mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
31b2702387
esp_netif_init() returns standard esp_err_t error code (unlike tcpip_adapter init), so shall be checked for the return value Also to make the initialization code more consistent.
131 lines
5.3 KiB
C
131 lines
5.3 KiB
C
/* Ethernet Basic Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_netif.h"
|
|
#include "esp_eth.h"
|
|
#include "esp_event.h"
|
|
#include "esp_log.h"
|
|
#include "driver/gpio.h"
|
|
#include "sdkconfig.h"
|
|
|
|
static const char *TAG = "eth_example";
|
|
|
|
/** Event handler for Ethernet events */
|
|
static void eth_event_handler(void *arg, esp_event_base_t event_base,
|
|
int32_t event_id, void *event_data)
|
|
{
|
|
uint8_t mac_addr[6] = {0};
|
|
/* we can get the ethernet driver handle from event data */
|
|
esp_eth_handle_t eth_handle = *(esp_eth_handle_t *)event_data;
|
|
|
|
switch (event_id) {
|
|
case ETHERNET_EVENT_CONNECTED:
|
|
esp_eth_ioctl(eth_handle, ETH_CMD_G_MAC_ADDR, mac_addr);
|
|
ESP_LOGI(TAG, "Ethernet Link Up");
|
|
ESP_LOGI(TAG, "Ethernet HW Addr %02x:%02x:%02x:%02x:%02x:%02x",
|
|
mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
|
|
break;
|
|
case ETHERNET_EVENT_DISCONNECTED:
|
|
ESP_LOGI(TAG, "Ethernet Link Down");
|
|
break;
|
|
case ETHERNET_EVENT_START:
|
|
ESP_LOGI(TAG, "Ethernet Started");
|
|
break;
|
|
case ETHERNET_EVENT_STOP:
|
|
ESP_LOGI(TAG, "Ethernet Stopped");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** Event handler for IP_EVENT_ETH_GOT_IP */
|
|
static void got_ip_event_handler(void *arg, esp_event_base_t event_base,
|
|
int32_t event_id, void *event_data)
|
|
{
|
|
ip_event_got_ip_t *event = (ip_event_got_ip_t *) event_data;
|
|
const esp_netif_ip_info_t *ip_info = &event->ip_info;
|
|
|
|
ESP_LOGI(TAG, "Ethernet Got IP Address");
|
|
ESP_LOGI(TAG, "~~~~~~~~~~~");
|
|
ESP_LOGI(TAG, "ETHIP:" IPSTR, IP2STR(&ip_info->ip));
|
|
ESP_LOGI(TAG, "ETHMASK:" IPSTR, IP2STR(&ip_info->netmask));
|
|
ESP_LOGI(TAG, "ETHGW:" IPSTR, IP2STR(&ip_info->gw));
|
|
ESP_LOGI(TAG, "~~~~~~~~~~~");
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
// Initialize TCP/IP network interface (should be called only once in application)
|
|
ESP_ERROR_CHECK(esp_netif_init());
|
|
// Create default event loop that running in background
|
|
ESP_ERROR_CHECK(esp_event_loop_create_default());
|
|
esp_netif_config_t cfg = ESP_NETIF_DEFAULT_ETH();
|
|
esp_netif_t *eth_netif = esp_netif_new(&cfg);
|
|
// Set default handlers to process TCP/IP stuffs
|
|
ESP_ERROR_CHECK(esp_eth_set_default_handlers(eth_netif));
|
|
// Register user defined event handers
|
|
ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, ð_event_handler, NULL));
|
|
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &got_ip_event_handler, NULL));
|
|
|
|
eth_mac_config_t mac_config = ETH_MAC_DEFAULT_CONFIG();
|
|
eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
|
|
phy_config.phy_addr = CONFIG_EXAMPLE_ETH_PHY_ADDR;
|
|
phy_config.reset_gpio_num = CONFIG_EXAMPLE_ETH_PHY_RST_GPIO;
|
|
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
|
mac_config.smi_mdc_gpio_num = CONFIG_EXAMPLE_ETH_MDC_GPIO;
|
|
mac_config.smi_mdio_gpio_num = CONFIG_EXAMPLE_ETH_MDIO_GPIO;
|
|
esp_eth_mac_t *mac = esp_eth_mac_new_esp32(&mac_config);
|
|
#if CONFIG_EXAMPLE_ETH_PHY_IP101
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_ip101(&phy_config);
|
|
#elif CONFIG_EXAMPLE_ETH_PHY_RTL8201
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_rtl8201(&phy_config);
|
|
#elif CONFIG_EXAMPLE_ETH_PHY_LAN8720
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_lan8720(&phy_config);
|
|
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
|
|
#endif
|
|
#elif CONFIG_EXAMPLE_USE_DM9051
|
|
gpio_install_isr_service(0);
|
|
spi_device_handle_t spi_handle = NULL;
|
|
spi_bus_config_t buscfg = {
|
|
.miso_io_num = CONFIG_EXAMPLE_DM9051_MISO_GPIO,
|
|
.mosi_io_num = CONFIG_EXAMPLE_DM9051_MOSI_GPIO,
|
|
.sclk_io_num = CONFIG_EXAMPLE_DM9051_SCLK_GPIO,
|
|
.quadwp_io_num = -1,
|
|
.quadhd_io_num = -1,
|
|
};
|
|
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_DM9051_SPI_HOST, &buscfg, 1));
|
|
spi_device_interface_config_t devcfg = {
|
|
.command_bits = 1,
|
|
.address_bits = 7,
|
|
.mode = 0,
|
|
.clock_speed_hz = CONFIG_EXAMPLE_DM9051_SPI_CLOCK_MHZ * 1000 * 1000,
|
|
.spics_io_num = CONFIG_EXAMPLE_DM9051_CS_GPIO,
|
|
.queue_size = 20
|
|
};
|
|
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_DM9051_SPI_HOST, &devcfg, &spi_handle));
|
|
/* dm9051 ethernet driver is based on spi driver */
|
|
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(spi_handle);
|
|
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_DM9051_INT_GPIO;
|
|
esp_eth_mac_t *mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_dm9051(&phy_config);
|
|
#endif
|
|
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
|
|
esp_eth_handle_t eth_handle = NULL;
|
|
ESP_ERROR_CHECK(esp_eth_driver_install(&config, ð_handle));
|
|
/* attach Ethernet driver to TCP/IP stack */
|
|
ESP_ERROR_CHECK(esp_netif_attach(eth_netif, esp_eth_new_netif_glue(eth_handle)));
|
|
/* start Ethernet driver state machine */
|
|
ESP_ERROR_CHECK(esp_eth_start(eth_handle));
|
|
}
|