esp-idf/components/bt/bluedroid/device/controller.c
Tian Hao 6648ff427c component/bt : fix connection bug of Iphone7 10.0.2
This connection error caused by iPhone, it think that TX data length must large than 27 when slave support EXTEND_DATA_LENGTH. But this should be allow. Besides,  the problem cannot be found on higher version of Iphone7, apple seemed to have fixed it.
Actually maybe other BLE device have the same problem.
2017-02-16 14:15:46 +08:00

499 lines
15 KiB
C

/******************************************************************************
*
* Copyright (C) 2014 Google, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#include <stdbool.h>
#include "bt_trace.h"
#include "bdaddr.h"
#include "bt_types.h"
#include "controller.h"
#include "event_mask.h"
#include "hcimsgs.h"
#include "hci_layer.h"
#include "hci_packet_factory.h"
#include "hci_packet_parser.h"
#include "btm_ble_api.h"
#include "version.h"
#include "future.h"
const bt_event_mask_t BLE_EVENT_MASK = { "\x00\x00\x00\x00\x00\x00\x06\x7f" };
#if (BLE_INCLUDED)
const bt_event_mask_t CLASSIC_EVENT_MASK = { HCI_DUMO_EVENT_MASK_EXT };
#else
const bt_event_mask_t CLASSIC_EVENT_MASK = { HCI_LISBON_EVENT_MASK_EXT };
#endif
// TODO(zachoverflow): factor out into common module
const uint8_t SCO_HOST_BUFFER_SIZE = 0xff;
#define HCI_SUPPORTED_COMMANDS_ARRAY_SIZE 64
#define MAX_FEATURES_CLASSIC_PAGE_COUNT 3
#define BLE_SUPPORTED_STATES_SIZE 8
#define BLE_SUPPORTED_FEATURES_SIZE 8
static const hci_t *hci;
static const hci_packet_factory_t *packet_factory;
static const hci_packet_parser_t *packet_parser;
static bt_bdaddr_t address;
static bt_version_t bt_version;
static uint8_t supported_commands[HCI_SUPPORTED_COMMANDS_ARRAY_SIZE];
static bt_device_features_t features_classic[MAX_FEATURES_CLASSIC_PAGE_COUNT];
static uint8_t last_features_classic_page_index;
static uint16_t acl_data_size_classic;
static uint16_t acl_data_size_ble;
static uint16_t acl_buffer_count_classic;
static uint8_t acl_buffer_count_ble;
static uint8_t ble_white_list_size;
static uint8_t ble_resolving_list_max_size;
static uint8_t ble_supported_states[BLE_SUPPORTED_STATES_SIZE];
static bt_device_features_t features_ble;
static uint16_t ble_suggested_default_data_length;
static bool readable;
static bool ble_supported;
static bool simple_pairing_supported;
static bool secure_connections_supported;
#define AWAIT_COMMAND(command) future_await(hci->transmit_command_futured(command))
// Module lifecycle functions
static void start_up(void)
{
BT_HDR *response;
// Send the initial reset command
response = AWAIT_COMMAND(packet_factory->make_reset());
packet_parser->parse_generic_command_complete(response);
// Request the classic buffer size next
response = AWAIT_COMMAND(packet_factory->make_read_buffer_size());
packet_parser->parse_read_buffer_size_response(
response, &acl_data_size_classic, &acl_buffer_count_classic);
// Tell the controller about our buffer sizes and buffer counts next
// TODO(zachoverflow): factor this out. eww l2cap contamination. And why just a hardcoded 10?
response = AWAIT_COMMAND(
packet_factory->make_host_buffer_size(
L2CAP_MTU_SIZE,
SCO_HOST_BUFFER_SIZE,
L2CAP_HOST_FC_ACL_BUFS,
10
)
);
packet_parser->parse_generic_command_complete(response);
// Read the local version info off the controller next, including
// information such as manufacturer and supported HCI version
response = AWAIT_COMMAND(packet_factory->make_read_local_version_info());
packet_parser->parse_read_local_version_info_response(response, &bt_version);
// Read the bluetooth address off the controller next
response = AWAIT_COMMAND(packet_factory->make_read_bd_addr());
packet_parser->parse_read_bd_addr_response(response, &address);
// Request the controller's supported commands next
response = AWAIT_COMMAND(packet_factory->make_read_local_supported_commands());
packet_parser->parse_read_local_supported_commands_response(
response,
supported_commands,
HCI_SUPPORTED_COMMANDS_ARRAY_SIZE
);
// Read page 0 of the controller features next
uint8_t page_number = 0;
response = AWAIT_COMMAND(packet_factory->make_read_local_extended_features(page_number));
packet_parser->parse_read_local_extended_features_response(
response,
&page_number,
&last_features_classic_page_index,
features_classic,
MAX_FEATURES_CLASSIC_PAGE_COUNT
);
assert(page_number == 0);
page_number++;
// Inform the controller what page 0 features we support, based on what
