esp-idf/components/idf_test/integration_test/TC_IT_TCPIP_TCP.yml
2020-07-19 06:32:12 +00:00

4478 lines
125 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

test cases:
- CI ready: 'Yes'
ID: TCPIP_TCP_0101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- P SOC1 C +ACCEPT
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i 123.456.678.789 -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <test_tcp_port2>
- - P SSC1 RE CONNECT:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.ERROR
6.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socketbind到本地ip 0.0.0.0,本地端口 0
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.target1上创建TCP socketbind到本地ip 0.0.0.0,本地端口 0
5.target1上使用步骤4创建的socket,去连接不存在的iprandom_port
6.target1上使用步骤2创建的socket去连接 PC的ip远端端口不存在。
sub module: TCP
summary: STA mode, connect test. use different ip, port
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC1 CONNECT <random_port> <target_ip>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- P SOC_COM C OK
- - SOC SOC1 CONNECT <test_tcp_port2> <target_ip>
- - P SOC_COM C ERROR
- P SSC1 NC ACCEPT
execution time: 0.0
expected result: |-
1.OK
2.OK
3.PC TCP client accept
4.error
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建TCP socketbind到本地端口<random_port>
2.target1上使用步骤1创建的socket,创建TCP 监听
3.PC TCP 连接到target1 <random_port>,<target_ip>
4.PC tcp 连接到不存在的port ,<target_ip>
sub module: TCP
summary: STA mode, server listen test. use different kinds of port
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0103
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 5
- - SSC SSC1 soc -S -s <sock1> -l 1460
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 1460
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc上回accept
4.OK
5.target收到5 byte
6.PC收到5 byte
7.OK,PC 回SOC_RECV=SOC2,RECV_LEN=字节数
initial condition: STAM2
level: Integration
module: TCPIP
steps: |
1. PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iptest_tcp_port1
4.PC与target1 创建好TCP 连接有ACCEPT
5.PC send 5 bytes to 8266
6.8266 send 5 bytes to PC
7.8266 send 1460 to PC.
sub module: TCP
summary: STA mode, send/recv basic test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0104
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock1> -h B
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock2> -h W
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock3> -h R
- - R SSC1 RE SHUTDOWN:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept OK
4.OK
5.OK
6.OK,pc tcp server accept OK
7.OK
8.OK
9.OK,pc tcp server accept OK
10.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port,PC有ACCEPT
4.target1 shutdown socket1 B
5.target1上创建TCP socket
6.target1上使用步骤5创建的socket去连接 PC的iprandom_port,PC有ACCEPT
7.target1 shutdown socket2 W
8.target1上创建TCP socket
9.target1上使用步骤8创建的socket去连接 PC的iprandom_port,PC有ACCEPT
10.target1 shutdown socket3 R
sub module: TCP
summary: STA mode, shutdown basic test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0105
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ip>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- - SSC SSC1 soc -T -s <sock2>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock1>
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.target1关闭socket1
8.target1关闭socket2
9.OK
10.OK,pc tcp server accept成功
11.target1关闭socket1
12.OK
13.OK,pc tcp server accept成功
14.OK
15.target1关闭socket1
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1\n3.target1关闭socket1\n4.target1上创建TCP
socket 端口随机\n5.target1上使用步骤4创建的socket1去监听\n6.PC CONNECT<random_port>,<target_ip>
,tcp 连接创建成功创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n9.target1上创建TCP
socket1\n10.target1上使用步骤10创建的socket1去连接 PC的iprandom_port,PC有ACCEPT\n11.target1关闭socket1\n12.target1上创建TCP
socket1\n13.target1上使用步骤13创建的socket1去连接 PC的iprandom_port,PC有ACCEPT\n14.target1shutdown
socket1\n15.target1关闭socket1"
sub module: TCP
summary: STA mode, close for different types of TCP sockets test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0106
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock4>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock4> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock5>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock5> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4 OK
5.OK,pc tcp server accept成功
6.OK
7.OK,pc tcp server accept成功
8 OK
9.OK,pc tcp server accept成功
10.OK
11.OK,pc tcp server accept成功
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket1
3.target1上使用步骤2创建的socket1去连接 PC的iprandom_port,PC有ACCEPT
4.target1上创建TCP socket2
5.target1上使用步骤4创建的socket2去连接 PC的iprandom_port,PC有ACCEPT
6.target1上创建TCP socket3
7.target1上使用步骤6创建的socket3去连接 PC的iprandom_port,PC有ACCEPT
8.target1上创建TCP socket4
9.target1上使用步骤8创建的socket4去连接 PC的iprandom_port,PC有ACCEPT
10.target1上创建TCP socket5
11.target1上使用步骤10创建的socket5去连接 PC的iprandom_port,PC有ACCEPT
sub module: TCP
summary: STA mode, create max TCP sockets test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0107
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ip>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC3 CONNECT <random_port> <target_ip>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC4 CONNECT <random_port> <target_ip>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC5 CONNECT <random_port> <target_ip>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC6 CONNECT <random_port> <target_ip>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
execution time: 0.0
expected result: |-
1.+BIND:0OK,0.0.0.0
2.OK
3.OK,pc tcp server accept成功
4.OK,pc tcp server accept成功
5.OK,pc tcp server accept成功
6.OK,pc tcp server accept成功
7.OK,pc tcp server accept成功
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1去监听\n3.PC CONNECT<random_port>,<target_ip>
,tcp 连接创建成功创建socket2 \n4.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket3
\n5.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket4 \n6.PC CONNECT<random_port>,<target_ip>
,tcp 连接创建成功创建socket5 \n7.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket6
\ "
sub module: TCP
summary: STA mode, accept max TCP client by server test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0108
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -A -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ip>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- - SSC SSC1 soc -A -s <sock2>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -A -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -A -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
10.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1
3.target1 abort socket1
4.target1上创建TCP socket 端口随机
5.target1上使用步骤4创建的socket1去监听
6.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket2
7.target1 abort socket1
8.target1 abort socket2
9.target1上创建TCP socket1
10.target1上使用步骤10创建的socket1去连接 PC的iptest_tcp_port1,PC有ACCEPT
11.target1 abort socket1
sub module: TCP
summary: STA mode, espconn abort test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0110
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- P SOC1 C +ACCEPT
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i 123.456.678.789 -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip_wifi> -p <test_tcp_port2>
- - P SSC1 RE CONNECT:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.ERROR
6.ERROR
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socketbind到本地ip 0.0.0.0,本地端口 0
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.target1上创建TCP socketbind到本地ip 0.0.0.0,本地端口 0
5.target1上使用步骤4创建的socket,去连接不存在的iprandom_port
6.target1上使用步骤2创建的socket去连接 PC的ip远端端口不存在。
sub module: TCP
summary: AP mode, connect test. use different ip, port
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0111
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC1 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- P SOC_COM C OK
- - SOC SOC1 CONNECT <test_tcp_port2> <target_ap_ip> 0 <pc_ip_wifi>
- - P SOC_COM C ERROR
- P SSC1 NC ACCEPT
execution time: 0.0
expected result: |-
1.OK
2.OK
3.PC TCP client accept
4.error
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建TCP socketbind到本地端口<random_port>
2.target1上使用步骤1创建的socket,创建TCP 监听
3.PC TCP 连接到target1 <random_port>,<target_ip>
4.PC tcp 连接到不存在的port ,<target_ip>
sub module: TCP
summary: AP mode, server listen test. use different kinds of port
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0112
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 5
- - SSC SSC1 soc -S -s <sock1> -l 1460 -n 100
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 146000
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.target收到5byte数据
6.PC收到5byte数据
7.OK,PC 收到146000 byte数据
initial condition: APM2
level: Integration
module: TCPIP
steps: |
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接PC的iptest_tcp_port1
4.PC与target1 创建好TCP 连接有ACCEPT
5.PC send 5 bytes to 8266
6.8266 send 5 bytes to PC
7.8266 send 100 * 1460 to PC.
