mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
b354c11db7
Linker script generator produces build/esp32/esp32.common.ld from components/esp32/ld/esp32.common.ld.in This works fine until IDF is downgraded to V3.1 which uses components/esp32/ld/esp32.common.ld and doesn't track build/esp32/esp32.common.ld at all. At this point, the linker runs in the build/esp32 directory and "-T esp32.common.ld" picks up the linker script generated .ld file, which causes mis-builds. As reported on forums: https://esp32.com/viewtopic.php?f=13&t=9684&p=40105
415 lines
16 KiB
Bash
Executable File
415 lines
16 KiB
Bash
Executable File
#!/bin/bash
|
|
#
|
|
# Test the build system for basic consistency
|
|
#
|
|
# A bash script that tests some likely make failure scenarios in a row
|
|
#
|
|
# Assumes PWD is an out-of-tree build directory, and will create a
|
|
# subdirectory inside it to run build tests in.
|
|
#
|
|
# Environment variables:
|
|
# IDF_PATH - must be set
|
|
# ESP_IDF_TEMPLATE_GIT - Can override git clone source for template app. Otherwise github.
|
|
# NOCLEANUP - Set to '1' if you want the script to leave its temporary directory when done, for post-mortem.
|
|
#
|
|
#
|
|
# Internals:
|
|
# * The tests run in sequence & the system keeps track of all failures to print at the end.
|
|
# * BUILD directory is set to default BUILD_DIR_BASE
|
|
# * The "print_status" function both prints a status line to the log and keeps track of which test is running.
|
|
# * Calling the "failure" function prints a failure message to the log and also adds to the list of failures to print at the end.
|
|
# * The function "assert_built" tests for a file relative to the BUILD directory.
|
|
# * The function "take_build_snapshot" can be paired with the functions "assert_rebuilt" and "assert_not_rebuilt" to compare file timestamps and verify if they were rebuilt or not since the snapshot was taken.
|
|
#
|
|
# To add a new test case, add it to the end of the run_tests function. Note that not all test cases do comprehensive cleanup
|
|
# (although very invasive ones like appending CRLFs to all files take a copy of the esp-idf tree), however the clean_build_dir
|
|
# function can be used to force-delete all files from the build output directory.
|
|
|
|
# Set up some variables
|
|
#
|
|
# override ESP_IDF_TEMPLATE_GIT to point to a local dir if you're testing and want fast iterations
|
|
[ -z ${ESP_IDF_TEMPLATE_GIT} ] && ESP_IDF_TEMPLATE_GIT=https://github.com/espressif/esp-idf-template.git
|
|
|
|
# uncomment next line to produce a lot more debug output
|
|
#export V=1
|
|
|
|
function run_tests()
|
|
{
|
|
FAILURES=
|
|
STATUS="Starting"
|
|
print_status "Checking prerequisites"
|
|
[ -z ${IDF_PATH} ] && echo "IDF_PATH is not set. Need path to esp-idf installation." && exit 2
|
|
|
|
print_status "Cloning template from ${ESP_IDF_TEMPLATE_GIT}..."
|
|
git clone ${ESP_IDF_TEMPLATE_GIT} template
|
|
cd template
|
|
if [ -z $CHECKOUT_REF_SCRIPT ]; then
|
|
git checkout ${CI_BUILD_REF_NAME} || echo "Using esp-idf-template default branch..."
|
|
else
|
|
$CHECKOUT_REF_SCRIPT esp-idf-template
|
|
fi
|
|
|
|
print_status "Updating template config..."
|
|
make defconfig || exit $?
|
|
|
|
print_status "Try to clean fresh directory..."
|
|
MAKEFLAGS= make clean || exit $?
|
|
|
|
BOOTLOADER_BINS="bootloader/bootloader.elf bootloader/bootloader.bin"
|
|
APP_BINS="app-template.elf app-template.bin"
|
|
|
|
print_status "Initial clean build"
|
|
# if make fails here, everything fails
|
|
make || exit $?
