esp-idf/examples/protocols/http_server/advanced_tests
Euripedes Rocha cc1526c570 protocols/examples: Disable Wifi connection if not supported
- Disable Kconfig option for Wifi if not supported by the SoC
- Enable building mqtt examples when target is set to esp32h2
2023-07-12 06:19:20 +00:00
..
main Build & config: Remove leftover files from the unsupported "make" build system 2021-11-11 15:32:36 +01:00
scripts tools: remove the dependency on the future package 2022-08-09 16:46:58 +02:00
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
pytest_http_server_advanced.py CI: enable more wifi cases 2023-01-06 06:03:52 +00:00
README.md protocols/examples: Disable Wifi connection if not supported 2023-07-12 06:19:20 +00:00
sdkconfig.ci CI: use ssid password from stdin for pytest cases 2022-07-15 01:16:36 +08:00

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C6 ESP32-H2 ESP32-S2 ESP32-S3

HTTP server advanced tests

(See the README.md file in the upper level 'examples' directory for more information about examples.)

HTTP server example to perform some advanced tests

How to use example

Hardware Required

  • A development board with ESP32/ESP32-S2/ESP32-C3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
  • A USB cable for power supply and programming

Configure the project

idf.py menuconfig
  • Open the project configuration menu (idf.py menuconfig) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (5561) example_connect: - IPv4 address: 192.168.194.219
I (5561) example_connect: - IPv6 address: fe80:0000:0000:0000:266f:28ff:fe80:2c74, type: ESP_IP6_ADDR_IS_LINK_LOCAL
I (5581) TESTS: Started HTTP server on port: '1234'
I (5581) TESTS: Max URI handlers: '9'
I (5581) TESTS: Max Open Sessions: '7'
I (5591) TESTS: Max Header Length: '512'
I (5591) TESTS: Max URI Length: '512'
I (5601) TESTS: Max Stack Size: '4096'
I (5601) TESTS: Registering basic handlers
I (5601) TESTS: No of handlers = 9
I (5611) TESTS: Success