mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
1d71178193
- Avoid downgrading TLS ciphersuites when client RSA keys are larger than RSA-2048 bit. - Note that when using bigger certificates on low-power chips without crypto hardware acceleration, it is recommended to adjust the task watchdog timer (TWDT) if it is enabled. For precise information on timing requirements, you can check performance numbers at https://github.com/espressif/mbedtls/wiki/Performance-Numbers. |
||
---|---|---|
.. | ||
antenna | ||
espnow | ||
fast_scan | ||
ftm | ||
getting_started | ||
iperf | ||
itwt | ||
power_save | ||
roaming | ||
scan | ||
smart_config | ||
softap_sta | ||
wifi_aware | ||
wifi_eap_fast | ||
wifi_easy_connect/dpp-enrollee | ||
wifi_enterprise | ||
wps | ||
wps_softap_registrar | ||
.build-test-rules.yml | ||
README.md |
Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
---|
Wi-Fi Examples
This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.
Example Layout
The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:
espnow
is the connectionless Wi-Fi communication protocol.fast_scan
shows how to use fast scan while connecting to an AP.ftm
is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.getting_started
contains the basic examples for using Wi-Fi in STA and AP mode.iperf
shows the common performance measurements for two ESP running this example.power_save
contains a how to use power save mode of Wi-Fi.roaming
contains a example using 802.11k and 802.11v APIs.scan
shows how to scan for all the available APs.smart_config
shows how ESP connects to a target AP with ESPTOUCH.wifi_eap_fast
shows how ESP connects to AP with Wi-Fi enterprise encryption using the EAP-FAST method.wifi_easy_connect
shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).wpa2_enterprise
shows how ESP connects to AP with WPA2 enterprise encryption.wps
contains a how to use the Wi-Fi Protected Setup protocol.
More
See the README.md file in the upper level examples directory for more information about examples.