alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
c5cc4f488a
esp-idf/components/hal/esp32/include/hal/clk_tree_ll.h

907 lines
29 KiB
C
Raw Blame History

/*
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include "soc/soc.h"
#include "soc/clk_tree_defs.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/rtc_io_reg.h"
#include "soc/dport_reg.h"
#include "soc/syscon_reg.h"
#include "hal/regi2c_ctrl.h"
#include "soc/regi2c_bbpll.h"
#include "soc/regi2c_apll.h"
#include "hal/assert.h"
#include "esp32/rom/rtc.h"
#ifdef __cplusplus
extern "C" {
#endif
#define MHZ (1000000)
#define CLK_LL_PLL_80M_FREQ_MHZ (80)
#define CLK_LL_PLL_160M_FREQ_MHZ (160)
#define CLK_LL_PLL_240M_FREQ_MHZ (240)
#define CLK_LL_PLL_320M_FREQ_MHZ (320)
#define CLK_LL_PLL_480M_FREQ_MHZ (480)
#define CLK_LL_AHB_MAX_FREQ_MHZ CLK_LL_PLL_80M_FREQ_MHZ
/* BBPLL configuration parameters at reset */
#define CLK_LL_BBPLL_IR_CAL_DELAY_VAL 0x18
#define CLK_LL_BBPLL_IR_CAL_EXT_CAP_VAL 0x20
#define CLK_LL_BBPLL_OC_ENB_FCAL_VAL 0x9a
#define CLK_LL_BBPLL_OC_ENB_VCON_VAL 0x00
#define CLK_LL_BBPLL_BBADC_CAL_7_0_VAL 0x00
/* BBPLL configuration parameters */
#define CLK_LL_BBPLL_ENDIV5_VAL_320M 0x43
#define CLK_LL_BBPLL_BBADC_DSMP_VAL_320M 0x84
#define CLK_LL_BBPLL_ENDIV5_VAL_480M 0xc3
#define CLK_LL_BBPLL_BBADC_DSMP_VAL_480M 0x74
/* APLL configuration parameters */
#define CLK_LL_APLL_SDM_STOP_VAL_1 0x09
#define CLK_LL_APLL_SDM_STOP_VAL_2_REV0 0x69
#define CLK_LL_APLL_SDM_STOP_VAL_2_REV1 0x49
/* APLL calibration parameters */
#define CLK_LL_APLL_CAL_DELAY_1 0x0f
#define CLK_LL_APLL_CAL_DELAY_2 0x3f
#define CLK_LL_APLL_CAL_DELAY_3 0x1f
/* XTAL32K configuration parameters for 32kHz crystal */
#define CLK_LL_XTAL_32K_DAC_VAL 1
#define CLK_LL_XTAL_32K_DRES_VAL 3
#define CLK_LL_XTAL_32K_DBIAS_VAL 0
/* XTAL32K configuration parameters for external oscillator clock */
#define CLK_LL_XTAL_32K_EXT_DAC_VAL 2
#define CLK_LL_XTAL_32K_EXT_DRES_VAL 3
#define CLK_LL_XTAL_32K_EXT_DBIAS_VAL 1
/* XTAL32K configuration parameters for fast startup with bootstrap */
#define CLK_LL_XTAL_32K_BOOTSTRAP_DAC_VAL 3
#define CLK_LL_XTAL_32K_BOOTSTRAP_DRES_VAL 3
#define CLK_LL_XTAL_32K_BOOTSTRAP_DBIAS_VAL 0
/* APLL multiplier output frequency range */
// apll_multiplier_out = xtal_freq * (4 + sdm2 + sdm1/256 + sdm0/65536)
#define CLK_LL_APLL_MULTIPLIER_MIN_HZ (350000000) // 350 MHz
#define CLK_LL_APLL_MULTIPLIER_MAX_HZ (500000000) // 500 MHz
/* APLL output frequency range */
#define CLK_LL_APLL_MIN_HZ (5303031) // 5.303031 MHz, refer to 'periph_rtc_apll_freq_set' for the calculation
#define CLK_LL_APLL_MAX_HZ (125000000) // 125MHz, refer to 'periph_rtc_apll_freq_set' for the calculation
/**
* @brief XTAL32K_CLK enable modes
*/
typedef enum {
CLK_LL_XTAL32K_ENABLE_MODE_CRYSTAL, //!< Enable the external 32kHz crystal for XTAL32K_CLK
CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL, //!< Enable the external clock signal for XTAL32K_CLK
CLK_LL_XTAL32K_ENABLE_MODE_BOOTSTRAP, //!< Bootstrap the crystal oscillator for faster XTAL32K_CLK start up */
} clk_ll_xtal32k_enable_mode_t;
/**
* @brief Power up internal I2C bus
*/
static inline __attribute__((always_inline)) void clk_ll_i2c_pu(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BIAS_I2C_FORCE_PD);
