mirror of
https://github.com/espressif/esp-idf.git
synced 2024-09-20 00:36:01 -04:00
1fa59c442b
LP core was unable to boot when system was in deepsleep. This was due to lp uart init in LP rom using XTAL as clk source, which is normally powered down during sleep. This would cause lp uart to get stuck while printing ROM output, and the app would never boot. Also fixed wrong wakeup cause used by HP core for ULP wake up
370 lines
9.9 KiB
YAML
370 lines
9.9 KiB
YAML
# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
|
|
|
|
examples/system/app_trace_basic:
|
|
disable:
|
|
- if: IDF_TARGET in ["esp32c6", "esp32h2", "esp32p4"]
|
|
temporary: true
|
|
reason: target esp32c6, esp32h2, esp32p4 is not supported yet
|
|
|
|
examples/system/base_mac_address:
|
|
depends_components:
|
|
- esp_hw_support
|
|
|
|
examples/system/console/advanced:
|
|
disable_test:
|
|
- if: IDF_TARGET not in ["esp32", "esp32c3"]
|
|
reason: Sufficient to run this app on one chip with each architecture
|
|
depends_components:
|
|
- console
|
|
- vfs
|
|
|
|
examples/system/console/advanced_usb_cdc:
|
|
disable:
|
|
- if: SOC_USB_OTG_SUPPORTED != 1 or IDF_TARGET == "esp32p4" # TODO: IDF-8078, IDF-9120 and IDF-9133
|
|
depends_components:
|
|
- console
|
|
- vfs
|
|
|
|
examples/system/console/basic:
|
|
disable_test:
|
|
- if: IDF_TARGET not in ["esp32", "esp32c3"]
|
|
reason: Sufficient to run this app on one chip with each architecture
|
|
depends_components:
|
|
- console
|
|
- vfs
|
|
|
|
examples/system/deep_sleep:
|
|
disable:
|
|
- if: SOC_DEEP_SLEEP_SUPPORTED != 1
|
|
|
|
examples/system/deep_sleep_wake_stub:
|
|
disable:
|
|
- if: IDF_TARGET in ["esp32c2", "esp32p4", "esp32c5"]
|
|
temporary: true
|
|
reason: target(s) is not supported yet # TODO: [ESP32C5] IDF-8638
|
|
|
|
examples/system/efuse:
|
|
disable:
|
|
- if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- efuse
|
|
- bootloader_support
|
|
|
|
examples/system/esp_timer:
|
|
disable:
|
|
- if: SOC_LIGHT_SLEEP_SUPPORTED != 1
|
|
depends_components:
|
|
- esp_timer
|
|
|
|
examples/system/eventfd:
|
|
disable:
|
|
- if: SOC_GPTIMER_SUPPORTED != 1 and (IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux"))
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- vfs
|
|
- esp_driver_gptimer
|
|
|
|
examples/system/flash_suspend:
|
|
enable:
|
|
- if: IDF_TARGET == "esp32c3"
|
|
temporary: true
|
|
reason: the other targets are not tested yet
|
|
|
|
examples/system/freertos:
|
|
disable:
|
|
- if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- freertos
|
|
|
|
examples/system/gcov:
|
|
disable:
|
|
- if: IDF_TARGET == "esp32c5"
|
|
temporary: true
|
|
reason: not supported yet #TODO: IDF-8717
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/system/gdbstub:
|
|
disable:
|
|
- if: IDF_TARGET == "esp32p4"
|
|
temporary: true
|
|
reason: not supported yet #TODO: IDF-7510
|
|
|
|
examples/system/heap_task_tracking:
|
|
disable:
|
|
- if: IDF_TARGET != "esp32c3" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- heap
|
|
|
|
examples/system/himem:
|
|
enable:
|
|
- if: IDF_TARGET == "esp32"
|
|
reason: Feature is only needed/supported on ESP32
|
|
|
|
examples/system/ipc/ipc_isr/riscv:
|
|
enable:
|
|
- if: IDF_TARGET_ARCH_RISCV == 1 and ESP_IPC_ISR_ENABLE == 1
|
|
reason: The test is intended only for multi-core chips
|
|
disable_test:
|
|
- if: IDF_TARGET == "esp32p4"
|
|
temporary: true
|
|
reason: lack of runners
|
|
depends_components:
|
|
- esp_system
|
|
|
|
examples/system/ipc/ipc_isr/xtensa:
|
|
enable:
|
|
- if: IDF_TARGET_ARCH_XTENSA == 1 and ESP_IPC_ISR_ENABLE == 1
|
|
reason: The test is intended only for multi-core chips
|
|
depends_components:
|
|
- esp_system
|
|
|
|
examples/system/light_sleep:
|
|
disable:
|
|
- if: SOC_LIGHT_SLEEP_SUPPORTED != 1
|
|
|
|
examples/system/ota/advanced_https_ota:
|
|
disable:
|
|
- if: IDF_TARGET in ["esp32h2", "esp32p4", "esp32c5"]
|
|
temporary: true
|
|
reason: target esp32h2, esp32c5 is not supported yet, esp32p4 is not supported with bluedroid/nimble case
|
|
disable_test:
|
|
- if: IDF_TARGET not in ["esp32", "esp32c3", "esp32s3"]
|
|
temporary: true
|
|
reason: lack of runners
|
|
depends_components:
|
|
- app_update
|
|
- esp_https_ota
|
|
- esp_http_client
|
|
# different configs need different components
|
|
- esp_eth
|
|
- esp_wifi
|
|
- esp_phy
|
|
- bt
|
|
depends_filepatterns:
|
|
- examples/common_components/protocol_examples_common/**/*
|
|
|
|
examples/system/ota/native_ota_example:
|
|
disable:
|
|
- if: IDF_TARGET in ["esp32h2", "esp32c5"]
|
|
temporary: true
|
|
reason: target esp32h2, esp32c5 is not supported yet
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
reason: Only esp32 has ethernet runners
|
|
depends_components:
|
|
- app_update
|
|
