mirror of
https://github.com/espressif/esp-idf.git
synced 2024-09-21 06:56:11 -04:00
224ba396f1
In esp_eth_test_apps.c: Add test of loopback functionality. Change speed/duplex/autonegotiation test - remove need to enable loopback (required for it to work on some phys supported by ESP-IDF) In Kconfig.projbuild: Add parameters to select which configuration is used - standard or custom. Add for custom configuration parameters to select MDC and MDIO pins (required to work with WESP-32 and other boards that use non-standard pin assignments). In esp_eth_test_common.c: Add code to support changes made in Kconfig In sdkconfig.ci.default_rtl8201: Change config which is used. Now custom is used and MDC is gpio 16, MDIO is gpio 17. Reuqired to work with WESP-32 In esp_eth_phy_802_3.h: Make 802.3 API public. In esp_eth_phy_802_3.c: Add loopback check in eth_phy_802_3_set_duplex(). Now ESP_ERR_INVALID_STATE is invoked on attempt to set duplex to half when loopback is enabled. Remove static property from esp_eth_phy_802_3_autonego_ctrl and esp_eth_phy_802_3_loopback. In esp_eth_phy_dm9051.c: Add dm9051_loopback() because DM9051 requires setting additional bit to enable auto-negotiation loopback for data to be received. Add dm9051_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is enabled because such speed configuration is unsupported. In esp_eth_phy_ksz80xx.c: Add ksz80xx_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is enabled because such speed configuration is unsupported. In esp_eth_phy_ksz8851snl.c: Change phy_ksz8851_set_duplex() to invoke ESP_ERR_INVALID_STATE on attempt to set duplex to half when loopback is enabled. In esp_eth_phy_dp83848.c, esp_eth_phy_rtl8201.c: Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled. Add loopback implementation which disables autonegotiation prior to enabling loopback. In esp_eth_phy_lan87xx.c: Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled. Add loopback implementation which disables autonegotiation prior to enabling loopback. Fix link indicating being down when loopback is enabled by force setting link up.
276 lines
9.5 KiB
C
276 lines
9.5 KiB
C
/*
|
||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||
*
|
||
* SPDX-License-Identifier: Apache-2.0
|
||
*/
|
||
#pragma once
|
||
|
||
#include <stdbool.h>
|
||
#include "esp_eth.h"
|
||
#include "sdkconfig.h"
|
||
#include "eth_phy_802_3_regs.h"
|
||
|
||
#ifdef __cplusplus
|
||
extern "C" {
|
||
#endif
|
||
|
||
/**
|
||
* @brief IEEE 802.3 PHY object infostructure
|
||
*
|
||
*/
|
||
typedef struct {
|
||
esp_eth_phy_t parent; /*!< Parent Ethernet PHY instance */
|
||
esp_eth_mediator_t *eth; /*!< Mediator of Ethernet driver */
|
||
int addr; /*!< PHY address */
|
||
uint32_t reset_timeout_ms; /*!< Reset timeout value (Unit: ms) */
|
||
uint32_t autonego_timeout_ms; /*!< Auto-negotiation timeout value (Unit: ms) */
|
||
eth_link_t link_status; /*!< Current Link status */
|
||
int reset_gpio_num; /*!< Reset GPIO number, -1 means no hardware reset */
|
||
} phy_802_3_t;
|
||
|
||
/**
|
||
* @brief Set Ethernet mediator
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param eth Ethernet mediator pointer
|
||
* @return
|
||
* - ESP_OK: Ethermet mediator set successfuly
|
||
* - ESP_ERR_INVALID_ARG: if @c eth is @c NULL
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_mediator(phy_802_3_t *phy_802_3, esp_eth_mediator_t *eth);
|
||
|
||
/**
|
||
* @brief Reset PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY reset successfuly
|
||
* - ESP_FAIL: reset Ethernet PHY failed because some error occured
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_reset(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Control autonegotiation mode of Ethernet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param cmd autonegotiation command enumeration
|
||
* @param[out] autonego_en_stat autonegotiation enabled flag
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY autonegotiation configured successfuly
|
||
* - ESP_FAIL: Ethernet PHY autonegotiation configuration fail because some error occured
|
||
* - ESP_ERR_INVALID_ARG: invalid value of @c cmd
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_autonego_ctrl(phy_802_3_t *phy_802_3, eth_phy_autoneg_cmd_t cmd, bool *autonego_en_stat);
|
||
|
||
/**
|
||
* @brief Power control of Ethernet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param enable set true to power ON Ethernet PHY; set false to power OFF Ethernet PHY
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY power down mode set successfuly
|
||
* - ESP_FAIL: Ethernet PHY power up or power down failed because some error occured
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_pwrctl(phy_802_3_t *phy_802_3, bool enable);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY address
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param addr new PHY address
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY address set
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_addr(phy_802_3_t *phy_802_3, uint32_t addr);
|
||
|
||
/**
|
||
* @brief Get Ethernet PHY address
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param[out] addr Ethernet PHY address
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY address read successfuly
|
||
* - ESP_ERR_INVALID_ARG: @c addr pointer is @c NULL
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_get_addr(phy_802_3_t *phy_802_3, uint32_t *addr);
|
||
|
||
/**
|
||
* @brief Advertise pause function ability
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param ability enable or disable pause ability
|
||
* @return
|
||
* - ESP_OK: pause ability set successfuly
|
||
* - ESP_FAIL: Advertise pause function ability failed because some error occured
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_advertise_pause_ability(phy_802_3_t *phy_802_3, uint32_t ability);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY loopback mode