}
/**
* @brief Power down internal I2C bus
*/
static inline __attribute__((always_inline)) void clk_ll_i2c_pd(void)
{
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BIAS_I2C_FORCE_PD);
}
/**
* @brief Power up BBPLL circuit
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_enable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG,
RTC_CNTL_BB_I2C_FORCE_PD | RTC_CNTL_BBPLL_FORCE_PD |
RTC_CNTL_BBPLL_I2C_FORCE_PD);
// Reset BBPLL configuration
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_IR_CAL_DELAY, CLK_LL_BBPLL_IR_CAL_DELAY_VAL);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_IR_CAL_EXT_CAP, CLK_LL_BBPLL_IR_CAL_EXT_CAP_VAL);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_ENB_FCAL, CLK_LL_BBPLL_OC_ENB_FCAL_VAL);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_ENB_VCON, CLK_LL_BBPLL_OC_ENB_VCON_VAL);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_BBADC_CAL_7_0, CLK_LL_BBPLL_BBADC_CAL_7_0_VAL);
}
/**
* @brief Power down BBPLL circuit
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_disable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG,
RTC_CNTL_BB_I2C_FORCE_PD | RTC_CNTL_BBPLL_FORCE_PD |
RTC_CNTL_BBPLL_I2C_FORCE_PD);
}
/**
* @brief Power up APLL circuit
*/
static inline __attribute__((always_inline)) void clk_ll_apll_enable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PD);
SET_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PU);
}
/**
* @brief Power down APLL circuit
*/
static inline __attribute__((always_inline)) void clk_ll_apll_disable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PD);
CLEAR_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PU);
}
/**
* @brief Check whether APLL is under force power down state
*
* @return True if APLL is under force power down; otherwise false
*/
static inline __attribute__((always_inline)) bool clk_ll_apll_is_fpd(void)
{
return REG_GET_FIELD(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PD);
}
/**
* @brief Get APLL configuration which can be used to calculate APLL frequency
*
* @param[out] o_div Frequency divider, 0..31
* @param[out] sdm0 Frequency adjustment parameter, 0..255
* @param[out] sdm1 Frequency adjustment parameter, 0..255
* @param[out] sdm2 Frequency adjustment parameter, 0..63
*/
static inline __attribute__((always_inline)) void clk_ll_apll_get_config(uint32_t *o_div, uint32_t *sdm0, uint32_t *sdm1, uint32_t *sdm2)
{
*o_div = REGI2C_READ_MASK(I2C_APLL, I2C_APLL_OR_OUTPUT_DIV);
*sdm0 = REGI2C_READ_MASK(I2C_APLL, I2C_APLL_DSDM0);
*sdm1 = REGI2C_READ_MASK(I2C_APLL, I2C_APLL_DSDM1);
*sdm2 = REGI2C_READ_MASK(I2C_APLL, I2C_APLL_DSDM2);
}
/**
* @brief Set APLL configuration
*
* @param is_rev0 True if chip version is rev0
* @param o_div Frequency divider, 0..31
* @param sdm0 Frequency adjustment parameter, 0..255
* @param sdm1 Frequency adjustment parameter, 0..255
* @param sdm2 Frequency adjustment parameter, 0..63
*/
static inline __attribute__((always_inline)) void clk_ll_apll_set_config(bool is_rev0, uint32_t o_div, uint32_t sdm0, uint32_t sdm1, uint32_t sdm2)
{
uint8_t sdm_stop_val_2 = CLK_LL_APLL_SDM_STOP_VAL_2_REV1;
if (is_rev0) {
sdm0 = 0;
sdm1 = 0;
