esp-idf/examples/protocols/sockets/udp_server/main/udp_server.c

/* BSD Socket API Example

   This example code is in the Public Domain (or CC0 licensed, at your option.)

   Unless required by applicable law or agreed to in writing, this
   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
   CONDITIONS OF ANY KIND, either express or implied.
*/
#include <string.h>
#include <sys/param.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "esp_wifi.h"
#include "esp_event.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "esp_netif.h"
#include "protocol_examples_common.h"

#include "lwip/err.h"
#include "lwip/sockets.h"
#include "lwip/sys.h"
#include <lwip/netdb.h>

#define PORT CONFIG_EXAMPLE_PORT

static const char *TAG = "example";

static void udp_server_task(void *pvParameters)
{
    char rx_buffer[128];
    char addr_str[128];
    int addr_family = (int)pvParameters;
    int ip_protocol = 0;
    struct sockaddr_in6 dest_addr;

    while (1) {

        if (addr_family == AF_INET) {
            struct sockaddr_in *dest_addr_ip4 = (struct sockaddr_in *)&dest_addr;
            dest_addr_ip4->sin_addr.s_addr = htonl(INADDR_ANY);
            dest_addr_ip4->sin_family = AF_INET;
            dest_addr_ip4->sin_port = htons(PORT);
            ip_protocol = IPPROTO_IP;
        } else if (addr_family == AF_INET6) {
            bzero(&dest_addr.sin6_addr.un, sizeof(dest_addr.sin6_addr.un));
            dest_addr.sin6_family = AF_INET6;
            dest_addr.sin6_port = htons(PORT);
            ip_protocol = IPPROTO_IPV6;
        }

        int sock = socket(addr_family, SOCK_DGRAM, ip_protocol);
        if (sock < 0) {
            ESP_LOGE(TAG, "Unable to create socket: errno %d", errno);
            break;
        }
        ESP_LOGI(TAG, "Socket created");

#if defined(CONFIG_LWIP_NETBUF_RECVINFO) && !defined(CONFIG_EXAMPLE_IPV6)
        int enable = 1;
        lwip_setsockopt(sock, IPPROTO_IP, IP_PKTINFO, &enable, sizeof(enable));
#endif

#if defined(CONFIG_EXAMPLE_IPV4) && defined(CONFIG_EXAMPLE_IPV6)
        if (addr_family == AF_INET6) {
            // Note that by default IPV6 binds to both protocols, it is must be disabled
            // if both protocols used at the same time (used in CI)
            int opt = 1;
            setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt));
            setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, &opt, sizeof(opt));
        }
#endif
        // Set timeout
        struct timeval timeout;
        timeout.tv_sec = 10;
        timeout.tv_usec = 0;
        setsockopt (sock, SOL_SOCKET, SO_RCVTIMEO, &timeout, sizeof timeout);

        int err = bind(sock, (struct sockaddr *)&dest_addr, sizeof(dest_addr));
        if (err < 0) {
            ESP_LOGE(TAG, "Socket unable to bind: errno %d", errno);
        }
        ESP_LOGI(TAG, "Socket bound, port %d", PORT);

        struct sockaddr_storage source_addr; // Large enough for both IPv4 or IPv6
        socklen_t socklen = sizeof(source_addr);

#if defined(CONFIG_LWIP_NETBUF_RECVINFO) && !defined(CONFIG_EXAMPLE_IPV6)
        struct iovec iov;
        struct msghdr msg;
        struct cmsghdr *cmsgtmp;
        u8_t cmsg_buf[CMSG_SPACE(sizeof(struct in_pktinfo))];

        iov.iov_base = rx_buffer;
        iov.iov_len = sizeof(rx_buffer);
        msg.msg_control = cmsg_buf;
        msg.msg_controllen = sizeof(cmsg_buf);
        msg.msg_flags = 0;
        msg.msg_iov = &iov;
        msg.msg_iovlen = 1;
        msg.msg_name = (struct sockaddr *)&source_addr;
        msg.msg_namelen = socklen;
#endif

        while (1) {
            ESP_LOGI(TAG, "Waiting for data");
#if defined(CONFIG_LWIP_NETBUF_RECVINFO) && !defined(CONFIG_EXAMPLE_IPV6)
            int len = recvmsg(sock, &msg, 0);
#else
            int len = recvfrom(sock, rx_buffer, sizeof(rx_buffer) - 1, 0, (struct sockaddr *)&source_addr, &socklen);
#endif
            // Error occurred during receiving
            if (len < 0) {
                ESP_LOGE(TAG, "recvfrom failed: errno %d", errno);
                break;
            }
            // Data received
            else {
                // Get the sender's ip address as string
                if (source_addr.ss_family == PF_INET) {
                    inet_ntoa_r(((struct sockaddr_in *)&source_addr)->sin_addr, addr_str, sizeof(addr_str) - 1);
#if defined(CONFIG_LWIP_NETBUF_RECVINFO) && !defined(CONFIG_EXAMPLE_IPV6)
                    for ( cmsgtmp = CMSG_FIRSTHDR(&msg); cmsgtmp != NULL; cmsgtmp = CMSG_NXTHDR(&msg, cmsgtmp) ) {
                        if ( cmsgtmp->cmsg_level == IPPROTO_IP && cmsgtmp->cmsg_type == IP_PKTINFO ) {
                            struct in_pktinfo *pktinfo;
                            pktinfo = (struct in_pktinfo*)CMSG_DATA(cmsgtmp);
                            ESP_LOGI(TAG, "dest ip: %s\n", inet_ntoa(pktinfo->ipi_addr));
                        }
                    }
#endif
                } else if (source_addr.ss_family == PF_INET6) {
                    inet6_ntoa_r(((struct sockaddr_in6 *)&source_addr)->sin6_addr, addr_str, sizeof(addr_str) - 1);
                }

                rx_buffer[len] = 0; // Null-terminate whatever we received and treat like a string...
                ESP_LOGI(TAG, "Received %d bytes from %s:", len, addr_str);
                ESP_LOGI(TAG, "%s", rx_buffer);

                int err = sendto(sock, rx_buffer, len, 0, (struct sockaddr *)&source_addr, sizeof(source_addr));
                if (err < 0) {
                    ESP_LOGE(TAG, "Error occurred during sending: errno %d", errno);
                    break;
                }
            }
        }

        if (sock != -1) {
            ESP_LOGE(TAG, "Shutting down socket and restarting...");
            shutdown(sock, 0);
            close(sock);
        }
    }
    vTaskDelete(NULL);
}

void app_main(void)
{
    ESP_ERROR_CHECK(nvs_flash_init());
    ESP_ERROR_CHECK(esp_netif_init());
    ESP_ERROR_CHECK(esp_event_loop_create_default());

    /* This helper function configures Wi-Fi or Ethernet, as selected in menuconfig.
     * Read "Establishing Wi-Fi or Ethernet Connection" section in
     * examples/protocols/README.md for more information about this function.
     */
    ESP_ERROR_CHECK(example_connect());

#ifdef CONFIG_EXAMPLE_IPV4
    xTaskCreate(udp_server_task, "udp_server", 4096, (void*)AF_INET, 5, NULL);
#endif
#ifdef CONFIG_EXAMPLE_IPV6
    xTaskCreate(udp_server_task, "udp_server", 4096, (void*)AF_INET6, 5, NULL);
#endif

}