|
|
# check all the expected build artifacts from the clean build
|
|
assert_built ${APP_BINS} ${BOOTLOADER_BINS} partitions_singleapp.bin
|
|
[ -f ${BUILD}/partition*.bin ] || failure "A partition table should have been built"
|
|
|
|
print_status "Updating component source file rebuilds component"
|
|
# touch a file & do a build
|
|
take_build_snapshot
|
|
touch ${IDF_PATH}/components/esp32/cpu_start.c
|
|
make || failure "Failed to partial build"
|
|
assert_rebuilt ${APP_BINS} esp32/libesp32.a esp32/cpu_start.o
|
|
assert_not_rebuilt lwip/liblwip.a freertos/libfreertos.a ${BOOTLOADER_BINS} partitions_singleapp.bin
|
|
|
|
print_status "Bootloader source file rebuilds bootloader"
|
|
take_build_snapshot
|
|
touch ${IDF_PATH}/components/bootloader/subproject/main/bootloader_start.c
|
|
make bootloader || failure "Failed to partial build bootloader"
|
|
assert_rebuilt ${BOOTLOADER_BINS} bootloader/main/bootloader_start.o
|
|
assert_not_rebuilt ${APP_BINS} partitions_singleapp.bin
|
|
|
|
print_status "Partition CSV file rebuilds partitions"
|
|
take_build_snapshot
|
|
touch ${IDF_PATH}/components/partition_table/partitions_singleapp.csv
|
|
make partition_table || failure "Failed to build partition table"
|
|
assert_rebuilt partitions_singleapp.bin
|
|
assert_not_rebuilt app-template.bin app-template.elf ${BOOTLOADER_BINS}
|
|
|
|
print_status "Partial build doesn't compile anything by default"
|
|
take_build_snapshot
|
|
# verify no build files are refreshed by a partial make
|
|
ALL_BUILD_FILES=$(find ${BUILD} -type f | sed "s@${BUILD}/@@")
|
|
make || failure "Partial build failed"
|
|
assert_not_rebuilt ${ALL_BUILD_FILES}
|
|
|
|
print_status "Cleaning should remove all files from build"
|
|
make clean || failure "Failed to make clean"
|
|
ALL_BUILD_FILES=$(find ${BUILD} -type f)
|
|
if [ -n "${ALL_BUILD_FILES}" ]; then
|
|
failure "Files weren't cleaned: ${ALL_BUILD_FILES}"
|
|
fi
|
|
|
|
print_status "Bootloader build shouldn't leave build output anywhere else"
|
|
clean_build_dir
|
|
make bootloader
|
|
# find wizardry: find any file not named sdkconfig.h that
|
|
# isn't in the "bootloader" or "config" directories
|
|
find ${BUILD} -type d \( -name bootloader -o -name config \) -prune , -type f ! -name sdkconfig.h || failure "Bootloader built files outside the bootloader or config directories"
|
|
|
|
print_status "Moving BUILD_DIR_BASE out of tree"
|
|
clean_build_dir
|
|
OUTOFTREE_BUILD=${TESTDIR}/alt_build
|
|
make BUILD_DIR_BASE=${OUTOFTREE_BUILD} || failure "Failed to build with BUILD_DIR_BASE overriden"
|
|
NEW_BUILD_FILES=$(find ${OUTOFREE_BUILD} -type f)
|
|
if [ -z "${NEW_BUILD_FILES}" ]; then
|
|
failure "No files found in new build directory!"
|
|
fi
|
|
DEFAULT_BUILD_FILES=$(find ${BUILD} -mindepth 1)
|
|
if [ -n "${DEFAULT_BUILD_FILES}" ]; then
|
|
failure "Some files were incorrectly put into the default build directory: ${DEFAULT_BUILD_FILES}"
|
|
fi
|
|
|
|
print_status "BUILD_DIR_BASE inside default build directory"
|
|
clean_build_dir
|
|
make BUILD_DIR_BASE=build/subdirectory || failure "Failed to build with BUILD_DIR_BASE as subdir"
|
|
NEW_BUILD_FILES=$(find ${BUILD}/subdirectory -type f)
|
|
if [ -z "${NEW_BUILD_FILES}" ]; then
|
|
failure "No files found in new build directory!"
