esp-idf/components/bt/bluedroid/osi/include/thread.h
wangmengyang 9bfb2f0cab component/bt: make A2DP sink task size configurable through menuconfig
1. make the A2DP sink task stack size configurable through menuconfig

# Conflicts:
#	components/bt/Kconfig
#	components/bt/bluedroid/api/include/esp_a2dp_api.h
#	components/bt/bluedroid/btc/profile/std/a2dp/btc_a2dp_sink.c
#	components/bt/bluedroid/btc/profile/std/a2dp/btc_a2dp_source.c
#	components/bt/bluedroid/osi/include/thread.h
2018-02-05 19:47:58 +08:00

109 lines
3.9 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __THREAD_H__
#define __THREAD_H__
#include "freertos/xtensa_api.h"
#include "freertos/FreeRTOSConfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/queue.h"
#include "freertos/task.h"
#include "esp_task.h"
#include "bt_defs.h"
#define portBASE_TYPE int
struct bt_task_evt {
uint32_t sig; //task sig
void *par; //point to task param
void *cb; //point to function cb
void *arg; //point to function arg
};
typedef struct bt_task_evt BtTaskEvt_t;
typedef bt_status_t (* BtTaskCb_t)(void *arg);
typedef enum {
SIG_HCI_HAL_RECV_PACKET = 0,
SIG_HCI_HAL_NUM,
} SIG_HCI_HAL_t;
typedef enum {
SIG_HCI_HOST_SEND_AVAILABLE = 0,
SIG_HCI_HOST_NUM,
} SIG_HCI_HOST_t;
typedef enum {
SIG_BTU_START_UP = 0,
SIG_BTU_HCI_MSG,
SIG_BTU_BTA_MSG,
SIG_BTU_BTA_ALARM,
SIG_BTU_GENERAL_ALARM,
SIG_BTU_ONESHOT_ALARM,
SIG_BTU_L2CAP_ALARM,
SIG_BTU_NUM,
} SIG_BTU_t;
#define TASK_PINNED_TO_CORE (CONFIG_BLUEDROID_PINNED_TO_CORE < portNUM_PROCESSORS ? CONFIG_BLUEDROID_PINNED_TO_CORE : tskNO_AFFINITY)
#define HCI_HOST_TASK_PINNED_TO_CORE (TASK_PINNED_TO_CORE)
#define HCI_HOST_TASK_STACK_SIZE (2048 + BT_TASK_EXTRA_STACK_SIZE)
#define HCI_HOST_TASK_PRIO (configMAX_PRIORITIES - 3)
#define HCI_HOST_TASK_NAME "hciHostT"
#define HCI_HOST_QUEUE_LEN 40
#define HCI_H4_TASK_PINNED_TO_CORE (TASK_PINNED_TO_CORE)
#define HCI_H4_TASK_STACK_SIZE (2048 + BT_TASK_EXTRA_STACK_SIZE)
#define HCI_H4_TASK_PRIO (configMAX_PRIORITIES - 4)
#define HCI_H4_TASK_NAME "hciH4T"
#define HCI_H4_QUEUE_LEN 60
#define BTU_TASK_PINNED_TO_CORE (TASK_PINNED_TO_CORE)
#define BTU_TASK_STACK_SIZE (4096 + BT_TASK_EXTRA_STACK_SIZE)
#define BTU_TASK_PRIO (configMAX_PRIORITIES - 5)
#define BTU_TASK_NAME "btuT"
#define BTU_QUEUE_LEN 50
#define BTC_TASK_PINNED_TO_CORE (TASK_PINNED_TO_CORE)
#define BTC_TASK_STACK_SIZE (CONFIG_BTC_TASK_STACK_SIZE + BT_TASK_EXTRA_STACK_SIZE) //by menuconfig
#define BTC_TASK_NAME "btcT"
#define BTC_TASK_PRIO (configMAX_PRIORITIES - 6)
#define BTC_TASK_QUEUE_LEN 60
#define BTC_A2DP_SINK_TASK_PINNED_TO_CORE (TASK_PINNED_TO_CORE)
#define BTC_A2DP_SINK_TASK_STACK_SIZE (CONFIG_A2DP_SINK_TASK_STACK_SIZE + BT_TASK_EXTRA_STACK_SIZE) // by menuconfig
#define BTC_A2DP_SINK_TASK_NAME "BtA2dSinkT"
#define BTC_A2DP_SINK_TASK_PRIO (configMAX_PRIORITIES - 3)
#define BTC_A2DP_SINK_DATA_QUEUE_LEN (1)
#define BTC_A2DP_SINK_CTRL_QUEUE_LEN (5)
#define BTC_A2DP_SINK_TASK_QUEUE_SET_LEN (BTC_A2DP_SINK_DATA_QUEUE_LEN + BTC_A2DP_SINK_CTRL_QUEUE_LEN)
#define TASK_POST_NON_BLOCKING (0)
#define TASK_POST_BLOCKING (portMAX_DELAY)
typedef uint32_t task_post_t; /* Timeout of task post return, unit TICK */
typedef enum {
TASK_POST_SUCCESS = 0,
TASK_POST_FAIL,
} task_post_status_t;
task_post_status_t btu_task_post(uint32_t sig, void *param, task_post_t timeout);
task_post_status_t hci_host_task_post(task_post_t timeout);
task_post_status_t hci_hal_h4_task_post(task_post_t timeout);
#endif /* __THREAD_H__ */