esp-idf/components/esp_driver_isp/include/driver/isp_hist.h

187 lines
7.8 KiB
C

/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "driver/isp_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/*
* ISP Histogram Struct
* |<----------------------------- INTERVAL_NUMS = 16 ------------------------------>|
* | | | | |
* | Segment 0 | Segment 1 | ............ | Segment 15 |
* 0 threshold 0 threshold 1 ... threshold 14 255
* |<------------------------------------------------------------------------------->|
*/
/**
* @brief Hist controller config
*/
typedef struct {
isp_window_t window; /*!< The sampling window of histogram, see `isp_window_t`*/
isp_hist_sampling_mode_t hist_mode; /*!< ISP histogram sampling mode */
isp_hist_rgb_coefficient_t rgb_coefficient; /*!< RGB coefficients, adjust the sensitivity to red, geen, and blue colors in the image,
only effect when hist_mode is ISP_HIST_SAMPLING_RGB, the sum of all coefficients decimal should be 256**/
isp_hist_weight_t window_weight[ISP_HIST_BLOCK_X_NUM * ISP_HIST_BLOCK_Y_NUM]; /*!< Weights of histogram's each subwindows, the sum of all subwindows's weight decimal should be 256*/
uint32_t segment_threshold[ISP_HIST_INTERVAL_NUMS]; /*!< Threshold to segment the histogram into intervals, range 0~255 */
} esp_isp_hist_config_t;
/**
* @brief New an ISP hist controller
*
* @param[in] isp_proc ISP Processor handle
* @param[in] hist_cfg Pointer to hist config. Refer to ``esp_isp_hist_config_t``.
* @param[out] ret_hdl hist controller handle
*
* @return
* - ESP_OK On success
* - ESP_ERR_INVALID_ARG If the combination of arguments is invalid
* - ESP_ERR_INVALID_STATE Invalid state
* - ESP_ERR_NOT_FOUND No free interrupt found with the specified flags
* - ESP_ERR_NO_MEM If out of memory
*/
esp_err_t esp_isp_new_hist_controller(isp_proc_handle_t isp_proc, const esp_isp_hist_config_t *hist_cfg, isp_hist_ctlr_t *ret_hdl);
/**
* @brief Delete an ISP hist controller
*
* @param[in] hist_ctlr hist controller handle
*
* @return
* - ESP_OK On success
* - ESP_ERR_INVALID_ARG If the combination of arguments is invalid.
* - ESP_ERR_INVALID_STATE Driver state is invalid.
*/
esp_err_t esp_isp_del_hist_controller(isp_hist_ctlr_t hist_ctlr);
/**
* @brief Enable an ISP hist controller
*
* @param[in] hist_ctlr hist controller handle
*
* @return
* - ESP_OK On success
* - ESP_ERR_INVALID_ARG If the combination of arguments is invalid.
* - ESP_ERR_INVALID_STATE Driver state is invalid.
*/
esp_err_t esp_isp_hist_controller_enable(isp_hist_ctlr_t hist_ctlr);
/**
* @brief Disable an ISP hist controller
*
* @param[in] hist_ctlr hist controller handle
*
* @return
* - ESP_OK On success
* - ESP_ERR_INVALID_ARG If the combination of arguments is invalid.
* - ESP_ERR_INVALID_STATE Driver state is invalid.
*/
esp_err_t esp_isp_hist_controller_disable(isp_hist_ctlr_t hist_ctlr);
/**
* @brief Trigger hist reference statistics for one time and get the result
*
* @param[in] hist_ctlr hist controller handle
* @param[in] timeout_ms Timeout in millisecond
* - timeout_ms < 0: Won't return until finished
* - timeout_ms = 0: No timeout, trigger one time statistics and return immediately,
* in this case, the result won't be assigned in this function,
* but you can get the result in the callback `esp_isp_hist_cbs_t::on_statistics_done`
* - timeout_ms > 0: Wait for specified milliseconds, if not finished, then return timeout error
* @param[out] out_res hist reference statistics result
*
* @return
* - ESP_OK On success
* - ESP_ERR_TIMEOUT Wait for the result timeout
* - ESP_ERR_INVALID_ARG If the combination of arguments is invalid.
* - ESP_ERR_INVALID_STATE Driver state is invalid.
*/
esp_err_t esp_isp_hist_controller_get_oneshot_statistics(isp_hist_ctlr_t hist_ctlr, int timeout_ms, isp_hist_result_t *out_res);
/**
* @brief Start hist continuous statistics of the reference in the window
* @note This function is an asynchronous and non-block function,
* it will start the continuous statistics and return immediately.
* You have to register the hist callback and get the result from the callback event data.
*
* @param[in] hist_ctlr hist controller handle
* @return
* - ESP_OK On success
* - ESP_ERR_INVALID_ARG Null pointer
* - ESP_ERR_INVALID_STATE Driver state is invalid.
*/
esp_err_t esp_isp_hist_controller_start_continuous_statistics(isp_hist_ctlr_t hist_ctlr);
/**
* @brief Stop hist continuous statistics of the reference in the window
*
* @param[in] hist_ctlr hist controller handle
* @return
* - ESP_OK On success
* - ESP_ERR_INVALID_ARG Null pointer
* - ESP_ERR_INVALID_STATE Driver state is invalid.
*/
esp_err_t esp_isp_hist_controller_stop_continuous_statistics(isp_hist_ctlr_t hist_ctlr);
/**
* @brief Event data of callbacks
*/
typedef struct {
isp_hist_result_t hist_result; /*!< The histogram reference statistics result */
} esp_isp_hist_evt_data_t;
/**
* @brief Prototype of ISP hist event callback
*
* @param[in] handle ISP hist controller handle
* @param[in] edata ISP hist event data
* @param[in] user_data User registered context, registered when in `esp_isp_hist_register_event_callbacks()`
*
* @return Whether a high priority task is woken up by this function
*/
typedef bool (*esp_isp_hist_callback_t)(isp_hist_ctlr_t hist_ctlr, const esp_isp_hist_evt_data_t *edata, void *user_data);
/**
* @brief Group of ISP hist callbacks
*
* @note These callbacks are all running in an ISR environment.
* @note When CONFIG_ISP_ISR_IRAM_SAFE is enabled, the callback itself and functions called by it should be placed in IRAM.
* Involved variables should be in internal RAM as well.
*/
typedef struct {
esp_isp_hist_callback_t on_statistics_done; ///< Event callback, invoked when histogram statistic done.
} esp_isp_hist_cbs_t;
/**
* @brief Register hist event callbacks
*
* @note User can deregister a previously registered callback by calling this function and setting the to-be-deregistered callback member in
* the `cbs` structure to NULL.
* @note When CONFIG_ISP_ISR_IRAM_SAFE is enabled, the callback itself and functions called by it should be placed in IRAM.
* Involved variables (including `user_data`) should be in internal RAM as well.
*
* @param[in] hist_ctlr hist controller handle
* @param[in] cbs Group of callback functions
* @param[in] user_data User data, which will be delivered to the callback functions directly
*
* @return
* - ESP_OK: On success
* - ESP_ERR_INVALID_ARG: Invalid arguments
* - ESP_ERR_INVALID_STATE: Driver state is invalid, you shouldn't call this API at this moment
*/
esp_err_t esp_isp_hist_register_event_callbacks(isp_hist_ctlr_t hist_ctlr, const esp_isp_hist_cbs_t *cbs, void *user_data);
#ifdef __cplusplus
}
#endif