP_GOTO_ON_FALSE(dma_obj, ESP_ERR_INVALID_ARG, err, TAG, "I2S DMA object can't be NULL");
|
|
|
|
uint32_t buf_cnt = p_i2s[i2s_num]->dma_desc_num;
|
|
for (int cnt = 0; cnt < buf_cnt; cnt++) {
|
|
/* Allocate DMA buffer */
|
|
dma_obj->buf[cnt] = (char *) heap_caps_calloc(dma_obj->buf_size, sizeof(char), MALLOC_CAP_DMA);
|
|
ESP_GOTO_ON_FALSE(dma_obj->buf[cnt], ESP_ERR_NO_MEM, err, TAG, "Error malloc dma buffer");
|
|
/* Initialize DMA buffer to 0 */
|
|
memset(dma_obj->buf[cnt], 0, dma_obj->buf_size);
|
|
|
|
/* Allocate DMA descpriptor */
|
|
dma_obj->desc[cnt] = (lldesc_t *) heap_caps_calloc(1, sizeof(lldesc_t), MALLOC_CAP_DMA);
|
|
ESP_GOTO_ON_FALSE(dma_obj->desc[cnt], ESP_ERR_NO_MEM, err, TAG, "Error malloc dma description entry");
|
|
}
|
|
/* DMA descriptor must be initialize after all descriptor has been created, otherwise they can't be linked together as a chain */
|
|
for (int cnt = 0; cnt < buf_cnt; cnt++) {
|
|
/* Initialize DMA descriptor */
|
|
dma_obj->desc[cnt]->owner = 1;
|
|
dma_obj->desc[cnt]->eof = 1;
|
|
dma_obj->desc[cnt]->sosf = 0;
|
|
dma_obj->desc[cnt]->length = dma_obj->buf_size;
|
|
dma_obj->desc[cnt]->size = dma_obj->buf_size;
|
|
dma_obj->desc[cnt]->buf = (uint8_t *) dma_obj->buf[cnt];
|
|
dma_obj->desc[cnt]->offset = 0;
|
|
/* Link to the next descriptor */
|
|
dma_obj->desc[cnt]->empty = (uint32_t)((cnt < (buf_cnt - 1)) ? (dma_obj->desc[cnt + 1]) : dma_obj->desc[0]);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_ll_rx_set_eof_num(p_i2s[i2s_num]->hal.dev, dma_obj->buf_size);
|
|
}
|
|
ESP_LOGD(TAG, "DMA Malloc info, datalen=blocksize=%d, dma_desc_num=%"PRIu32, dma_obj->buf_size, buf_cnt);
|
|
return ESP_OK;
|
|
err:
|
|
/* Delete DMA buffer if failed to allocate memory */
|
|
i2s_delete_dma_buffer(i2s_num, dma_obj);
|
|
return ret;
|
|
}
|
|
|
|
static esp_err_t i2s_realloc_dma_buffer(i2s_port_t i2s_num, i2s_dma_t *dma_obj)
|
|
{
|
|
ESP_RETURN_ON_FALSE(dma_obj, ESP_ERR_INVALID_ARG, TAG, "I2S DMA object can't be NULL");
|
|
|
|
/* Destroy old dma descriptor and buffer */
|
|
i2s_delete_dma_buffer(i2s_num, dma_obj);
|
|
/* Alloc new dma descriptor and buffer */
|
|
ESP_RETURN_ON_ERROR(i2s_alloc_dma_buffer(i2s_num, dma_obj), TAG, "Failed to allocate dma buffer");
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_destroy_dma_object(i2s_port_t i2s_num, i2s_dma_t **dma)
|
|
{
|
|
/* Check if DMA truely need destroy */
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_ERR_INVALID_ARG, TAG, "I2S not initialized yet");
|
|
if (!(*dma)) {
|
|
return ESP_OK;
|
|
}
|
|
/* Destroy every descriptor and buffer */
|
|
i2s_delete_dma_buffer(i2s_num, (*dma));
|
|
/* Destroy descriptor pointer */
|
|
if ((*dma)->desc) {
|
|
free((*dma)->desc);
|
|
(*dma)->desc = NULL;
|
|
}
|
|
/* Destroy buffer pointer */
|
|
if ((*dma)->buf) {
|
|
free((*dma)->buf);
|
|
(*dma)->buf = NULL;
|
|
}
|
|
/* Delete DMA mux */
|
|
vSemaphoreDelete((*dma)->mux);
|
|
/* Delete DMA queue */
|
|
vQueueDelete((*dma)->queue);
|
|
/* Free DMA structure */
|
|
free(*dma);
|
|
*dma = NULL;
|
|
ESP_LOGD(TAG, "DMA queue destroyed");
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_create_dma_object(i2s_port_t i2s_num, i2s_dma_t **dma)
|
|
{
|
|
ESP_RETURN_ON_FALSE(dma, ESP_ERR_INVALID_ARG, TAG, "DMA object secondary pointer is NULL");
|
|
ESP_RETURN_ON_FALSE((*dma == NULL), ESP_ERR_INVALID_ARG, TAG, "DMA object has been created");
|
|
uint32_t buf_cnt = p_i2s[i2s_num]->dma_desc_num;
|
|
/* Allocate new DMA structure */
|
|
*dma = (i2s_dma_t *) calloc(1, sizeof(i2s_dma_t));
|
|
ESP_RETURN_ON_FALSE(*dma, ESP_ERR_NO_MEM, TAG, "DMA object allocate failed");
|
|
/* Allocate DMA buffer poiter */
|
|
(*dma)->buf = (char **)heap_caps_calloc(buf_cnt, sizeof(char *), MALLOC_CAP_DMA);
|
|
if (!(*dma)->buf) {
|
|
goto err;
|
|
}
|
|
/* Allocate secondary pointer of DMA descriptor chain */
|
|
(*dma)->desc = (lldesc_t **)heap_caps_calloc(buf_cnt, sizeof(lldesc_t *), MALLOC_CAP_DMA);
|
|
if (!(*dma)->desc) {
|
|
goto err;
|
|
}
|
|
/* Create queue and mutex */
|
|
(*dma)->queue = xQueueCreate(buf_cnt - 1, sizeof(char *));
|
|
if (!(*dma)->queue) {
|
|
goto err;
|
|
}
|
|
(*dma)->mux = xSemaphoreCreateMutex();
|
|
if (!(*dma)->mux) {
|
|
goto err;
|
|
}
|
|
|
|
return ESP_OK;
|
|
err:
|
|
ESP_LOGE(TAG, "I2S DMA object create failed, preparing to uninstall");
|
|
/* Destroy DMA queue if failed to allocate memory */
|
|
i2s_destroy_dma_object(i2s_num, dma);
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
|
|
/*-------------------------------------------------------------
|
|
I2S clock operation
|
|
-------------------------------------------------------------*/
|
|
static uint32_t i2s_config_source_clock(i2s_port_t i2s_num, bool use_apll, uint32_t mclk)
|
|
{
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (use_apll) {
|
|
/* Calculate the expected APLL */
|
|
int div = (int)((SOC_APLL_MIN_HZ / mclk) + 1);
|
|
/* apll_freq = mclk * div
|
|
* when div = 1, hardware will still divide 2
|
|
* when div = 0, the final mclk will be unpredictable
|
|
* So the div here should be at least 2 */
|
|
div = div < 2 ? 2 : div;
|
|
uint32_t expt_freq = mclk * div;
|
|
/* Set APLL coefficients to the given frequency */
|
|
uint32_t real_freq = 0;
|
|
esp_err_t ret = periph_rtc_apll_freq_set(expt_freq, &real_freq);
|
|
if (ret == ESP_ERR_INVALID_ARG) {
|
|
ESP_LOGE(TAG, "set APLL coefficients failed");
|
|
return 0;
|
|
}
|
|
if (ret == ESP_ERR_INVALID_STATE) {
|
|
ESP_LOGW(TAG, "APLL is occupied already, it is working at %"PRIu32" Hz", real_freq);
|
|
}
|
|
ESP_LOGD(TAG, "APLL expected frequency is %"PRIu32" Hz, real frequency is %"PRIu32" Hz", expt_freq, real_freq);
|
|
/* In APLL mode, there is no sclk but only mclk, so return 0 here to indicate APLL mode */
|
|
return real_freq;
|
|
}
|
|
return I2S_LL_BASE_CLK;
|
|
#else
|
|
if (use_apll) {
|
|
ESP_LOGW(TAG, "APLL not supported on current chip, use I2S_CLK_SRC_DEFAULT as default clock source");
|
|
}
|
|
return I2S_LL_BASE_CLK;
|
|
#endif
|
|
}
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC || SOC_I2S_SUPPORTS_DAC
|
|
static esp_err_t i2s_calculate_adc_dac_clock(int i2s_num, i2s_hal_clock_info_t *clk_info)
|
|
{
|
|
/* For ADC/DAC mode, the built-in ADC/DAC is driven by 'mclk' instead of 'bclk'
|
|
* 'bclk' should be fixed to the double of sample rate
|
|
* 'bclk_div' is the real coefficient that affects the slot bit */
|
|
i2s_clk_config_t *clk_cfg = &p_i2s[i2s_num]->clk_cfg;
|
|
i2s_hal_slot_config_t *slot_cfg = &p_i2s[i2s_num]->slot_cfg;
|
|
uint32_t slot_bits = slot_cfg->slot_bit_width;
|
|
/* Set I2S bit clock */
|
|
clk_info->bclk = clk_cfg->sample_rate_hz * I2S_LL_AD_BCK_FACTOR;
|
|
/* Set I2S bit clock default division */
|
|
clk_info->bclk_div = slot_bits;
|
|
/* If fixed_mclk and use_apll are set, use fixed_mclk as mclk frequency, otherwise calculate by mclk = bclk * bclk_div */
|
|
clk_info->mclk = (p_i2s[i2s_num]->use_apll && p_i2s[i2s_num]->fixed_mclk) ?
