esp-idf/examples/wifi
Nachiket Kukade fb64c24785 fix(esp_wifi): Update FTM calibration and fix other FTM issues
Update wifi libs with below fixes -

1. Bugfixes in Initiator and Responder mode
2. Fix wrong RTT value in first FTM procedure without connection
3. Update FTM calibration values for ESP32S2, S3 and C3
4. Update distance estimation logic
5. Add some useful command parameters in FTM example
6. Fix bug when number of FTM measurement frames received is more
   than (number_of_brusts * FTMs per brust).

Co-authored-by: Sarvesh Bodakhe <sarvesh.bodakhe@espressif.com>
2023-07-21 10:08:18 +05:30
..
espnow esp_wifi: fix espnow example add peer fail when config channel 2023-04-13 10:53:31 +08:00
fast_scan Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
ftm fix(esp_wifi): Update FTM calibration and fix other FTM issues 2023-07-21 10:08:18 +05:30
getting_started esp_wifi: WPA3 SAE H2E support for station 2022-08-18 02:55:51 +05:30
iperf Added bandwidth limitaion option to iperf test scripts 2022-04-06 10:44:31 +00:00
power_save light sleep: add wifi power save example for esp32s3 2021-08-04 21:31:45 +08:00
roaming esp_wifi: Add APIs to check BTM and RRM support of connected AP 2022-06-14 14:49:51 +05:30
scan wpa_supplicant : Fix scan results for GCMP and GCMP-256 cipher. 2023-06-07 10:22:03 +05:30
smart_config esp_wifi: Modify ESP_IF_WIFI_STA to WIFI_IF_STA 2021-01-19 11:55:44 +08:00
wifi_eap_fast esp_wifi: Add an example for EAP-FAST. 2022-02-10 15:55:21 +05:30
wifi_easy_connect/dpp-enrollee esp_example: Enable MbedTLS for DPP enrollee by default 2022-04-20 10:08:45 +00:00
wifi_enterprise esp_wifi: fix typo in wifi_enterprise example README 2023-03-08 13:23:54 +05:30
wps Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
README.md examples: create a new folder structure for generic network examples 2021-07-26 12:25:19 +02:00

Wi-Fi Examples

This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:

  • espnow is the connectionless Wi-Fi communication protocol.
  • fast_scan shows how to use fast scan while connecting to an AP..
  • ftm is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
  • getting_started contains the basic examples for using Wi-Fi in STA and AP mode.
  • iperf shows the common performance measurements for two ESP running this example.
  • power_save contains a how to use power save mode of Wi-Fi.
  • roaming contains a example using 802.11k and 802.11v APIs.
  • scan shows how to scan for all the available APs.
  • smart_config shows how ESP connects to a target AP with ESPTOUCH.
  • wifi_easy_connect shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
  • wpa2_enterprise connects to AP with WPA2 enterprise encryption.
  • wps contains a how to use the Wi-Fi Protected Setup protocol.

More

See the README.md file in the upper level examples directory for more information about examples.