mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
356 lines
13 KiB
ReStructuredText
356 lines
13 KiB
ReStructuredText
Inter-IC Sound (I2S)
|
|
====================
|
|
|
|
{IDF_TARGET_I2S_NUM:default="two", esp32s2="one", esp32c3="one"}
|
|
|
|
Overview
|
|
--------
|
|
|
|
I2S (Inter-IC Sound) is a serial, synchronous communication protocol that is usually used for transmitting audio data between two digital audio devices.
|
|
|
|
{IDF_TARGET_NAME} contains {IDF_TARGET_I2S_NUM} I2S peripheral(s). These peripherals can be configured to input and output sample data via the I2S driver.
|
|
|
|
An I2S bus consists of the following lines:
|
|
|
|
- Master clock line (operational)
|
|
- Bit clock line
|
|
- Channel select line
|
|
- Serial data line
|
|
|
|
Each I2S controller has the following features that can be configured using the I2S driver:
|
|
|
|
- Operation as system master or slave
|
|
- Capable of acting as transmitter or receiver
|
|
- DMA controller that allows for streaming sample data without requiring the CPU to copy each data sample
|
|
|
|
Each controller can operate in half-duplex communication mode. Thus, the two controllers can be combined to establish full-duplex communication.
|
|
|
|
.. only:: esp32
|
|
|
|
I2S0 output can be routed directly to the digital-to-analog converter's (DAC) output channels (GPIO 25 & GPIO 26) to produce direct analog output without involving any external I2S codecs. I2S0 can also be used for transmitting PDM (Pulse-density modulation) signals.
|
|
|
|
.. only:: esp32 or esp32s2
|
|
|
|
The I2S peripherals also support LCD mode for communicating data over a parallel bus, as used by some LCD displays and camera modules. LCD mode has the following operational modes:
|
|
|
|
- LCD master transmitting mode
|
|
- Camera slave receiving mode
|
|
- ADC/DAC mode
|
|
|
|
For more information, see *{IDF_TARGET_NAME} Technical Reference Manual* > *I2S Controller (I2S)* > LCD Mode [`PDF <{IDF_TARGET_TRM_EN_URL}#camlcdctrl>`__].
|
|
|
|
.. only:: SOC_I2S_SUPPORTS_APLL
|
|
|
|
.. note::
|
|
|
|
For high accuracy clock applications, use the APLL_CLK clock source, which has the frequency range of 16 ~ 128 MHz. You can enable the APLL_CLK clock source by setting :cpp:member:`i2s_config_t::use_apll` to ``TRUE``.
|
|
|
|
If :cpp:member:`i2s_config_t::use_apll` = ``TRUE`` and :cpp:member:`i2s_config_t::fixed_mclk` > ``0``, then the master clock output frequency for I2S will be equal to the value of :cpp:member:`i2s_config_t::fixed_mclk`, which means that the mclk frequency is provided by the user, instead of being calculated by the driver.
|
|
|
|
The clock rate of the word select line, which is called audio left-right clock rate (LRCK) here, is always the divisor of the master clock output frequency and for which the following is always true: 0 < MCLK/LRCK/channels/bits_per_sample < 64.
|
|
|
|
|
|
Functional Overview
|
|
-------------------
|
|
|
|
|
|
Installing the Driver
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Install the I2S driver by calling the function :cpp:func`i2s_driver_install` and passing the following arguments:
|
|
|
|
- Port number
|
|
- The structure :cpp:type:`i2s_config_t` with defined communication parameters
|
|
- Event queue size and handle
|
|
|
|
Once :cpp:func`i2s_driver_install` returns ``ESP_OK``, it means I2S has started.
|
|
|
|
Configuration example:
|
|
|
|
.. only:: not SOC_I2S_SUPPORTS_TDM
|
|
|
|
.. code-block:: c
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_STAND_I2S
|
|
.tx_desc_auto_clear = false,
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.use_apll = false,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 // Interrupt level 1, default 0
|
|
};
|
|
|
|
i2s_driver_install(I2S_NUM, &i2s_config, 0, NULL);
|
|
|
|
.. only:: SOC_I2S_SUPPORTS_TDM
|
|
|
|
.. code-block:: c
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
|
|
.tx_desc_auto_clear = false,
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.bits_per_chan = I2S_BITS_PER_SAMPLE_16BIT
|
|
};
|
|
|
|
i2s_driver_install(I2S_NUM, &i2s_config, 0, NULL);
|
|
|
|
Setting Communication Pins
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Once the driver is installed, configure physical GPIO pins to which signals will be routed. For this, call the function :cpp:func`i2s_set_pin` and pass the following arguments to it:
|
|
|
|
- Port number
|
|
- The structure :cpp:type:`i2s_pin_config_t` defining the GPIO pin numbers to which the driver should route the MCK, BCK, WS, DATA out, and DATA in signals. If you want to keep a currently allocated pin number for a specific signal, or if this signal is unused, then pass the macro :c:macro:`I2S_PIN_NO_CHANGE`. See the example below.