|
|
p_i2s[i2s_num]->fixed_mclk : clk_info->bclk * clk_info->bclk_div;
|
|
/* Calculate bclk_div = mclk / bclk */
|
|
clk_info->bclk_div = clk_info->mclk / clk_info->bclk;
|
|
/* Get I2S system clock by config source clock */
|
|
clk_info->sclk = i2s_config_source_clock(i2s_num, p_i2s[i2s_num]->use_apll, clk_info->mclk);
|
|
/* Get I2S master clock rough division, later will calculate the fine division parameters in HAL */
|
|
clk_info->mclk_div = clk_info->sclk / clk_info->mclk;
|
|
|
|
/* Check if the configuration is correct */
|
|
ESP_RETURN_ON_FALSE(clk_info->sclk / (float)clk_info->mclk > 1.99, ESP_ERR_INVALID_ARG, TAG, "sample rate is too large, the mclk division is below minimum value 2");
|
|
ESP_RETURN_ON_FALSE(clk_info->mclk_div < 256, ESP_ERR_INVALID_ARG, TAG, "sample rate is too small, the mclk division exceed the maximum value 255");
|
|
|
|
return ESP_OK;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_ADC || SOC_I2S_SUPPORTS_DAC
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
static esp_err_t i2s_calculate_pdm_tx_clock(int i2s_num, i2s_hal_clock_info_t *clk_info)
|
|
{
|
|
i2s_clk_config_t *clk_cfg = &p_i2s[i2s_num]->clk_cfg;
|
|
|
|
int fp = clk_cfg->up_sample_fp;
|
|
int fs = clk_cfg->up_sample_fs;
|
|
/* Set I2S bit clock */
|
|
clk_info->bclk = clk_cfg->sample_rate_hz * I2S_LL_PDM_BCK_FACTOR * fp / fs;
|
|
/* Set I2S bit clock default division */
|
|
clk_info->bclk_div = 8;
|
|
/* If fixed_mclk and use_apll are set, use fixed_mclk as mclk frequency, otherwise calculate by mclk = sample_rate_hz * multiple */
|
|
clk_info->mclk = (p_i2s[i2s_num]->use_apll && p_i2s[i2s_num]->fixed_mclk) ?
|
|
p_i2s[i2s_num]->fixed_mclk : clk_info->bclk * clk_info->bclk_div;
|
|
/* Calculate bclk_div = mclk / bclk */
|
|
clk_info->bclk_div = clk_info->mclk / clk_info->bclk;
|
|
/* Get I2S system clock by config source clock */
|
|
clk_info->sclk = i2s_config_source_clock(i2s_num, p_i2s[i2s_num]->use_apll, clk_info->mclk);
|
|
/* Get I2S master clock rough division, later will calculate the fine division parameters in HAL */
|
|
clk_info->mclk_div = clk_info->sclk / clk_info->mclk;
|
|
|
|
/* Check if the configuration is correct */
|
|
ESP_RETURN_ON_FALSE(clk_info->sclk / (float)clk_info->mclk > 1.99, ESP_ERR_INVALID_ARG, TAG, "sample rate is too large, the mclk division is below minimum value 2");
|
|
ESP_RETURN_ON_FALSE(clk_info->mclk_div < 256, ESP_ERR_INVALID_ARG, TAG, "sample rate is too small, the mclk division exceed the maximum value 255");
|
|
|
|
return ESP_OK;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM_TX
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
static esp_err_t i2s_calculate_pdm_rx_clock(int i2s_num, i2s_hal_clock_info_t *clk_info)
|
|
{
|
|
i2s_clk_config_t *clk_cfg = &p_i2s[i2s_num]->clk_cfg;
|
|
i2s_pdm_dsr_t dsr = clk_cfg->dn_sample_mode;
|
|
/* Set I2S bit clock */
|
|
clk_info->bclk = clk_cfg->sample_rate_hz * I2S_LL_PDM_BCK_FACTOR * (dsr == I2S_PDM_DSR_16S ? 2 : 1);
|
|
/* Set I2S bit clock default division */
|
|
clk_info->bclk_div = 8;
|
|
/* If fixed_mclk and use_apll are set, use fixed_mclk as mclk frequency, otherwise calculate by mclk = sample_rate_hz * multiple */
|
|
clk_info->mclk = (p_i2s[i2s_num]->use_apll && p_i2s[i2s_num]->fixed_mclk) ?
|
|
p_i2s[i2s_num]->fixed_mclk : clk_info->bclk * clk_info->bclk_div;
|
|
/* Calculate bclk_div = mclk / bclk */
|
|
clk_info->bclk_div = clk_info->mclk / clk_info->bclk;
|
|
/* Get I2S system clock by config source clock */
|
|
clk_info->sclk = i2s_config_source_clock(i2s_num, p_i2s[i2s_num]->use_apll, clk_info->mclk);
|
|
/* Get I2S master clock rough division, later will calculate the fine division parameters in HAL */
|
|
clk_info->mclk_div = clk_info->sclk / clk_info->mclk;
|
|
|
|
/* Check if the configuration is correct */
|
|
ESP_RETURN_ON_FALSE(clk_info->sclk / (float)clk_info->mclk > 1.99, ESP_ERR_INVALID_ARG, TAG, "sample rate is too large, the mclk division is below minimum value 2");
|
|
ESP_RETURN_ON_FALSE(clk_info->mclk_div < 256, ESP_ERR_INVALID_ARG, TAG, "sample rate is too small, the mclk division exceed the maximum value 255");
|
|
|
|
return ESP_OK;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM_RX
|
|
static esp_err_t i2s_calculate_common_clock(int i2s_num, i2s_hal_clock_info_t *clk_info)
|
|
{
|
|
i2s_clk_config_t *clk_cfg = &p_i2s[i2s_num]->clk_cfg;
|
|
i2s_hal_slot_config_t *slot_cfg = &p_i2s[i2s_num]->slot_cfg;
|
|
uint32_t rate = clk_cfg->sample_rate_hz;
|
|
uint32_t slot_num = p_i2s[i2s_num]->total_slot < 2 ? 2 : p_i2s[i2s_num]->total_slot;
|
|
uint32_t slot_bits = slot_cfg->slot_bit_width;
|
|
/* Calculate multiple */
|
|
if (p_i2s[i2s_num]->role == I2S_ROLE_MASTER) {
|
|
clk_info->bclk = rate * slot_num * slot_bits;
|
|
clk_info->mclk = rate * clk_cfg->mclk_multiple;
|
|
clk_info->bclk_div = clk_info->mclk / clk_info->bclk;
|
|
} else {
|
|
/* For slave mode, mclk >= bclk * 8, so fix bclk_div to 8 first */
|
|
clk_info->bclk_div = 8;
|
|
clk_info->bclk = rate * slot_num * slot_bits;
|
|
clk_info->mclk = clk_info->bclk * clk_info->bclk_div;
|
|
}
|
|
/* Get I2S system clock by config source clock */
|
|
clk_info->sclk = i2s_config_source_clock(i2s_num, p_i2s[i2s_num]->use_apll, clk_info->mclk);
|
|
/* Get I2S master clock rough division, later will calculate the fine division parameters in HAL */
|
|
clk_info->mclk_div = clk_info->sclk / clk_info->mclk;
|
|
|
|
/* Check if the configuration is correct */
|
|
ESP_RETURN_ON_FALSE(clk_info->mclk <= clk_info->sclk, ESP_ERR_INVALID_ARG, TAG, "sample rate is too large");
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
static esp_err_t i2s_calculate_clock(i2s_port_t i2s_num, i2s_hal_clock_info_t *clk_info)
|
|
{
|
|
/* Calculate clock for ADC/DAC mode */
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
if ((int)p_i2s[i2s_num]->mode == I2S_COMM_MODE_ADC_DAC) {
|
|
ESP_RETURN_ON_ERROR(i2s_calculate_adc_dac_clock(i2s_num, clk_info), TAG, "ADC/DAC clock calculate failed");
|
|
return ESP_OK;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_ADC
|
|
|
|
/* Calculate clock for PDM mode */
|
|
#if SOC_I2S_SUPPORTS_PDM
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_PDM) {
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
ESP_RETURN_ON_ERROR(i2s_calculate_pdm_tx_clock(i2s_num, clk_info), TAG, "PDM TX clock calculate failed");
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM_TX
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
ESP_RETURN_ON_ERROR(i2s_calculate_pdm_rx_clock(i2s_num, clk_info), TAG, "PDM RX clock calculate failed");
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM_RX
|
|
return ESP_OK;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM_TX || SOC_I2S_SUPPORTS_PDM_RX
|
|
|
|
/* Calculate clock for common mode */
|
|
ESP_RETURN_ON_ERROR(i2s_calculate_common_clock(i2s_num, clk_info), TAG, "Common clock calculate failed");
|
|
ESP_LOGD(TAG, "[sclk] %"PRIu32" [mclk] %"PRIu32" [mclk_div] %d [bclk] %"PRIu32" [bclk_div] %d",
|
|
clk_info->sclk, clk_info->mclk, clk_info->mclk_div, clk_info->bclk, clk_info->bclk_div);
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*-------------------------------------------------------------
|
|
I2S configuration
|
|
-------------------------------------------------------------*/
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
static void i2s_dac_set_slot_legacy(void)
|
|
{
|
|
i2s_dev_t *dev = p_i2s[0]->hal.dev;
|
|
i2s_hal_slot_config_t *slot_cfg = &p_i2s[0]->slot_cfg;
|
|
|
|
i2s_ll_tx_reset(dev);
|
|
i2s_ll_tx_set_slave_mod(dev, false);
|
|
i2s_ll_tx_set_sample_bit(dev, slot_cfg->slot_bit_width, slot_cfg->data_bit_width);
|
|
i2s_ll_tx_enable_mono_mode(dev, slot_cfg->slot_mode == I2S_SLOT_MODE_MONO);
|
|