sdm_stop_val_2 = CLK_LL_APLL_SDM_STOP_VAL_2_REV0;
}
REGI2C_WRITE_MASK(I2C_APLL, I2C_APLL_DSDM2, sdm2);
REGI2C_WRITE_MASK(I2C_APLL, I2C_APLL_DSDM0, sdm0);
REGI2C_WRITE_MASK(I2C_APLL, I2C_APLL_DSDM1, sdm1);
REGI2C_WRITE(I2C_APLL, I2C_APLL_SDM_STOP, CLK_LL_APLL_SDM_STOP_VAL_1);
REGI2C_WRITE(I2C_APLL, I2C_APLL_SDM_STOP, sdm_stop_val_2);
REGI2C_WRITE_MASK(I2C_APLL, I2C_APLL_OR_OUTPUT_DIV, o_div);
}
/**
* @brief Set APLL calibration parameters
*/
static inline __attribute__((always_inline)) void clk_ll_apll_set_calibration(void)
{
REGI2C_WRITE(I2C_APLL, I2C_APLL_IR_CAL_DELAY, CLK_LL_APLL_CAL_DELAY_1);
REGI2C_WRITE(I2C_APLL, I2C_APLL_IR_CAL_DELAY, CLK_LL_APLL_CAL_DELAY_2);
REGI2C_WRITE(I2C_APLL, I2C_APLL_IR_CAL_DELAY, CLK_LL_APLL_CAL_DELAY_3);
}
/**
* @brief Check whether APLL calibration is done
*
* @return True if calibration is done; otherwise false
*/
static inline __attribute__((always_inline)) bool clk_ll_apll_calibration_is_done(void)
{
return REGI2C_READ_MASK(I2C_APLL, I2C_APLL_OR_CAL_END);
}
/**
* @brief Enable the 32kHz crystal oscillator
*
* @param mode Used to determine the xtal32k configuration parameters
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_enable(clk_ll_xtal32k_enable_mode_t mode)
{
// Configure xtal32k
// Default mode as CLK_LL_XTAL32K_ENABLE_MODE_CRYSTAL
uint32_t dac = CLK_LL_XTAL_32K_DAC_VAL; // current
uint32_t dres = CLK_LL_XTAL_32K_DRES_VAL; // resistance
uint32_t dbias = CLK_LL_XTAL_32K_DBIAS_VAL; // dbias voltage
if (mode == CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL) {
dac = CLK_LL_XTAL_32K_EXT_DAC_VAL;
dres = CLK_LL_XTAL_32K_EXT_DRES_VAL;
dbias = CLK_LL_XTAL_32K_EXT_DBIAS_VAL;
} else if (mode == CLK_LL_XTAL32K_ENABLE_MODE_BOOTSTRAP) {
dac = CLK_LL_XTAL_32K_BOOTSTRAP_DAC_VAL;
dres = CLK_LL_XTAL_32K_BOOTSTRAP_DRES_VAL;
dbias = CLK_LL_XTAL_32K_BOOTSTRAP_DBIAS_VAL;
}
REG_SET_FIELD(RTC_IO_XTAL_32K_PAD_REG, RTC_IO_DAC_XTAL_32K, dac);
REG_SET_FIELD(RTC_IO_XTAL_32K_PAD_REG, RTC_IO_DRES_XTAL_32K, dres);
REG_SET_FIELD(RTC_IO_XTAL_32K_PAD_REG, RTC_IO_DBIAS_XTAL_32K, dbias);
// Enable xtal32k xpd status
SET_PERI_REG_MASK(RTC_IO_XTAL_32K_PAD_REG, RTC_IO_XPD_XTAL_32K_M);
}
/**
* @brief Disable the 32kHz crystal oscillator
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_disable(void)
{
// Disable xtal32k xpd status
CLEAR_PERI_REG_MASK(RTC_IO_XTAL_32K_PAD_REG, RTC_IO_XPD_XTAL_32K_M);
}
/**
* @brief Get the state of the 32kHz crystal clock
*
* @return True if the 32kHz XTAL is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_xtal32k_is_enabled(void)
{
return GET_PERI_REG_MASK(RTC_IO_XTAL_32K_PAD_REG, RTC_IO_XPD_XTAL_32K);
}
/**
* @brief Enable the internal oscillator output for RC_FAST_CLK
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_enable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ENB_CK8M);
REG_SET_FIELD(RTC_CNTL_TIMER1_REG, RTC_CNTL_CK8M_WAIT, RTC_CK8M_ENABLE_WAIT_DEFAULT);
}
/**
* @brief Disable the internal oscillator output for RC_FAST_CLK
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_disable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ENB_CK8M);
REG_SET_FIELD(RTC_CNTL_TIMER1_REG, RTC_CNTL_CK8M_WAIT, RTC_CNTL_CK8M_WAIT_DEFAULT);
}
/**