sub module: TCP
summary: AP mode, send/recv basic test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0113
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock1> -h B
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock2> -h W
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock3> -h R
- - R SSC1 RE SHUTDOWN:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK,pc tcp server accept成功
7.OK
8.OK
9.OK,pc tcp server accept成功
10.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1. PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port,PC有ACCEPT
4.target1 shutdown socket1 B
5.target1上创建TCP socket
6.target1上使用步骤5创建的socket去连接 PC的iprandom_port,PC有ACCEPT
7.target1 shutdown socket2 W
8.target1上创建TCP socket
9.target1上使用步骤8创建的socket去连接 PC的iprandom_port,PC有ACCEPT
10.target1 shutdown socket3 R
sub module: TCP
summary: AP mode, shutdown basic test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0114
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- - SSC SSC1 soc -T -s <sock2>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock1>
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK,target1上accept 成功
7.target1关闭socket1
8.target1关闭socket2
9.OK
10.OK,pc tcp server accept成功
11.target1关闭socket1
12.OK
13.OK,pc tcp server accept成功
14.OK
15.target1关闭socket1
initial condition: APM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1\n3.target1关闭socket1\n4.target1上创建TCP
socket 端口随机\n5.target1上使用步骤4创建的socket1去监听\n6.PC CONNECT<random_port>,<target_ip>
,tcp 连接创建成功创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n9.target1上创建TCP
socket1\n10.target1上使用步骤10创建的socket1去连接 PC的iprandom_port,PC有ACCEPT\n11.target1关闭socket1\n12.target1上创建TCP
socket1\n13.target1上使用步骤13创建的socket1去连接 PC的iprandom_port,PC有ACCEPT\n14.target1shutdown
socket1\n15.target1关闭socket1"
sub module: TCP
summary: AP mode, close for different types of TCP sockets test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0115
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock4>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock4> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock5>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock5> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4 OK
5.OK,pc tcp server accept成功
6.OK
7.OK,pc tcp server accept成功
8 OK
9.OK,pc tcp server accept成功
10.OK
11.OK,pc tcp server accept成功
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket1
3.target1上使用步骤2创建的socket1去连接 PC的iprandom_port,PC有ACCEPT
4.target1上创建TCP socket2
5.target1上使用步骤4创建的socket2去连接 PC的iprandom_port,PC有ACCEPT
6.target1上创建TCP socket3
7.target1上使用步骤6创建的socket3去连接 PC的iprandom_port,PC有ACCEPT
8.target1上创建TCP socket4
9.target1上使用步骤8创建的socket4去连接 PC的iprandom_port,PC有ACCEPT
10.target1上创建TCP socket5
11.target1上使用步骤10创建的socket5去连接 PC的iprandom_port,PC有ACCEPT
sub module: TCP
summary: AP mode, create max TCP sockets test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0116
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC3 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC4 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC5 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC6 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+
execution time: 0.0
expected result: |-
1.+BIND:0OK,0.0.0.0
2.OK
3.OK,pc tcp server accept成功
4.OK,pc tcp server accept成功
5.OK,pc tcp server accept成功
6.OK,pc tcp server accept成功
7.OK,pc tcp server accept成功
initial condition: APM2
level: Integration
module: TCPIP
steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1去监听\n3.PC CONNECT<random_port>,<target_ip>
,tcp 连接创建成功创建socket2 \n4.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket3
\n5.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket4 \n6.PC CONNECT<random_port>,<target_ip>
,tcp 连接创建成功创建socket5 \n7.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket6
\ "
sub module: TCP
summary: AP mode, accept max TCP client by server test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock2>
- - R SSC1 RE LISTEN:\d+,OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock3> -h B
- - P SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -T
- - R SSC1 C +CLOSEALL
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
execution time: 0.0
expected result: |-
1.ok
2.OK
3.ERROR
4.OK
5.OK
6.ERROR
7.OK
8.OK
9.OK
10.OK
11.OK
12.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建UDP传输socketbind到本地ip 0.0.0.0,<test_udp_port1>
3.target1上使用步骤2创建的socket去连接 PC的ip<random_port>
4.target1上创建TCP socket
5.target1上使用步骤4创建的socket,创建TCP 监听
6.target1上使用步骤4创建的socket去连接 PC的ip<random_port>
7.target1上创建TCP socket
8.target1上使用步骤7创建的socket去连接 PC的ip<random_port>
9.target1上关闭步骤7创建的socket
10.target1上使用步骤7创建的socket去连接 PC的ip<random_port>
11.target1上关闭所有创建的socket
12.target1上使用步骤2创建的socket去连接 PC的ip<random_port>
sub module: TCP
summary: STA mode, connect test. use socket in state that can't connect
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0202
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,ERROR
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -L -s <sock2>
- - R SSC1 RE LISTEN:\d+,ERROR
- - SSC SSC1 soc -D -s <sock2>
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -L -s <sock2>
- - R SSC1 RE LISTEN:\d+,ERROR
- - SSC SSC1 soc -L -s 1000
- - R SSC1 RE LISTEN:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.ERROR
4.OK
5.OK
6.ERROR
7.OK
8.ERROR
9.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建UDP传输socketbind到本地ip 0.0.0.0,<test_udp_port1>
3.target1上使用步骤2创建的socket去建立TCP 监听
4.target1上创建TCP socket
5.target1上使用步骤4创建的socket去连接 PC的ip<random_port>
6.target1上使用步骤4创建的socket,创建TCP 监听
7.target1上shutdown 步骤4的socket
8.target1上使用步骤4创建的socket,创建TCP 监听
9.target1上使用不存在socket,创建TCP 监听
sub module: TCP
summary: STA mode, server listen test. use socket in state that can't listen
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0203
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1>
- - R SSC1 RE SEND:\d+,ERROR
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock2>
- - R SSC1 RE SEND:\d+,ERROR
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock2>
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -S -s <sock2>
- - R SSC1 RE SEND:\d+,ERROR
- - SSC SSC1 soc -S -s 1000
- - R SSC1 RE SEND:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.ERROR
4.OK
5.ERROR
6.OK
7.OK
8.ERROR
9.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建UDP传输socket1<test_udp_port1>
3.target1上使用步骤2创建的socket1去发送数据
4.target1上创建TCP socket2
5.target1上使用步骤4创建的socket2去发送数据
6.target1上使用步骤4创建的socket2,创建TCP连接连接成功
7.target1上shutdown 步骤4的socket2
8.target1往socket2发送错误命令发送数据
9.target1上不指定socket往上发送数据
sub module: TCP
summary: send test. use socket in state that can't send
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0204
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -w 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 146000
- - P SOC_COM R *
- - SSC SSC1 soc -W -s <sock1> -o 1
- - P SSC1 RE WORKTHREAD:\d+,OK
- P SSC1 SL <sock1>+2920
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc server accept OK
4.OK
5.OK
6.OK
7.target收到146000 byte
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.PC与target1 创建好TCP 连接有ACCEPT
5.target上不进行recv
6.PC send 100 * 1460 data to target,
7.在target上开始recv
sub module: TCP
summary: STA mode, TCP recv buffer test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_TCP_0206
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i <target_ip>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP -i <target_ip>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock2>
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock3>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ip>
- - R SSC1 A <sock4>:ACCEPT:(\d+),\d+,.+,\d+
- - SSC SSC1 soc -I
- - P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(<sock1>,<target_ip>,<pc_ip>,<random_port>)
- P SSC1 RE "SOCINFO:%%s,82,.+,%%d"%%(<sock3>,<random_port>)
- P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(<sock4>,<target_ip>,<random_port>,<pc_ip>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.PC OK, target1 +ACCEPT:3,2,<pc_ip>,port
10.+SOCINFO:<sock1>,<target_ip>,<pc_ip>,<random_port>
+SOCINFO:<sock2>,<target_ip>,<pc_ip>,<random_port>
+SOCINFO:<sock3>,<random_port>
+SOCINFO:<sock4>,<target_ip>,<random_port>,<pc_ip>
+SOCINF0ALL
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1去连接
PC的iprandom_port,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2去连接
PC的iprandom_port,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3去监听\n9.PC
CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket4 \n10.target1 查询the socket