i2s_ll_tx_enable_msb_shift(dev, false);
|
|
i2s_ll_tx_set_ws_width(dev, slot_cfg->slot_bit_width);
|
|
i2s_ll_tx_enable_msb_right(dev, false);
|
|
i2s_ll_tx_enable_right_first(dev, true);
|
|
/* Should always enable fifo */
|
|
i2s_ll_tx_force_enable_fifo_mod(dev, true);
|
|
}
|
|
|
|
esp_err_t i2s_set_dac_mode(i2s_dac_mode_t dac_mode)
|
|
{
|
|
ESP_RETURN_ON_FALSE((dac_mode < I2S_DAC_CHANNEL_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s dac mode error");
|
|
if (dac_mode == I2S_DAC_CHANNEL_DISABLE) {
|
|
dac_output_disable(DAC_CHANNEL_1);
|
|
dac_output_disable(DAC_CHANNEL_2);
|
|
dac_i2s_disable();
|
|
} else {
|
|
dac_i2s_enable();
|
|
}
|
|
|
|
if (dac_mode & I2S_DAC_CHANNEL_RIGHT_EN) {
|
|
//DAC1, right channel
|
|
dac_output_enable(DAC_CHANNEL_1);
|
|
}
|
|
if (dac_mode & I2S_DAC_CHANNEL_LEFT_EN) {
|
|
//DAC2, left channel
|
|
dac_output_enable(DAC_CHANNEL_2);
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void i2s_adc_set_slot_legacy(void)
|
|
{
|
|
i2s_dev_t *dev = p_i2s[0]->hal.dev;
|
|
i2s_hal_slot_config_t *slot_cfg = &p_i2s[0]->slot_cfg;
|
|
// When ADC/DAC are installed as duplex mode, ADC will share the WS and BCLK clock by working in slave mode
|
|
i2s_ll_rx_set_slave_mod(dev, false);
|
|
i2s_ll_rx_set_sample_bit(dev, slot_cfg->slot_bit_width, slot_cfg->data_bit_width);
|
|
i2s_ll_rx_enable_mono_mode(dev, true); // ADC should use mono mode to meet the sample rate
|
|
i2s_ll_rx_enable_msb_shift(dev, false);
|
|
i2s_ll_rx_set_ws_width(dev, slot_cfg->slot_bit_width);
|
|
i2s_ll_rx_enable_msb_right(dev, false);
|
|
i2s_ll_rx_enable_right_first(dev, false);
|
|
/* Should always enable fifo */
|
|
i2s_ll_rx_force_enable_fifo_mod(dev, true);
|
|
}
|
|
|
|
static int _i2s_adc_unit = -1;
|
|
static int _i2s_adc_channel = -1;
|
|
|
|
static esp_err_t _i2s_adc_mode_recover(void)
|
|
{
|
|
ESP_RETURN_ON_FALSE(((_i2s_adc_unit != -1) && (_i2s_adc_channel != -1)), ESP_ERR_INVALID_ARG, TAG, "i2s ADC recover error, not initialized...");
|
|
return adc_i2s_mode_init(_i2s_adc_unit, _i2s_adc_channel);
|
|
}
|
|
|
|
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel)
|
|
{
|
|
ESP_RETURN_ON_FALSE((adc_unit < ADC_UNIT_2), ESP_ERR_INVALID_ARG, TAG, "i2s ADC unit error, only support ADC1 for now");
|
|
// For now, we only support SAR ADC1.
|
|
_i2s_adc_unit = adc_unit;
|
|
_i2s_adc_channel = adc_channel;
|
|
return adc_i2s_mode_init(adc_unit, adc_channel);
|
|
}
|
|
|
|
esp_err_t i2s_adc_enable(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num] != NULL), ESP_ERR_INVALID_STATE, TAG, "Not initialized yet");
|
|
ESP_RETURN_ON_FALSE(((int)p_i2s[i2s_num]->mode == I2S_COMM_MODE_ADC_DAC) && (p_i2s[i2s_num]->dir & I2S_DIR_RX),
|
|
ESP_ERR_INVALID_STATE, TAG, "i2s built-in adc not enabled");
|
|
|
|
adc1_dma_mode_acquire();
|
|
_i2s_adc_mode_recover();
|
|
i2s_rx_reset(i2s_num);
|
|
return i2s_start(i2s_num);
|
|
}
|
|
|
|
esp_err_t i2s_adc_disable(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num] != NULL), ESP_ERR_INVALID_STATE, TAG, "Not initialized yet");
|
|
ESP_RETURN_ON_FALSE(((int)p_i2s[i2s_num]->mode == I2S_COMM_MODE_ADC_DAC) && (p_i2s[i2s_num]->dir & I2S_DIR_RX),
|
|
ESP_ERR_INVALID_STATE, TAG, "i2s built-in adc not enabled");
|
|
|
|
i2s_hal_rx_stop(&(p_i2s[i2s_num]->hal));
|
|
adc1_lock_release();
|
|
return ESP_OK;
|
|
}
|
|
#endif
|
|
|
|
static esp_err_t i2s_check_cfg_validity(i2s_port_t i2s_num, const i2s_config_t *cfg)
|
|
{
|
|
/* Step 1: Check the validity of input parameters */
|
|
/* Check the validity of i2s device number */
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num] == NULL, ESP_ERR_INVALID_STATE, TAG, "this i2s port is in use");
|
|
ESP_RETURN_ON_FALSE(cfg, ESP_ERR_INVALID_ARG, TAG, "I2S configuration must not be NULL");
|
|
/* Check the size of DMA buffer */
|
|
ESP_RETURN_ON_FALSE((cfg->dma_desc_num >= 2 && cfg->dma_desc_num <= 128), ESP_ERR_INVALID_ARG, TAG, "I2S buffer count less than 128 and more than 2");
|
|
ESP_RETURN_ON_FALSE((cfg->dma_frame_num >= 8 && cfg->dma_frame_num <= 1024), ESP_ERR_INVALID_ARG, TAG, "I2S buffer length at most 1024 and more than 8");
|
|
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_TX || SOC_I2S_SUPPORTS_PDM_RX
|
|
/* Check PDM mode */
|
|
if (cfg->mode & I2S_MODE_PDM) {
|
|
ESP_RETURN_ON_FALSE(i2s_num == I2S_NUM_0, ESP_ERR_INVALID_ARG, TAG, "I2S PDM mode only support on I2S0");
|
|
#if !SOC_I2S_SUPPORTS_PDM_TX
|
|
ESP_RETURN_ON_FALSE(!(cfg->mode & I2S_MODE_TX), ESP_ERR_INVALID_ARG, TAG, "PDM does not support TX on this chip");
|
|
#endif // SOC_I2S_SUPPORTS_PDM_TX
|
|
#if !SOC_I2S_SUPPORTS_PDM_RX
|
|
ESP_RETURN_ON_FALSE(!(cfg->mode & I2S_MODE_RX), ESP_ERR_INVALID_ARG, TAG, "PDM does not support RX on this chip");
|
|
#endif // SOC_I2S_SUPPORTS_PDM_RX
|
|
}
|
|
#else
|
|
ESP_RETURN_ON_FALSE(!(cfg->mode & I2S_MODE_PDM), ESP_ERR_INVALID_ARG, TAG, "I2S PDM mode not supported on current chip");
|
|
#endif // SOC_I2S_SUPPORTS_PDM_TX || SOC_I2S_SUPPORTS_PDM_RX
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC || SOC_I2S_SUPPORTS_DAC
|
|
/* Check built-in ADC/DAC mode */
|
|
if (cfg->mode & (I2S_MODE_ADC_BUILT_IN | I2S_MODE_DAC_BUILT_IN)) {
|
|
ESP_RETURN_ON_FALSE(i2s_num == I2S_NUM_0, ESP_ERR_INVALID_ARG, TAG, "I2S built-in ADC/DAC only support on I2S0");
|
|
}
|
|
#else
|
|
/* Check the transmit/receive mode */
|
|
ESP_RETURN_ON_FALSE((cfg->mode & I2S_MODE_TX) || (cfg->mode & I2S_MODE_RX), ESP_ERR_INVALID_ARG, TAG, "I2S no TX/RX mode selected");
|
|
/* Check communication format */
|
|
ESP_RETURN_ON_FALSE(cfg->communication_format && (cfg->communication_format < I2S_COMM_FORMAT_STAND_MAX), ESP_ERR_INVALID_ARG, TAG, "invalid communication formats");
|
|
#endif // SOC_I2S_SUPPORTS_ADC || SOC_I2S_SUPPORTS_DAC
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void i2s_set_slot_legacy(i2s_port_t i2s_num)
|
|
{
|
|
bool is_tx_slave = p_i2s[i2s_num]->role == I2S_ROLE_SLAVE;
|
|
bool is_rx_slave = is_tx_slave;
|
|
if (p_i2s[i2s_num]->dir == (I2S_DIR_TX | I2S_DIR_RX)) {
|
|
i2s_ll_share_bck_ws(p_i2s[i2s_num]->hal.dev, true);
|
|
/* Since bck and ws are shared, only tx or rx can be master
|
|
Force to set rx as slave to avoid conflict of clock signal */
|
|
is_rx_slave = true;
|
|
} else {
|
|
i2s_ll_share_bck_ws(p_i2s[i2s_num]->hal.dev, false);
|
|
}
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_STD) {
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_hal_std_set_tx_slot(&(p_i2s[i2s_num]->hal), is_tx_slave, (i2s_hal_slot_config_t *)(&p_i2s[i2s_num]->slot_cfg) );
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_hal_std_set_rx_slot(&(p_i2s[i2s_num]->hal), is_rx_slave, (i2s_hal_slot_config_t *)(&p_i2s[i2s_num]->slot_cfg) );
|
|
}
|
|
}
|
|
#if SOC_I2S_SUPPORTS_PDM
|
|
else if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_PDM) {
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_hal_pdm_set_tx_slot(&(p_i2s[i2s_num]->hal), is_tx_slave, (i2s_hal_slot_config_t *)(&p_i2s[i2s_num]->slot_cfg) );
|
|
}
|
|
#endif
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_hal_pdm_set_rx_slot(&(p_i2s[i2s_num]->hal), is_rx_slave, (i2s_hal_slot_config_t *)(&p_i2s[i2s_num]->slot_cfg) );
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
else if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_TDM) {
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_hal_tdm_set_tx_slot(&(p_i2s[i2s_num]->hal), is_tx_slave, (i2s_hal_slot_config_t *)(&p_i2s[i2s_num]->slot_cfg) );
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_hal_tdm_set_rx_slot(&(p_i2s[i2s_num]->hal), is_rx_slave, (i2s_hal_slot_config_t *)(&p_i2s[i2s_num]->slot_cfg) );
|
|
}
|
|
}
|
|
#endif
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
else if ((int)p_i2s[i2s_num]->mode == I2S_COMM_MODE_ADC_DAC) {