- esp_https_ota
|
|
- esp_http_client
|
|
- esp_eth
|
|
- esp_driver_gpio
|
|
- bootloader_support
|
|
depends_filepatterns:
|
|
- examples/common_components/protocol_examples_common/**/*
|
|
|
|
examples/system/ota/otatool:
|
|
disable:
|
|
- if: IDF_TARGET in ["esp32h2"]
|
|
temporary: true
|
|
reason: target esp32h2 is not supported yet
|
|
|
|
examples/system/ota/pre_encrypted_ota:
|
|
disable:
|
|
- if: IDF_TARGET in ["esp32h2", "esp32c5"]
|
|
temporary: true
|
|
reason: target esp32h2, esp32c5 is not supported yet
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: Only esp32 has ethernet runners
|
|
depends_components:
|
|
- app_update
|
|
- esp_https_ota
|
|
- esp_http_client
|
|
- esp_eth
|
|
- mbedtls
|
|
- bootloader_support
|
|
depends_filepatterns:
|
|
- examples/common_components/protocol_examples_common/**/*
|
|
|
|
examples/system/ota/simple_ota_example:
|
|
disable:
|
|
- if: IDF_TARGET in ["esp32h2", "esp32p4", "esp32c5"]
|
|
temporary: true
|
|
reason: target esp32h2, esp32p4, esp32c5 is not supported yet
|
|
- if: CONFIG_NAME == "spiram" and SOC_SPIRAM_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET not in ["esp32", "esp32c3", "esp32s3"]
|
|
temporary: true
|
|
reason: lack of runners
|
|
depends_components:
|
|
- app_update
|
|
- esp_https_ota
|
|
- esp_http_client
|
|
# different configs need different components
|
|
- esp_eth
|
|
- esp_wifi
|
|
- esp_phy
|
|
- mbedtls
|
|
|
|
examples/system/perfmon:
|
|
enable:
|
|
- if: IDF_TARGET in ["esp32", "esp32s2", "esp32s3"] and NIGHTLY_RUN == "1"
|
|
reason: xtensa only feature
|
|
- if: IDF_TARGET == "esp32"
|
|
reason: testing on a single target is sufficient
|
|
depends_components:
|
|
- perfmon
|
|
|
|
examples/system/pthread:
|
|
disable:
|
|
- if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- pthread
|
|
|
|
examples/system/select:
|
|
disable:
|
|
- if: IDF_TARGET != "esp32c3" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- vfs
|
|
|
|
examples/system/sysview_tracing:
|
|
disable:
|
|
- if: SOC_GPTIMER_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/system/sysview_tracing_heap_log:
|
|
disable:
|
|
- if: SOC_GPTIMER_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/system/task_watchdog:
|
|
disable:
|
|
- if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- esp_system
|
|
|
|
examples/system/ulp/lp_core/gpio:
|
|
enable:
|
|
- if: SOC_LP_CORE_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/lp_core/lp_i2c:
|
|
enable:
|
|
- if: SOC_LP_I2C_SUPPORTED == 1
|
|
disable:
|
|
- if: IDF_TARGET == "esp32p4"
|
|
temporary: true
|
|
reason: target esp32p4 is not supported yet, TODO IDF-9407
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/lp_core/lp_uart/lp_uart_echo:
|
|
disable:
|
|
- if: SOC_ULP_LP_UART_SUPPORTED != 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/lp_core/lp_uart/lp_uart_print:
|
|
disable:
|
|
- if: SOC_ULP_LP_UART_SUPPORTED != 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_fsm/ulp:
|
|
disable:
|
|
- if: SOC_ULP_FSM_SUPPORTED != 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_fsm/ulp_adc:
|
|
enable:
|
|
- if: IDF_TARGET in ["esp32", "esp32s3"]
|
|
temporary: true
|
|
reason: the other targets are not tested yet
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/adc:
|
|
enable:
|
|
- if: SOC_RISCV_COPROC_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/ds18b20_onewire:
|
|
enable:
|
|
- if: IDF_TARGET == "esp32s2"
|
|
temporary: true
|
|
reason: the other targets are not tested yet
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/gpio:
|
|
enable:
|
|
- if: SOC_RISCV_COPROC_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/gpio_interrupt:
|
|
enable:
|
|
- if: SOC_RISCV_COPROC_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/i2c:
|
|
enable:
|
|
- if: SOC_RISCV_COPROC_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/interrupts:
|
|
enable:
|
|
- if: SOC_RISCV_COPROC_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/touch:
|
|
enable:
|
|
- if: SOC_RISCV_COPROC_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/ulp/ulp_riscv/uart_print:
|
|
enable:
|
|
- if: SOC_RISCV_COPROC_SUPPORTED == 1
|
|
depends_components:
|
|
- ulp
|
|
|
|
examples/system/unit_test/:
|
|
disable:
|
|
- if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
|
|
reason: no target specific functionality, testing on a single target is sufficient
|
|
depends_components:
|
|
- unity
|
|
|
|
examples/system/xip_from_psram:
|
|
enable:
|
|
- if: SOC_SPIRAM_SUPPORTED == 1
|
|
reason: this feature is supported on chips that have PSRAM
|
|
disable:
|
|
- if: IDF_TARGET == "esp32"
|
|
reason: target esp32 doesn't support this feature.
|
|
- if: IDF_TARGET == "esp32p4"
|
|
temporary: true
|
|
reason: not supported on p4 #TODO: IDF-7556
|