* @brief Get the state of the internal oscillator for RC_FAST_CLK
*
* @return True if the oscillator is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_rc_fast_is_enabled(void)
{
return GET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ENB_CK8M) == 0;
}
/**
* @brief Enable the output from the internal oscillator to be passed into a configurable divider,
* which by default divides the input clock frequency by 256. i.e. RC_FAST_D256_CLK = RC_FAST_CLK / 256
*
* Divider values other than 256 may be configured, but this facility is not currently needed,
* so is not exposed in the code.
* The output of the divider, RC_FAST_D256_CLK, is referred as 8md256 or simply d256 in reg. descriptions.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_d256_enable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ENB_CK8M_DIV);
}
/**
* @brief Disable the output from the internal oscillator to be passed into a configurable divider.
* i.e. RC_FAST_D256_CLK = RC_FAST_CLK / 256
*
* Disabling this divider could reduce power consumption.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_d256_disable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ENB_CK8M_DIV);
}
/**
* @brief Get the state of the divider which is applied to the output from the internal oscillator (RC_FAST_CLK)
*
* @return True if the divided output is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_rc_fast_d256_is_enabled(void)
{
return GET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ENB_CK8M_DIV) == 0;
}
/**
* @brief Enable the digital RC_FAST_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_digi_enable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_EN_M);
}
/**
* @brief Disable the digital RC_FAST_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_digi_disable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_EN_M);
}
/**
* @brief Get the state of the digital RC_FAST_CLK
*
* @return True if the digital RC_FAST_CLK is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_rc_fast_digi_is_enabled(void)
{
return GET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_EN_M);
}
/**
* @brief Enable the digital RC_FAST_D256_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_d256_digi_enable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_D256_EN_M);
}
/**
* @brief Disable the digital RC_FAST_D256_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_d256_digi_disable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_D256_EN_M);
}
/**
* @brief Enable the digital XTAL32K_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_digi_enable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_XTAL32K_EN_M);
}
/**
* @brief Disable the digital XTAL32K_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_digi_disable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_XTAL32K_EN_M);
}
/**
* @brief Get the state of the digital XTAL32K_CLK
*
* @return True if the digital XTAL32K_CLK is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_xtal32k_digi_is_enabled(void)
{
return REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_XTAL32K_EN);
}
/**
* @brief Get PLL_CLK frequency
*
* @return PLL clock frequency, in MHz. Returns 0 if register field value is invalid.