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_dac_set_slot_legacy();
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_adc_set_slot_legacy();
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void i2s_set_clock_legacy(i2s_port_t i2s_num)
|
|
{
|
|
i2s_clk_config_t *clk_cfg = &p_i2s[i2s_num]->clk_cfg;
|
|
i2s_hal_clock_info_t clk_info;
|
|
i2s_calculate_clock(i2s_num, &clk_info);
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_hal_set_tx_clock(&(p_i2s[i2s_num]->hal), &clk_info, clk_cfg->clk_src);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_hal_set_rx_clock(&(p_i2s[i2s_num]->hal), &clk_info, clk_cfg->clk_src);
|
|
}
|
|
}
|
|
|
|
float i2s_get_clk(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
i2s_clk_config_t *clk_cfg = &p_i2s[i2s_num]->clk_cfg;
|
|
return (float)clk_cfg->sample_rate_hz;
|
|
}
|
|
|
|
esp_err_t i2s_set_clk(i2s_port_t i2s_num, uint32_t rate, uint32_t bits_cfg, i2s_channel_t ch)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_ERR_INVALID_ARG, TAG, "I2S%d has not installed yet", i2s_num);
|
|
|
|
/* Acquire the lock before stop i2s, otherwise reading/writing operation will stuck on receiving the message queue from interrupt */
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_TX) {
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, portMAX_DELAY);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_RX) {
|
|
xSemaphoreTake(p_i2s[i2s_num]->rx->mux, portMAX_DELAY);
|
|
}
|
|
|
|
/* Stop I2S */
|
|
i2s_stop(i2s_num);
|
|
|
|
i2s_clk_config_t *clk_cfg = &p_i2s[i2s_num]->clk_cfg;
|
|
i2s_hal_slot_config_t *slot_cfg = &p_i2s[i2s_num]->slot_cfg;
|
|
|
|
clk_cfg->sample_rate_hz = rate;
|
|
slot_cfg->data_bit_width = bits_cfg & 0xFFFF;
|
|
ESP_RETURN_ON_FALSE((slot_cfg->data_bit_width % 8 == 0), ESP_ERR_INVALID_ARG, TAG, "Invalid bits per sample");
|
|
slot_cfg->slot_bit_width = (bits_cfg >> 16) > slot_cfg->data_bit_width ?
|
|
(bits_cfg >> 16) : slot_cfg->data_bit_width;
|
|
ESP_RETURN_ON_FALSE((slot_cfg->slot_bit_width % 8 == 0), ESP_ERR_INVALID_ARG, TAG, "Invalid bits per channel");
|
|
ESP_RETURN_ON_FALSE(((int)slot_cfg->slot_bit_width <= (int)I2S_BITS_PER_SAMPLE_32BIT), ESP_ERR_INVALID_ARG, TAG, "Invalid bits per sample");
|
|
slot_cfg->slot_mode = ((ch & 0xFFFF) == I2S_CHANNEL_MONO) ? I2S_SLOT_MODE_MONO : I2S_SLOT_MODE_STEREO;
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_STD) {
|
|
if (slot_cfg->slot_mode == I2S_SLOT_MODE_MONO) {
|
|
if (slot_cfg->std.slot_mask == I2S_STD_SLOT_BOTH) {
|
|
slot_cfg->std.slot_mask = I2S_STD_SLOT_LEFT;
|
|
#if SOC_I2S_HW_VERSION_1
|
|
// Enable right first to get correct data sequence
|
|
slot_cfg->std.ws_pol = !slot_cfg->std.ws_pol;
|
|
#endif
|
|
}
|
|
} else {
|
|
slot_cfg->std.slot_mask = I2S_STD_SLOT_BOTH;
|
|
}
|
|
}
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_TDM) {
|
|
uint32_t slot_mask = ch >> 16;
|
|
if (slot_mask == 0) {
|
|
slot_mask = (slot_cfg->slot_mode == I2S_SLOT_MODE_MONO) ? 1 : 2;
|
|
}
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num]->total_slot >= (32 - __builtin_clz(slot_mask)), ESP_ERR_INVALID_ARG, TAG,
|
|
"The max channel number can't be greater than CH%"PRIu32, p_i2s[i2s_num]->total_slot);
|
|
p_i2s[i2s_num]->active_slot = __builtin_popcount(slot_mask);
|
|
} else
|
|
#endif
|
|
{
|
|
p_i2s[i2s_num]->active_slot = (slot_cfg->slot_mode == I2S_SLOT_MODE_MONO) ? 1 : 2;
|
|
}
|
|
|
|
i2s_set_slot_legacy(i2s_num);
|
|
i2s_set_clock_legacy(i2s_num);
|
|
|
|
uint32_t buf_size = i2s_get_buf_size(i2s_num);
|
|
bool need_realloc = buf_size != p_i2s[i2s_num]->last_buf_size;
|
|
|
|
if (need_realloc) {
|
|
esp_err_t ret = ESP_OK;
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
p_i2s[i2s_num]->tx->buf_size = buf_size;
|
|
ret = i2s_realloc_dma_buffer(i2s_num, p_i2s[i2s_num]->tx);
|
|
xQueueReset(p_i2s[i2s_num]->tx->queue);
|
|
ESP_RETURN_ON_ERROR(ret, TAG, "I2S%d tx DMA buffer malloc failed", i2s_num);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
p_i2s[i2s_num]->rx->buf_size = buf_size;
|
|
ret = i2s_realloc_dma_buffer(i2s_num, p_i2s[i2s_num]->rx);
|
|
xQueueReset(p_i2s[i2s_num]->rx->queue);
|
|
ESP_RETURN_ON_ERROR(ret, TAG, "I2S%d rx DMA buffer malloc failed", i2s_num);
|
|
}
|
|
}
|
|
/* Update last buffer size */
|
|
p_i2s[i2s_num]->last_buf_size = buf_size;
|
|
|
|
/* I2S start */
|
|
i2s_start(i2s_num);
|
|
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_TX) {
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_RX) {
|
|
xSemaphoreGive(p_i2s[i2s_num]->rx->mux);
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_set_sample_rates(i2s_port_t i2s_num, uint32_t rate)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
i2s_hal_slot_config_t *slot_cfg = &p_i2s[i2s_num]->slot_cfg;
|
|
uint32_t mask = 0;
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_TDM) {
|
|
mask = slot_cfg->tdm.slot_mask;
|
|
}
|
|
#endif
|
|
return i2s_set_clk(i2s_num, rate, slot_cfg->data_bit_width, slot_cfg->slot_mode | (mask << 16));
|
|
}
|
|
|
|
#if SOC_I2S_SUPPORTS_PCM
|
|
|
|
esp_err_t i2s_pcm_config(i2s_port_t i2s_num, const i2s_pcm_cfg_t *pcm_cfg)
|
|
{
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_FAIL, TAG, "i2s has not installed yet");
|
|
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_TX) {
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, portMAX_DELAY);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_RX) {
|
|
xSemaphoreTake(p_i2s[i2s_num]->rx->mux, portMAX_DELAY);
|
|
}
|
|
|
|
i2s_stop(i2s_num);
|
|
I2S_ENTER_CRITICAL(i2s_num);
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_ll_tx_set_pcm_type(p_i2s[i2s_num]->hal.dev, pcm_cfg->pcm_type);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_ll_rx_set_pcm_type(p_i2s[i2s_num]->hal.dev, pcm_cfg->pcm_type);
|
|
}
|
|
I2S_EXIT_CRITICAL(i2s_num);
|
|
i2s_start(i2s_num);
|
|
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_TX) {
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_MODE_RX) {
|
|
xSemaphoreGive(p_i2s[i2s_num]->rx->mux);
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
#endif
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
esp_err_t i2s_set_pdm_rx_down_sample(i2s_port_t i2s_num, i2s_pdm_dsr_t downsample)
|
|
{
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_FAIL, TAG, "i2s has not installed yet");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->mode == I2S_COMM_MODE_PDM), ESP_ERR_INVALID_ARG, TAG, "i2s mode is not PDM mode");
|
|
xSemaphoreTake(p_i2s[i2s_num]->rx->mux, portMAX_DELAY);
|
|
i2s_stop(i2s_num);
|
|
p_i2s[i2s_num]->clk_cfg.dn_sample_mode = downsample;
|
|
i2s_ll_rx_set_pdm_dsr(p_i2s[i2s_num]->hal.dev, downsample);
|
|
i2s_start(i2s_num);
|
|
xSemaphoreGive(p_i2s[i2s_num]->rx->mux);
|
|
return i2s_set_clk(i2s_num, p_i2s[i2s_num]->clk_cfg.sample_rate_hz, p_i2s[i2s_num]->slot_cfg.data_bit_width, p_i2s[i2s_num]->slot_cfg.slot_mode);
|
|
}
|
|
#endif
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
esp_err_t i2s_set_pdm_tx_up_sample(i2s_port_t i2s_num, const i2s_pdm_tx_upsample_cfg_t *upsample_cfg)
|
|
{
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_FAIL, TAG, "i2s has not installed yet");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->mode == I2S_COMM_MODE_PDM) && (p_i2s[i2s_num]->dir & I2S_DIR_TX),
|
|
ESP_ERR_INVALID_ARG, TAG, "i2s mode is not PDM mode");
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, portMAX_DELAY);
|
|
i2s_stop(i2s_num);
|
|
p_i2s[i2s_num]->clk_cfg.up_sample_fp = upsample_cfg->fp;
|
|
p_i2s[i2s_num]->clk_cfg.up_sample_fs = upsample_cfg->fs;
|
|
i2s_ll_tx_set_pdm_fpfs(p_i2s[i2s_num]->hal.dev, upsample_cfg->fp, upsample_cfg->fs);
|
|
i2s_start(i2s_num);
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