|
|
fi
|
|
|
|
print_status "Parallel builds should work OK"
|
|
clean_build_dir
|
|
(make -j5 2>&1 | tee ${TESTDIR}/parallel_build.log) || failure "Failed to build in parallel"
|
|
if grep -q "warning: jobserver unavailable" ${TESTDIR}/parallel_build.log; then
|
|
failure "Parallel build prints 'warning: jobserver unavailable' errors"
|
|
fi
|
|
|
|
print_status "Can still clean build if all text files are CRLFs"
|
|
make clean || failure "Unexpected failure to make clean"
|
|
find . -path .git -prune -exec unix2dos {} \; # CRLFify template dir
|
|
# make a copy of esp-idf and CRLFify it
|
|
CRLF_ESPIDF=${TESTDIR}/esp-idf-crlf
|
|
mkdir -p ${CRLF_ESPIDF}
|
|
cp -r ${IDF_PATH}/* ${CRLF_ESPIDF}
|
|
# don't CRLFify executable files, as Linux will fail to execute them
|
|
find ${CRLF_ESPIDF} -name .git -prune -name build -prune -type f ! -perm 755 -exec unix2dos {} \;
|
|
make IDF_PATH=${CRLF_ESPIDF} || failure "Failed to build with CRLFs in source"
|
|
# do the same checks we do for the clean build
|
|
assert_built ${APP_BINS} ${BOOTLOADER_BINS} partitions_singleapp.bin
|
|
[ -f ${BUILD}/partition*.bin ] || failure "A partition table should have been built in CRLF mode"
|
|
|
|
print_status "Touching rom ld file should re-link app and bootloader"
|
|
make
|
|
take_build_snapshot
|
|
touch ${IDF_PATH}/components/esp32/ld/esp32.rom.ld
|
|
make
|
|
assert_rebuilt ${APP_BINS} ${BOOTLOADER_BINS}
|
|
|
|
print_status "Touching app-only template ld file should only re-link app"
|
|
take_build_snapshot
|
|
touch ${IDF_PATH}/components/esp32/ld/esp32.project.ld.in
|
|
make
|
|
assert_rebuilt ${APP_BINS}
|
|
assert_not_rebuilt ${BOOTLOADER_BINS}
|
|
|
|
print_status "Touching a linker fragment file should trigger re-link of app" # only app linker script is generated by tool for now
|
|
take_build_snapshot
|
|
touch ${IDF_PATH}/components/esp32/linker.lf
|
|
make
|
|
assert_rebuilt ${APP_BINS}
|
|
assert_not_rebuilt ${BOOTLOADER_BINS}
|
|
|
|
print_status "sdkconfig update triggers full recompile"
|
|
make
|
|
take_build_snapshot
|
|
touch sdkconfig
|
|
make
|
|
# check the component_project_vars.mk file was rebuilt
|
|
assert_rebuilt esp32/component_project_vars.mk
|
|
# pick one each of .c, .cpp, .S that #includes sdkconfig.h
|
|
# and therefore should rebuild
|
|
assert_rebuilt newlib/syscall_table.o
|
|
assert_rebuilt nvs_flash/src/nvs_api.o
|
|
assert_rebuilt freertos/xtensa_vectors.o
|
|
|
|
print_status "Updating project Makefile triggers full recompile"
|
|
make
|
|
take_build_snapshot
|
|
touch Makefile
|
|
make
|
|
# similar to previous test
|
|
assert_rebuilt newlib/syscall_table.o
|
|
assert_rebuilt nvs_flash/src/nvs_api.o
|
|
assert_rebuilt freertos/xtensa_vectors.o
|
|
|
|
print_status "print_flash_cmd target should produce one line of output"
|
|
make
|
|
test $(make print_flash_cmd V=0 | wc -l | tr -d ' ') -eq 1
|
|
|
|
print_status "Can include/exclude object files"
|
|
echo "#error This file should not compile" > main/excluded_file.c
|
|
echo "int required_global;" > main/included_file.c
|
|
echo "COMPONENT_OBJEXCLUDE := excluded_file.o" >> main/component.mk
|
|
echo "COMPONENT_OBJINCLUDE := included_file.o" >> main/component.mk
|
|
echo "COMPONENT_ADD_LDFLAGS := -l\$(COMPONENT_NAME) -u required_global" >> main/component.mk
|
|
make
|
|
git checkout main/component.mk
|
|
rm main/{included,excluded}_file.c
|
|
|
|
print_status "Can include/exclude object files outside of component tree"
|
|
mkdir -p extra_source_dir
|
|
echo "#error This file should not compile" > extra_source_dir/excluded_file.c
|
|
echo "int required_global;" > extra_source_dir/included_file.c
|
|
echo "COMPONENT_SRCDIRS := . ../extra_source_dir" >> main/component.mk
|
|
echo "COMPONENT_OBJEXCLUDE := ../extra_source_dir/excluded_file.o" >> main/component.mk
|
|
echo "COMPONENT_OBJINCLUDE := ../extra_source_dir/included_file.o" >> main/component.mk
|
|
echo "COMPONENT_ADD_LDFLAGS := -l\$(COMPONENT_NAME) -u required_global" >> main/component.mk
|
|
make
|
|
git checkout main/component.mk
|
|
rm -rf extra_source_dir
|
|
|
|
print_status "Can build without git installed on system"
|
|
clean_build_dir
|
|
# Make provision for getting IDF version
|
|
echo "IDF_VER_0123456789_0123456789_0123456789" > ${IDF_PATH}/version.txt
|
|
echo "project-version-w.z" > ${TESTDIR}/template/version.txt