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_bbpll_get_freq_mhz(void)
{
// ESP32 BBPLL frequency is determined by the cpu freq sel
uint32_t cpu_freq_sel = DPORT_REG_GET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL);
switch (cpu_freq_sel) {
case 0:
case 1:
return CLK_LL_PLL_320M_FREQ_MHZ;
case 2:
return CLK_LL_PLL_480M_FREQ_MHZ;
default:
// Invalid CPUPERIOD_SEL value
return 0;
}
}
/**
* @brief Set BBPLL frequency from XTAL source (digital part)
*
* @param pll_freq_mhz PLL frequency, in MHz
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_set_freq_mhz(uint32_t pll_freq_mhz)
{
(void)pll_freq_mhz;
// No such operation on ESP32
}
/**
* @brief Set BBPLL frequency from XTAL source (Analog part)
*
* @param pll_freq_mhz PLL frequency, in MHz
* @param xtal_freq_mhz XTAL frequency, in MHz
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_set_config(uint32_t pll_freq_mhz, uint32_t xtal_freq_mhz)
{
uint8_t div_ref;
uint8_t div7_0;
uint8_t div10_8;
uint8_t lref;
uint8_t dcur;
uint8_t bw;
if (pll_freq_mhz == CLK_LL_PLL_320M_FREQ_MHZ) {
/* Configure 320M PLL */
switch (xtal_freq_mhz) {
case RTC_XTAL_FREQ_40M:
div_ref = 0;
div7_0 = 32;
div10_8 = 0;
lref = 0;
dcur = 6;
bw = 3;
break;
case RTC_XTAL_FREQ_26M:
div_ref = 12;
div7_0 = 224;
div10_8 = 4;
lref = 1;
dcur = 0;
bw = 1;
break;
case RTC_XTAL_FREQ_24M:
div_ref = 11;
div7_0 = 224;
div10_8 = 4;
lref = 1;
dcur = 0;
bw = 1;
break;
default:
div_ref = 12;
div7_0 = 224;
div10_8 = 4;
lref = 0;
dcur = 0;
bw = 0;
break;
}
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_ENDIV5, CLK_LL_BBPLL_ENDIV5_VAL_320M);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_BBADC_DSMP, CLK_LL_BBPLL_BBADC_DSMP_VAL_320M);
} else {
/* Configure 480M PLL */
switch (xtal_freq_mhz) {
case RTC_XTAL_FREQ_40M:
div_ref = 0;
div7_0 = 28;
div10_8 = 0;
lref = 0;
dcur = 6;
bw = 3;
break;
case RTC_XTAL_FREQ_26M:
div_ref = 12;
div7_0 = 144;
div10_8 = 4;
lref = 1;
dcur = 0;
bw = 1;
break;
case RTC_XTAL_FREQ_24M:
div_ref = 11;
div7_0 = 144;
div10_8 = 4;
lref = 1;
dcur = 0;
bw = 1;
break;
default:
div_ref = 12;
div7_0 = 224;
div10_8 = 4;
lref = 0;
dcur = 0;
bw = 0;
break;
}
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_ENDIV5, CLK_LL_BBPLL_ENDIV5_VAL_480M);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_BBADC_DSMP, CLK_LL_BBPLL_BBADC_DSMP_VAL_480M);
}
uint8_t i2c_bbpll_lref = (lref << 7) | (div10_8 << 4) | (div_ref);
uint8_t i2c_bbpll_div_7_0 = div7_0;
uint8_t i2c_bbpll_dcur = (bw << 6) | dcur;
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_LREF, i2c_bbpll_lref);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_DIV_7_0, i2c_bbpll_div_7_0);
REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_DCUR, i2c_bbpll_dcur);
}
/**
* @brief Select the clock source for CPU_CLK
*
* @param in_sel One of the clock sources in soc_cpu_clk_src_t
*/
static inline __attribute__((always_inline)) void clk_ll_cpu_set_src(soc_cpu_clk_src_t in_sel)
{
switch (in_sel) {
case SOC_CPU_CLK_SRC_XTAL:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, 0);
break;
case SOC_CPU_CLK_SRC_PLL:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, 1);
break;
case SOC_CPU_CLK_SRC_RC_FAST:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, 2);
break;
case SOC_CPU_CLK_SRC_APLL:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, 3);
break;
default:
// Unsupported CPU_CLK mux input sel
abort();
}
}
/**
* @brief Get the clock source for CPU_CLK
*
* @return Currently selected clock source (one of soc_cpu_clk_src_t values)
*/
static inline __attribute__((always_inline)) soc_cpu_clk_src_t clk_ll_cpu_get_src(void)
{
uint32_t clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL);
switch (clk_sel) {
case 0:
return SOC_CPU_CLK_SRC_XTAL;
case 1:
return SOC_CPU_CLK_SRC_PLL;
case 2:
return SOC_CPU_CLK_SRC_RC_FAST;
case 3:
return SOC_CPU_CLK_SRC_APLL;
default:
return SOC_CPU_CLK_SRC_INVALID;
}
}
/**
* @brief Set CPU frequency from PLL clock
*
* @param cpu_mhz CPU frequency value, in MHz
*/
static inline __attribute__((always_inline)) void clk_ll_cpu_set_freq_mhz_from_pll(uint32_t cpu_mhz)
{
switch (cpu_mhz) {
case CLK_LL_PLL_80M_FREQ_MHZ:
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 0);
break;
case CLK_LL_PLL_160M_FREQ_MHZ:
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 1);
break;
case CLK_LL_PLL_240M_FREQ_MHZ:
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 2);
break;
default:
// Unsupported CPU_CLK freq from PLL
abort();
}
}
/**
* @brief Get CPU_CLK frequency from PLL_CLK source
*
* @return CPU clock frequency, in MHz. Returns 0 if register field value is invalid.