// it told us it supports. We need to do this first before we request the
// next page, because the controller's response for page 1 may be
// dependent on what we configure from page 0
simple_pairing_supported = HCI_SIMPLE_PAIRING_SUPPORTED(features_classic[0].as_array);
if (simple_pairing_supported) {
response = AWAIT_COMMAND(packet_factory->make_write_simple_pairing_mode(HCI_SP_MODE_ENABLED));
packet_parser->parse_generic_command_complete(response);
}
#if (BLE_INCLUDED == TRUE)
if (HCI_LE_SPT_SUPPORTED(features_classic[0].as_array)) {
uint8_t simultaneous_le_host = HCI_SIMUL_LE_BREDR_SUPPORTED(features_classic[0].as_array) ? BTM_BLE_SIMULTANEOUS_HOST : 0;
response = AWAIT_COMMAND(
packet_factory->make_ble_write_host_support(BTM_BLE_HOST_SUPPORT, simultaneous_le_host)
);
packet_parser->parse_generic_command_complete(response);
}
#endif
// Done telling the controller about what page 0 features we support
// Request the remaining feature pages
while (page_number <= last_features_classic_page_index &&
page_number < MAX_FEATURES_CLASSIC_PAGE_COUNT) {
response = AWAIT_COMMAND(packet_factory->make_read_local_extended_features(page_number));
packet_parser->parse_read_local_extended_features_response(
response,
&page_number,
&last_features_classic_page_index,
features_classic,
MAX_FEATURES_CLASSIC_PAGE_COUNT
);
page_number++;
}
#if (SC_MODE_INCLUDED == TRUE)
secure_connections_supported = HCI_SC_CTRLR_SUPPORTED(features_classic[2].as_array);
if (secure_connections_supported) {
response = AWAIT_COMMAND(packet_factory->make_write_secure_connections_host_support(HCI_SC_MODE_ENABLED));
packet_parser->parse_generic_command_complete(response);
}
#endif
#if (BLE_INCLUDED == TRUE)
ble_supported = last_features_classic_page_index >= 1 && HCI_LE_HOST_SUPPORTED(features_classic[1].as_array);
if (ble_supported) {
// Request the ble white list size next
response = AWAIT_COMMAND(packet_factory->make_ble_read_white_list_size());
packet_parser->parse_ble_read_white_list_size_response(response, &ble_white_list_size);
// Request the ble buffer size next
response = AWAIT_COMMAND(packet_factory->make_ble_read_buffer_size());
packet_parser->parse_ble_read_buffer_size_response(
response,
&acl_data_size_ble,
&acl_buffer_count_ble
);
// Response of 0 indicates ble has the same buffer size as classic
if (acl_data_size_ble == 0) {
acl_data_size_ble = acl_data_size_classic;
}
// Request the ble supported states next
response = AWAIT_COMMAND(packet_factory->make_ble_read_supported_states());
packet_parser->parse_ble_read_supported_states_response(
response,
ble_supported_states,
sizeof(ble_supported_states)
);
// Request the ble supported features next
response = AWAIT_COMMAND(packet_factory->make_ble_read_local_supported_features());
packet_parser->parse_ble_read_local_supported_features_response(
response,
&features_ble
);
if (HCI_LE_ENHANCED_PRIVACY_SUPPORTED(features_ble.as_array)) {
response = AWAIT_COMMAND(packet_factory->make_ble_read_resolving_list_size());
packet_parser->parse_ble_read_resolving_list_size_response(
response,
&ble_resolving_list_max_size);
}
if (HCI_LE_DATA_LEN_EXT_SUPPORTED(features_ble.as_array)) {
/* set default tx data length to MAX 251 */
response = AWAIT_COMMAND(packet_factory->make_ble_write_suggested_default_data_length(BTM_BLE_DATA_SIZE_MAX, BTM_BLE_DATA_TX_TIME_MAX));
packet_parser->parse_generic_command_complete(response);
response = AWAIT_COMMAND(packet_factory->make_ble_read_suggested_default_data_length());
packet_parser->parse_ble_read_suggested_default_data_length_response(
response,
&ble_suggested_default_data_length);
}
// Set the ble event mask next
response = AWAIT_COMMAND(packet_factory->make_ble_set_event_mask(&BLE_EVENT_MASK));
packet_parser->parse_generic_command_complete(response);
}
#endif
if (simple_pairing_supported) {
response = AWAIT_COMMAND(packet_factory->make_set_event_mask(&CLASSIC_EVENT_MASK));
packet_parser->parse_generic_command_complete(response);
}
readable = true;
// return future_new_immediate(FUTURE_SUCCESS);
return;
}
static void shut_down(void)
{
readable = false;
}
static bool get_is_ready(void)
{
return readable;
}
static const bt_bdaddr_t *get_address(void)
{
assert(readable);
return &address;
}
static const bt_version_t *get_bt_version(void)
{
assert(readable);
return &bt_version;
}
// TODO(zachoverflow): hide inside, move decoder inside too
static const bt_device_features_t *get_features_classic(int index)
{
assert(readable);
