esp-idf/components/esp_system/port/soc/esp32s3/usb_console.c
Sudeep Mohanty a9fda54d39 esp_hw_support/esp_system: Re-evaluate header inclusions and include directories
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
2022-03-07 11:18:08 +05:30

419 lines
12 KiB
C

/*
* SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdio.h>
#include <string.h>
#include <assert.h>
#include <sys/param.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "esp_system.h"
#include "esp_intr_alloc.h"
#include "esp_private/usb_console.h"
#include "soc/periph_defs.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/usb_struct.h"
#include "soc/usb_reg.h"
#include "spinlock.h"
#include "hal/soc_hal.h"
#include "esp_rom_uart.h"
#include "esp_rom_sys.h"
#include "esp32s3/rom/usb/usb_dc.h"
#include "esp32s3/rom/usb/cdc_acm.h"
#include "esp32s3/rom/usb/usb_dfu.h"
#include "esp32s3/rom/usb/usb_device.h"
#include "esp32s3/rom/usb/usb_os_glue.h"
#include "esp32s3/rom/usb/usb_persist.h"
#include "esp32s3/rom/usb/chip_usb_dw_wrapper.h"
#define CDC_WORK_BUF_SIZE (ESP_ROM_CDC_ACM_WORK_BUF_MIN + CONFIG_ESP_CONSOLE_USB_CDC_RX_BUF_SIZE)
typedef enum {
REBOOT_NONE,
REBOOT_NORMAL,
REBOOT_BOOTLOADER,
REBOOT_BOOTLOADER_DFU,
} reboot_type_t;
static reboot_type_t s_queue_reboot = REBOOT_NONE;
static int s_prev_rts_state;
static intr_handle_t s_usb_int_handle;
static cdc_acm_device *s_cdc_acm_device;
static char s_usb_tx_buf[ACM_BYTES_PER_TX];
static size_t s_usb_tx_buf_pos;
static uint8_t cdcmem[CDC_WORK_BUF_SIZE];
static esp_usb_console_cb_t s_rx_cb;
static esp_usb_console_cb_t s_tx_cb;
static void *s_cb_arg;
#ifdef CONFIG_ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF
static spinlock_t s_write_lock = SPINLOCK_INITIALIZER;
void esp_usb_console_write_char(char c);
#define ISR_FLAG ESP_INTR_FLAG_IRAM
#else
#define ISR_FLAG 0
#endif // CONFIG_ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF
/* Optional write lock routines; used only if esp_rom_printf output via CDC is enabled */
static inline void write_lock_acquire(void);
static inline void write_lock_release(void);
/* The two functions below need to be revisited in the multicore case TODO ESP32-S3 IDF-2048*/
_Static_assert(SOC_CPU_CORES_NUM == 1, "usb_osglue_*_int is not multicore capable");
/* Called by ROM to disable the interrupts
* Non-static to allow placement into IRAM by ldgen.
*/
void esp_usb_console_osglue_dis_int(void)
{
if (s_usb_int_handle) {
esp_intr_disable(s_usb_int_handle);
}
}
/* Called by ROM to enable the interrupts
* Non-static to allow placement into IRAM by ldgen.
*/
void esp_usb_console_osglue_ena_int(void)
{
if (s_usb_int_handle) {
esp_intr_enable(s_usb_int_handle);
}
}
/* Delay function called by ROM USB driver.
* Non-static to allow placement into IRAM by ldgen.
*/
int esp_usb_console_osglue_wait_proc(int delay_us)
{
if (xTaskGetSchedulerState() != taskSCHEDULER_RUNNING ||
!xPortCanYield()) {
esp_rom_delay_us(delay_us);
return delay_us;
}
if (delay_us == 0) {
/* We should effectively yield */
vPortYield();
return 1;
} else {
/* Just delay */
int ticks = MAX(delay_us / (portTICK_PERIOD_MS * 1000), 1);
vTaskDelay(ticks);
return ticks * portTICK_PERIOD_MS * 1000;
}
}
/* Called by ROM CDC ACM driver from interrupt context./
* Non-static to allow placement into IRAM by ldgen.
*/
void esp_usb_console_cdc_acm_cb(cdc_acm_device *dev, int status)
{
if (status == USB_DC_RESET || status == USB_DC_CONNECTED) {
s_prev_rts_state = 0;
} else if (status == ACM_STATUS_LINESTATE_CHANGED) {
uint32_t rts, dtr;
cdc_acm_line_ctrl_get(dev, LINE_CTRL_RTS, &rts);
cdc_acm_line_ctrl_get(dev, LINE_CTRL_DTR, &dtr);
if (!rts && s_prev_rts_state) {
if (dtr) {
s_queue_reboot = REBOOT_BOOTLOADER;
} else {
s_queue_reboot = REBOOT_NORMAL;
}
}
s_prev_rts_state = rts;
} else if (status == ACM_STATUS_RX && s_rx_cb) {
(*s_rx_cb)(s_cb_arg);
} else if (status == ACM_STATUS_TX && s_tx_cb) {
(*s_tx_cb)(s_cb_arg);
}
}
/* Non-static to allow placement into IRAM by ldgen. */
void esp_usb_console_dfu_detach_cb(int timeout)
{
s_queue_reboot = REBOOT_BOOTLOADER_DFU;
}
/* USB interrupt handler, forward the call to the ROM driver.
