esp-idf/components/openthread/private_include/openthread-core-esp32x-mtd-config.h

/*
 * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#pragma once

#include "sdkconfig.h"

/**
 * @def OPENTHREAD_CONFIG_PLATFORM_INFO
 *
 * The platform-specific string to insert into the OpenThread version string.
 *
 */
#define OPENTHREAD_CONFIG_PLATFORM_INFO CONFIG_IDF_TARGET

/**
 * @def OPENTHREAD_CONFIG_PLATFORM_ASSERT_MANAGEMENT
 *
 * The assert is managed by platform defined logic when this flag is set.
 *
 */
#define OPENTHREAD_CONFIG_PLATFORM_ASSERT_MANAGEMENT 1

/**
 * @def OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE
 *
 * Define to 1 to enable otPlatFlash* APIs to support non-volatile storage.
 *
 * When defined to 1, the platform MUST implement the otPlatFlash* APIs instead of the otPlatSettings* APIs.
 *
 */
#define OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE 0

/**
 * @def OPENTHREAD_CONFIG_LOG_OUTPUT
 *
 * The ESP-IDF platform provides an otPlatLog() function.
 */
#define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED

/**
 * @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
 *
 * Configuration option to enable dynamic log level control.
 *
 */
#define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC

/**
 * @def OPENTHREAD_CONFIG_LOG_LEVEL
 *
 * The log level (used at compile time). If `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE` is set, this defines the most
 * verbose log level possible. See `OPENTHREAD_CONFIG_LOG_LEVEL_INIT` to set the initial log level.
 *
 */
#if OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
#define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_DEBG
#else
#define OPENTHREAD_CONFIG_LOG_LEVEL CONFIG_OPENTHREAD_LOG_LEVEL
#endif

#define OPENTHREAD_CONFIG_LOG_CLI 1
#define OPENTHREAD_CONFIG_LOG_PKT_DUMP 1
#define OPENTHREAD_CONFIG_LOG_PLATFORM 1

/**
 * @def OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS
 *
 * The number of message buffers in buffer pool
 */
#define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS CONFIG_OPENTHREAD_NUM_MESSAGE_BUFFERS

/**
 * @def OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE
 *
 * Enable the external heap.
 *
 */
#ifndef OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE
#define OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE 1
#endif

/**
 * @def OPENTHREAD_CONFIG_TCP_ENABLE
 *
 * Define to 0 to disable TCP
 *
 */
#ifndef OPENTHREAD_CONFIG_TCP_ENABLE
#define OPENTHREAD_CONFIG_TCP_ENABLE 0
#endif

/**
 * @def OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE
 *
 * Define to 1 to enable Thread Test Harness reference device support.
 *
 */
#define OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_NCP_SPI_ENABLE
 *
 * Define to 1 to enable NCP SPI support.
 *
 */
#define OPENTHREAD_CONFIG_NCP_SPI_ENABLE 0

/**
 * @def OPENTHREAD_ENABLE_NCP_SPINEL_ENCRYPTER
 *
 * Define to 1 to enable NCP Spinel Encrypter.
 *
 */
#define OPENTHREAD_ENABLE_NCP_SPINEL_ENCRYPTER 0

/**
 * @def OPENTHREAD_CONFIG_NCP_HDLC_ENABLE
 *
 * Define to 1 to enable NCP HDLC support.
 *
 */
#define OPENTHREAD_CONFIG_NCP_HDLC_ENABLE 1

/**
 * @def PACKAGE_NAME
 *
 * Define to the full name of this package.
 *
 */
#define PACKAGE_NAME "openthread-esp32"

/**
 * @def PACKAGE_STRING
 *
 * Define to the full name and version of this package.
 *
 */
#define PACKAGE_STRING (PACKAGE_NAME " - " PACKAGE_VERSION)

/**
 * @def OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS
 *
 * Define as 1 to enable bultin-mbedtls.
 *
 * Note that the OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS determines whether to use bultin-mbedtls as well as
 * whether to manage mbedTLS internally, such as memory allocation and debug.
 *
 */
#define OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS 0

/**
 * @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE
 *
 * Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread.
 *
 */
#define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS
 *
 * The maximum number of state-changed callback handlers (set using `otSetStateChangedCallback()`).
 *
 */
#define OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS 3