information"
sub module: TCP
summary: STA mode, TCP get active socket info test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0207
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock2>
- - R SSC1 RE LISTEN:\d+,OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip_wifi> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip_wifi> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock3> -h B
- - P SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip_wifi> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -T
- - R SSC1 C +CLOSEALL
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
execution time: 0.0
expected result: |-
1.ok
2 OK
3.ERROR
4.OK
5.OK
6.ERROR
7.OK
8.OK
9.OK
10.OK
11.OK
12.ERROR
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建UDP传输socketbind到本地ip 0.0.0.0,<test_udp_port1>
3.target1上使用步骤2创建的socket去连接 PC的ip<random_port>
4.target1上创建TCP socket
5.target1上使用步骤4创建的socket,创建TCP 监听
6.target1上使用步骤4创建的socket去连接 PC的ip<random_port>
7.target1上创建TCP socket
8.target1上使用步骤7创建的socket去连接 PC的ip<random_port>
9.target1上关闭步骤7创建的socket
10.target1上使用步骤7创建的socket去连接 PC的ip<random_port>
11.target1上关闭所有创建的socket
12.target1上使用步骤2创建的socket去连接 PC的ip<random_port>
sub module: TCP
summary: AP mode, connect test. use socket in state that can't connect
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0208
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,ERROR
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -L -s <sock2>
- - R SSC1 RE LISTEN:\d+,ERROR
- - SSC SSC1 soc -D -s <sock2>
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -L -s <sock2>
- - R SSC1 RE LISTEN:\d+,ERROR
- - SSC SSC1 soc -L -s 1000
- - R SSC1 RE LISTEN:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.ERROR
4 OK
5.OK
6.ERROR
7.OK
8.ERROR
9.ERROR
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建UDP传输socketbind到本地ip 0.0.0.0,<test_udp_port1>
3.target1上使用步骤2创建的socket去建立TCP 监听
4.target1上创建TCP socket
5.target1上使用步骤4创建的socket去连接 PC的ip<random_port>
6.target1上使用步骤4创建的socket,创建TCP 监听
7.target1上shutdown 步骤4的socket
8.target1上使用步骤4创建的socket,创建TCP 监听
9.target1上使用不存在socket,创建TCP 监听
sub module: TCP
summary: AP mode, server listen test. use socket in state that can't listen
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0210
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -w 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 146000
- - P SOC_COM R *
- - SSC SSC1 soc -W -s <sock1> -o 1
- - P SSC1 RE WORKTHREAD:\d+,OK
- P SSC1 SL <sock1>+2920
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
6.OK
7.收到 146000 数据
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1. PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.PC与target1 创建好TCP 连接有ACCEPT
5.target停止调用recv
6.PC send 100 * 1460 data to 8266,
7.target重新调用recv
sub module: TCP
summary: AP mode, TCP recv buffer test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_TCP_0212
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i <target_ap_ip>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP -i <target_ap_ip>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip_wifi> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -D -s <sock2>
- - R SSC1 RE SHUTDOWN:\d+,OK
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock3>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 A <sock4>:ACCEPT:(\d+),\d+,.+,\d+
- - SSC SSC1 soc -I
- - P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(<sock1>,<target_ap_ip>,<pc_ip_wifi>,<random_port>)
- P SSC1 RE "SOCINFO:%%s,82,.+,%%d"%%(<sock3>,<random_port>)
- P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(<sock4>,<target_ap_ip>,<random_port>,<pc_ip_wifi>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.PC OK, target1 +ACCEPT:3,2,<pc_ip>,port
10.+SOCINFO:<sock1>,<target_ip>,<pc_ip>,<random_port>
+SOCINFO:<sock2>,<target_ip>,<pc_ip>,<random_port>
+SOCINFO:<sock3>,<random_port>
+SOCINFO:<sock4>,<target_ip>,<random_port>,<pc_ip>
+SOCINF0ALL
initial condition: APM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1去连接
PC的iprandom_port,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2去连接
PC的iprandom_port,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3去监听\n9.PC
CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket4 \n10.target1 查询the socket
information"
sub module: TCP
summary: AP mode, TCP get active socket info test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0213
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -A -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC2 CONNECT <random_port> <target_ap_ip> 0 <pc_ip_wifi>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- - SSC SSC1 soc -A -s <sock2>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -A -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -A -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
10.ERROR
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1
3.target1 abort socket1
4.target1上创建TCP socket 端口随机
5.target1上使用步骤4创建的socket1去监听
6.PC CONNECT<random_port>,<target_ip> ,tcp 连接创建成功创建socket2
7.target1 abort socket1
8.target1 abort socket2
9.target1上创建TCP socket1
10.target1上使用步骤10创建的socket1去连接 PC的iptest_tcp_port1,PC有ACCEPT
11.target1 abort socket1
sub module: TCP
summary: AP mode, espconn abort test
test environment: SSC_T1_7
test point 1: basic function
test point 2: use TCP SAP (socket/espconn API) in different state
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0301
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 lev -N -t GET
- - R SSC1 RE NUMBER:\d+,OK
execution time: 0.0
expected result: 1.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: 1.lev -N -t GET
sub module: TCP
summary: STA mode, max connections number query
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0302
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 lev -N -t SET -n 2
- - R SSC1 C +NUMBER:OK
- - SSC SSC1 lev -N -t SET -n 0
- - R SSC1 C +NUMBER:ERROR
- - SSC SSC1 lev -N -t SET -n 16
- - R SSC1 C +NUMBER:ERROR
- - SSC SSC1 lev -N -t SET -n 15
- - R SSC1 C +NUMBER:OK
- - SSC SSC1 lev -N -t SET -n 8
- - R SSC1 C +NUMBER:OK
execution time: 0.0
expected result: |-
1.OK
2.ERROR
3.ERROR
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.lev -N -t SET -n 2
2.lev -N -t SET -n 0
3.lev -N -t SET -n 15
4.lev -N -t SET -n 16
5.lev -N -t SET -n 8
sub module: TCP
summary: STA mode, max connections number set
test environment: SSC_T1_5
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0303
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 lev -N -t SET -n 3
- - R SSC1 C +NUMBER:OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC3
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC4
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock4>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock4> -i <pc_ip> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -T
- - R SSC1 C +CLOSE
- - SSC SSC1 lev -N -t SET -n 8
- - R SSC1 C +NUMBER:OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
10.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1,本地ip target_ip
3.target1上使用步骤2创建的socket1去连接 pc_ip的iptest_tcp_port1,PC有ACCEPT
4.lev -N -t SET -n 3
5.target1上创建TCP socket3,本地端口random_port
6.target1上使用步骤5创建的socket2去连接 pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT
7.target1上创建TCP socket3,本地端口random_port
8.target1上使用步骤7创建的socket3去连接 pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT
9.target1上创建TCP socket4,本地端口random_port
10.target1上使用步骤5创建的socket4去连接 pc_ip_wifi的iptest_tcp_port1,未连接成功
sub module: TCP
summary: STA mode, max connections fucntion verify
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0304
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 5
- - SSC SSC1 lev -N -t SET -n 3
- - R SSC1 C +NUMBER:OK
- - SOC SOC2 SEND 146000
- - R SSC1 SL <sock1>+146000
- - SSC SSC1 soc -S -s <sock1> -l 1460 -n 100
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 146000
- - SSC SSC1 lev -N -t SET -n 8
- - R SSC1 C +NUMBER:OK
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1,本地ip target_ip
3.target1上使用步骤2创建的socket1去连接 pc_ip的iptest_tcp_port1,PC有ACCEPT
4.PC 往8266发送数据
5.8266往PC 发送数据
6.lev -N -t SET -n 3
7.PC 往8266发送数据 146000
8.8266往PC 发送数据1460*100
9.target1上lev -N -t SET -n 8
sub module: TCP
summary: STA mode, max connections set interact with TCP connect and send
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0305
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC1 CONNECT <random_port> <target_ip>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- P SOC_COM C OK