assert(index < MAX_FEATURES_CLASSIC_PAGE_COUNT);
return &features_classic[index];
}
static uint8_t get_last_features_classic_index(void)
{
assert(readable);
return last_features_classic_page_index;
}
static const bt_device_features_t *get_features_ble(void)
{
assert(readable);
assert(ble_supported);
return &features_ble;
}
static const uint8_t *get_ble_supported_states(void)
{
assert(readable);
assert(ble_supported);
return ble_supported_states;
}
static bool supports_simple_pairing(void)
{
assert(readable);
return simple_pairing_supported;
}
static bool supports_secure_connections(void)
{
assert(readable);
return secure_connections_supported;
}
static bool supports_simultaneous_le_bredr(void)
{
assert(readable);
return HCI_SIMUL_LE_BREDR_SUPPORTED(features_classic[0].as_array);
}
static bool supports_reading_remote_extended_features(void)
{
assert(readable);
return HCI_READ_REMOTE_EXT_FEATURES_SUPPORTED(supported_commands);
}
static bool supports_interlaced_inquiry_scan(void)
{
assert(readable);
return HCI_LMP_INTERLACED_INQ_SCAN_SUPPORTED(features_classic[0].as_array);
}
static bool supports_rssi_with_inquiry_results(void)
{
assert(readable);
return HCI_LMP_INQ_RSSI_SUPPORTED(features_classic[0].as_array);
}
static bool supports_extended_inquiry_response(void)
{
assert(readable);
return HCI_EXT_INQ_RSP_SUPPORTED(features_classic[0].as_array);
}
static bool supports_master_slave_role_switch(void)
{
assert(readable);
return HCI_SWITCH_SUPPORTED(features_classic[0].as_array);
}
static bool supports_ble(void)
{
assert(readable);
return ble_supported;
}
static bool supports_ble_privacy(void)
{
assert(readable);
assert(ble_supported);
return HCI_LE_ENHANCED_PRIVACY_SUPPORTED(features_ble.as_array);
}
static bool supports_ble_packet_extension(void)
{
assert(readable);
assert(ble_supported);
return HCI_LE_DATA_LEN_EXT_SUPPORTED(features_ble.as_array);
}
static bool supports_ble_connection_parameters_request(void)
{
assert(readable);
assert(ble_supported);
return HCI_LE_CONN_PARAM_REQ_SUPPORTED(features_ble.as_array);
}
static uint16_t get_acl_data_size_classic(void)
{
assert(readable);
return acl_data_size_classic;
}
static uint16_t get_acl_data_size_ble(void)
{
assert(readable);
assert(ble_supported);
return acl_data_size_ble;
}
static uint16_t get_acl_packet_size_classic(void)
{
assert(readable);
return acl_data_size_classic + HCI_DATA_PREAMBLE_SIZE;
}
static uint16_t get_acl_packet_size_ble(void)
{
assert(readable);
return acl_data_size_ble + HCI_DATA_PREAMBLE_SIZE;
}
static uint16_t get_ble_suggested_default_data_length(void)
{
assert(readable);
assert(ble_supported);
return ble_suggested_default_data_length;
}
static uint16_t get_acl_buffer_count_classic(void)
{
assert(readable);
return acl_buffer_count_classic;
}
static uint8_t get_acl_buffer_count_ble(void)
{
assert(readable);
assert(ble_supported);
return acl_buffer_count_ble;
}
static uint8_t get_ble_white_list_size(void)
{
assert(readable);
assert(ble_supported);
return ble_white_list_size;
}
static uint8_t get_ble_resolving_list_max_size(void)
{
assert(readable);
assert(ble_supported);
return ble_resolving_list_max_size;
}
static void set_ble_resolving_list_max_size(int resolving_list_max_size)
{
assert(readable);
assert(ble_supported);
ble_resolving_list_max_size = resolving_list_max_size;
}
static const controller_t interface = {
start_up,
shut_down,
get_is_ready,
get_address,
get_bt_version,
get_features_classic,
get_last_features_classic_index,
get_features_ble,
get_ble_supported_states,
supports_simple_pairing,
supports_secure_connections,
supports_simultaneous_le_bredr,
supports_reading_remote_extended_features,
supports_interlaced_inquiry_scan,
supports_rssi_with_inquiry_results,
supports_extended_inquiry_response,
supports_master_slave_role_switch,
supports_ble,
supports_ble_packet_extension,
supports_ble_connection_parameters_request,
supports_ble_privacy,
get_acl_data_size_classic,
get_acl_data_size_ble,
get_acl_packet_size_classic,
get_acl_packet_size_ble,
get_ble_suggested_default_data_length,
get_acl_buffer_count_classic,
get_acl_buffer_count_ble,
get_ble_white_list_size,
get_ble_resolving_list_max_size,
set_ble_resolving_list_max_size
};
const controller_t *controller_get_interface()
{
static bool loaded = false;
if (!loaded) {
loaded = true;
hci = hci_layer_get_interface();
packet_factory = hci_packet_factory_get_interface();
packet_parser = hci_packet_parser_get_interface();
}
return &interface;
}