|
|
# Hide .gitmodules so that submodule check is avoided
|
|
[ -f ${IDF_PATH}/.gitmodules ] && mv ${IDF_PATH}/.gitmodules ${IDF_PATH}/.gitmodules_backup
|
|
# Overload `git` command
|
|
echo -e '#!/bin/bash\ntouch ${IDF_PATH}/git_invoked' > git
|
|
chmod +x git
|
|
OLD_PATH=$PATH
|
|
export PATH="$PWD:$PATH"
|
|
make
|
|
[ -f ${IDF_PATH}/git_invoked ] && rm ${IDF_PATH}/git_invoked && failure "git should not have been invoked in this case"
|
|
rm -f ${IDF_PATH}/version.txt git
|
|
rm -f ${TESTDIR}/template/version.txt
|
|
[ -f ${IDF_PATH}/.gitmodules_backup ] && mv ${IDF_PATH}/.gitmodules_backup ${IDF_PATH}/.gitmodules
|
|
export PATH=$OLD_PATH
|
|
|
|
print_status "Rebuild when app version was changed"
|
|
take_build_snapshot
|
|
# App version
|
|
echo "project-version-1.0" > ${TESTDIR}/template/version.txt
|
|
make
|
|
assert_rebuilt ${APP_BINS}
|
|
print_status "Change app version"
|
|
take_build_snapshot
|
|
echo "project-version-2.0(012345678901234567890123456789)" > ${TESTDIR}/template/version.txt
|
|
make
|
|
assert_rebuilt ${APP_BINS}
|
|
assert_not_rebuilt ${BOOTLOADER_BINS} esp32/libesp32.a
|
|
|
|
print_status "Re-building does not change app.bin"
|
|
take_build_snapshot
|
|
make
|
|
assert_not_rebuilt ${APP_BINS} ${BOOTLOADER_BINS} esp32/libesp32.a
|
|
rm -f ${TESTDIR}/template/version.txt
|
|
|
|
print_status "Get the version of app from git describe. Project is not inside IDF and do not have a tag only a hash commit."
|
|
make >> log.log || failure "Failed to build"
|
|
version="App \"app-template\" version: "
|
|
version+=$(git describe --always --tags --dirty)
|
|
grep "${version}" log.log || failure "Project version should have a hash commit"
|
|
|
|
print_status "Build fails if partitions don't fit in flash"
|
|
sed -i.bak "s/CONFIG_ESPTOOLPY_FLASHSIZE.\+//" sdkconfig # remove all flashsize config
|
|
echo "CONFIG_ESPTOOLPY_FLASHSIZE_1MB=y" >> sdkconfig # introduce undersize flash
|
|
make defconfig || failure "Failed to reconfigure with smaller flash"
|
|
( make 2>&1 | grep "does not fit in configured flash size 1MB" ) || failure "Build didn't fail with expected flash size failure message"
|
|
mv sdkconfig.bak sdkconfig
|
|
|
|
print_status "sdkconfig should have contents of both files: sdkconfig and sdkconfig.defaults"
|
|
make clean > /dev/null;
|
|
rm -f sdkconfig.defaults;
|
|
rm -f sdkconfig;
|
|
echo "CONFIG_PARTITION_TABLE_OFFSET=0x10000" >> sdkconfig.defaults;
|
|
echo "CONFIG_PARTITION_TABLE_TWO_OTA=y" >> sdkconfig;
|
|
make defconfig > /dev/null;
|
|
grep "CONFIG_PARTITION_TABLE_OFFSET=0x10000" sdkconfig || failure "The define from sdkconfig.defaults should be into sdkconfig"
|
|
grep "CONFIG_PARTITION_TABLE_TWO_OTA=y" sdkconfig || failure "The define from sdkconfig should be into sdkconfig"
|
|
rm sdkconfig sdkconfig.defaults
|
|
make defconfig
|
|
|
|
print_status "Empty directory not treated as a component"
|
|
mkdir -p components/esp32
|
|
make || failure "Failed to build with empty esp32 directory in components"
|
|
rm -rf components
|
|
|
|
print_status "If a component directory is added to COMPONENT_DIRS, its subdirectories are not added"
|
|
mkdir -p main/test
|
|
touch main/test/component.mk
|
|
echo "#error This should not be built" > main/test/test.c
|
|
make || failure "COMPONENT_DIRS has added component subdirectory to the build"
|
|
rm -rf main/test
|
|
|
|
print_status "If a component directory is added to COMPONENT_DIRS, its sibling directories are not added"
|
|
mkdir -p mycomponents/mycomponent
|
|
touch mycomponents/mycomponent/component.mk
|
|
# first test by adding single component directory to EXTRA_COMPONENT_DIRS
|
|
mkdir -p mycomponents/esp32
|
|
touch mycomponents/esp32/component.mk
|
|
make EXTRA_COMPONENT_DIRS=$PWD/mycomponents/mycomponent || failure "EXTRA_COMPONENT_DIRS has added a sibling directory"
|
|
rm -rf mycomponents/esp32
|
|
# now the same thing, but add a components directory
|
|
mkdir -p esp32
|
|
touch esp32/component.mk
|
|
make EXTRA_COMPONENT_DIRS=$PWD/mycomponents || failure "EXTRA_COMPONENT_DIRS has added a sibling directory"
|
|
rm -rf esp32
|
|
rm -rf mycomponents
|
|
|
|
print_status "All tests completed"
|
|
if [ -n "${FAILURES}" ]; then
|
|
echo "Some failures were detected:"
|
|
echo -e "${FAILURES}"
|
|
exit 1
|
|
else
|
|
echo "Build tests passed."
