esp-idf/examples/peripherals/.build-test-rules.yml

492 lines
12 KiB
YAML

# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
.adc_dependencies: &adc_dependencies
depends_components:
- esp_adc
- efuse
- esp_driver_i2s
- esp_driver_spi
.i2c_dependencies: &i2c_dependencies
depends_filepatterns:
# components
- examples/system/console/advanced/components/**/*
- components/driver/i2c/**/*
- components/driver/Kconfig
examples/peripherals/adc/continuous_read:
disable:
- if: SOC_ADC_DMA_SUPPORTED != 1
<<: *adc_dependencies
examples/peripherals/adc/oneshot_read:
disable:
- if: SOC_ADC_SUPPORTED != 1
<<: *adc_dependencies
examples/peripherals/analog_comparator:
disable:
- if: SOC_ANA_CMPR_SUPPORTED != 1
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: not supported yet
depends_components:
- esp_driver_gpio
- esp_driver_ana_cmpr
examples/peripherals/dac:
disable:
- if: SOC_DAC_SUPPORTED != 1
examples/peripherals/dac/dac_cosine_wave:
disable:
- if: SOC_DAC_SUPPORTED != 1
depends_components:
- esp_adc
- efuse
- esp_driver_i2s
- esp_driver_spi
- esp_driver_dac
examples/peripherals/gpio:
depends_components:
- esp_driver_gpio
examples/peripherals/gpio/matrix_keyboard:
enable:
- if: IDF_TARGET == "esp32s2"
examples/peripherals/i2c/i2c_eeprom:
disable:
- if: SOC_I2C_SUPPORTED != 1
depends_components:
- esp_driver_i2c
examples/peripherals/i2c/i2c_self_test:
disable:
- if: SOC_I2C_SUPPORT_SLAVE != 1
reason: the test requires both master and slave
<<: *i2c_dependencies
examples/peripherals/i2c/i2c_simple:
disable:
- if: SOC_I2C_SUPPORT_SLAVE != 1
reason: the test requires both master and slave
<<: *i2c_dependencies
examples/peripherals/i2c/i2c_tools:
disable:
- if: SOC_I2C_SUPPORTED != 1
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: lack of runners
<<: *i2c_dependencies
examples/peripherals/i2s/i2s_basic/i2s_pdm:
disable:
- if: SOC_I2S_SUPPORTS_PDM != 1 or IDF_TARGET == "esp32p4"
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_i2s
examples/peripherals/i2s/i2s_basic/i2s_std:
disable:
- if: SOC_I2S_SUPPORTED != 1 or IDF_TARGET == "esp32p4"
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_i2s
examples/peripherals/i2s/i2s_basic/i2s_tdm:
disable:
- if: SOC_I2S_SUPPORTS_TDM != 1 or IDF_TARGET == "esp32p4"
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_i2s
examples/peripherals/i2s/i2s_codec/i2s_es7210_tdm:
disable:
- if: SOC_I2S_SUPPORTS_TDM != 1 or (SOC_I2C_SUPPORTED != 1 or SOC_GPSPI_SUPPORTED != 1)
reason: rely on I2S TDM mode to receive audio, I2C to config es7210 and SPI to save audio to SD card
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_i2s
- esp_driver_spi
depends_filepatterns:
- components/driver/i2c/**/*
examples/peripherals/i2s/i2s_codec/i2s_es8311:
disable:
- if: (SOC_I2S_SUPPORTED != 1 or SOC_I2C_SUPPORTED != 1)
reason: rely on I2S STD mode and I2C to config es7210
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_i2s
depends_filepatterns:
- components/driver/i2c/**/*
examples/peripherals/i2s/i2s_recorder:
disable:
- if: SOC_SDMMC_HOST_SUPPORTED != 1 or IDF_TARGET == "esp32p4"
enable:
- if: SOC_I2S_SUPPORTS_PDM_RX > 0
depends_components:
- esp_driver_spi
- esp_driver_i2s
examples/peripherals/lcd/i2c_oled:
disable:
- if: SOC_I2C_SUPPORTED != 1
depends_components:
- esp_lcd
depends_filepatterns:
- components/driver/i2c/**/*
examples/peripherals/lcd/i80_controller:
disable:
- if: SOC_LCD_I80_SUPPORTED != 1
depends_components:
- esp_lcd
- esp_driver_i2s
examples/peripherals/lcd/rgb_panel:
disable:
- if: SOC_LCD_RGB_SUPPORTED != 1
depends_components:
