esp-idf/components/partition_table/Kconfig.projbuild
Aditya Patwardhan a02be97fda nvs_flash: Modify the default NVS initialization API with internal nvs encryption
handling (only when nvs encryption is enabled)
    * NVS Encryption will now be turned on by default with flash encryption
    * Updated the flash encryption example to shocase NVS encryption
    along with information on how to configure and use NVS encryption
    * Updated respective test case
    * Added two partition tables for NVS encryption
     i) Table 1- Single factory app, no OTA, encrypted NVS
     ii) Table 2- Factory app, Two OTA, encrypted NVS
2021-01-20 11:12:14 +00:00

70 lines
3.3 KiB
Plaintext

menu "Partition Table"
choice PARTITION_TABLE_TYPE
prompt "Partition Table"
default PARTITION_TABLE_SINGLE_APP
help
The partition table to flash to the ESP32. The partition table
determines where apps, data and other resources are expected to
be found.
The predefined partition table CSV descriptions can be found
in the components/partition_table directory. Otherwise it's
possible to create a new custom partition CSV for your application.
config PARTITION_TABLE_SINGLE_APP
bool "Single factory app, no OTA"
config PARTITION_TABLE_TWO_OTA
bool "Factory app, two OTA definitions"
config PARTITION_TABLE_CUSTOM
bool "Custom partition table CSV"
config PARTITION_TABLE_SINGLE_APP_ENCRYPTED_NVS
bool "Single factory app, no OTA, encrypted NVS"
depends on !ESP32_COREDUMP_ENABLE_TO_FLASH && NVS_ENCRYPTION
config PARTITION_TABLE_TWO_OTA_ENCRYPTED_NVS
bool "Factory app, two OTA definitions, encrypted NVS"
depends on !ESP_COREDUMP_ENABLE_TO_FLASH && NVS_ENCRYPTION
endchoice
config PARTITION_TABLE_CUSTOM_FILENAME
string "Custom partition CSV file" if PARTITION_TABLE_CUSTOM
default "partitions.csv"
help
Name of the custom partition CSV filename. This path is evaluated
relative to the project root directory.
config PARTITION_TABLE_FILENAME
string
default "partitions_singleapp.csv" if PARTITION_TABLE_SINGLE_APP && !ESP_COREDUMP_ENABLE_TO_FLASH
default "partitions_singleapp_coredump.csv" if PARTITION_TABLE_SINGLE_APP && ESP_COREDUMP_ENABLE_TO_FLASH
default "partitions_singleapp_encr_nvs.csv" if PARTITION_TABLE_SINGLE_APP_ENCRYPTED_NVS
default "partitions_two_ota.csv" if PARTITION_TABLE_TWO_OTA && !ESP_COREDUMP_ENABLE_TO_FLASH
default "partitions_two_ota_coredump.csv" if PARTITION_TABLE_TWO_OTA && ESP_COREDUMP_ENABLE_TO_FLASH
default "partitions_two_ota_encr_nvs.csv" if PARTITION_TABLE_TWO_OTA_ENCRYPTED_NVS
default PARTITION_TABLE_CUSTOM_FILENAME if PARTITION_TABLE_CUSTOM
config PARTITION_TABLE_OFFSET
hex "Offset of partition table"
default 0x8000
help
The address of partition table (by default 0x8000).
Allows you to move the partition table, it gives more space for the bootloader.
Note that the bootloader and app will both need to be compiled with the same PARTITION_TABLE_OFFSET value.
This number should be a multiple of 0x1000.
Note that partition offsets in the partition table CSV file may need to be changed if this value is set to
a higher value. To have each partition offset adapt to the configured partition table offset, leave all
partition offsets blank in the CSV file.
config PARTITION_TABLE_MD5
bool "Generate an MD5 checksum for the partition table"
default y
help
Generate an MD5 checksum for the partition table for protecting the
integrity of the table. The generation should be turned off for legacy
bootloaders which cannot recognize the MD5 checksum in the partition
table.
endmenu