- - SSC SSC1 lev -A -s <sock1> -t GET
- - 'R SSC1 RE ALLOW:'
- - SSC SSC1 lev -A -s <sock1> -t SET -n 4
- - R SSC1 RE ALLOW:\d+,OK
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.ERROR
5.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1,本地ip target_ip
3.target1上使用步骤2创建的socket1去连接 pc_ip的iptest_tcp_port1,PC有ACCEPT
4.lev -A -s <sock1> -t GET
5.target1上lev -A -s <sock1> -t SET -n 4
sub module: TCP
summary: STA mode, max TCP connection allowed by server test
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0306
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC1 CONNECT <random_port> <target_ip>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- P SOC_COM C OK
- - 'SSC SSC1 lev -K -s <sock2> -t ENABLE '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - 'SSC SSC1 lev -K -s <sock2> -t GET '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - SSC SSC1 lev -K -s <sock2> -t SET -i 30 -d 3 -c 2
- - R SSC1 RE KEEPALIVE:\d+,OK
- - DELAY 30
- - P SOC_COM NC SOC_CLOSED
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.SOC_COM NC SOC_CLOSED
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1去连接
pc_ip的iptest_tcp_port1,PC有ACCEPT\n4.lev -K -s <sock1> -t ENABLE \n5.target1上lev
-K -s <sock1> -t GET \n6.lev -K -s <sock1> -t SET -i 30 -d 3 -c 2\n7.等待30s"
sub module: TCP
summary: STA mode, keep alive test
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0307
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - R SSC1 RE LISTEN:\d+,OK
- - SOC SOC1 CONNECT <random_port> <target_ip>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- R SOC_COM L OK
- - 'SSC SSC1 lev -K -s <sock2> -t ENABLE '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - 'SSC SSC1 lev -K -s <sock2> -t GET '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - SSC SSC1 lev -K -s <sock2> -t SET -i 30 -d 3 -c 2
- - R SSC1 RE KEEPALIVE:\d+,OK
- - SOC SOC1 SEND 5
- - R SSC1 SL <sock2>+5
- - SSC SSC1 soc -S -s <sock2> -l 5
- - P SSC1 RE SEND:\d+,OK
- P SOC1 RL 5
- - SOC SOC1 SEND 146000
- - R SSC1 SL <sock2>+146000
- - SSC SSC1 soc -S -s <sock2> -l 1460 -n 100
- - P SSC1 RE SEND:\d+,OK
- P SOC1 RL 146000
- - DELAY 30
- - P SOC_COM NC SOC_CLOSED
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.0K
8.OK
9.OK
10.OK
11.SOC_COM NC SOC_CLOSED
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1去连接
pc_ip的iptest_tcp_port1,PC有ACCEPT\n4.lev -K -s <sock1> -t ENABLE \n5.target1上lev
-K -s <sock1> -t GET \n6.lev -K -s <sock1> -t SET -i 30 -d 3 -c 2\n7.PC往8266发送数据\n8.8266往PC上发送数据\n9.PC往8266发送146000数据\n10.8266往PC上发送1460*100数据\n11.等待30s"
sub module: TCP
summary: STA mode, keep alive interact with TCP send
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0308
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 lev -N -t GET
- - R SSC1 RE NUMBER:\d+,OK
execution time: 0.0
expected result: 1.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: 1.lev -N -t GET
sub module: TCP
summary: AP mode, max connections number query
test environment: SSC_T1_7
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0309
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 lev -N -t SET -n 2
- - R SSC1 C +NUMBER:OK
- - SSC SSC1 lev -N -t SET -n 0
- - R SSC1 C +NUMBER:ERROR
- - SSC SSC1 lev -N -t SET -n 16
- - R SSC1 C +NUMBER:ERROR
- - SSC SSC1 lev -N -t SET -n 15
- - R SSC1 C +NUMBER:OK
- - SSC SSC1 lev -N -t SET -n 8
- - R SSC1 C +NUMBER:OK
execution time: 0.0
expected result: |-
1.OK
2.ERROR
3.ERROR
4.OK
5.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.lev -N -t SET -n 2
2.lev -N -t SET -n 0
3.lev -N -t SET -n 15
4.lev -N -t SET -n 16
5.lev -N -t SET -n 8
sub module: TCP
summary: AP mode, max connections number set
test environment: SSC_T1_7
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0310
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 lev -N -t SET -n 3
- - R SSC1 C +NUMBER:OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip_wifi> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC3
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock3>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock3> -i <pc_ip_wifi> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC4
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock4>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock4> -i <pc_ip_wifi> -p <test_tcp_port1>
- - R SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -T
- - R SSC1 C +CLOSE
- - SSC SSC1 lev -N -t SET -n 8
- - R SSC1 C +NUMBER:OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
10.ERROR
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1,本地ip target_ip
3.target1上使用步骤2创建的socket1去连接 pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT
4.lev -N -t SET -n 3
5.target1上创建TCP socket3,本地端口random_port
6.target1上使用步骤5创建的socket2去连接 pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT
7.target1上创建TCP socket3,本地端口random_port
8.target1上使用步骤7创建的socket3去连接 pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT
9.target1上创建TCP socket4,本地端口random_port
10.target1上使用步骤5创建的socket4去连接 pc_ip_wifi的iptest_tcp_port1,未连接成功
sub module: TCP
summary: AP mode, max connections fucntion verify
test environment: SSC_T1_7
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0311
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 5
- - SSC SSC1 lev -N -t SET -n 3
- - R SSC1 C +NUMBER:OK
- - SOC SOC2 SEND 146000
- - R SSC1 SL <sock1>+146000
- - SSC SSC1 soc -S -s <sock1> -l 1460 -n 100
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 146000
- - SSC SSC1 lev -N -t SET -n 8
- - R SSC1 C +NUMBER:OK
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1,本地ip target_ip
3.target1上使用步骤2创建的socket1去连接 pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT
4.PC 往8266发送数据
5.8266往PC 发送数据
6.lev -N -t SET -n 3
7.PC 往8266发送数据 146000
8.8266往PC 发送数据1460*100
9.target1上lev -N -t SET -n 8
sub module: TCP
summary: AP mode, max connections set interact with TCP connect and send
test environment: SSC_T1_7
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0312
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 lev -A -s <sock1> -t GET
- - R SSC1 RE ALLOW:\d+,ERROR
- - SSC SSC1 lev -A -s <sock1> -t SET -n 4
- - R SSC1 RE ALLOW:\d+,ERROR
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.ERROR
5.ERROR
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.target1上创建TCP socket1,本地ip target_ip
3.target1上使用步骤2创建的socket1去连接 pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT
4.lev -A -s <sock1> -t GET
5.target1上lev -A -s <sock1> -t SET -n 4
sub module: TCP
summary: AP mode, max TCP connection allowed by server test
test environment: SSC_T1_7
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0313
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - 'SSC SSC1 lev -K -s <sock1> -t ENABLE '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - 'SSC SSC1 lev -K -s <sock1> -t GET '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - SSC SSC1 lev -K -s <sock1> -t SET -i 30 -d 3 -c 2
- - R SSC1 RE KEEPALIVE:\d+,OK
- - DELAY 30
- - P SOC_COM NC SOC_CLOSED
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.SOC_COM NC SOC_CLOSED
initial condition: APM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1去连接
pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT\n4.lev -K -s <sock1> -t ENABLE \n5.target1上lev
-K -s <sock1> -t GET \n6.lev -K -s <sock1> -t SET -i 30 -d 3 -c 2\n7.等待30s"
sub module: TCP
summary: AP mode, keep alive test
test environment: SSC_T1_7
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0314
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip_wifi> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - 'SSC SSC1 lev -K -s <sock1> -t ENABLE '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - 'SSC SSC1 lev -K -s <sock1> -t GET '
- - R SSC1 RE KEEPALIVE:\d+,OK
- - SSC SSC1 lev -K -s <sock1> -t SET -i 30 -d 3 -c 2
- - R SSC1 RE KEEPALIVE:\d+,OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 5
- - SOC SOC2 SEND 146000
- - R SSC1 SL <sock1>+146000
- - SSC SSC1 soc -S -s <sock1> -l 1460 -n 100
- - P SSC1 RE SEND:\d+,OK
- P SOC2 RL 146000
- - DELAY 30
- - P SOC_COM NC SOC_CLOSED
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK,pc tcp server accept成功
4.OK
5.OK
6.OK
7.0K
8.OK
9.OK
10.OK
11.SOC_COM NC SOC_CLOSED
initial condition: APM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1去连接
pc_ip_wifi的iptest_tcp_port1,PC有ACCEPT\n4.lev -K -s <sock1> -t ENABLE \n5.target1上lev
-K -s <sock1> -t GET \n6.lev -K -s <sock1> -t SET -i 30 -d 3 -c 2\n7.PC往8266发送数据\n8.8266往PC上发送数据\n9.PC往8266发送146000数据\n10.8266往PC上发送1460*100数据\n11.等待30s"
sub module: TCP
