mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
60 lines
2.5 KiB
Markdown
60 lines
2.5 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
|
|
|
# SPIFFS example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example demonstrates how to use SPIFFS with ESP32. Example does the following steps:
|
|
|
|
1. Use an "all-in-one" `esp_vfs_spiffs_register` function to:
|
|
- initialize SPIFFS,
|
|
- mount SPIFFS filesystem using SPIFFS library (and format, if the filesystem can not be mounted),
|
|
- register SPIFFS filesystem in VFS, enabling C standard library and POSIX functions to be used.
|
|
2. Create a file using `fopen` and write to it using `fprintf`.
|
|
3. Rename the file. Before renaming, check if destination file already exists using `stat` function, and remove it using `unlink` function.
|
|
4. Open renamed file for reading, read back the line, and print it to the terminal.
|
|
|
|
SPIFFS partition size is set in partitions_example.csv file. See [Partition Tables](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/partition-tables.html) documentation for more information.
|
|
|
|
## How to use example
|
|
|
|
### Hardware required
|
|
|
|
This example does not require any special hardware, and can be run on any common development board.
|
|
|
|
### Configure the project
|
|
|
|
* Open the project configuration menu (`idf.py menuconfig`)
|
|
* Configure SPIFFS settings under "SPIFFS Example menu". See note about `esp_spiffs_check` function on [SPIFFS Filesystem](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/storage/spiffs.html) page.
|
|
|
|
### Build and flash
|
|
|
|
Replace PORT with serial port name:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example output
|
|
|
|
Here is an example console output. In this case `format_if_mount_failed` parameter was set to `true` in the source code. SPIFFS was unformatted, so the initial mount has failed. SPIFFS was then formatted, and mounted again.
|
|
|
|
```
|
|
I (324) example: Initializing SPIFFS
|
|
W (324) SPIFFS: mount failed, -10025. formatting...
|
|
I (19414) example: Partition size: total: 896321, used: 0
|
|
I (19414) example: Opening file
|
|
I (19504) example: File written
|
|
I (19544) example: Renaming file
|
|
I (19584) example: Reading file
|
|
I (19584) example: Read from file: 'Hello World!'
|
|
I (19584) example: SPIFFS unmounted
|
|
```
|
|
|
|
To erase the contents of SPIFFS partition, run `idf.py erase-flash` command. Then upload the example again as described above.
|