mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
d15a9c2c48
Fixed memory leak in emac_esp_new_dma function. Polished ESP EMAC cache management. Added emac_periph definitions based on SoC features and improved(generalized) ESP EMAC GPIO initialization. Added ESP EMAC GPIO reservation. Added check for frame error condition indicated by EMAC DMA and created a target test.
379 lines
14 KiB
C
379 lines
14 KiB
C
/*
|
||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||
*
|
||
* SPDX-License-Identifier: Apache-2.0
|
||
*/
|
||
#pragma once
|
||
|
||
#include <stdbool.h>
|
||
#include "esp_eth_phy.h"
|
||
#include "sdkconfig.h"
|
||
#include "eth_phy_802_3_regs.h"
|
||
|
||
#ifdef __cplusplus
|
||
extern "C" {
|
||
#endif
|
||
|
||
/**
|
||
* @brief IEEE 802.3 PHY object infostructure
|
||
*
|
||
*/
|
||
typedef struct {
|
||
esp_eth_phy_t parent; /*!< Parent Ethernet PHY instance */
|
||
esp_eth_mediator_t *eth; /*!< Mediator of Ethernet driver */
|
||
int addr; /*!< PHY address */
|
||
uint32_t reset_timeout_ms; /*!< Reset timeout value (Unit: ms) */
|
||
uint32_t autonego_timeout_ms; /*!< Auto-negotiation timeout value (Unit: ms) */
|
||
eth_link_t link_status; /*!< Current Link status */
|
||
int reset_gpio_num; /*!< Reset GPIO number, -1 means no hardware reset */
|
||
} phy_802_3_t;
|
||
|
||
/**
|
||
* @brief IEEE 802.3 MMD modes enumeration
|
||
*
|
||
*/
|
||
typedef enum {
|
||
MMD_FUNC_ADDRESS = 0,
|
||
MMD_FUNC_DATA_NOINCR = 1,
|
||
MMD_FUNC_DATA_RWINCR = 2,
|
||
MMD_FUNC_DATA_WINCR = 3
|
||
} esp_eth_phy_802_3_mmd_func_t;
|
||
|
||
/**
|
||
* @brief Set Ethernet mediator
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param eth Ethernet mediator pointer
|
||
* @return
|
||
* - ESP_OK: Ethermet mediator set successfully
|
||
* - ESP_ERR_INVALID_ARG: if @c eth is @c NULL
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_mediator(phy_802_3_t *phy_802_3, esp_eth_mediator_t *eth);
|
||
|
||
/**
|
||
* @brief Reset PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY reset successfully
|
||
* - ESP_FAIL: reset Ethernet PHY failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_reset(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Control autonegotiation mode of Ethernet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param cmd autonegotiation command enumeration
|
||
* @param[out] autonego_en_stat autonegotiation enabled flag
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY autonegotiation configured successfully
|
||
* - ESP_FAIL: Ethernet PHY autonegotiation configuration fail because some error occurred
|
||
* - ESP_ERR_INVALID_ARG: invalid value of @c cmd
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_autonego_ctrl(phy_802_3_t *phy_802_3, eth_phy_autoneg_cmd_t cmd, bool *autonego_en_stat);
|
||
|
||
/**
|
||
* @brief Power control of Ethernet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param enable set true to power ON Ethernet PHY; set false to power OFF Ethernet PHY
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY power down mode set successfully
|
||
* - ESP_FAIL: Ethernet PHY power up or power down failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_pwrctl(phy_802_3_t *phy_802_3, bool enable);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY address
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param addr new PHY address
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY address set
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_addr(phy_802_3_t *phy_802_3, uint32_t addr);
|
||
|
||
/**
|
||
* @brief Get Ethernet PHY address
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param[out] addr Ethernet PHY address
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY address read successfully
|
||
* - ESP_ERR_INVALID_ARG: @c addr pointer is @c NULL
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_get_addr(phy_802_3_t *phy_802_3, uint32_t *addr);
|
||
|
||
/**
|
||
* @brief Advertise pause function ability
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param ability enable or disable pause ability
|
||
* @return
|
||
* - ESP_OK: pause ability set successfully
|
||
* - ESP_FAIL: Advertise pause function ability failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_advertise_pause_ability(phy_802_3_t *phy_802_3, uint32_t ability);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY loopback mode
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param enable set true to enable loopback; set false to disable loopback
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY loopback mode set successfully
|
||
* - ESP_FAIL: Ethernet PHY loopback configuration failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_loopback(phy_802_3_t *phy_802_3, bool enable);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY speed