summary: AP mode, keep alive interact with TCP send
test environment: SSC_T1_7
test point 1: basic function
test point 2: socket option test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_0401
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 sta -D
- - P SSC1 C +QAP:OK
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket1
3.target1上使用步骤2创建的socket1去连接 PC的iprandom_port
4.PC与target1创建好TCP 连接有ACCEPT
5.断开与AP 连接
6.8266往PC上发送5字节数据
sub module: TCP
summary: do TCP send after WIFI disconnected
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0402
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 sta -D
- - P SSC1 C +QAP:OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket1
3.target1上使用步骤2创建的socket1去连接 PC的iprandom_port
4.PC与target1创建好TCP 连接有ACCEPT
5.断开与AP 连接
6.关闭建立的socket1连接
sub module: TCP
summary: "close TCP socket after WIFI \ndisconnected"
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0403
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1去连接
PC的iprandom_port\n4.PC与target1创建好TCP 连接有ACCEPT\n5.修改8266的Mode为softAP mode
\n6.8266往PC上发送5字节数据"
sub module: TCP
summary: do TCP send after mode changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0404
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1去连接
PC的iprandom_port\n4.PC与target1创建好TCP 连接有ACCEPT\n5.修改8266的Mode为softAP mode
\n6.关闭建立的socket1连接"
sub module: TCP
summary: close TCP socket after mode changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0405
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - NIC <pc_nic> DISABLED
- - R PC_COM C OK
- - SSC SSC1 soc -S -s <sock1> -l 1
- - ''
- - DELAY 5400
- - P SSC1 RE CLOSED:\d+,0
execution time: 1.5
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.TCP连接断开
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket1
3.target1上使用步骤2创建的socket1去连接 PC的iprandom_port
4.PC与target1创建好TCP 连接有ACCEPT
5.PC 网卡 disable
6.target1上使用socket1发送数据等待 90 分钟
sub module: TCP
summary: do TCP send after PC NIC disabled
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0406
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - NIC <pc_nic> DISABLED
- - R PC_COM C OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1去连接
PC的iprandom_port\n4.PC与target1创建好TCP 连接有ACCEPT\n5.PC上网卡禁止掉 \n6.关闭建立的socket1连接"
sub module: TCP
summary: close TCP socket after PC NIC disabled
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0407
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -o 1 -i 192.168.111.210
- - P SSC1 C +IP:OK
- - SSC SSC1 ip -Q -o 1
- - R SSC1 C +STAIP:192.168.111.210
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
7.OK
8.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1去连接
PC的iprandom_port\n4.PC与target1创建好TCP 连接有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta
ip \n7.查询sta ip 地址是否生效\n8.8266往PC上发送5字节数据"
sub module: TCP
summary: do TCP send after IP changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0408
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -o 1 -i 192.168.111.210
- - P SSC1 C +IP:OK
- - SSC SSC1 ip -Q -o 1
- - R SSC1 C +STAIP:192.168.111.210
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
7.OK
8.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上建立TCP 监听 random_port\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1去连接
PC的iprandom_port\n4.PC与target1创建好TCP 连接有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta
ip \n7.查询sta ip 地址是否生效\n8.关闭建立的socket1连接"
sub module: TCP
summary: close TCP socket after IP changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0411
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock2> -l 5
- - P SSC1 RE SEND:\d+,ERROR
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.ERROR
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket1
3.target1上使用步骤2创建的socket1去连接 PC的iprandom_port
4.PC与target1创建好TCP 连接有ACCEPT
5.target1上创建TCP socket2
6.8266往PC socket2上发送5字节数据
7.8266往PC socket1上发送5字节数据
sub module: TCP
summary: do TCP send after socket changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0412
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - R SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 soc -T -s <sock2>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket1
3.target1上使用步骤2创建的socket1去连接 PC的iprandom_port
4.PC与target1创建好TCP 连接有ACCEPT
5.target1上创建TCP socket2
6.关闭socket1 连接
7.关闭socket2连接
sub module: TCP
summary: close TCP send after socket changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_0501
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - STRING <cap_filter> ether%20src%20%%s%20or%20ether%20dst%20%%s <target_mac>
<target_mac>
- - R PC_COM C OK
- - NIC NIC1 START <pc_nic> capture+block_ip <cap_filter>
- - R PC_COM C +NIC_START:OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - ''
- - DELAY 10
- - R SSC1 RE CONNECT:\d+,ERROR
execution time: 0.0
expected result: 2. connect failed, no exception
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. PC do not reply any IP packet on NIC
2. target try to connect to TCP server with PC NIC IP
sub module: TCP
summary: PC do not reply TCP SYN of target
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: TCP connect and disconnect abnormal case
version: v1 (2015-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0601
SDK: |-
8266_RTOS
8266_NonOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 socopt -S -s <sock1> -k Keepalive -o 1
- - R SSC1 C +SETOPTION:Keepalive,OK
- - SSC SSC1 socopt -S -s <sock1> -k Keepidle -o 20
- - R SSC1 C +SETOPTION:Keepidle,OK
- - SSC SSC1 socopt -S -s <sock1> -k Keepintvl -o 1
- - R SSC1 C +SETOPTION:Keepintvl,OK
- - SSC SSC1 socopt -S -s <sock1> -k Keepcnt -o 3
- - R SSC1 C +SETOPTION:Keepcnt,OK
- - NIC <pc_nic> DISABLED
- - R PC_COM C OK
- - DELAY 30
- - R SSC1 C CLOSE
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.OK
8.OK
9.等待30s
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上步骤3创建的socket设置so_keepalive属性
4.target1上步骤3创建的socket设置so_keepidle参数
5.target1上步骤3创建的socket设置so_keepintvl参数
6.target1上步骤3创建的socket设置so_keepcnt参数
7.target1上使用步骤7具有so_keepalive属性及参数的socket去连接 PC的iprandom_port
8.PC上网卡禁止掉
9.等待30s
sub module: TCP
summary: Test socket with so_keepalive option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0602
SDK: |-
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <random_port>
- - R SSC1 C +BIND:ERROR
execution time: 0.0
expected result: |-
1.OK
2.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建TCP socket,bind test_udp_port1
2.target1上创建TCP socket,bind test_udp_port1
sub module: TCP
summary: Test socket with so_reuseaddr option closed on TCP submodule
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0603
SDK: ESP32_IDF
Test App: SSC_OPTION
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <test_tcp_port2>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -T
- - R SSC1 C CLOSEALL
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <test_tcp_port2>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock2>
- - P SSC1 RE LISTEN:\d+,OK
- - SSC SSC1 soc -T
- - R SSC1 C CLOSEALL
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.CLOSEALL
5.OK
6.OK
7.CLOSEALL
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket,bind test_tcp_port2
3.target1上使用步骤4创建的socket去连接 PC的iprandom_port
4.关闭socket
5.target1上创建TCP socket,bind test_tcp_port2
6.target1上建立TCP 监听
7.关闭socket
sub module: TCP
summary: Test socket with so_reuseaddr option opened that close TCP connection not
react immediately on ESP32
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0604
SDK: ESP32_IDF
Test App: SSC_OPTION
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <random_port>
- - R SSC1 A <sock2>:BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建TCP socket,bind test_udp_port1
2.target1上创建TCP socket,bind test_udp_port1
sub module: TCP
summary: Test socket with so_reuseaddr option opened that build two tcp sockets
by binding same ip and port on ESP32
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0605
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
- - SSC SSC1 socopt -S -s <sock1> -k Sndtimeo -o 1
- - R SSC1 C +SETOPTION:Sndtimeo,OK
- - NIC <pc_nic> DISABLED
- - R PC_COM C OK
- - SSC SSC1 soc -S -s <sock1> -l 5000
- - P SSC1 RE SEND:\d+,OK
- - SSC SSC1 soc -S -s <sock1> -l 5000 -n 4
- - P SSC1 RE SEND:\d+,ERROR,11
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
10.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.PC与target1 创建好TCP 连接有ACCEPT
5.PC send 5 bytes to target1
6.target1 send 5 bytes to PC
7.target1上对步骤2创建的socket设置so_sndtimeo属性
8.PC上网卡禁止掉
9.target1 send 5000 bytes to PC