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_cpu_get_freq_mhz_from_pll(void)
{
uint32_t cpu_freq_sel = DPORT_REG_GET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL);
switch (cpu_freq_sel) {
case 0:
return CLK_LL_PLL_80M_FREQ_MHZ;
case 1:
return CLK_LL_PLL_160M_FREQ_MHZ;
case 2:
return CLK_LL_PLL_240M_FREQ_MHZ;
default:
// Invalid CPUPERIOD_SEL value
return 0;
}
}
/**
* @brief Set CPU_CLK's XTAL/FAST_RC clock source path divider
*
* @param divider Divider. Usually this divider is set to 1 in bootloader stage. PRE_DIV_CNT = divider - 1.
*/
static inline __attribute__((always_inline)) void clk_ll_cpu_set_divider(uint32_t divider)
{
HAL_ASSERT(divider > 0);
REG_SET_FIELD(SYSCON_SYSCLK_CONF_REG, SYSCON_PRE_DIV_CNT, divider - 1);
}
/**
* @brief Get CPU_CLK's XTAL/FAST_RC clock source path divider
*
* @return Divider. Divider = (PRE_DIV_CNT + 1).
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_cpu_get_divider(void)
{
return REG_GET_FIELD(SYSCON_SYSCLK_CONF_REG, SYSCON_PRE_DIV_CNT) + 1;
}
/**
* @brief Get CPU_CLK's APLL clock source path divider
*
* @return Divider. Returns 0 means invalid.
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_cpu_get_divider_from_apll(void)
{
// APLL path divider choice shares the same register with CPUPERIOD_SEL
uint32_t cpu_freq_sel = DPORT_REG_GET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL);
switch (cpu_freq_sel) {
case 0:
return 4;
case 1:
return 2;
default:
// Invalid CPUPERIOD_SEL value if APLL is the clock source
return 0;
}
}
/**
* @brief Set REF_TICK divider to make REF_TICK frequency at 1MHz
*
* @param cpu_clk_src Selected CPU clock source (one of soc_cpu_clk_src_t values)
* @param cpu_freq_mhz CPU frequency value, in MHz
*
* Divider = APB_CLK freq in Hz / 1MHz. Value in register = divider - 1.
