esp-idf/examples/peripherals/usb
Tomas Rezucha 62091b4fa0 fix(usb/uvc): Add negotiation retry for some cameras
Some cameras would refuse first stream format and would only accept
on second retry.
2023-11-29 11:34:47 +08:00
..
device fix(usb/uvc): Add negotiation retry for some cameras 2023-11-29 11:34:47 +08:00
host fix(usb/uvc): Add negotiation retry for some cameras 2023-11-29 11:34:47 +08:00
README.md tiny_usb: rename Kconfig name 2021-07-22 10:43:10 +08:00

USB-OTG Examples

See the README.md file in the upper level examples directory for more information about examples.

Common Pin Assignments

Pin assignment is only needed for ESP chips that have an USB-OTG peripheral. If your board doesn't have a USB connector connected to the USB-OTG dedicated GPIOs, you may have to DIY a cable and connect D+ and D- to the pins listed below.

ESP BOARD          USB CONNECTOR (type A)
                          --
                         | || VCC
[USBPHY_DM_NUM]  ------> | || D-
[USBPHY_DP_NUM]  ------> | || D+
                         | || GND
                          --

Refer to soc/usb_pins.h to find the real GPIO number of USBPHY_DP_NUM and USBPHY_DM_NUM.

USB_DP USB_DM
ESP32-S2/S3 GPIO20 GPIO19