return i2s_set_clk(i2s_num, p_i2s[i2s_num]->clk_cfg.sample_rate_hz, p_i2s[i2s_num]->slot_cfg.data_bit_width, p_i2s[i2s_num]->slot_cfg.slot_mode);
|
|
}
|
|
#endif
|
|
|
|
static esp_err_t i2s_dma_object_init(i2s_port_t i2s_num)
|
|
{
|
|
uint32_t buf_size = i2s_get_buf_size(i2s_num);
|
|
p_i2s[i2s_num]->last_buf_size = buf_size;
|
|
/* Create DMA object */
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
ESP_RETURN_ON_ERROR(i2s_create_dma_object(i2s_num, &p_i2s[i2s_num]->tx), TAG, "I2S TX DMA object create failed");
|
|
p_i2s[i2s_num]->tx->buf_size = buf_size;
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
ESP_RETURN_ON_ERROR(i2s_create_dma_object(i2s_num, &p_i2s[i2s_num]->rx), TAG, "I2S RX DMA object create failed");
|
|
p_i2s[i2s_num]->rx->buf_size = buf_size;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void i2s_mode_identify(i2s_port_t i2s_num, const i2s_config_t *i2s_config)
|
|
{
|
|
|
|
p_i2s[i2s_num]->mode = I2S_COMM_MODE_STD;
|
|
|
|
if (i2s_config->mode & I2S_MODE_MASTER) {
|
|
p_i2s[i2s_num]->role = I2S_ROLE_MASTER;
|
|
} else if (i2s_config->mode & I2S_MODE_SLAVE) {
|
|
p_i2s[i2s_num]->role = I2S_ROLE_SLAVE;
|
|
}
|
|
if (i2s_config->mode & I2S_MODE_TX) {
|
|
p_i2s[i2s_num]->dir |= I2S_DIR_TX;
|
|
}
|
|
if (i2s_config->mode & I2S_MODE_RX) {
|
|
p_i2s[i2s_num]->dir |= I2S_DIR_RX;
|
|
}
|
|
#if SOC_I2S_SUPPORTS_PDM
|
|
if (i2s_config->mode & I2S_MODE_PDM) {
|
|
p_i2s[i2s_num]->mode = I2S_COMM_MODE_PDM;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM
|
|
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
if (i2s_config->channel_format == I2S_CHANNEL_FMT_MULTIPLE) {
|
|
p_i2s[i2s_num]->mode = I2S_COMM_MODE_TDM;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_TDM
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
if ((i2s_config->mode & I2S_MODE_DAC_BUILT_IN) ||
|
|
(i2s_config->mode & I2S_MODE_ADC_BUILT_IN)) {
|
|
p_i2s[i2s_num]->mode = (i2s_comm_mode_t)I2S_COMM_MODE_ADC_DAC;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_ADC_DAC
|
|
}
|
|
|
|
static esp_err_t i2s_config_transfer(i2s_port_t i2s_num, const i2s_config_t *i2s_config)
|
|
{
|
|
#define SLOT_CFG(m) p_i2s[i2s_num]->slot_cfg.m
|
|
#define CLK_CFG() p_i2s[i2s_num]->clk_cfg
|
|
/* Convert legacy configuration into general part of slot and clock configuration */
|
|
p_i2s[i2s_num]->slot_cfg.data_bit_width = i2s_config->bits_per_sample;
|
|
p_i2s[i2s_num]->slot_cfg.slot_bit_width = (int)i2s_config->bits_per_chan < (int)i2s_config->bits_per_sample ?
|
|
i2s_config->bits_per_sample : i2s_config->bits_per_chan;
|
|
|
|
p_i2s[i2s_num]->slot_cfg.slot_mode = i2s_config->channel_format < I2S_CHANNEL_FMT_ONLY_RIGHT ?
|
|
I2S_SLOT_MODE_STEREO : I2S_SLOT_MODE_MONO;
|
|
CLK_CFG().sample_rate_hz = i2s_config->sample_rate;
|
|
CLK_CFG().mclk_multiple = i2s_config->mclk_multiple == 0 ? I2S_MCLK_MULTIPLE_256 : i2s_config->mclk_multiple;
|
|
CLK_CFG().clk_src = I2S_CLK_SRC_DEFAULT;
|
|
p_i2s[i2s_num]->fixed_mclk = i2s_config->fixed_mclk;
|
|
p_i2s[i2s_num]->use_apll = false;
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
CLK_CFG().clk_src = i2s_config->use_apll ? I2S_CLK_SRC_APLL : I2S_CLK_SRC_DEFAULT;
|
|
p_i2s[i2s_num]->use_apll = i2s_config->use_apll;
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
|
|
/* Convert legacy configuration into particular part of slot and clock configuration */
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_STD) {
|
|
/* Generate STD slot configuration */
|
|
SLOT_CFG(std).ws_width = i2s_config->bits_per_sample;
|
|
SLOT_CFG(std).ws_pol = false;
|
|
if (i2s_config->channel_format == I2S_CHANNEL_FMT_RIGHT_LEFT) {
|
|
SLOT_CFG(std).slot_mask = I2S_STD_SLOT_BOTH;
|
|
} else if (i2s_config->channel_format == I2S_CHANNEL_FMT_ALL_LEFT ||
|
|
i2s_config->channel_format == I2S_CHANNEL_FMT_ONLY_LEFT) {
|
|
SLOT_CFG(std).slot_mask = I2S_STD_SLOT_LEFT;
|
|
} else {
|
|
SLOT_CFG(std).slot_mask = I2S_STD_SLOT_RIGHT;
|
|
}
|
|
if (i2s_config->communication_format == I2S_COMM_FORMAT_STAND_I2S) {
|
|
SLOT_CFG(std).bit_shift = true;
|
|
}
|
|
if (i2s_config->communication_format & I2S_COMM_FORMAT_STAND_PCM_SHORT) {
|
|
SLOT_CFG(std).bit_shift = true;
|
|
SLOT_CFG(std).ws_width = 1;
|
|
SLOT_CFG(std).ws_pol = true;
|
|
}
|
|
#if SOC_I2S_HW_VERSION_1
|
|
SLOT_CFG(std).msb_right = true;
|
|
#elif SOC_I2S_HW_VERSION_2
|
|
SLOT_CFG(std).left_align = i2s_config->left_align;
|
|
SLOT_CFG(std).big_endian = i2s_config->big_edin;
|
|
SLOT_CFG(std).bit_order_lsb = i2s_config->bit_order_msb; // The old name is incorrect
|
|
#endif // SOC_I2S_HW_VERSION_1
|
|
|
|
p_i2s[i2s_num]->active_slot = (int)p_i2s[i2s_num]->slot_cfg.slot_mode == I2S_SLOT_MODE_MONO ? 1 : 2;
|
|
p_i2s[i2s_num]->total_slot = 2;
|
|
goto finish;
|
|
}
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_PDM) {
|
|
/* Generate PDM TX slot configuration */
|
|
SLOT_CFG(pdm_tx).sd_prescale = 0;
|
|
SLOT_CFG(pdm_tx).sd_scale = I2S_PDM_SIG_SCALING_MUL_1;
|
|
SLOT_CFG(pdm_tx).hp_scale = I2S_PDM_SIG_SCALING_MUL_1;
|
|
SLOT_CFG(pdm_tx).lp_scale = I2S_PDM_SIG_SCALING_MUL_1;
|
|
SLOT_CFG(pdm_tx).sinc_scale = I2S_PDM_SIG_SCALING_MUL_1;
|
|
#if SOC_I2S_HW_VERSION_2
|
|
SLOT_CFG(pdm_tx).line_mode = I2S_PDM_TX_ONE_LINE_CODEC;
|
|
SLOT_CFG(pdm_tx).hp_en = true;
|
|
SLOT_CFG(pdm_tx).hp_cut_off_freq_hz = 49;
|
|
SLOT_CFG(pdm_tx).sd_dither = 0;
|
|
SLOT_CFG(pdm_tx).sd_dither2 = 1;
|
|
#endif // SOC_I2S_HW_VERSION_2
|
|
|
|
/* Generate PDM TX clock configuration */
|
|
CLK_CFG().up_sample_fp = 960;
|
|
CLK_CFG().up_sample_fs = i2s_config->sample_rate / 100;
|
|
p_i2s[i2s_num]->active_slot = (int)p_i2s[i2s_num]->slot_cfg.slot_mode == I2S_SLOT_MODE_MONO ? 1 : 2;
|
|
p_i2s[i2s_num]->total_slot = 2;
|
|
goto finish;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM_TX
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_PDM) {
|
|
/* Generate PDM RX clock configuration */
|
|
CLK_CFG().dn_sample_mode = I2S_PDM_DSR_8S;
|
|
p_i2s[i2s_num]->active_slot = (int)p_i2s[i2s_num]->slot_cfg.slot_mode == I2S_SLOT_MODE_MONO ? 1 : 2;
|
|
p_i2s[i2s_num]->total_slot = 2;
|
|
goto finish;
|
|
}
|
|
#endif // SOC_I2S_SUPPOTYS_PDM_RX
|
|
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_TDM) {
|
|
/* Generate TDM slot configuration */
|
|
SLOT_CFG(tdm).slot_mask = i2s_config->chan_mask >> 16;
|
|
|
|
SLOT_CFG(tdm).ws_width = 0; // I2S_TDM_AUTO_WS_WIDTH
|
|
p_i2s[i2s_num]->slot_cfg.slot_mode = I2S_SLOT_MODE_STEREO;
|
|
SLOT_CFG(tdm).ws_pol = false;
|
|
if (i2s_config->communication_format == I2S_COMM_FORMAT_STAND_I2S) {
|
|
SLOT_CFG(tdm).bit_shift = true;
|
|
} else if (i2s_config->communication_format == I2S_COMM_FORMAT_STAND_PCM_SHORT) {
|
|
SLOT_CFG(tdm).bit_shift = true;
|
|
SLOT_CFG(tdm).ws_width = 1;
|
|
SLOT_CFG(tdm).ws_pol = true;
|
|
} else if (i2s_config->communication_format == I2S_COMM_FORMAT_STAND_PCM_LONG) {
|
|
SLOT_CFG(tdm).bit_shift = true;
|
|
SLOT_CFG(tdm).ws_width = p_i2s[i2s_num]->slot_cfg.slot_bit_width;
|
|
SLOT_CFG(tdm).ws_pol = true;
|
|
}
|
|
SLOT_CFG(tdm).left_align = i2s_config->left_align;
|
|
SLOT_CFG(tdm).big_endian = i2s_config->big_edin;
|
|
SLOT_CFG(tdm).bit_order_lsb = i2s_config->bit_order_msb; // The old name is incorrect
|
|
SLOT_CFG(tdm).skip_mask = i2s_config->skip_msk;
|
|
|
|
/* Generate TDM clock configuration */
|
|
p_i2s[i2s_num]->active_slot = __builtin_popcount(SLOT_CFG(tdm).slot_mask);
|
|
uint32_t mx_slot = 32 - __builtin_clz(SLOT_CFG(tdm).slot_mask);
|
|
mx_slot = mx_slot < 2 ? 2 : mx_slot;
|
|
p_i2s[i2s_num]->total_slot = mx_slot < i2s_config->total_chan ? mx_slot : i2s_config->total_chan;
|
|
goto finish;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_TDM
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
if ((int)p_i2s[i2s_num]->mode == I2S_COMM_MODE_ADC_DAC) {
|
|
p_i2s[i2s_num]->slot_cfg.slot_mode = (p_i2s[i2s_num]->dir & I2S_DIR_TX) ?