/**
 * @def OPENTHREAD_CONFIG_PLATFORM_RADIO_SPINEL_RX_FRAME_BUFFER_SIZE
 *
 * Specifies the rx frame buffer size used by `SpinelInterface` in RCP host code. This is applicable/used when
 * `RadioSpinel` platform is used.
 *
 */
#define OPENTHREAD_CONFIG_PLATFORM_RADIO_SPINEL_RX_FRAME_BUFFER_SIZE 1024

/**
 * @def OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE
 *
 * Define as 1 to enable microsecond timer.
 *
 */
#define OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_PING_SENDER_ENABLE
 *
 * Define to 1 to enable ping sender module.
 *
 * Ping sender module implements sending ICMPv6 Echo Request messages and processing ICMPv6 Echo Reply messages.
 *
 */
#define OPENTHREAD_CONFIG_PING_SENDER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN
 *
 * The max length of the OpenThread dtls content buffer.
 *
 */
#ifndef OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN
#define OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN 768
#endif

/**
 * The configurable definitions via Kconfig
 */
#if CONFIG_OPENTHREAD_COMMISSIONER
#define OPENTHREAD_CONFIG_COMMISSIONER_ENABLE 0
#endif

#if CONFIG_OPENTHREAD_MACFILTER_ENABLE
#define OPENTHREAD_CONFIG_MAC_FILTER_ENABLE 1
#endif // CONFIG_OPENTHREAD_MACFILTER_ENABLE

#if CONFIG_OPENTHREAD_JOINER
#define OPENTHREAD_CONFIG_JOINER_ENABLE 1
#endif

#if CONFIG_OPENTHREAD_DIAG
#define OPENTHREAD_CONFIG_DIAG_ENABLE 1
#endif

#if CONFIG_OPENTHREAD_SRP_CLIENT
#ifndef OPENTHREAD_CONFIG_ECDSA_ENABLE
#define OPENTHREAD_CONFIG_ECDSA_ENABLE 1
#endif

#ifndef OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE
#define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 1
#endif

/**
 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES
 *
 * Specifies number of service entries in the SRP client service pool.
 *
 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled.
 *
 */
#define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES CONFIG_OPENTHREAD_SRP_CLIENT_MAX_SERVICES

#endif

/**
 * @def OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE
 *
 * Define to 1 to enable DNS Client support.
 *
 */
#define OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE CONFIG_OPENTHREAD_DNS_CLIENT

/**
 * @def OPENTHREAD_CONFIG_TIME_SYNC_ENABLE
 *
 * Define as 1 to enable the time synchronization service feature.
 *
 */
#if CONFIG_OPENTHREAD_TIME_SYNC
#define OPENTHREAD_CONFIG_TIME_SYNC_ENABLE 1
#endif

/**
 * @def OPENTHREAD_CONFIG_RADIO_STATS_ENABLE
 *
 * Set to 1 to enable support for Radio Statistics. Note that this option only works for OPENTHREAD_FTD and
 * OPENTHREAD_MTD.
 *
 */
#if CONFIG_OPENTHREAD_RADIO_STATS_ENABLE
#define OPENTHREAD_CONFIG_RADIO_STATS_ENABLE 1
#endif

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT
 *
 * The timeout value (in seconds) waiting for a address notification response after sending an address query.
 *
 */
#ifndef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT CONFIG_OPENTHREAD_ADDRESS_QUERY_TIMEOUT
#endif

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY
 *
 * Initial retry delay for address query (in seconds).
 *
 */
#ifndef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY CONFIG_OPENTHREAD_ADDRESS_QUERY_RETRY_DELAY
#endif

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY
 *
 * Maximum retry delay for address query (in seconds).
 *
 */
#ifndef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY CONFIG_OPENTHREAD_ADDRESS_QUERY_MAX_RETRY_DELAY
#endif

/**
 * @def OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT
 *
 * The maximum number of backoffs the CSMA-CA algorithm will attempt before declaring a channel access failure.
 *
 * Equivalent to macMaxCSMABackoffs in IEEE 802.15.4-2006, default value is 4.
 *
 */
#ifndef OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT
#define OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT CONFIG_OPENTHREAD_MAC_MAX_CSMA_BACKOFFS_DIRECT
#endif

#define OPENTHREAD_MTD 1