- esp_lcd
examples/peripherals/lcd/spi_lcd_touch:
disable:
- if: SOC_GPSPI_SUPPORTED != 1
depends_components:
- esp_lcd
- esp_driver_spi
examples/peripherals/lcd/tjpgd:
disable:
- if: SOC_GPSPI_SUPPORTED != 1
depends_components:
- esp_lcd
- esp_driver_spi
examples/peripherals/ledc:
disable:
- if: SOC_LEDC_SUPPORTED != 1
depends_components:
- esp_driver_ledc
examples/peripherals/ledc/ledc_gamma_curve_fade:
disable:
- if: SOC_LEDC_SUPPORTED != 1 or SOC_LEDC_GAMMA_CURVE_FADE_SUPPORTED != 1
depends_components:
- esp_driver_ledc
examples/peripherals/mcpwm:
disable:
- if: SOC_MCPWM_SUPPORTED != 1
depends_components:
- esp_driver_mcpwm
examples/peripherals/mcpwm/mcpwm_bdc_speed_control:
disable:
- if: SOC_MCPWM_SUPPORTED != 1
depends_components:
- esp_driver_mcpwm
disable_test:
- if: IDF_TARGET != "esp32s3"
temporary: true
reason: lack of runners
examples/peripherals/mcpwm/mcpwm_bldc_hall_control:
disable:
- if: SOC_MCPWM_SUPPORTED != 1
depends_components:
- esp_driver_mcpwm
disable_test:
- if: IDF_TARGET != "esp32s3"
temporary: true
reason: lack of runners
examples/peripherals/mcpwm/mcpwm_capture_hc_sr04:
disable:
- if: SOC_MCPWM_SUPPORTED != 1
depends_components:
- esp_driver_mcpwm
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: test not pass, should be re-enable # TODO: IDF-8963
examples/peripherals/mcpwm/mcpwm_foc_svpwm_open_loop:
disable:
- if: SOC_MCPWM_SUPPORTED != 1
depends_components:
- esp_driver_mcpwm
disable_test:
- if: IDF_TARGET != "esp32s3"
temporary: true
reason: lack of runners
examples/peripherals/mcpwm/mcpwm_servo_control:
disable:
- if: SOC_MCPWM_SUPPORTED != 1
depends_components:
- esp_driver_mcpwm
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: test not pass, should be re-enable # TODO: IDF-8963
examples/peripherals/mcpwm/mcpwm_sync:
disable:
- if: SOC_MCPWM_SUPPORTED != 1
depends_components:
- esp_driver_mcpwm
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: test not pass, should be re-enable # TODO: IDF-8963
examples/peripherals/parlio:
disable:
- if: SOC_PARLIO_SUPPORTED != 1
disable_test:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: lack of runner
depends_components:
- esp_driver_parlio
examples/peripherals/parlio/parlio_rx:
disable:
- if: SOC_PARLIO_SUPPORTED != 1 or IDF_TARGET == "esp32p4"
temporary: true
reason: not support esp32p4 yet (IDF-7471)
depends_components:
- esp_driver_parlio
examples/peripherals/parlio/parlio_tx/simple_rgb_led_matrix:
disable:
- if: SOC_PARLIO_SUPPORTED != 1 or SOC_DEDICATED_GPIO_SUPPORTED != 1
disable_test:
- if: IDF_TARGET != "esp32c6"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_parlio
examples/peripherals/pcnt:
disable:
- if: SOC_PCNT_SUPPORTED != 1
depends_components:
- esp_driver_pcnt
examples/peripherals/rmt:
disable:
- if: SOC_RMT_SUPPORTED != 1
depends_components:
- esp_driver_rmt
examples/peripherals/rmt/ir_nec_transceiver:
disable:
- if: SOC_RMT_SUPPORTED != 1
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_rmt
examples/peripherals/rmt/musical_buzzer:
disable:
- if: SOC_RMT_SUPPORT_TX_LOOP_COUNT != 1
depends_components:
- esp_driver_rmt
examples/peripherals/rmt/stepper_motor:
disable:
- if: SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP != 1
depends_components:
- esp_driver_rmt
examples/peripherals/sdio/host:
disable:
- if: IDF_TARGET == "esp32p4"
temporary: true
reason: request p4 essl spi to be ready for build, TODO IDF-8357
enable:
- if: SOC_SDMMC_HOST_SUPPORTED == 1
- if: IDF_TARGET == "esp32"
temporary: true
reason: Only the SDSPI of ESP32 supports ESP SDIO slave for now