|
|
I2S_SLOT_MODE_STEREO : I2S_SLOT_MODE_MONO;
|
|
p_i2s[i2s_num]->active_slot = (p_i2s[i2s_num]->dir & I2S_DIR_TX) ? 2 : 1;
|
|
p_i2s[i2s_num]->total_slot = 2;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_ADC_DAC
|
|
|
|
#undef SLOT_CFG
|
|
#undef CLK_CFG
|
|
|
|
finish:
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_init_legacy(i2s_port_t i2s_num, int intr_alloc_flag)
|
|
{
|
|
/* Create power management lock */
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_type_t pm_lock = ESP_PM_APB_FREQ_MAX;
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (p_i2s[i2s_num]->use_apll) {
|
|
pm_lock = ESP_PM_NO_LIGHT_SLEEP;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
ESP_RETURN_ON_ERROR(esp_pm_lock_create(pm_lock, 0, "i2s_driver", &p_i2s[i2s_num]->pm_lock), TAG, "I2S pm lock error");
|
|
#endif //CONFIG_PM_ENABLE
|
|
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (p_i2s[i2s_num]->use_apll) {
|
|
periph_rtc_apll_acquire();
|
|
}
|
|
#endif
|
|
|
|
/* Enable communicaiton mode */
|
|
if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_STD) {
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_hal_std_enable_tx_channel(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_hal_std_enable_rx_channel(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
}
|
|
#if SOC_I2S_SUPPORTS_PDM
|
|
else if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_PDM) {
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_hal_pdm_enable_tx_channel(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
#endif
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_hal_pdm_enable_rx_channel(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
else if (p_i2s[i2s_num]->mode == I2S_COMM_MODE_TDM) {
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_hal_tdm_enable_tx_channel(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_hal_tdm_enable_rx_channel(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
}
|
|
#endif
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
if ((int)p_i2s[i2s_num]->mode == I2S_COMM_MODE_ADC_DAC) {
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
adc_power_acquire();
|
|
adc_set_i2s_data_source(ADC_I2S_DATA_SRC_ADC);
|
|
i2s_ll_enable_builtin_adc(p_i2s[i2s_num]->hal.dev, true);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_ll_enable_builtin_dac(p_i2s[i2s_num]->hal.dev, true);
|
|
}
|
|
} else {
|
|
adc_set_i2s_data_source(ADC_I2S_DATA_SRC_IO_SIG);
|
|
i2s_ll_enable_builtin_adc(p_i2s[i2s_num]->hal.dev, false);
|
|
i2s_ll_enable_builtin_dac(p_i2s[i2s_num]->hal.dev, false);
|
|
}
|
|
#endif
|
|
|
|
i2s_set_slot_legacy(i2s_num);
|
|
i2s_set_clock_legacy(i2s_num);
|
|
ESP_RETURN_ON_ERROR(i2s_dma_intr_init(i2s_num, intr_alloc_flag), TAG, "I2S interrupt initailze failed");
|
|
ESP_RETURN_ON_ERROR(i2s_dma_object_init(i2s_num), TAG, "I2S dma object create failed");
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
ESP_RETURN_ON_ERROR(i2s_realloc_dma_buffer(i2s_num, p_i2s[i2s_num]->tx), TAG, "Allocate I2S dma tx buffer failed");
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
ESP_RETURN_ON_ERROR(i2s_realloc_dma_buffer(i2s_num, p_i2s[i2s_num]->rx), TAG, "Allocate I2S dma rx buffer failed");
|
|
}
|
|
|
|
/* Initialize I2S DMA object */
|
|
#if SOC_I2S_HW_VERSION_2
|
|
/* Enable tx/rx submodule clock */
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
i2s_ll_tx_enable_clock(p_i2s[i2s_num]->hal.dev);
|
|
}
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
i2s_ll_rx_enable_clock(p_i2s[i2s_num]->hal.dev);
|
|
}
|
|
#endif
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_driver_uninstall(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE(i2s_num < SOC_I2S_NUM, ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_ERR_INVALID_STATE, TAG, "I2S port %d has not installed", i2s_num);
|
|
i2s_obj_t *obj = p_i2s[i2s_num];
|
|
i2s_stop(i2s_num);
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
if ((int)(obj->mode) == I2S_COMM_MODE_ADC_DAC) {
|
|
if (obj->dir & I2S_DIR_TX) {
|
|
// Deinit DAC
|
|
i2s_set_dac_mode(I2S_DAC_CHANNEL_DISABLE);
|
|
}
|
|
if (obj->dir & I2S_DIR_RX) {
|
|
// Deinit ADC
|
|
adc_set_i2s_data_source(ADC_I2S_DATA_SRC_IO_SIG);
|
|
adc_power_release();
|
|
}
|
|
}
|
|
#endif
|
|
#if SOC_GDMA_SUPPORTED
|
|
if (obj->tx_dma_chan) {
|
|
gdma_disconnect(obj->tx_dma_chan);
|
|
gdma_del_channel(obj->tx_dma_chan);
|
|
}
|
|
if (obj->rx_dma_chan) {
|
|
gdma_disconnect(obj->rx_dma_chan);
|
|
gdma_del_channel(obj->rx_dma_chan);
|
|
}
|
|
#else
|
|
if (obj->i2s_isr_handle) {
|
|
esp_intr_free(obj->i2s_isr_handle);
|
|
}
|
|
#endif
|
|
/* Destroy dma object if exist */
|
|
i2s_destroy_dma_object(i2s_num, &obj->tx);
|
|
i2s_destroy_dma_object(i2s_num, &obj->rx);
|
|
|
|
if (obj->i2s_queue) {
|
|
vQueueDelete(obj->i2s_queue);
|
|
obj->i2s_queue = NULL;
|
|
}
|
|
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (obj->use_apll) {
|
|
// switch back to PLL clock source
|
|
if (obj->dir & I2S_DIR_TX) {
|
|
i2s_ll_tx_clk_set_src(obj->hal.dev, I2S_CLK_SRC_DEFAULT);
|
|
}
|
|
if (obj->dir & I2S_DIR_RX) {
|
|
i2s_ll_rx_clk_set_src(obj->hal.dev, I2S_CLK_SRC_DEFAULT);
|
|
}
|
|
periph_rtc_apll_release();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_ENABLE
|
|
if (obj->pm_lock) {
|
|
esp_pm_lock_delete(obj->pm_lock);
|
|
obj->pm_lock = NULL;
|
|
}
|
|
#endif
|
|
#if SOC_I2S_HW_VERSION_2
|
|
if (obj->dir & I2S_DIR_TX) {
|
|
i2s_ll_tx_disable_clock(obj->hal.dev);
|
|
}
|
|
if (obj->dir & I2S_DIR_RX) {
|
|
i2s_ll_rx_disable_clock(obj->hal.dev);
|
|
}
|
|
#endif
|
|
/* Disable module clock */
|
|
i2s_platform_release_occupation(i2s_num);
|
|
free(obj);
|
|
p_i2s[i2s_num] = NULL;
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
esp_err_t i2s_driver_install(i2s_port_t i2s_num, const i2s_config_t *i2s_config, int queue_size, void *i2s_queue)
|
|
{
|
|
#if CONFIG_I2S_ENABLE_DEBUG_LOG
|
|
esp_log_level_set(TAG, ESP_LOG_DEBUG);
|
|
#endif
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
/* Step 1: Check the validity of input parameters */
|
|
ESP_RETURN_ON_ERROR(i2s_check_cfg_validity(i2s_num, i2s_config), TAG, "I2S configuration is invalid");
|
|
|
|
/* Step 2: Allocate driver object and register to platform */
|
|
i2s_obj_t *i2s_obj = calloc(1, sizeof(i2s_obj_t));
|
|
ESP_RETURN_ON_FALSE(i2s_obj, ESP_ERR_NO_MEM, TAG, "no mem for I2S driver");
|
|
if (i2s_platform_acquire_occupation(i2s_num, "i2s_legacy") != ESP_OK) {
|
|
free(i2s_obj);
|
|
ESP_LOGE(TAG, "register I2S object to platform failed");
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
p_i2s[i2s_num] = i2s_obj;
|
|
i2s_hal_init(&i2s_obj->hal, i2s_num);
|
|
|
|
/* Step 3: Store and assign configarations */
|
|
i2s_mode_identify(i2s_num, i2s_config);
|
|
ESP_GOTO_ON_ERROR(i2s_config_transfer(i2s_num, i2s_config), err, TAG, "I2S install failed");
|
|
i2s_obj->dma_desc_num = i2s_config->dma_desc_num;
|
|
i2s_obj->dma_frame_num = i2s_config->dma_frame_num;
|
|
i2s_obj->tx_desc_auto_clear = i2s_config->tx_desc_auto_clear;
|
|
|
|
/* Step 4: Apply configurations and init hardware */
|
|
ESP_GOTO_ON_ERROR(i2s_init_legacy(i2s_num, i2s_config->intr_alloc_flags), err, TAG, "I2S init failed");
|
|
|
|
/* Step 5: Initialise i2s event queue if user needs */