* Non-static to allow placement into IRAM by ldgen.
*/
void esp_usb_console_interrupt(void *arg)
{
usb_dc_check_poll_for_interrupts();
/* Restart can be requested from esp_usb_console_cdc_acm_cb or esp_usb_console_dfu_detach_cb */
if (s_queue_reboot != REBOOT_NONE) {
esp_restart();
}
}
/* Call the USB interrupt handler while any interrupts are pending,
* but not more than a few times.
* Non-static to allow placement into IRAM by ldgen.
*/
void esp_usb_console_poll_interrupts(void)
{
const int max_poll_count = 10;
for (int i = 0; (USB0.gintsts & USB0.gintmsk) != 0 && i < max_poll_count; i++) {
usb_dc_check_poll_for_interrupts();
}
}
/* This function gets registered as a restart handler.
* Prepares USB peripheral for restart and sets up persistence.
* Non-static to allow placement into IRAM by ldgen.
*/
void esp_usb_console_before_restart(void)
{
esp_usb_console_poll_interrupts();
usb_dc_prepare_persist();
if (s_queue_reboot == REBOOT_BOOTLOADER) {
chip_usb_set_persist_flags(USBDC_PERSIST_ENA);
REG_WRITE(RTC_CNTL_OPTION1_REG, RTC_CNTL_FORCE_DOWNLOAD_BOOT);
} else if (s_queue_reboot == REBOOT_BOOTLOADER_DFU) {
chip_usb_set_persist_flags(USBDC_BOOT_DFU);
REG_WRITE(RTC_CNTL_OPTION1_REG, RTC_CNTL_FORCE_DOWNLOAD_BOOT);
} else {
chip_usb_set_persist_flags(USBDC_PERSIST_ENA);
esp_usb_console_poll_interrupts();
}
}
/* Reset some static state in ROM, which survives when going from the
* 2nd stage bootloader into the app. This cleans some variables which
* indicates that the driver is already initialized, allowing us to
* initialize it again, in the app.
*/
static void esp_usb_console_rom_cleanup(void)
{
/* TODO ESP32-S3 IDF-2987 */
// extern char rom_usb_dev, rom_usb_dev_end;
// extern char rom_usb_dw_ctrl, rom_usb_dw_ctrl_end;
// uart_acm_dev = NULL;
// memset((void *) &rom_usb_dev, 0, &rom_usb_dev_end - &rom_usb_dev);
// memset((void *) &rom_usb_dw_ctrl, 0, &rom_usb_dw_ctrl_end - &rom_usb_dw_ctrl);
}
esp_err_t esp_usb_console_init(void)
{
esp_err_t err;
err = esp_register_shutdown_handler(esp_usb_console_before_restart);
if (err != ESP_OK) {
return err;
}
esp_usb_console_rom_cleanup();
/* Install OS hooks */
s_usb_osglue.int_dis_proc = esp_usb_console_osglue_dis_int;
s_usb_osglue.int_ena_proc = esp_usb_console_osglue_ena_int;
s_usb_osglue.wait_proc = esp_usb_console_osglue_wait_proc;
/* Install interrupt.
* In case of ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF:
* Note that this the interrupt handler has to be placed into IRAM because
* the interrupt handler can also be called in polling mode, when
* interrupts are disabled, and a write to USB is performed with cache disabled.
* Since the handler function is in IRAM, we can register the interrupt as IRAM capable.
* It is not because we actually need the interrupt to work with cache disabled!
*/
err = esp_intr_alloc(ETS_USB_INTR_SOURCE, ISR_FLAG | ESP_INTR_FLAG_INTRDISABLED,
esp_usb_console_interrupt, NULL, &s_usb_int_handle);
if (err != ESP_OK) {
esp_unregister_shutdown_handler(esp_usb_console_before_restart);
return err;
}
/* Initialize USB / CDC */
s_cdc_acm_device = cdc_acm_init(cdcmem, CDC_WORK_BUF_SIZE);
usb_dc_check_poll_for_interrupts();
/* Set callback for handling DTR/RTS lines and TX/RX events */
cdc_acm_irq_callback_set(s_cdc_acm_device, esp_usb_console_cdc_acm_cb);
cdc_acm_irq_state_enable(s_cdc_acm_device);
/* Set callback for handling DFU detach */
usb_dfu_set_detach_cb(esp_usb_console_dfu_detach_cb);
/* Enable interrupts on USB peripheral side */
USB0.gahbcfg |= USB_GLBLLNTRMSK_M;
/* Enable the interrupt handler */
esp_intr_enable(s_usb_int_handle);
#ifdef CONFIG_ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF
/* Install esp_rom_printf handler */
ets_install_putc1(&esp_usb_console_write_char);
#endif // CONFIG_ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF
return ESP_OK;
}
/* Non-static to allow placement into IRAM by ldgen.