*/
static inline __attribute__((always_inline)) void clk_ll_ref_tick_set_divider(soc_cpu_clk_src_t cpu_clk_src, uint32_t cpu_freq_mhz)
{
uint32_t apb_freq_mhz;
switch (cpu_clk_src) {
case SOC_CPU_CLK_SRC_XTAL:
apb_freq_mhz = cpu_freq_mhz;
REG_WRITE(SYSCON_XTAL_TICK_CONF_REG, apb_freq_mhz - 1);
break;
case SOC_CPU_CLK_SRC_PLL:
apb_freq_mhz = 80;
REG_WRITE(SYSCON_PLL_TICK_CONF_REG, apb_freq_mhz - 1);
break;
case SOC_CPU_CLK_SRC_RC_FAST:
apb_freq_mhz = cpu_freq_mhz;
REG_WRITE(SYSCON_CK8M_TICK_CONF_REG, apb_freq_mhz - 1);
break;
case SOC_CPU_CLK_SRC_APLL:
apb_freq_mhz = cpu_freq_mhz >> 1;
REG_WRITE(SYSCON_APLL_TICK_CONF_REG, apb_freq_mhz - 1);
break;
default:
// Unsupported CPU_CLK mux input sel
abort();
}
}
/**
* @brief Select the clock source for RTC_SLOW_CLK
*
* @param in_sel One of the clock sources in soc_rtc_slow_clk_src_t
*/
static inline __attribute__((always_inline)) void clk_ll_rtc_slow_set_src(soc_rtc_slow_clk_src_t in_sel)
{
switch (in_sel) {
case SOC_RTC_SLOW_CLK_SRC_RC_SLOW:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL, 0);
break;
case SOC_RTC_SLOW_CLK_SRC_XTAL32K:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL, 1);
break;
case SOC_RTC_SLOW_CLK_SRC_RC_FAST_D256:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL, 2);
break;
default:
// Unsupported RTC_SLOW_CLK mux input sel
abort();
}
}
/**
* @brief Get the clock source for RTC_SLOW_CLK
*
* @return Currently selected clock source (one of soc_rtc_slow_clk_src_t values)
*/
static inline __attribute__((always_inline)) soc_rtc_slow_clk_src_t clk_ll_rtc_slow_get_src(void)
{
uint32_t clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL);
switch (clk_sel) {
case 0:
return SOC_RTC_SLOW_CLK_SRC_RC_SLOW;
case 1:
return SOC_RTC_SLOW_CLK_SRC_XTAL32K;
case 2:
return SOC_RTC_SLOW_CLK_SRC_RC_FAST_D256;
default:
// Invalid ANA_CLK_RTC_SEL value
return SOC_RTC_SLOW_CLK_SRC_INVALID;
}
}
/**
* @brief Select the clock source for RTC_FAST_CLK
*
* @param in_sel One of the clock sources in soc_rtc_fast_clk_src_t
*/
static inline __attribute__((always_inline)) void clk_ll_rtc_fast_set_src(soc_rtc_fast_clk_src_t in_sel)
{
switch (in_sel) {
case SOC_RTC_FAST_CLK_SRC_XTAL_D4:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_FAST_CLK_RTC_SEL, 0);
break;
case SOC_RTC_FAST_CLK_SRC_RC_FAST:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_FAST_CLK_RTC_SEL, 1);
break;
default:
// Unsupported RTC_FAST_CLK mux input sel
abort();
}
}
/**
* @brief Get the clock source for RTC_FAST_CLK
*
* @return Currently selected clock source (one of soc_rtc_fast_clk_src_t values)
*/
static inline __attribute__((always_inline)) soc_rtc_fast_clk_src_t clk_ll_rtc_fast_get_src(void)
{
uint32_t clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_FAST_CLK_RTC_SEL);
switch (clk_sel) {
case 0:
return SOC_RTC_FAST_CLK_SRC_XTAL_D4;
case 1:
return SOC_RTC_FAST_CLK_SRC_RC_FAST;
default:
return SOC_RTC_FAST_CLK_SRC_INVALID;
}
}
/**
* @brief Set RC_FAST_CLK divider. The output from the divider is passed into rtc_fast_clk MUX.
*
* @param divider Divider of RC_FAST_CLK. Usually this divider is set to 1 (reg. value is 0) in bootloader stage.
*/
static inline void clk_ll_rc_fast_set_divider(uint32_t divider)
{
HAL_ASSERT(divider > 0);
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_DIV_SEL, divider - 1);
}
/**
* @brief Get RC_FAST_CLK divider
*
* @return Divider. Divider = (CK8M_DIV_SEL + 1).
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_rc_fast_get_divider(void)
{
return REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_DIV_SEL) + 1;
}
/************************* RTC STORAGE REGISTER STORE/LOAD **************************/
/**
* @brief Store XTAL_CLK frequency in RTC storage register
*
* Value of RTC_XTAL_FREQ_REG is stored as two copies in lower and upper 16-bit
* halves. These are the routines to work with that representation.
