002f38fa8f
SD SPI mode driver This MR adds functionality to support SD cards connected via SPI interface. Additionally, two bugs are fixed: - Definition of `SPI_TRANS_MODE_DIOQIO_ADDR` in spi_master driver - SD card probing frequency was 4000kHz instead of 400kHz as required by the standard See merge request !727 |
||
|---|---|---|
| .. | ||
| bluetooth | ||
| ethernet | ||
| get-started | ||
| performance | ||
| peripherals | ||
| protocols | ||
| storage | ||
| system | ||
| wifi | ||
| README.md | ||
Examples
This directory contains a growing number of simple example projects for esp-idf. These are intended to show basic esp-idf functionality, and to provide you can use for your own projects.
Using Examples
Building examples is the same as building any other project:
-
Follow the setup instructions in the top-level esp-idf README.
-
Set
IDF_PATHenvironment variable to point to the path to the esp-idf top-level directory. -
Change into the directory of the example you'd like to build.
-
make menuconfigto configure the example. Most examples require a simple WiFi SSID & password via this configuration. -
maketo build the example. -
Follow the printed instructions to flash, or run
make flash.
Copying Examples
Each example is a standalone project. The examples do not have to be inside the esp-idf directory. You can copy an example directory to anywhere on your computer in order to make a copy that you can modify and work with.
The IDF_PATH environment variable is the only thing that connects the example to the rest of the esp-idf system.
If you're looking for a more bare-bones project to start from, try esp-idf-template.
Contributing Examples
If you have a new example you think we'd like, please consider sending it to us as a Pull Request.
Please read the esp-idf CONTRIBUTING.rst file which lays out general contribution rules.
In addition, here are some tips for creating good examples:
- A good example is documented and the basic options can be configured.
- A good example does not contain a lot of code. If there is a lot of generic code in the example, consider refactoring that code into a standalone component and then use the component's API in your example.
- Names (of files, functions, variables, etc.) inside examples should be distinguishable from names of other parts of IDF (ideally, use
examplein names.) - Functions and variables used inside examples should be declared static where possible.
- Examples should demonstrate one distinct thing each. Avoid multi-purposed "demo" examples, split these into multiple examples instead.
- Examples must be licensed under the Apache License 2.0 or (preferably for examples) if possible you can declare the example to be Public Domain / Creative Commons Zero.