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param speed new speed of Ethernet PHY link
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY speed set successfully
|
||
* - ESP_FAIL: Set Ethernet PHY speed failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_speed(phy_802_3_t *phy_802_3, eth_speed_t speed);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY duplex mode
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param duplex new duplex mode for Ethernet PHY link
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY duplex mode set successfully
|
||
* - ESP_ERR_INVALID_STATE: unable to set duplex mode to Half if loopback is enabled
|
||
* - ESP_FAIL: Set Ethernet PHY duplex mode failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_duplex(phy_802_3_t *phy_802_3, eth_duplex_t duplex);
|
||
|
||
/**
|
||
* @brief Set Ethernet PHY link status
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param link new link status
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY link set successfully
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_link(phy_802_3_t *phy_802_3, eth_link_t link);
|
||
|
||
/**
|
||
* @brief Initialize Ethernet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY initialized successfully
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_init(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Power off Eternet PHY
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethernet PHY powered off successfully
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_deinit(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Delete Ethernet PHY infostructure
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: Ethrnet PHY infostructure deleted
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_del(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Performs hardware reset with specific reset pin assertion time
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param reset_assert_us Hardware reset pin assertion time
|
||
* @return
|
||
* - ESP_OK: reset Ethernet PHY successfully
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_reset_hw(phy_802_3_t *phy_802_3, uint32_t reset_assert_us);
|
||
|
||
/**
|
||
* @brief Detect PHY address
|
||
*
|
||
* @param eth Mediator of Ethernet driver
|
||
* @param[out] detected_addr: a valid address after detection
|
||
* @return
|
||
* - ESP_OK: detect phy address successfully
|
||
* - ESP_ERR_INVALID_ARG: invalid parameter
|
||
* - ESP_ERR_NOT_FOUND: can't detect any PHY device
|
||
* - ESP_FAIL: detect phy address failed because some error occurred
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_detect_phy_addr(esp_eth_mediator_t *eth, int *detected_addr);
|
||
|
||
/**
|
||
* @brief Performs basic PHY chip initialization
|
||
*
|
||
* @note It should be called as the first function in PHY specific driver instance
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: initialized Ethernet PHY successfully
|
||
* - ESP_FAIL: initialization of Ethernet PHY failed because some error occurred
|
||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||
* - ESP_ERR_NOT_FOUND: PHY device not detected
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_basic_phy_init(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Performs basic PHY chip de-initialization
|
||
*
|
||
* @note It should be called as the last function in PHY specific driver instance
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @return
|
||
* - ESP_OK: de-initialized Ethernet PHY successfully
|
||
* - ESP_FAIL: de-initialization of Ethernet PHY failed because some error occurred
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_basic_phy_deinit(phy_802_3_t *phy_802_3);
|
||
|
||
/**
|
||
* @brief Reads raw content of OUI field
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param[out] oui OUI value
|
||
* @return
|
||
* - ESP_OK: OUI field read successfully
|
||
* - ESP_FAIL: OUI field read failed because some error occurred
|
||
* - ESP_ERR_INVALID_ARG: invalid @c oui argument
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_read_oui(phy_802_3_t *phy_802_3, uint32_t *oui);
|
||
|
||
/**
|
||
* @brief Reads manufacturer’s model and revision number
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param[out] model Manufacturer’s model number (can be NULL when not required)
|
||
* @param[out] rev Manufacturer’s revision number (can be NULL when not required)
|
||
* @return
|
||
* - ESP_OK: Manufacturer’s info read successfully
|
||
* - ESP_FAIL: Manufacturer’s info read failed because some error occurred
|
||