|
|
|
|
.. note::
|
|
|
|
MCK only takes effect in `I2S_MODE_MASTER` mode.
|
|
|
|
.. code-block:: c
|
|
|
|
static const i2s_pin_config_t pin_config = {
|
|
.mck_io_num = 0,
|
|
.bck_io_num = 4,
|
|
.ws_io_num = 5,
|
|
.data_out_num = 18,
|
|
.data_in_num = I2S_PIN_NO_CHANGE
|
|
};
|
|
|
|
i2s_set_pin(i2s_num, &pin_config);
|
|
|
|
Running I2S Communication
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
To perform a transmission:
|
|
|
|
- Prepare the data for sending
|
|
- Call the function :cpp:func:`i2s_write` and pass the data buffer address and data length to it
|
|
|
|
The function will write the data to the DMA Tx buffer, and then the data will be transmitted automatically.
|
|
|
|
.. code-block:: c
|
|
|
|
i2s_write(I2S_NUM, samples_data, ((bits+8)/16)*SAMPLE_PER_CYCLE*4, &i2s_bytes_write, 100);
|
|
|
|
To retrieve received data, use the function :cpp:func:`i2s_read`. It will retrieve the data from the DMA Rx buffer, once the data is received by the I2S controller.
|
|
|
|
.. code-block:: c
|
|
|
|
i2s_read(I2S_NUM, data_recv, ((bits+8)/16)*SAMPLE_PER_CYCLE*4, &i2s_bytes_read, 100);
|
|
|
|
You can temporarily stop the I2S driver by calling the function :cpp:func:`i2s_stop`, which will disable the I2S Tx/Rx units until the function :cpp:func:`i2s_start` is called. If the function :cpp:func`i2s_driver_install` is used, the driver will start up automatically eliminating the need to call :cpp:func:`i2s_start`.
|
|
|
|
|
|
Deleting the Driver
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
If the established communication is no longer required, the driver can be removed to free allocated resources by calling :cpp:func:`i2s_driver_uninstall`.
|
|
|
|
|
|
Application Example
|
|
-------------------
|
|
|
|
A code example for the I2S driver can be found in the directory :example:`peripherals/i2s`.
|
|
|
|
.. only:: SOC_I2S_SUPPORTS_ADC_DAC
|
|
|
|
In addition, there are two short configuration examples for the I2S driver.
|
|
|
|
.. only:: not SOC_I2S_SUPPORTS_ADC_DAC
|
|
|
|
In addition, there is a short configuration examples for the I2S driver.
|
|
|
|
I2S configuration
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
Example for general usage.
|
|
|
|
.. only:: not SOC_I2S_SUPPORTS_TDM
|
|
|
|
.. code-block:: c
|
|
|
|
#include "driver/i2s.h"
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_STAND_I2S
|
|
.tx_desc_auto_clear = false,
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.use_apll = false,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 // Interrupt level 1, default 0
|
|
};
|
|
|
|
static const i2s_pin_config_t pin_config = {
|
|
.bck_io_num = 4,
|
|
.ws_io_num = 5,
|
|
.data_out_num = 18,
|
|
.data_in_num = I2S_PIN_NO_CHANGE
|
|
};
|
|
|
|
i2s_driver_install(i2s_num, &i2s_config, 0, NULL); //install and start i2s driver
|
|
i2s_set_pin(i2s_num, &pin_config);
|
|
|
|
...
|
|
/* You can reset parameters by calling 'i2s_set_clk'
|
|
*
|
|
* The low 16 bits are the valid data bits in one chan and the high 16 bits are
|
|
* the total bits in one chan. If high 16 bits is smaller than low 16 bits, it will
|
|
* be set to a same value as low 16 bits.
|
|
*/
|
|
uint32_t bits_cfg = (I2S_BITS_PER_CHAN_32BIT << 16) | I2S_BITS_PER_SAMPLE_16BIT;
|
|
i2s_set_clk(i2s_num, 22050, bits_cfg, I2S_CHANNEL_STEREO);
|
|
...
|
|
|
|
i2s_driver_uninstall(i2s_num); //stop & destroy i2s driver
|
|
|
|
.. only:: SOC_I2S_SUPPORTS_TDM
|
|
|
|
.. code-block:: c
|
|
|
|
#include "driver/i2s.h"
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_STAND_I2S
|
|
.tx_desc_auto_clear = false,
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64
|
|
};
|
|
|
|
static const i2s_pin_config_t pin_config = {
|
|
.bck_io_num = 4,
|
|
.ws_io_num = 5,
|
|
.data_out_num = 18,
|
|
.data_in_num = I2S_PIN_NO_CHANGE
|
|
};
|
|
|
|
i2s_driver_install(i2s_num, &i2s_config, 0, NULL); //install and start i2s driver
|
|
i2s_set_pin(i2s_num, &pin_config);
|
|
|
|
...
