mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
97 lines
3.0 KiB
ReStructuredText
97 lines
3.0 KiB
ReStructuredText
I2S
|
|
===
|
|
|
|
Overview
|
|
--------
|
|
|
|
ESP32 contains two I2S peripherals. These peripherals can be configured to input and output sample data via the I2S driver.
|
|
|
|
The I2S peripheral supports DMA meaning it can stream sample data without requiring each sample to be read or written by the CPU.
|
|
|
|
I2S output can also be routed directly to the Digital/Analog Converter output channels (GPIO 25 & GPIO 26) to produce analog output directly, rather than via an external I2S codec.
|
|
|
|
.. note:: For high accuracy clock applications, APLL clock source can be used with `.use_apll = 1` and ESP32 will automatic caculate APLL parameter.
|
|
|
|
Application Example
|
|
-------------------
|
|
|
|
A full I2S example is available in esp-idf: :example:`peripherals/i2s`.
|
|
|
|
Short example of I2S configuration:
|
|
|
|
.. highlight:: c
|
|
|
|
::
|
|
|
|
#include "driver/i2s.h"
|
|
#include "freertos/queue.h"
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
static const i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = 16,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
|
|
.intr_alloc_flags = 0, // default interrupt priority
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.use_apll = 0
|
|
};
|
|
|
|
static const i2s_pin_config_t pin_config = {
|
|
.bck_io_num = 26,
|
|
.ws_io_num = 25,
|
|
.data_out_num = 22,
|
|
.data_in_num = I2S_PIN_NO_CHANGE
|
|
};
|
|
|
|
...
|
|
|
|
i2s_driver_install(i2s_num, &i2s_config, 0, NULL); //install and start i2s driver
|
|
|
|
i2s_set_pin(i2s_num, &pin_config);
|
|
|
|
i2s_set_sample_rates(i2s_num, 22050); //set sample rates
|
|
|
|
i2s_driver_uninstall(i2s_num); //stop & destroy i2s driver
|
|
|
|
Short example configuring I2S to use internal DAC for analog output::
|
|
|
|
#include "driver/i2s.h"
|
|
#include "freertos/queue.h"
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
static const i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX | I2S_MODE_DAC_BUILT_IN,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = 16, /* the DAC module will only take the 8bits from MSB */
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S_MSB,
|
|
.intr_alloc_flags = 0, // default interrupt priority
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.use_apll = 0
|
|
};
|
|
|
|
...
|
|
|
|
i2s_driver_install(i2s_num, &i2s_config, 0, NULL); //install and start i2s driver
|
|
|
|
i2s_set_pin(i2s_num, NULL); //for internal DAC, this will enable both of the internal channels
|
|
|
|
//You can call i2s_set_dac_mode to set built-in DAC output mode.
|
|
//i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
|
|
|
|
i2s_set_sample_rates(i2s_num, 22050); //set sample rates
|
|
|
|
i2s_driver_uninstall(i2s_num); //stop & destroy i2s driver
|
|
|
|
API Reference
|
|
-------------
|
|
|
|
.. include:: /_build/inc/i2s.inc
|
|
|