esp-idf/examples/bluetooth/esp_ble_mesh/ble_mesh_node/README.md
Hrishikesh Dhayagude cba69dd088 Bluetooth examples restructuring
The existing Bluetooth examples are split as:

1. examples/bluetooth/bluedroid - Bluedroid Host (BT + BLE) examples
   a. examples/bluetooth/bluedroid/classic_bt - Classic BT examples
   b. examples/bluetooth/bluedroid/ble - BLE examples
   c. examples/bluetooth/bluedroid/coex - Classic BT and BLE coex examples
   d. examples/bluetooth/bluedroid/hci - VHCI and HCI UART examples
      i. Rename ble_adv to controller_vhci_ble_adv and move it in hci folder
2. examples/bluetooth/nimble - NimBLE BLE Host + NimBLE Mesh examples
3. examples/bluetooth/esp_ble_mesh - ESP BLE Mesh examples
4. Update documentation references
2019-07-01 19:21:57 +08:00

1.2 KiB
Raw Blame History

ESP BLE Mesh Node demo

This demo shows how BLE Mesh device can be set up as a node with the following features:

  • One element
  • Two SIG models
    • Configuration Server model: The role of this model is mainly to configure Provisioner devices AppKey and set up its relay function, TTL size, subscription, etc.
    • OnOff Server model: This model implements the most basic function of turning the lights on and off.

The default purpose of this demo is to enable the advertising function with 20-ms non-connectable interval in BLE 5.0. You can disable this function through menuconfig: make menuconfig --> Example Configuration --> This option facilitates sending with 20ms non-connectable interval...

For a better demonstration effect, an RGB LED can be soldered onto the ESP32-DevKitC board, by connecting their corresponding GPIO pins are GPIO_NUM_25, GPIO_NUM_26, GPIO_NUM_27. Then you need to select the following option in menuconfig: make menuconfig --> Example Configuration --> Board selection for BLE Mesh --> ESP-WROOM-32

Please check the tutorial for more information about this example.