*
* @param xtal_freq_mhz XTAL frequency, in MHz. The frequency must necessarily be even,
* otherwise there will be a conflict with the low bit, which is used to disable logs
* in the ROM code.
*/
static inline __attribute__((always_inline)) void clk_ll_xtal_store_freq_mhz(uint32_t xtal_freq_mhz)
{
// Read the status of whether disabling logging from ROM code
uint32_t reg = READ_PERI_REG(RTC_XTAL_FREQ_REG) & RTC_DISABLE_ROM_LOG;
// If so, need to write back this setting
if (reg == RTC_DISABLE_ROM_LOG) {
xtal_freq_mhz |= 1;
}
WRITE_PERI_REG(RTC_XTAL_FREQ_REG, (xtal_freq_mhz & UINT16_MAX) | ((xtal_freq_mhz & UINT16_MAX) << 16));
}
/**
* @brief Load XTAL_CLK frequency from RTC storage register
*
* Value of RTC_XTAL_FREQ_REG is stored as two copies in lower and upper 16-bit
* halves. These are the routines to work with that representation.
*
* @return XTAL frequency, in MHz. Returns 0 if format in reg is invalid.
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_xtal_load_freq_mhz(void)
{
// Read from RTC storage register
uint32_t xtal_freq_reg = READ_PERI_REG(RTC_XTAL_FREQ_REG);
if ((xtal_freq_reg & 0xFFFF) == ((xtal_freq_reg >> 16) & 0xFFFF) &&
xtal_freq_reg != 0 && xtal_freq_reg != UINT32_MAX) {
return xtal_freq_reg & ~RTC_DISABLE_ROM_LOG & UINT16_MAX;
}
// If the format in reg is invalid or haven't written XTAL value into RTC_XTAL_FREQ_REG
return 0;
}
/**
* @brief Store APB_CLK frequency in RTC storage register
*
* Value of RTC_APB_FREQ_REG is stored as two copies in lower and upper 16-bit
* halves. These are the routines to work with that representation.
*
* @param apb_freq_hz APB frequency, in Hz
*/
static inline __attribute__((always_inline)) void clk_ll_apb_store_freq_hz(uint32_t apb_freq_hz)
{
uint32_t val = apb_freq_hz >> 12;
WRITE_PERI_REG(RTC_APB_FREQ_REG, (val & UINT16_MAX) | ((val & UINT16_MAX) << 16));
}
/**
* @brief Load APB_CLK frequency from RTC storage register
*
* Value of RTC_APB_FREQ_REG is stored as two copies in lower and upper 16-bit
* halves. These are the routines to work with that representation.
*
* @return The stored APB frequency, in Hz
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_apb_load_freq_hz(void)
{
// Read from RTC storage register
uint32_t apb_freq_hz = (READ_PERI_REG(RTC_APB_FREQ_REG) & UINT16_MAX) << 12;
// Round to the nearest MHz
apb_freq_hz += MHZ / 2;
uint32_t remainder = apb_freq_hz % MHZ;
return apb_freq_hz - remainder;
}
/**
* @brief Store RTC_SLOW_CLK calibration value in RTC storage register
*
* Value of RTC_SLOW_CLK_CAL_REG has to be in the same format as returned by rtc_clk_cal (microseconds,
* in Q13.19 fixed-point format).
*
* @param cal_value The calibration value of slow clock period in microseconds, in Q13.19 fixed point format
*/
static inline __attribute__((always_inline)) void clk_ll_rtc_slow_store_cal(uint32_t cal_value)
{
REG_WRITE(RTC_SLOW_CLK_CAL_REG, cal_value);
}
/**
* @brief Load the calibration value of RTC_SLOW_CLK frequency from RTC storage register
*
* This value gets updated (i.e. rtc slow clock gets calibrated) every time RTC_SLOW_CLK source switches
*
* @return The calibration value of slow clock period in microseconds, in Q13.19 fixed point format
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_rtc_slow_load_cal(void)
{
return REG_READ(RTC_SLOW_CLK_CAL_REG);
}
#ifdef __cplusplus
}
#endif
Reference in New Issue View Git Blame Copy Permalink