10.target1 send 5000 bytes to PC
sub module: TCP
summary: Test socket with so_sndtimeo option on ESP32
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0606
SDK: |-
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 socopt -S -s <sock1> -k Rcvtimeo -o 1
- - R SSC1 C +SETOPTION:Rcvtimeo,OK
- - SOC SOC2 SEND 5
- - R SSC1 RE CLOSED:\d+,11
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.CLOSED
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤3创建的socket去连接 PC的iprandom_port
4.PC与target1 创建好TCP 连接有ACCEPT
5.PC send 5 bytes to target1
6.target1上对步骤3创建的socket设置so_rcvtimeo属性
7.PC send 5 bytes to target1
sub module: TCP
summary: Test socket with so_rcvtimeo option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0607
SDK: |-
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.target1上使用步骤2创建的socket去连接 PC的iprandom_port, 获取 error code
sub module: TCP
summary: Test socket with so_error option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0608
SDK: 8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 ram -Q
- - R SSC1 A <heapsize>:\+FREEHEAP:(\d+)\r\n
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 socopt -S -s <sock1> -k Linger -o 1
- - R SSC1 C +SETOPTION:Linger,OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -T
- - P SSC1 RE CLOSE:\d+,OK
- - SSC SSC1 ram -Q
- - R SSC1 P <heapsize>
execution time: 0.0
expected result: |-
1.OK
2.查询空闲ram
3.OK
4.OK
5.OK
6.OK
7.查询空闲ram
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.查询空闲ram
3.target1上创建TCP socket
4.target1上对步骤3创建的socket设置so_linger属性
5.target1上使用步骤4具有so_linger属性的socket去连接 PC的iprandom_port
6.关闭 socket
7.查询空闲ram
sub module: TCP
summary: Test socket with so_linger option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_0609
SDK: 8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'No'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -T
- - R SSC1 C CLOSEALL
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <random_port>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock2>
- - P SSC1 RE LISTEN:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.CLOSEALL
5.OK
6.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.find ESP8266_RTOS_SDK/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0"
2.switch to ESP8266_RTOS_SDK/third_party, run "./make_lib.sh lwip" risc,then continuely run "ll ../lib"
3.switch to ESP8266_RTOS_SDK/SSC, run "./gen_misc_rtos.sh SSC", then run the test case normally
4.PC上建立TCP 监听 random_port
5.target1上创建TCP socket,bind random_port
6.target1上使用步骤5创建的socket去连接 PC的iprandom_port
7.关闭socket
8.target1上创建TCP socket,bind random_port
9.target1上建立TCP 监听
sub module: TCP
summary: Test socket with so_reuseaddr option opened that close TCP connection not
react immediately on 8266_RTOS
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_0610
SDK: 8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'No'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <est_tcp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <est_tcp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.find ESP8266_RTOS_SDK/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0"
2.switch to ESP8266_RTOS_SDK/third_party, run "./make_lib.sh lwip" risc,then continuely run "ll ../lib"
3.switch to ESP8266_RTOS_SDK/SSC, run "./gen_misc_rtos.sh SSC", then run the test case normally
4.target1上创建TCP socket,bind test_tcp_port2
5.target1上创建TCP socket,bind test_tcp_port2
sub module: TCP
summary: Test socket with so_reuseaddr option opened that build two tcp sockets
by binding same ip and port on 8266_RTOS
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0611
SDK: 8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SOC SOC1 ACCEPT SOC2
- - R SOC_COM L OK
- - SOC SOC2 SEND 5
- - R SSC1 SL <sock1>+5
- - SSC SSC1 soc -S -s <sock1> -l 5
- - P SSC1 RE SEND:\d+,OK
- - SSC SSC1 socopt -S -s <sock1> -k Sndtimeo -o 1
- - R SSC1 C +SETOPTION:Sndtimeo,OK
- - NIC <pc_nic> DISABLED
- - R PC_COM C OK
- - SSC SSC1 soc -S -s <sock1> -l 1500
- - P SSC1 RE SEND:\d+,OK
- - SSC SSC1 soc -S -s <sock1> -l 1500
- - P SSC1 RE SEND:\d+,ERROR,11
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.OK
8.OK
9.OK
10.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.PC与target1 创建好TCP 连接有ACCEPT
5.PC send 5 bytes to target1
6.target1 send 5 bytes to PC
7.target1上对步骤2创建的socket设置so_sndtimeo属性
8.PC上网卡禁止掉
9.target1 send 1500 bytes to PC
10.target1 send 1500 bytes to PC
sub module: TCP
summary: Test socket with so_sndtimeo option on 8266_RTOS
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0612
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip>
- - R SOC_COM L OK
- - SOC SOC2 LISTEN <test_tcp_port2> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 socopt -S -s <sock1> -k Maxconnect -o 1
- - R SSC1 C +SETOPTION:Maxconnect,OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <test_tcp_port1>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock2> -i <pc_ip> -p <test_tcp_port2>
- - P SSC1 RE CONNECT:\d+,ERROR
- - SSC SSC1 soc -T
- - R SSC1 C CLOSE
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.ERROR
8.CLOSE
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 test_tcp_port1
2.PC上建立TCP 监听 test_tcp_port2
3.target1上创建TCP socket
4.target1上对步骤3创建的socket设置 Maxconnect属性
5.target1上使用步骤4具有Maxconnect属性的socket去连接 PC的iptest_tcp_port1
6.target1上创建TCP socket
7.target1上使用步骤6创建的socket去连接 PC的iptest_tcp_port2
8.关闭socket
sub module: TCP
summary: Test socket with Maxconnect option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0613
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <random_port>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock1>
- - P SSC1 RE LISTEN:\d+,OK
- - SSC SSC1 socopt -S -s <sock1> -k MaxConnectNum -o 1
- - R SSC1 C +SETOPTION:MaxConnectNum,OK
- - SOC SOC1 CONNECT <random_port> <target_ip>
- - R SSC1 A <sock2>:ACCEPT:(\d+),\d+,.+,\d+
- - SOC SOC2 CONNECT <random_port> <target_ip>
- - P SOC_COM C ERROR
- - SSC SSC1 soc -T
- - R SSC1 C CLOSE
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.PC TCP client accept
5.ERROR
6.CLOSE
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建TCP socketbind random_port
2.target1上使用步骤2创建的socket1,建立TCP 监听
3.target1上对步骤2创建的socket设置 MaxConnectNum属性
4.PC TCP 连接到target1 <random_port>,<target_ip>
5.PC TCP 连接到target1 <random_port>,<target_ip>
6.关闭socket
sub module: TCP
summary: Test socket with MaxConnectNum option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0614
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <test_tcp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 socopt -S -s <sock1> -k Registtime -o 20
- - R SSC1 C +SETOPTION:Registtime,OK
- - SSC SSC1 soc -L -s <sock1>
- - P SSC1 RE LISTEN:\d+,OK
- - SOC SOC1 CONNECT <test_tcp_port1> <target_ip>
- - R SSC1 A <sock1>:ACCEPT:(\d+),\d+,.+,\d+
- - DELAY 30
- - P SOC_COM NC SOC_CLOSED
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.PC TCP client accept
5.等待30s
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建TCP socketbind test_tcp_port1
2.target1上对步骤2创建的socket设置 Registtime 属性
3.target1上使用步骤3具有Registtime属性的socket1,建立TCP 监听
4.PC TCP 连接到target1 <test_tcp_port1>, <target_ip>
5.等待30s
sub module: TCP
summary: Test socket with Registtime option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0615
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 socopt -S -s <sock1> -k Abort
- - R SSC1 C CLOSED
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.CLOSED
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.target1上对步骤2创建的socket设置 Abort 属性
sub module: TCP
summary: Test socket with Abort option
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0616
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 LISTEN <random_port> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <test_tcp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -C -s <sock1> -i <pc_ip> -p <random_port>
- - P SSC1 RE CONNECT:\d+,OK
- - SSC SSC1 soc -T
- - R SSC1 C CLOSEALL
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <test_tcp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -L -s <sock2>
- - P SSC1 RE LISTEN:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.CLOSEALL
5.OK
6.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上建立TCP 监听 random_port
2.target1上创建TCP socket,bind test_tcp_port1
3.target1上使用步骤2创建的socket去连接 PC的iprandom_port
4.关闭socket
5.target1上创建TCP socket,bind test_tcp_port1
6.target1上建立TCP 监听
sub module: TCP
summary: Test socket with so_reuseaddr option opened that close TCP connection not
react immediately on 8266_NonOS
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_0617