|
|
/* You can reset parameters by calling 'i2s_set_clk'
|
|
*
|
|
* The low 16 bits are the valid data bits in one chan and the high 16 bits are
|
|
* the total bits in one chan. If high 16 bits is smaller than low 16 bits, it will
|
|
* be set to a same value as low 16 bits.
|
|
*/
|
|
uint32_t bits_cfg = (I2S_BITS_PER_CHAN_32BIT << 16) | I2S_BITS_PER_SAMPLE_16BIT;
|
|
i2s_set_clk(i2s_num, 22050, bits_cfg, I2S_CHANNEL_STEREO);
|
|
...
|
|
|
|
i2s_driver_uninstall(i2s_num); //stop & destroy i2s driver
|
|
|
|
I2S on {IDF_TARGET_NAME} support TDM mode, up to 16 channels are available in TDM mode. If you want to use TDM mode, set field ``channel_format`` of :cpp:type:`i2s_config_t` to ``I2S_CHANNEL_FMT_MULTIPLE``. Then enable the channels by setting ``chan_mask`` using masks in :cpp:type:`i2s_channel_t`, the number of active channels and total channels will be calculate automatically. Also you can set a particular total channel number for it, but it shouldn't be smaller than the largest channel you use.
|
|
|
|
If active channels are discrete, the inactive channels within total channels will be filled by a constant automatically. But if ``skip_msk`` is enabled, these inactive channels will be skiped.
|
|
|
|
.. code-block:: c
|
|
|
|
#include "driver/i2s.h"
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
|
.channel_format = I2S_CHANNEL_FMT_MULTIPLE,
|
|
.communication_format = I2S_COMM_FORMAT_STAND_I2S
|
|
.tx_desc_auto_clear = false,
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH2
|
|
};
|
|
|
|
static const i2s_pin_config_t pin_config = {
|
|
.bck_io_num = 4,
|
|
.ws_io_num = 5,
|
|
.data_out_num = 18,
|
|
.data_in_num = I2S_PIN_NO_CHANGE
|
|
};
|
|
|
|
i2s_driver_install(i2s_num, &i2s_config, 0, NULL); //install and start i2s driver
|
|
i2s_set_pin(i2s_num, &pin_config);
|
|
|
|
...
|
|
/* You can reset parameters by calling 'i2s_set_clk'
|
|
*
|
|
* The low 16 bits are the valid data bits in one chan and the high 16 bits are
|
|
* the total bits in one chan. If high 16 bits is smaller than low 16 bits, it will
|
|
* be set to a same value as low 16 bits.
|
|
*/
|
|
uint32_t bits_cfg = (I2S_BITS_PER_CHAN_32BIT << 16) | I2S_BITS_PER_SAMPLE_16BIT;
|
|
i2s_set_clk(i2s_port_t i2s_num, 22050, bits_cfg, I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1); // set clock
|
|
...
|
|
|
|
i2s_driver_uninstall(i2s_num); //stop & destroy i2s driver
|
|
|
|
.. only:: SOC_I2S_SUPPORTS_ADC_DAC
|
|
|
|
Configuring I2S to use internal DAC for analog output
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
.. code-block:: c
|
|
|
|
#include "driver/i2s.h"
|
|
#include "freertos/queue.h"
|
|
|
|
static const int i2s_num = 0; // i2s port number
|
|
|
|
static const i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX | I2S_MODE_DAC_BUILT_IN,
|
|
.sample_rate = 44100,
|
|
.bits_per_sample = 16, /* the DAC module will only take the 8bits from MSB */
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.intr_alloc_flags = 0, // default interrupt priority
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.use_apll = false
|
|
};
|
|
|
|
...
|
|
|
|
i2s_driver_install(i2s_num, &i2s_config, 0, NULL); //install and start i2s driver
|
|
|
|
i2s_set_pin(i2s_num, NULL); //for internal DAC, this will enable both of the internal channels
|
|
|
|
//You can call i2s_set_dac_mode to set built-in DAC output mode.
|
|
//i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
|
|
|
|
i2s_set_sample_rates(i2s_num, 22050); //set sample rates
|
|
|
|
i2s_driver_uninstall(i2s_num); //stop & destroy i2s driver
|
|
|
|
|
|
API Reference
|
|
-------------
|
|
|
|
.. include-build-file:: inc/i2s.inc
|
|
.. include-build-file:: inc/i2s_types.inc
|
|
|