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
|
||
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_read_manufac_info(phy_802_3_t *phy_802_3, uint8_t *model, uint8_t *rev);
|
||
|
||
/**
|
||
* @brief Reads MDIO device's internal address register
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param devaddr Address of MDIO device
|
||
* @param[out] mmd_addr Current address stored in device's register
|
||
* @return
|
||
* - ESP_OK: Address register read successfully
|
||
* - ESP_FAIL: Address register read failed because of some error occurred
|
||
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_get_mmd_addr(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t *mmd_addr);
|
||
|
||
/**
|
||
* @brief Write to DIO device's internal address register
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param devaddr Address of MDIO device
|
||
* @param[out] mmd_addr New value of MDIO device's address register value
|
||
* @return
|
||
* - ESP_OK: Address register written to successfully
|
||
* - ESP_FAIL: Address register write failed because of some error occurred
|
||
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_set_mmd_addr(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t mmd_addr);
|
||
|
||
/**
|
||
* @brief Read data of MDIO device's memory at address register
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param devaddr Address of MDIO device
|
||
* @param function MMD function
|
||
* @param[out] data Data read from the device's memory
|
||
* @return
|
||
* - ESP_OK: Memory read successfully
|
||
* - ESP_FAIL: Memory read failed because of some error occurred
|
||
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits) or MMD access function is invalid
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_read_mmd_data(phy_802_3_t *phy_802_3, uint8_t devaddr, esp_eth_phy_802_3_mmd_func_t function, uint32_t *data);
|
||
|
||
/**
|
||
* @brief Write data to MDIO device's memory at address register
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param devaddr Address of MDIO device
|
||
* @param function MMD function
|
||
* @param[out] data Data to write to the device's memory
|
||
* @return
|
||
* - ESP_OK: Memory written successfully
|
||
* - ESP_FAIL: Memory write failed because of some error occurred
|
||
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits) or MMD access function is invalid
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_write_mmd_data(phy_802_3_t *phy_802_3, uint8_t devaddr, esp_eth_phy_802_3_mmd_func_t function, uint32_t data);
|
||
|
||
/**
|
||
* @brief Set MMD address to mmd_addr with function MMD_FUNC_NOINCR and read contents to *data
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param devaddr Address of MDIO device
|
||
* @param mmd_addr Address of MDIO device register
|
||
* @param[out] data Data read from the device's memory
|
||
* @return
|
||
* - ESP_OK: Memory read successfully
|
||
* - ESP_FAIL: Memory read failed because of some error occurred
|
||
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_read_mmd_register(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t mmd_addr, uint32_t *data);
|
||
|
||
/**
|
||
* @brief Set MMD address to mmd_addr with function MMD_FUNC_NOINCR and write data
|
||
*
|
||
* @param phy_802_3 IEEE 802.3 PHY object infostructure
|
||
* @param devaddr Address of MDIO device
|
||
* @param mmd_addr Address of MDIO device register
|
||
* @param[out] data Data to write to the device's memory
|
||
* @return
|
||
* - ESP_OK: Memory written to successfully
|
||
* - ESP_FAIL: Memory write failed because of some error occurred
|
||
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_write_mmd_register(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t mmd_addr, uint32_t data);
|
||
|
||
/**
|
||
* @brief Returns address to parent IEEE 802.3 PHY object infostructure
|
||
*
|
||
* @param phy Ethernet PHY instance
|
||
* @return phy_802_3_t*
|
||
* - address to parent IEEE 802.3 PHY object infostructure
|
||
*/
|
||
inline __attribute__((always_inline)) phy_802_3_t *esp_eth_phy_into_phy_802_3(esp_eth_phy_t *phy)
|
||
{
|
||
return __containerof(phy, phy_802_3_t, parent);
|
||
}
|
||
|
||
/**
|
||
* @brief Initializes configuration of parent IEEE 802.3 PHY object infostructure
|
||
*
|
||
* @param phy_802_3 Address to IEEE 802.3 PHY object infostructure
|
||
* @param config Configuration of the IEEE 802.3 PHY object
|
||
* @return
|
||
* - ESP_OK: configuration initialized successfully
|
||
* - ESP_ERR_INVALID_ARG: invalid @c config argument
|
||
*/
|
||
esp_err_t esp_eth_phy_802_3_obj_config_init(phy_802_3_t *phy_802_3, const eth_phy_config_t *config);
|
||
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|