esp-idf/examples/wifi/itwt/main/Kconfig.projbuild

160 lines
5.1 KiB
Plaintext

menu "Example Configuration"
config EXAMPLE_WIFI_SSID
string "WiFi SSID"
default "myssid"
help
SSID (network name) for the example to connect to.
config EXAMPLE_WIFI_PASSWORD
string "WiFi Password"
default "mypassword"
help
WiFi password (WPA or WPA2) for the example to use.
config EXAMPLE_ENABLE_STATIC_IP
bool "enable static ip"
default y
help
Enable static IP
config EXAMPLE_STATIC_IP_ADDR
string "Static IP address"
default "192.168.4.2"
depends on EXAMPLE_ENABLE_STATIC_IP
help
Set static IP address.
config EXAMPLE_STATIC_NETMASK_ADDR
string "Static netmask address"
default "255.255.255.0"
depends on EXAMPLE_ENABLE_STATIC_IP
help
Set static netmask address.
config EXAMPLE_STATIC_GW_ADDR
string "Static gateway address"
default "192.168.4.1"
depends on EXAMPLE_ENABLE_STATIC_IP
help
Set static gateway address.
menu "iTWT Configuration"
config EXAMPLE_ITWT_TRIGGER_ENABLE
bool "trigger-enabled"
default y
help
0- a non-trigger-enabled TWT, 1-a trigger-enabled TWT
config EXAMPLE_ITWT_ANNOUNCED
bool "announced"
default y
help
0- an unannounced TWT, 1-an announced TWT
config EXAMPLE_ITWT_MIN_WAKE_DURA
int "itwt minimum wake duration"
range 1 255
default 255
help
Nominal Minimum Wake Duration, indicates the minimum amount of time, in unit of 256 us, that the TWT
requesting STA expects that it needs to be awake. The value range is [1, 255].
config EXAMPLE_ITWT_WAKE_DURATION_UNIT
int "itwt wake duration unit"
range 0 1
default 0
help
TWT wake duration unit, 0: 256us 1: TU (TU = 1024us)
config EXAMPLE_ITWT_WAKE_INVL_EXPN
int "itwt wake interval exponent"
range 0 31
default 10
help
TWT Wake Interval Exponent, in microseconds. The value range is [0, 31].
config EXAMPLE_ITWT_WAKE_INVL_MANT
int "itwt wake interval mantissa"
range 1 65535
default 512
help
TWT Wake Interval Mantissa, in microseconds. The value range is [1, 65535].
config EXAMPLE_ITWT_ID
int "itwt connection id"
range 0 32767
default 0
help
TWT Connection id. The value range is [0, 32767].
config EXAMPLE_ITWT_SETUP_TIMEOUT_TIME_MS
int "itwt setup timeout times"
range 100 65535
default 5000
help
TWT setup timeout time, in microseconds. The value range is [100, 65535].
endmenu
choice EXAMPLE_MAX_CPU_FREQ
prompt "Maximum CPU frequency"
default EXAMPLE_MAX_CPU_FREQ_80
depends on PM_ENABLE
help
Maximum CPU frequency to use for dynamic frequency scaling.
config EXAMPLE_MAX_CPU_FREQ_80
bool "80 MHz"
config EXAMPLE_MAX_CPU_FREQ_120
bool "120 MHz"
depends on IDF_TARGET_ESP32C2
config EXAMPLE_MAX_CPU_FREQ_160
bool "160 MHz"
depends on !IDF_TARGET_ESP32C2
config EXAMPLE_MAX_CPU_FREQ_240
bool "240 MHz"
depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
endchoice
config EXAMPLE_MAX_CPU_FREQ_MHZ
int
default 80 if EXAMPLE_MAX_CPU_FREQ_80
default 120 if EXAMPLE_MAX_CPU_FREQ_120
default 160 if EXAMPLE_MAX_CPU_FREQ_160
default 240 if EXAMPLE_MAX_CPU_FREQ_240
choice EXAMPLE_MIN_CPU_FREQ
prompt "Minimum CPU frequency"
default EXAMPLE_MIN_CPU_FREQ_10M
depends on PM_ENABLE
help
Minimum CPU frequency to use for dynamic frequency scaling.
Should be set to XTAL frequency or XTAL frequency divided by integer.
config EXAMPLE_MIN_CPU_FREQ_40M
bool "40 MHz (use with 40MHz XTAL)"
depends on XTAL_FREQ_40 || XTAL_FREQ_AUTO
config EXAMPLE_MIN_CPU_FREQ_20M
bool "20 MHz (use with 40MHz XTAL)"
depends on XTAL_FREQ_40 || XTAL_FREQ_AUTO
config EXAMPLE_MIN_CPU_FREQ_10M
bool "10 MHz (use with 40MHz XTAL)"
depends on XTAL_FREQ_40 || XTAL_FREQ_AUTO
config EXAMPLE_MIN_CPU_FREQ_26M
bool "26 MHz (use with 26MHz XTAL)"
depends on XTAL_FREQ_26 || XTAL_FREQ_AUTO
config EXAMPLE_MIN_CPU_FREQ_13M
bool "13 MHz (use with 26MHz XTAL)"
depends on XTAL_FREQ_26 || XTAL_FREQ_AUTO
endchoice
config EXAMPLE_MIN_CPU_FREQ_MHZ
int
default 40 if EXAMPLE_MIN_CPU_FREQ_40M
default 20 if EXAMPLE_MIN_CPU_FREQ_20M
default 10 if EXAMPLE_MIN_CPU_FREQ_10M
default 26 if EXAMPLE_MIN_CPU_FREQ_26M
default 13 if EXAMPLE_MIN_CPU_FREQ_13M
endmenu