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_sdio
examples/peripherals/sdio/slave:
disable:
- if: SOC_SDIO_SLAVE_SUPPORTED != 1
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: lack of runners
depends_components:
- esp_driver_sdio
examples/peripherals/sigma_delta:
disable:
- if: SOC_SDM_SUPPORTED != 1
depends_components:
- esp_driver_sdm
examples/peripherals/spi_master/hd_eeprom:
disable:
- if: SOC_GPSPI_SUPPORTED != 1
examples/peripherals/spi_master/lcd:
disable:
- if: SOC_GPSPI_SUPPORTED != 1
examples/peripherals/spi_slave:
disable:
- if: SOC_GPSPI_SUPPORTED != 1
examples/peripherals/spi_slave_hd/append_mode/master:
disable:
- if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1
examples/peripherals/spi_slave_hd/append_mode/slave:
disable:
- if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1
examples/peripherals/spi_slave_hd/segment_mode/seg_master:
disable:
- if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1
examples/peripherals/spi_slave_hd/segment_mode/seg_slave:
disable:
- if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1
examples/peripherals/temperature_sensor/temp_sensor:
disable:
- if: SOC_TEMP_SENSOR_SUPPORTED != 1
depends_components:
- esp_driver_tsens
examples/peripherals/temperature_sensor/temp_sensor_monitor:
disable:
- if: SOC_TEMPERATURE_SENSOR_INTR_SUPPORT != 1
depends_components:
- esp_driver_tsens
examples/peripherals/timer_group/gptimer:
disable:
- if: SOC_GPTIMER_SUPPORTED != 1
depends_components:
- esp_driver_gptimer
examples/peripherals/timer_group/gptimer_capture_hc_sr04:
disable:
- if: SOC_TIMER_SUPPORT_ETM != 1
depends_components:
- esp_driver_gptimer
examples/peripherals/timer_group/legacy_driver:
disable:
- if: SOC_GPTIMER_SUPPORTED != 1
depends_components:
- driver # legacy driver is still located in the "driver" component
examples/peripherals/touch_sensor:
disable:
- if: SOC_TOUCH_SENSOR_SUPPORTED != 1
examples/peripherals/touch_sensor/touch_element:
enable:
- if: IDF_TARGET in ["esp32s2", "esp32s3"]
reason: only supports esp32s2 and esp32s3
examples/peripherals/touch_sensor/touch_sensor_v1:
disable:
- if: SOC_TOUCH_SENSOR_VERSION != 1
examples/peripherals/touch_sensor/touch_sensor_v2:
disable:
- if: SOC_TOUCH_SENSOR_VERSION != 2
examples/peripherals/twai/twai_alert_and_recovery:
disable:
- if: SOC_TWAI_SUPPORTED != 1
disable_test:
- if: IDF_TARGET not in ["esp32"]
temporary: true
reason: lack of runners
examples/peripherals/twai/twai_network:
disable:
- if: SOC_TWAI_SUPPORTED != 1
disable_test:
- if: IDF_TARGET not in ["esp32"]
temporary: true
reason: lack of runners
examples/peripherals/twai/twai_self_test:
disable:
- if: SOC_TWAI_SUPPORTED != 1
disable_test:
- if: IDF_TARGET not in ["esp32"]
temporary: true
reason: lack of runners
examples/peripherals/uart/uart_echo_rs485:
enable:
- if: INCLUDE_DEFAULT == 1
examples/peripherals/usb:
disable:
- if: SOC_USB_OTG_SUPPORTED != 1
examples/peripherals/usb/device:
enable:
- if: SOC_USB_OTG_SUPPORTED == 1
disable_test:
- if: IDF_TARGET == "esp32s3"
temporary: true
reason: lack of runners
depends_components:
- usb
depends_filepatterns:
- components/hal/usb*.c
- components/hal/esp32*/include/hal/usb*.h
- examples/peripherals/usb/host/**/*
- examples/peripherals/usb/device/**/*
examples/peripherals/usb_serial_jtag/usb_serial_jtag_echo:
disable:
- if: SOC_USB_SERIAL_JTAG_SUPPORTED != 1
disable_test:
- if: IDF_TARGET not in ["esp32c6"]
temporary: true
reason: lack of runners. Hardware is similar, test on one target is enough currently.
depends_components:
- esp_driver_usb_serial_jtag