esp-idf/examples/bluetooth/a2dp_sink
2018-03-05 19:22:21 +08:00
..
main component/bt: remove some error logs which are not error 2018-03-05 19:22:21 +08:00
Makefile component/bt: implement classic Bluetooth profiles A2DP(sink) and AVRCP(controller) 2017-04-12 16:42:14 +08:00
README.md component/bt: fix README.md format and loggings for A2DP sink example 2018-01-22 10:24:22 +08:00
sdkconfig.defaults component/bt: implement A2DP source 2018-01-09 20:20:52 +08:00

ESP-IDF A2DP-SINK demo

Demo of A2DP audio sink role

This is the demo of API implementing Advanced Audio Distribution Profile to receive an audio stream.

For the I2S codec, pick whatever chip or board works for you; this code was written using a PCM5102 chip, but other I2S boards and chips will probably work as well. The default I2S connections are shown below, but these can be changed in menuconfig:

ESP pin I2S signal
GPIO22 LRCK
GPIO25 DATA
GPIO26 BCK

If the internal DAC is selected, analog audio will be available on GPIO25 and GPIO26. The output resolution on these pins will always be limited to 8 bit because of the internal structure of the DACs.

After the program is started, other bluetooth devices such as smart phones can discover a device named "ESP_SPEAKER". Once a connection is established, audio data can be transmitted. This will be visible in the application log including a count of audio data packets.