Li Shuai 200f69e6eb auto beacon: support esp32c6 autobeacon (advanced DTIM sleep feature) ... modem retention: Support esp32c6 wifi MAC and baseband sleep retention sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep add i2c_ana master header file to project auto beacon: release PMU's lock on root clock source (it is locked in the PLL) wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL clock, PMU will forcibly lock the root clock source as PLL, when the root clock source of the software system is selected as PLL, we need to release the root clock source locking. When it is judged that the PLL is locked by PMU after wakeing up from the PMU modem state, switch the root clock source to the PLL in the sleep process (a critical section). auto beacon: fix the failure to receive broadcast/multicast frames in modem state When the multicast field in the beacon frame received in the PMU modem state is True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to stabilize and then restores the MAC context) and starts to receive broadcast/multicast frames (Broadcast/Multicast frames will be sent after a minimum delay of 48 us after the beacon frame), because the PMU waits for the HP LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame reception to be missed. auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state update Digital Peripheral (M2A switch) REGDMA restore time parameter auto beacon: fix the issue that only channel 1 can connect to AP in modem state		2023-03-04 00:17:40 +08:00
..
esp_adapter.c	auto beacon: support esp32c6 autobeacon (advanced DTIM sleep feature)	2023-03-04 00:17:40 +08:00