|
|
if (i2s_queue) {
|
|
i2s_obj->i2s_queue = xQueueCreate(queue_size, sizeof(i2s_event_t));
|
|
ESP_GOTO_ON_FALSE(i2s_obj->i2s_queue, ESP_ERR_NO_MEM, err, TAG, "I2S queue create failed");
|
|
*((QueueHandle_t *) i2s_queue) = i2s_obj->i2s_queue;
|
|
ESP_LOGD(TAG, "queue free spaces: %d", uxQueueSpacesAvailable(i2s_obj->i2s_queue));
|
|
} else {
|
|
i2s_obj->i2s_queue = NULL;
|
|
}
|
|
|
|
/* Step 6: Start I2S for backward compatibility */
|
|
ESP_GOTO_ON_ERROR(i2s_start(i2s_num), err, TAG, "I2S start failed");
|
|
|
|
return ESP_OK;
|
|
|
|
err:
|
|
/* I2S install failed, prepare to uninstall */
|
|
i2s_driver_uninstall(i2s_num);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_write(i2s_port_t i2s_num, const void *src, size_t size, size_t *bytes_written, TickType_t ticks_to_wait)
|
|
{
|
|
char *data_ptr;
|
|
char *src_byte;
|
|
size_t bytes_can_write;
|
|
*bytes_written = 0;
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->tx), ESP_ERR_INVALID_ARG, TAG, "TX mode is not enabled");
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, portMAX_DELAY);
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_acquire(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
src_byte = (char *)src;
|
|
while (size > 0) {
|
|
if (p_i2s[i2s_num]->tx->rw_pos == p_i2s[i2s_num]->tx->buf_size || p_i2s[i2s_num]->tx->curr_ptr == NULL) {
|
|
if (xQueueReceive(p_i2s[i2s_num]->tx->queue, &p_i2s[i2s_num]->tx->curr_ptr, ticks_to_wait) == pdFALSE) {
|
|
break;
|
|
}
|
|
p_i2s[i2s_num]->tx->rw_pos = 0;
|
|
}
|
|
ESP_LOGD(TAG, "size: %d, rw_pos: %d, buf_size: %d, curr_ptr: %d", size, p_i2s[i2s_num]->tx->rw_pos, p_i2s[i2s_num]->tx->buf_size, (int)p_i2s[i2s_num]->tx->curr_ptr);
|
|
data_ptr = (char *)p_i2s[i2s_num]->tx->curr_ptr;
|
|
data_ptr += p_i2s[i2s_num]->tx->rw_pos;
|
|
bytes_can_write = p_i2s[i2s_num]->tx->buf_size - p_i2s[i2s_num]->tx->rw_pos;
|
|
if (bytes_can_write > size) {
|
|
bytes_can_write = size;
|
|
}
|
|
memcpy(data_ptr, src_byte, bytes_can_write);
|
|
size -= bytes_can_write;
|
|
src_byte += bytes_can_write;
|
|
p_i2s[i2s_num]->tx->rw_pos += bytes_can_write;
|
|
(*bytes_written) += bytes_can_write;
|
|
}
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_release(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_write_expand(i2s_port_t i2s_num, const void *src, size_t size, size_t src_bits, size_t aim_bits, size_t *bytes_written, TickType_t ticks_to_wait)
|
|
{
|
|
char *data_ptr;
|
|
int bytes_can_write;
|
|
int tail;
|
|
int src_bytes;
|
|
int aim_bytes;
|
|
int zero_bytes;
|
|
*bytes_written = 0;
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((size > 0), ESP_ERR_INVALID_ARG, TAG, "size must greater than zero");
|
|
ESP_RETURN_ON_FALSE((aim_bits >= src_bits), ESP_ERR_INVALID_ARG, TAG, "aim_bits mustn't be less than src_bits");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->tx), ESP_ERR_INVALID_ARG, TAG, "TX mode is not enabled");
|
|
if (src_bits < I2S_BITS_PER_SAMPLE_8BIT || aim_bits < I2S_BITS_PER_SAMPLE_8BIT) {
|
|
ESP_LOGE(TAG, "bits mustn't be less than 8, src_bits %d aim_bits %d", src_bits, aim_bits);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if (src_bits > I2S_BITS_PER_SAMPLE_32BIT || aim_bits > I2S_BITS_PER_SAMPLE_32BIT) {
|
|
ESP_LOGE(TAG, "bits mustn't be greater than 32, src_bits %d aim_bits %d", src_bits, aim_bits);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if ((src_bits == I2S_BITS_PER_SAMPLE_16BIT || src_bits == I2S_BITS_PER_SAMPLE_32BIT) && (size % 2 != 0)) {
|
|
ESP_LOGE(TAG, "size must be a even number while src_bits is even, src_bits %d size %d", src_bits, size);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if (src_bits == I2S_BITS_PER_SAMPLE_24BIT && (size % 3 != 0)) {
|
|
ESP_LOGE(TAG, "size must be a multiple of 3 while src_bits is 24, size %d", size);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
src_bytes = src_bits / 8;
|
|
aim_bytes = aim_bits / 8;
|
|
zero_bytes = aim_bytes - src_bytes;
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, portMAX_DELAY);
|
|
size = size * aim_bytes / src_bytes;
|
|
ESP_LOGD(TAG, "aim_bytes %d src_bytes %d size %d", aim_bytes, src_bytes, size);
|
|
while (size > 0) {
|
|
if (p_i2s[i2s_num]->tx->rw_pos == p_i2s[i2s_num]->tx->buf_size || p_i2s[i2s_num]->tx->curr_ptr == NULL) {
|
|
if (xQueueReceive(p_i2s[i2s_num]->tx->queue, &p_i2s[i2s_num]->tx->curr_ptr, ticks_to_wait) == pdFALSE) {
|
|
break;
|
|
}
|
|
p_i2s[i2s_num]->tx->rw_pos = 0;
|
|
}
|
|
data_ptr = (char *)p_i2s[i2s_num]->tx->curr_ptr;
|
|
data_ptr += p_i2s[i2s_num]->tx->rw_pos;
|
|
bytes_can_write = p_i2s[i2s_num]->tx->buf_size - p_i2s[i2s_num]->tx->rw_pos;
|
|
if (bytes_can_write > (int)size) {
|
|
bytes_can_write = size;
|
|
}
|
|
tail = bytes_can_write % aim_bytes;
|
|
bytes_can_write = bytes_can_write - tail;
|
|
|
|
memset(data_ptr, 0, bytes_can_write);
|
|
for (int j = 0; j < bytes_can_write; j += (aim_bytes - zero_bytes)) {
|
|
j += zero_bytes;
|
|
memcpy(&data_ptr[j], (const char *)(src + *bytes_written), aim_bytes - zero_bytes);
|
|
(*bytes_written) += (aim_bytes - zero_bytes);
|
|
}
|
|
size -= bytes_can_write;
|
|
p_i2s[i2s_num]->tx->rw_pos += bytes_can_write;
|
|
}
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_read(i2s_port_t i2s_num, void *dest, size_t size, size_t *bytes_read, TickType_t ticks_to_wait)
|
|
{
|
|
char *data_ptr;;
|
|
char *dest_byte;
|
|
int bytes_can_read;
|
|
*bytes_read = 0;
|
|
dest_byte = (char *)dest;
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->rx), ESP_ERR_INVALID_ARG, TAG, "RX mode is not enabled");
|
|
xSemaphoreTake(p_i2s[i2s_num]->rx->mux, portMAX_DELAY);
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_acquire(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
while (size > 0) {
|
|
if (p_i2s[i2s_num]->rx->rw_pos == p_i2s[i2s_num]->rx->buf_size || p_i2s[i2s_num]->rx->curr_ptr == NULL) {
|
|
if (xQueueReceive(p_i2s[i2s_num]->rx->queue, &p_i2s[i2s_num]->rx->curr_ptr, ticks_to_wait) == pdFALSE) {
|
|
break;
|
|
}
|
|
p_i2s[i2s_num]->rx->rw_pos = 0;
|
|
}
|
|
data_ptr = (char *)p_i2s[i2s_num]->rx->curr_ptr;
|
|
data_ptr += p_i2s[i2s_num]->rx->rw_pos;
|
|
bytes_can_read = p_i2s[i2s_num]->rx->buf_size - p_i2s[i2s_num]->rx->rw_pos;
|
|
if (bytes_can_read > (int)size) {
|
|
bytes_can_read = size;
|
|
}
|
|
memcpy(dest_byte, data_ptr, bytes_can_read);
|
|
size -= bytes_can_read;
|
|
dest_byte += bytes_can_read;
|
|
p_i2s[i2s_num]->rx->rw_pos += bytes_can_read;
|
|
(*bytes_read) += bytes_can_read;
|
|
}
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_release(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
xSemaphoreGive(p_i2s[i2s_num]->rx->mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*-------------------------------------------------------------
|
|
I2S GPIO operation
|
|
-------------------------------------------------------------*/
|
|
static void gpio_matrix_out_check_and_set(gpio_num_t gpio, uint32_t signal_idx, bool out_inv, bool oen_inv)
|
|
{
|
|
//if pin = -1, do not need to configure
|
|
if (gpio != -1) {
|
|
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
|
|
gpio_set_direction(gpio, GPIO_MODE_OUTPUT);
|
|
esp_rom_gpio_connect_out_signal(gpio, signal_idx, out_inv, oen_inv);