SDK: 8266_NonOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <test_tcp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t TCP -i <target_ip> -p <test_tcp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建TCP socket,bind test_tcp_port1
2.target1上创建TCP socket,bind test_tcp_port1
sub module: TCP
summary: Test socket with so_reuseaddr option opened that build two tcp sockets
by binding same ip and port on 8266_NonOS
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5001
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC, SSC_NonBlocking
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPConnection
- - max_connection = 5
- - dummy
- - execute_time = 300
- - ''
- - connect_method = ["C_01", "C_02", "C_05", "C_07"]
- - ''
- - disconnect_method = ["D_01", "D_03", "D_05", "D_06"]
- - ''
- - pc_ip = "pc_ip"
- - ''
- - target_ip = "target_ip"
- - ''
execution time: 5.0
expected result: 1. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. random choose connect method to do connect, random choose a method to close
Loop executing step 1
sub module: TCP
summary: test possible TCP connect/disconnect method
test environment: SSC_T1_6
test point 1: function + stress
test point 2: TCP connect and disconnect test
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5101
SDK: ESP32_IDF
Test App: SSC, SSC_NonBlocking, SSC_PSRAM
auto test: 'Yes'
category: Stable
cmd set:
- TCPStress/TCPAPNSTA
- - send_len = 1460
- - dummy
- - test_time = 720
- - ''
- - server_port = "<random_port>"
- - ''
- - server_echo = True
- - ''
- - sta_number = 4
- - ''
- - send_delay = 50
- - ''
- - ap_ip = "<target_ap_ip>"
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. all TCP connection not disconnected
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. all sta connect to softap
2. create tcp server on softap
3. all sta connect to softap tcp server
4. do bi-direction send on all tcp connections
sub module: TCP
summary: 1 AP 4 STA TCP stable test
test environment: SSC_T5_1
test point 1: stable
test point 2: TCP stable test
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5101
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC, SSC_NonBlocking
auto test: 'Yes'
category: Stable
cmd set:
- TCPStress/TCPAPNSTA
- - send_len = 1460
- - dummy
- - test_time = 720
- - ''
- - server_port = "<random_port>"
- - ''
- - server_echo = True
- - ''
- - sta_number = 4
- - ''
- - send_delay = 50
- - ''
- - ap_ip = "<target_ap_ip>"
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. all TCP connection not disconnected
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. all sta connect to softap
2. create tcp server on softap
3. all sta connect to softap tcp server
4. do bi-direction send on all tcp connections
sub module: TCP
summary: 1 AP 4 STA TCP stable test
test environment: SSC_T5_1
test point 1: stable
test point 2: TCP stable test
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stable
cmd set:
- TCPStress/TCPRandomSend
- - delay_config = [0, 0.01, 0.1, 0.5, 1]
- - dummy
- - send_count = 1000
- - ''
- - test_time = 300
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. create TCP connection
2. PC send random length data to target
sub module: TCP
summary: send random length segment to target
test environment: SSC_T1_6
test point 1: stable
test point 2: TCP stable test
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5103
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stable
cmd set:
- TCPStress/TCPSoftAPSTASendRecv
- - send_len = 1460
- - dummy
- - test_time = 720
- - ''
- - test_count = 0xFFFFFF
- - ''
- - server_port = "<random_port>"
- - ''
- - server_port_2 = "<test_tcp_port2>"
- - ''
- - server_echo = True
- - ''
- - sta_number = 3
- - ''
- - send_delay = 50
- - ''
- - pass_standard = (4*3600)
- - ''
- - ap_ip = "<target_ap_ip>"
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. verify reciveid data on target and PC succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. create TCP connection
2. send specified pattern on both direction
sub module: TCP
summary: TCP SoftSTA send/recv stress test
test environment: SSC_T5_1
test point 1: stable
test point 2: TCP stable test
version: v2 (2016-11-15)
- CI ready: 'No'
ID: TCPIP_TCP_5104
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPMultiSTASendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - server_echo = True
- - ''
- - sta_number = 5
- - ''
- - send_delay = 500
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 5 sta connect to softap
2. create TCP socket on all sta
3. all sta do TCP send/recv
sub module: TCP
summary: 1 SoftAP 5 STA, create TCP server on one STA, create TCP client on other
STA, do TCP send/recv
test environment: SSC_T6_1
test point 1: stress
test point 2: TCP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_5105
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPSTAMuitiSockSendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - server_echo = True
- - ''
- - sta_number = 2
- - ''
- - conn_number = 6
- - ''
- - send_delay = 500
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 2 sta connect to softap
2. create multi tcp socket on all sta
3. all sta do tcp send/recv
sub module: TCP
summary: 1 SoftAP 2 STA, create multi TCP socket between STA, do TCP send/recv
test environment: SSC_T3_1
test point 1: stress
test point 2: TCP stress test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5106
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stable
cmd set:
- TCPStress/TCPRandomSend
- - delay_config = [0, 0.01, 0.1, 0.5, 1]
- - dummy
- - send_count = 1000
- - ''
- - test_time = 300
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. create TCP connection
2. PC send random length data to target
sub module: TCP
summary: send random length segment to target for Ethernet
test environment: SSC_T1_Ethernet
test point 1: stable
test point 2: TCP stable test
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPSendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - duplex = True
- - ''
- - conn_num = 5
- - ''
- - send_delay = 20
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. all TCP connection not disconnected
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple tcp connection
3. do send/recv on all tcp connections
sub module: TCP
summary: TCP send/recv stress test
test environment: SSC_T2_5
test point 1: stress
test point 2: TCP stress test
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5202
SDK: ESP32_IDF
Test App: SSC, SSC_NonBlocking, SSC_PSRAM
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPDataValidation
- - test_time = 1440
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = True
- - ''
- - conn_num = 1
- - ''
- - send_len = 1024
- - ''
execution time: 24.0
expected result: |-
1. succeed
2. verify reciveid data on target and PC succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. create TCP connection
2. send specified pattern on both direction
sub module: TCP
summary: TCP send/recv data validation
test environment: SSC_T1_6
test point 1: stress
test point 2: TCP stress test
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5202
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC, SSC_NonBlocking
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPDataValidation
- - test_time = 1440
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = True
- - ''
- - conn_num = 1
- - ''
- - send_len = 1024
- - ''
execution time: 24.0
expected result: |-
1. succeed
2. verify reciveid data on target and PC succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. create TCP connection
2. send specified pattern on both direction
sub module: TCP
summary: TCP send/recv data validation
test environment: SSC_T1_6
test point 1: stress
test point 2: TCP stress test
version: v2 (2016-11-15)
- CI ready: 'No'
ID: TCPIP_TCP_5203
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPRandomSend
- - delay_config = [0, 0.01, 0.1, 0.5, 1]
- - dummy
- - send_count = 1000
- - ''
- - test_time = 300
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. 不断开
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. ESP8089在同一信道进行iperf测试
2. create TCP connection
3. PC send random length data to target
sub module: TCP
summary: TCP 信道竞争测试
test environment: SSC_T1_8089
test point 1: stress
test point 2: TCP stress test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5204
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC_Ethernet
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPDataValidation
- - test_time = 1440
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = True
- - ''
- - conn_num = 1
- - ''
- - send_len = 1024
- - ''
execution time: 24.0
expected result: |-
1. succeed
2. verify reciveid data on target and PC succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. create TCP connection
2. send specified pattern on both direction
sub module: TCP
summary: TCP send/recv data validation for Ethernet
test environment: SSC_T1_Ethernet
test point 1: stress
test point 2: TCP stress test
version: v2 (2016-11-15)
- CI ready: 'No'
ID: TCPIP_TCP_5301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC, SSC_NonBlocking
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. config attenuator (0-59)
2. scan AP to get AP RSSI
3. create TCP connection and send data for several seconds
Loop step 1 - 3
sub module: TCP
summary: TCP throughput Tx in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: TCP throughput
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_5302
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC, SSC_NonBlocking
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. config attenuator (0-59)
2. scan AP to get AP RSSI
3. create TCP connection and recv data for several seconds
Loop step 1 - 3
sub module: TCP
summary: TCP throughput Rx in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: TCP throughput
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_5401
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC_Ethernet
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/EthTCPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
- - test_count = 5
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket and send packet to PC for several secends
Loop for step 1-2
sub module: TCP
summary: TCP throughput Tx for Ethernet
test environment: SSC_T1_Ethernet
test point 1: stress
test point 2: TCP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_5402
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC_Ethernet
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/EthTCPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
- - test_count = 5
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket and PC send packet to DUT for several secends
Loop for step 1-2
sub module: TCP
summary: TCP throughput Rx for Ethernet
test environment: SSC_T1_Ethernet
test point 1: stress
test point 2: TCP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_5501
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC_Ethernet
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/EthTCPSocketTest
- - send_len = 1460
- - dummy
- - test_count = 1000
- - ''
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. PC bind socket and send packet to DUT for several secends
3. DUT close eth randomly
Loop for step 1-3
sub module: TCP
summary: Eth random close while sending packets
test environment: SSC_T1_Ethernet
test point 1: stress
test point 2: TCP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_5601
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPSoftAPSTAThroughput
- - send_len = 1460
- - dummy
- - sta_rx_enable = False
- - ''
- - sta_tx_enable = True
- - ''
- - measure_period = 15
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. STA connect softAP
2. create TCP socket connect
3. send TCP packet
4. calculate the troughput
sub module: TCP
summary: STA TCP throughput Tx while connected with softAP
test environment: SSC_T2_ShieldBox2
test point 1: Performance test
test point 2: TCP throughput
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_TCP_5602
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPSoftAPSTAThroughput
- - send_len = 1460
- - dummy
- - sta_rx_enable = True
- - ''
- - sta_tx_enable = False
- - ''
- - measure_period = 15
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. STA connect softAP
2. create TCP socket connect
3. send TCP packet
4. calculate the troughput
sub module: TCP
summary: STA TCP throughput Rx while connected with softAP
test environment: SSC_T2_ShieldBox2
test point 1: Performance test
test point 2: TCP throughput
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_TCP_5701
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC_Ethernet
auto test: 'Yes'
category: Stress
cmd set:
- StableTest/EthGetIP
- - test_count = 5000
- [dummy]
comment: ''
execution time: 5.0
expected result: '1. succeed
2. succeed
3. succeed
4. succeed'
initial condition: None
initial condition description (auto): none
level: Integration
module: TCPIP
steps: |-
1. reboot
2. open eth
3. delay 10s
4. ip query
sub module: TCP
summary: Eth get ip test
test environment: SSC_T1_Ethernet
test point 1: stress
test point 2: TCP stress test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5801
SDK: 'ESP32_IDF'
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPSendRecvIPv6
- - send_len = 1460
- [dummy]
- - test_time = 300
- ['']
- - duplex = True
- ['']
- - conn_num = 5
- ['']
- - send_delay = 20
- ['']
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. all TCP connection not disconnected
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple tcp connection
3. do send/recv on all tcp connections
sub module: TCP
summary: TCP send/recv stress test with TCPSendRecvIPv6
test environment: SSC_T2_5
test point 1: stress
test point 2: TCP stress test(IPv6)
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5802
SDK: 'ESP32_IDF'
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPSoftAPSTASendRecvIPv6
- - send_len = 1460
- [dummy]
- - test_time = 300
- ['']
- - conn_num = 5
- ['']
- - duplex = True
- ['']
- - send_delay = 20
- ['']
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. all TCP connection not disconnected
initial condition: T3_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple tcp connection
3. do send/recv on all tcp connections
sub module: TCP
summary: TCP send/recv stress test with TCPSoftAPSTASendRecvIPv6
test environment: SSC_T3_1
test point 1: stress
test point 2: TCP stress test(IPv6)
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_TCP_5803
SDK: 'ESP32_IDF'
Test App: SSC, SSC_NonBlocking
auto test: 'Yes'
category: Stress
cmd set:
- TCPStress/TCPDataValidationIPv6
- - test_time = 300
- [dummy]
- - tx_enable = True
- ['']
- - rx_enable = True
- ['']
- - conn_num = 5
- ['']
- - send_len = 1024
- ['']
execution time: 24.0
expected result: |-
1. succeed
2. verify reciveid data on target and PC succeed
initial condition: STAAP2
level: Integration
module: TCPIP
steps: |-
1. create TCP connection
2. send specified pattern on both direction
sub module: TCP
summary: TCP send/recv data validation with TCPDataValidationIPv6
test environment: SSC_T1_6
test point 1: stress
test point 2: TCP stress test(IPv6)
version: v2 (2016-11-15)
- CI ready: 'No'
ID: TCPIP_TCP_6001
SDK: ESP32_IDF, 8266_NonOS, 8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Stable
cmd set:
- StableTest/TCPStable
- - send_delay = 5
- - ''
- - timeout = 20
- - ''
- - test_time = 7*24*60
- - ''
- - conn_num = 1
- - ''
- - send_len = 100
- - ''
execution time: 168
expected result: 1. succeed 2. DUT1 receive PC echo in timeout 3. succeed 4. succeed
initial condition: STAO2
level: Integration
module: TCPIP
steps: 1. create TCP connection 2. DUT send data to PC, PC do echo 3. delay for
send_delay 4. repeat step 2-3
sub module: TCP
summary: TCP send receive delay stable test
test environment: SSC_T1_6
test point 1: Stable
test point 2: TCP send receive stable test
version: v1 (2017-04-21)
- CI ready: 'No'
ID: TCPIP_TCP_9901
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- TCPStress/TCPThroughputCompatibility
- - send_len = 1460
- - dummy
- - test_times = 10
- - ''
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create TCP connection and send data for several seconds
3. calculate the throughput
Loop step 1 - 3
sub module: TCP
summary: TCP throughput Tx Compatibility test in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: TCP throughput Compatibility test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_TCP_9902
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- TCPStress/TCPThroughputCompatibility
- - send_len = 1460
- - dummy
- - test_times = 10
- - ''
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create TCP connection and send data for several seconds
3. calculate the throughput
Loop step 1 - 3
sub module: TCP
summary: TCP throughput Rx Compatibility test in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: TCP throughput Compatibility test
version: v1 (2016-8-15)