* Must be called with the write lock held.
*/
ssize_t esp_usb_console_flush_internal(size_t last_write_size)
{
if (s_usb_tx_buf_pos == 0) {
return 0;
}
assert(s_usb_tx_buf_pos >= last_write_size);
ssize_t ret;
size_t tx_buf_pos_before = s_usb_tx_buf_pos - last_write_size;
int sent = cdc_acm_fifo_fill(s_cdc_acm_device, (const uint8_t*) s_usb_tx_buf, s_usb_tx_buf_pos);
if (sent == last_write_size) {
/* everything was sent */
ret = last_write_size;
s_usb_tx_buf_pos = 0;
} else if (sent == 0) {
/* nothing was sent, roll back to the original state */
ret = 0;
s_usb_tx_buf_pos = tx_buf_pos_before;
} else {
/* Some data was sent, but not all of the buffer.
* We can still tell the caller that all the new data
* was "sent" since it is in the buffer now.
*/
ret = last_write_size;
memmove(s_usb_tx_buf, s_usb_tx_buf + sent, s_usb_tx_buf_pos - sent);
s_usb_tx_buf_pos = s_usb_tx_buf_pos - sent;
}
return ret;
}
ssize_t esp_usb_console_flush(void)
{
if (s_cdc_acm_device == NULL) {
return -1;
}
write_lock_acquire();
int ret = esp_usb_console_flush_internal(0);
write_lock_release();
return ret;
}
ssize_t esp_usb_console_write_buf(const char* buf, size_t size)
{
if (s_cdc_acm_device == NULL) {
return -1;
}
if (size == 0) {
return 0;
}
write_lock_acquire();
ssize_t tx_buf_available = ACM_BYTES_PER_TX - s_usb_tx_buf_pos;
ssize_t will_write = MIN(size, tx_buf_available);
memcpy(s_usb_tx_buf + s_usb_tx_buf_pos, buf, will_write);
s_usb_tx_buf_pos += will_write;
ssize_t ret;
if (s_usb_tx_buf_pos == ACM_BYTES_PER_TX || buf[size - 1] == '\n') {
/* Buffer is full, or a newline is found.
* For binary streams, we probably shouldn't do line buffering,
* but text streams are likely going to be the most common case.
*/
ret = esp_usb_console_flush_internal(will_write);
} else {
/* nothing sent out yet, but all the new data is in the buffer now */
ret = will_write;
}
write_lock_release();
return ret;
}
ssize_t esp_usb_console_read_buf(char *buf, size_t buf_size)
{
if (s_cdc_acm_device == NULL) {
return -1;
}
if (!esp_usb_console_read_available()) {
return 0;
}
int bytes_read = cdc_acm_fifo_read(s_cdc_acm_device, (uint8_t*) buf, buf_size);
return bytes_read;
}
esp_err_t esp_usb_console_set_cb(esp_usb_console_cb_t rx_cb, esp_usb_console_cb_t tx_cb, void *arg)
{
if (s_cdc_acm_device == NULL) {
return ESP_ERR_INVALID_STATE;
}
s_rx_cb = rx_cb;
if (s_rx_cb) {
cdc_acm_irq_rx_enable(s_cdc_acm_device);
} else {
cdc_acm_irq_rx_disable(s_cdc_acm_device);
}
s_tx_cb = tx_cb;
if (s_tx_cb) {
cdc_acm_irq_tx_enable(s_cdc_acm_device);
} else {
cdc_acm_irq_tx_disable(s_cdc_acm_device);
}
s_cb_arg = arg;
return ESP_OK;
}
bool esp_usb_console_read_available(void)
{
if (s_cdc_acm_device == NULL) {
return false;
}
return cdc_acm_rx_fifo_cnt(s_cdc_acm_device) > 0;
}
bool esp_usb_console_write_available(void)
{
if (s_cdc_acm_device == NULL) {
return false;
}
return cdc_acm_irq_tx_ready(s_cdc_acm_device) != 0;
}
#ifdef CONFIG_ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF
/* Used as an output function by esp_rom_printf.
* The LF->CRLF replacement logic replicates the one in esp_rom_uart_putc.
* Not static to allow placement into IRAM by ldgen.
*/
void esp_usb_console_write_char(char c)
{
char cr = '\r';
char lf = '\n';
if (c == lf) {
esp_usb_console_write_buf(&cr, 1);
esp_usb_console_write_buf(&lf, 1);
} else if (c == '\r') {
} else {
esp_usb_console_write_buf(&c, 1);
}
}
static inline void write_lock_acquire(void)
{
spinlock_acquire(&s_write_lock, SPINLOCK_WAIT_FOREVER);
}
static inline void write_lock_release(void)
{
spinlock_release(&s_write_lock);
}
#else // CONFIG_ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF
static inline void write_lock_acquire(void)
{
}
static inline void write_lock_release(void)
{
}
#endif // CONFIG_ESP_CONSOLE_USB_CDC_SUPPORT_ETS_PRINTF