|
|
}
|
|
}
|
|
|
|
static void gpio_matrix_in_check_and_set(gpio_num_t gpio, uint32_t signal_idx, bool inv)
|
|
{
|
|
if (gpio != -1) {
|
|
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
|
|
/* Set direction, for some GPIOs, the input function are not enabled as default */
|
|
gpio_set_direction(gpio, GPIO_MODE_INPUT);
|
|
esp_rom_gpio_connect_in_signal(gpio, signal_idx, inv);
|
|
}
|
|
}
|
|
|
|
static esp_err_t i2s_check_set_mclk(i2s_port_t i2s_num, gpio_num_t gpio_num)
|
|
{
|
|
if (gpio_num == -1) {
|
|
return ESP_OK;
|
|
}
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
ESP_RETURN_ON_FALSE((gpio_num == GPIO_NUM_0 || gpio_num == GPIO_NUM_1 || gpio_num == GPIO_NUM_3),
|
|
ESP_ERR_INVALID_ARG, TAG,
|
|
"ESP32 only support to set GPIO0/GPIO1/GPIO3 as mclk signal, error GPIO number:%d", gpio_num);
|
|
bool is_i2s0 = i2s_num == I2S_NUM_0;
|
|
if (gpio_num == GPIO_NUM_0) {
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO0_U, FUNC_GPIO0_CLK_OUT1);
|
|
WRITE_PERI_REG(PIN_CTRL, is_i2s0 ? 0xFFF0 : 0xFFFF);
|
|
} else if (gpio_num == GPIO_NUM_1) {
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD_CLK_OUT3);
|
|
WRITE_PERI_REG(PIN_CTRL, is_i2s0 ? 0xF0F0 : 0xF0FF);
|
|
} else {
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD_CLK_OUT2);
|
|
WRITE_PERI_REG(PIN_CTRL, is_i2s0 ? 0xFF00 : 0xFF0F);
|
|
}
|
|
#else
|
|
ESP_RETURN_ON_FALSE(GPIO_IS_VALID_GPIO(gpio_num), ESP_ERR_INVALID_ARG, TAG, "mck_io_num invalid");
|
|
gpio_matrix_out_check_and_set(gpio_num, i2s_periph_signal[i2s_num].mck_out_sig, 0, 0);
|
|
#endif
|
|
ESP_LOGD(TAG, "I2S%d, MCLK output by GPIO%d", i2s_num, gpio_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_zero_dma_buffer(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
uint32_t buf_cnt = p_i2s[i2s_num]->dma_desc_num;
|
|
|
|
/* Clear I2S RX DMA buffer */
|
|
if (p_i2s[i2s_num]->rx && p_i2s[i2s_num]->rx->buf != NULL && p_i2s[i2s_num]->rx->buf_size != 0) {
|
|
for (int i = 0; i < buf_cnt; i++) {
|
|
memset(p_i2s[i2s_num]->rx->buf[i], 0, p_i2s[i2s_num]->rx->buf_size);
|
|
}
|
|
}
|
|
|
|
/* Clear I2S TX DMA buffer */
|
|
if (p_i2s[i2s_num]->tx && p_i2s[i2s_num]->tx->buf != NULL && p_i2s[i2s_num]->tx->buf_size != 0) {
|
|
/* Finish to write all tx data */
|
|
int bytes_left = (p_i2s[i2s_num]->tx->buf_size - p_i2s[i2s_num]->tx->rw_pos) % 4;
|
|
if (bytes_left) {
|
|
size_t zero_bytes = 0;
|
|
size_t bytes_written;
|
|
i2s_write(i2s_num, (void *)&zero_bytes, bytes_left, &bytes_written, portMAX_DELAY);
|
|
}
|
|
for (int i = 0; i < buf_cnt; i++) {
|
|
memset(p_i2s[i2s_num]->tx->buf[i], 0, p_i2s[i2s_num]->tx->buf_size);
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_set_pin(i2s_port_t i2s_num, const i2s_pin_config_t *pin)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
if (pin == NULL) {
|
|
#if SOC_I2S_SUPPORTS_DAC
|
|
return i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
|
|
#else
|
|
return ESP_ERR_INVALID_ARG;
|
|
#endif
|
|
}
|
|
/* Check validity of selected pins */
|
|
ESP_RETURN_ON_FALSE((pin->bck_io_num == -1 || GPIO_IS_VALID_GPIO(pin->bck_io_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "bck_io_num invalid");
|
|
ESP_RETURN_ON_FALSE((pin->ws_io_num == -1 || GPIO_IS_VALID_GPIO(pin->ws_io_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "ws_io_num invalid");
|
|
ESP_RETURN_ON_FALSE((pin->data_out_num == -1 || GPIO_IS_VALID_GPIO(pin->data_out_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "data_out_num invalid");
|
|
ESP_RETURN_ON_FALSE((pin->data_in_num == -1 || GPIO_IS_VALID_GPIO(pin->data_in_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "data_in_num invalid");
|
|
|
|
if (p_i2s[i2s_num]->role == I2S_ROLE_SLAVE) {
|
|
/* For "tx + rx + slave" or "rx + slave" mode, we should select RX signal index for ws and bck */
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_RX) {
|
|
gpio_matrix_in_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].s_rx_ws_sig, 0);
|
|
gpio_matrix_in_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].s_rx_bck_sig, 0);
|
|
/* For "tx + slave" mode, we should select TX signal index for ws and bck */
|
|
} else {
|
|
gpio_matrix_in_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].s_tx_ws_sig, 0);
|
|
gpio_matrix_in_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].s_tx_bck_sig, 0);
|
|
}
|
|
} else {
|
|
/* mclk only available in master mode */
|
|
ESP_RETURN_ON_ERROR(i2s_check_set_mclk(i2s_num, pin->mck_io_num), TAG, "mclk config failed");
|
|
/* For "tx + rx + master" or "tx + master" mode, we should select TX signal index for ws and bck */
|
|
if (p_i2s[i2s_num]->dir & I2S_DIR_TX) {
|
|
gpio_matrix_out_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].m_tx_ws_sig, 0, 0);
|
|
gpio_matrix_out_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].m_tx_bck_sig, 0, 0);
|
|
/* For "rx + master" mode, we should select RX signal index for ws and bck */
|
|
} else {
|
|
gpio_matrix_out_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].m_rx_ws_sig, 0, 0);
|
|
gpio_matrix_out_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].m_rx_bck_sig, 0, 0);
|
|
}
|
|
}
|
|
|
|
/* Set data input/ouput GPIO */
|
|
gpio_matrix_out_check_and_set(pin->data_out_num, i2s_periph_signal[i2s_num].data_out_sig, 0, 0);
|
|
gpio_matrix_in_check_and_set(pin->data_in_num, i2s_periph_signal[i2s_num].data_in_sig, 0);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_platform_acquire_occupation(int id, const char *comp_name)
|
|
{
|
|
esp_err_t ret = ESP_ERR_NOT_FOUND;
|
|
ESP_RETURN_ON_FALSE(id < SOC_I2S_NUM, ESP_ERR_INVALID_ARG, TAG, "invalid i2s port id");
|
|
portENTER_CRITICAL(&i2s_spinlock[id]);
|
|
if (!comp_using_i2s[id]) {
|
|
ret = ESP_OK;
|
|
comp_using_i2s[id] = comp_name;
|
|
periph_module_enable(i2s_periph_signal[id].module);
|
|
i2s_ll_enable_clock(I2S_LL_GET_HW(id));
|
|
}
|
|
portEXIT_CRITICAL(&i2s_spinlock[id]);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_platform_release_occupation(int id)
|
|
{
|
|
esp_err_t ret = ESP_ERR_INVALID_STATE;
|
|
ESP_RETURN_ON_FALSE(id < SOC_I2S_NUM, ESP_ERR_INVALID_ARG, TAG, "invalid i2s port id");
|
|
portENTER_CRITICAL(&i2s_spinlock[id]);
|
|
if (comp_using_i2s[id]) {
|
|
ret = ESP_OK;
|
|
comp_using_i2s[id] = NULL;
|
|
/* Disable module clock */
|
|
periph_module_disable(i2s_periph_signal[id].module);
|
|
i2s_ll_disable_clock(I2S_LL_GET_HW(id));
|
|
}
|
|
portEXIT_CRITICAL(&i2s_spinlock[id]);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function will be called during start up, to check that pulse_cnt driver is not running along with the legacy i2s driver
|
|
*/
|
|
static __attribute__((constructor)) void check_i2s_driver_conflict(void)
|
|
{
|
|
extern __attribute__((weak)) esp_err_t i2s_del_channel(void *handle);
|
|
/* If the new I2S driver is linked, the weak function will point to the actual function in the new driver, otherwise it is NULL*/
|
|
if ((void *)i2s_del_channel != NULL) {
|
|
ESP_EARLY_LOGE(TAG, "CONFLICT! The new i2s driver can't work along with the legacy i2s driver");
|
|
abort();
|
|
}
|
|
ESP_EARLY_LOGW(TAG, "legacy i2s driver is deprecated, please migrate to use driver/i2s_std.h, driver/i2s_pdm.h or driver/i2s_tdm.h");
|
|
}
|