alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
cb4b433ddc
esp-idf/examples/system/ulp/ulp_riscv/interrupts
History
Sudeep Mohanty bc74cf808d feat(ulp-riscv): Added Kconfig option to enable ULP RISC-V interrupts 
This commit adds a Kconfig option, CONFIG_ULP_RISCV_INTERRUPT_ENABLE, to
enable interrupts on the ULP RISC-V core on the esp32s2 and esp32s3.
2024-02-21 11:45:06 +01:00
..
main feat(ulp-riscv): Added new example to demonstrate ULP RISC-V interrupts 2024-01-18 15:59:49 +01:00
CMakeLists.txt feat(ulp-riscv): Added new example to demonstrate ULP RISC-V interrupts 2024-01-18 15:59:49 +01:00
pytest_ulp_riscv_interrupts.py feat(ulp-riscv): Added new example to demonstrate ULP RISC-V interrupts 2024-01-18 15:59:49 +01:00
README.md feat(ulp-riscv): Added new example to demonstrate ULP RISC-V interrupts 2024-01-18 15:59:49 +01:00
sdkconfig.defaults feat(ulp-riscv): Added Kconfig option to enable ULP RISC-V interrupts 2024-02-21 11:45:06 +01:00

README.md

Supported Targets ESP32-S2 ESP32-S3

ULP-RISC-V Interrupt Handling:

This example demonstrates how the ULP-RISC-V coprocessor can register and handle interrupts. Currently this example supports handling of -

  • Software triggered interrupts
  • RTC IO triggered interrupts

The example keeps a count of the software interrupts triggered on the ULP RISC-V core and wakes up the main processor from deep sleep after a certain threshold. Additionaly, it wakes up the main processor from deep sleep when a button is pressed and the GPIO interrupt is triggered.

How to use example

Hardware Required

The example can be run on any ESP32-S2 or ESP32-S3 based development board connected to a computer with a single USB cable for flashing and monitoring. The external interface should have 3.3V outputs. You may use e.g. 3.3V compatible USB-to-Serial dongle.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

By default, this example uses GPIO#0 which is connected to the "Boot" button on esp32-s2/s3 development boards. To trigger the GPIO interrupt on the ULP RISC-V core, press the Boot button.

Example Output

Output from main CPU:

Not a ULP RISC-V wakeup, initializing it!
Entering in deep sleep

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x5 (DSLEEP),boot:0x8 (SPI_FAST_FLASH_BOOT)
pro cpu reset by JTAG
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3810,len:0x12b4
load:0x403c9700,len:0x4
load:0x403c9704,len:0xaf4
load:0x403cc700,len:0x2bcc
entry 0x403c9898
W (91) spi_flash: Detected size(8192k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
ULP RISC-V woke up the main CPU!
ULP RISC-V SW Interrupt triggered 5 times.
Entering in deep sleep

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x5 (DSLEEP),boot:0x8 (SPI_FAST_FLASH_BOOT)
pro cpu reset by JTAG
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3810,len:0x12b4
load:0x403c9700,len:0x4
load:0x403c9704,len:0xaf4
load:0x403cc700,len:0x2bcc
entry 0x403c9898
W (91) spi_flash: Detected size(8192k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
ULP RISC-V woke up the main CPU!
ULP RISC-V GPIO Interrupt triggered.
Entering in deep sleep