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param enable set true to enable loopback; set false to disable loopback
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY loopback mode set successfuly
|
||
* - ESP_FAIL: Ethernet PHY loopback configuration failed because some error occured
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_loopback(phy_802_3_t *phy_802_3, bool enable);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY speed
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param speed new speed of Ethernet PHY link
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY speed set successfuly
|
||
* - ESP_FAIL: Set Ethernet PHY speed failed because some error occured
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_speed(phy_802_3_t *phy_802_3, eth_speed_t speed);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY duplex mode
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param duplex new duplex mode for Ethernet PHY link
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY duplex mode set successfuly
|
||
* - ESP_ERR_INVALID_STATE: unable to set duplex mode to Half if loopback is enabled
|
||
* - ESP_FAIL: Set Ethernet PHY duplex mode failed because some error occured
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_duplex(phy_802_3_t *phy_802_3, eth_duplex_t duplex);
|
||
|
||
/**
|
||
* @brief Initialize Ethernet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY initialized successfuly
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_init(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Power off Eternet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY powered off successfuly
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_deinit(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Delete Ethernet PHY infostructure
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethrnet PHY infostructure deleted
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_del(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Performs hardware reset with specific reset pin assertion time
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param reset_assert_us Hardware reset pin assertion time
|
||
* @return
|
||
* - ESP_OK: reset Ethernet PHY successfully
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_reset_hw(phy_802_3_t *phy_802_3, uint32_t reset_assert_us);
|
||
|
||
/**
|
||
* @brief Detect PHY address
|
||
*
|
||
* @param eth Mediator of Ethernet driver
|
||
* @param[out] detected_addr: a valid address after detection
|
||
* @return
|
||
* - ESP_OK: detect phy address successfully
|
||
* - ESP_ERR_INVALID_ARG: invalid parameter
|
||
* - ESP_ERR_NOT_FOUND: can't detect any PHY device
|
||
* - ESP_FAIL: detect phy address failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_detect_phy_addr(esp_eth_mediator_t *eth, int *detected_addr);
|
||
|
||
/**
|
||
* @brief Performs basic PHY chip initialization
|
||
*
|
||
* @note It should be called as the first function in PHY specific driver instance
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: initialized Ethernet PHY successfully
|
||
* - ESP_FAIL: initialization of Ethernet PHY failed because some error occurred
|
||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||
* - ESP_ERR_NOT_FOUND: PHY device not detected
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_basic_phy_init(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Performs basic PHY chip de-initialization
|
||
*
|
||
* @note It should be called as the last function in PHY specific driver instance
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: de-initialized Ethernet PHY successfully
|
||
* - ESP_FAIL: de-initialization of Ethernet PHY failed because some error occurred
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_basic_phy_deinit(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Reads raw content of OUI field
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param[out] oui OUI value
|
||
* @return
|
||
* - ESP_OK: OUI field read successfully
|
||
* - ESP_FAIL: OUI field read failed because some error occurred
|
||
* - ESP_ERR_INVALID_ARG: invalid @c oui argument
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_read_oui(phy_802_3_t *phy_802_3, uint32_t *oui);
|
||
|
||
/**
|
||
* @brief Reads manufacturer’s model and revision number
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param[out] model Manufacturer’s model number (can be NULL when not required)
|
||
* @param[out] rev Manufacturer’s revision number (can be NULL when not required)
|
||
* @return
|
||
* - ESP_OK: Manufacturer’s info read successfully
|
||
* - ESP_FAIL: Manufacturer’s info read failed because some error occurred
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_read_manufac_info(phy_802_3_t *phy_802_3, uint8_t *model, uint8_t *rev);
|
||
|
||
/**
|
||
* @brief Returns address to parent IEEE 802.3 PHY object infostructure
|
||
*
|
||
* @param phy Ethernet PHY instance
|
||
* @return phy_802_3_t*
|
||
* - address to parent IEEE 802.3 PHY object infostructure
|
||
*/
|
||
inline __attribute__((always_inline)) phy_802_3_t *esp_eth_phy_into_phy_802_3(esp_eth_phy_t *phy)
|
||
{
|
||
return __containerof(phy, phy_802_3_t, parent);
|
||
}
|
||
|
||
/**
|
||
* @brief Initializes configuration of parent IEEE 802.3 PHY object infostructure
|
||
*
|
||
* @param phy_802_3 Address to IEEE 802.3 PHY object infostructure
|
||
* @param config Configuration of the IEEE 802.3 PHY object
|
||
* @return
|
||
* - ESP_OK: configuration initialized successfully
|
||
* - ESP_ERR_INVALID_ARG: invalid @c config argument
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_obj_config_init(phy_802_3_t *phy_802_3, const eth_phy_config_t *config);
|
||
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|