|
|
fi
|
|
}
|
|
|
|
function print_status()
|
|
{
|
|
echo "******** $1"
|
|
STATUS="$1"
|
|
}
|
|
|
|
function failure()
|
|
{
|
|
echo "!!!!!!!!!!!!!!!!!!!"
|
|
echo "FAILURE: $1"
|
|
echo "!!!!!!!!!!!!!!!!!!!"
|
|
FAILURES="${FAILURES}${STATUS} :: $1\n"
|
|
}
|
|
|
|
TESTDIR=${PWD}/build_system_tests_$$
|
|
mkdir -p ${TESTDIR}
|
|
# set NOCLEANUP=1 if you want to keep the test directory around
|
|
# for post-mortem debugging
|
|
[ -z ${NOCLEANUP} ] && trap "rm -rf ${TESTDIR}" EXIT KILL
|
|
|
|
SNAPSHOT=${TESTDIR}/snapshot
|
|
BUILD=${TESTDIR}/template/build
|
|
|
|
# copy all the build output to a snapshot directory
|
|
function take_build_snapshot()
|
|
{
|
|
rm -rf ${SNAPSHOT}
|
|
cp -ap ${TESTDIR}/template/build ${SNAPSHOT}
|
|
}
|
|
|
|
# verify that all the arguments are present in the build output directory
|
|
function assert_built()
|
|
{
|
|
until [ -z "$1" ]; do
|
|
if [ ! -f "${BUILD}/$1" ]; then
|
|
failure "File $1 should be in the build output directory"
|
|
fi
|
|
shift
|
|
done
|
|
}
|
|
|
|
# Test if a file has been rebuilt.
|
|
function file_was_rebuilt()
|
|
{
|
|
# can't use [ a -ot b ] here as -ot only gives second resolution
|
|
# but stat -c %y seems to be microsecond at least for tmpfs, ext4..
|
|
if [ "$(stat -c %y ${SNAPSHOT}/$1)" != "$(stat -c %y ${BUILD}/$1)" ]; then
|
|
return 0
|
|
else
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
# verify all the arguments passed in were rebuilt relative to the snapshot
|
|
function assert_rebuilt()
|
|
{
|
|
until [ -z "$1" ]; do
|
|
assert_built "$1"
|
|
if [ ! -f "${SNAPSHOT}/$1" ]; then
|
|
failure "File $1 should have been original build snapshot"
|
|
fi
|
|
if ! file_was_rebuilt "$1"; then
|
|
failure "File $1 should have been rebuilt"
|
|
fi
|
|
shift
|
|
done
|
|
}
|
|
|
|
# verify all the arguments are in the build directory & snapshot,
|
|
# but were not rebuilt
|
|
function assert_not_rebuilt()
|
|
{
|
|
until [ -z "$1" ]; do
|
|
assert_built "$1"
|
|
if [ ! -f "${SNAPSHOT}/$1" ]; then
|
|
failure "File $1 should be in snapshot build directory"
|
|
fi
|
|
if file_was_rebuilt "$1"; then
|
|
failure "File $1 should not have been rebuilt"
|
|
fi
|
|
shift
|
|
done
|
|
}
|
|
|
|
# do a "clean" that doesn't depend on 'make clean'
|
|
function clean_build_dir()
|
|
{
|
|
rm -rf --preserve-root ${BUILD}/*
|
|
}
|
|
|
|
cd ${TESTDIR}
|
|
run_tests
|